Adjusting Anzo headlights on a OBS

park your vehicle approximately 25 from a wall or a building. make sure the surface is flat. use painters tape to mark where the headlights are currently at. then adjust the headlights using the screw on the back. make sure the lights hit around the height of a cars side mirrors. usually around 53 inches in height.

[@jeffclifton2863]

There is up and down and left and right on most others

[@user-jd4un8mz3p]

Did you turn them right or left to move the light up

[@revelation6_8]

If you are looking at the back part of the headlight turn it clockwise to raise it up and counter clockwise to lower it. Also there are arrows next to it telling you the direction

[@johnwesleyhardin9747]

I put Anzos in a 2003 VW diesel jetta. They are a piece of crap. They cannot be adjusted as far as I can tell. It appears that they turn orbitally with one adjustment. So the drivers side headlight points to the right and the passenger light points to the left. So when you adjust them they never meet in the middle or even close. So theres always a large dark spot in the middle of the road where you need to see.!!! If you adjust them down the dark spot gets bigger. If you adjust them up theres still a dark spot and there pointing up in the sky. You cannot replace the bulbs unless you remove the shroud and take the whole housing out !

[@revelation6_8]

So far I haven't had any problems with mine, no dark spots or dimming issues either. I'm wondering if you just got a defect set. Or maybe just that make and model. See if you can send them back and get a refund.

[@johnwesleyhardin9747]

Thanks for the reply. I cant seem to find any info on adjusting them or customer service support. I wonder if tthere is a stop or you can keep turning them till they go around again. I am going to have to take them out to find out what type of bulbs are in there so I can upgrade to LED lights. They are just not bright at all.This involves removing the shroud and the light housing.

[@revelation6_8]

@johnwesleyhardin9747 yeah mine didn't have any instructions on how to adjust either. I had to mess with it and figure it out. I would definitely contact the company and ask for further assistance

[@johnwesleyhardin9747]

I emailed their customer service dept. I bought these because I saw a guy on youtube that put them in his jetta., before he put them in he used HID in the Projector and LED in the reflector.and wired in a fog that's in the Anzo.. So my intentions are to upgrade the lights anyways.@@revelation6_8