🔧 Adjusting this WINDOWS setting to get MORE FPS & Lower Latency (upto 15%)

[@Panjno]

Let me know YOUR results below!

[@lordgallo4213]

Panjno, we need a new video on windows 11 optimization tweaks for smooth gaming , and removal of all sorts of bloatware in it.

[@rnsronin9916]

value 15 works for me just fine! ultra smooth game play on apex legends thx mate!

[@berryvr7184]

So all this is doing, is adjusting your windows priority for certain programs? Why not just do a video on a program called Process Lasso Pro? its basically the god version of task manager for your computer. You can get CPU priority, CPU affinity, I/O priority, Memory priority and it even comes with its own Power Plan for windows. Its an amazing software and it basically does everything I see in most "Optimize your PC for gaming" videos.

[@M2AS-C]

I got like 15 more frames thx

[@silfrido1768]

@@M2AS-C what game are you running at what did value did you use before launching the game ? this matters because each value corresponds to said value differently depending on the game engine & other factors

[@alexanderenriquez7954]

I tried this on my pc which has a Ryzen 7 5800x and RTX 3060ti with 16 gb of ram at 3200 mhz, ran a test on 16, 2a, and 15. One test with the cpu undervolted and one without an undervolt. To my surprise the undervolted 2a and 15 performed better than the stock settings with 2a and 15. 16 was the only one that performed well and it performed better than all the other tests. I tested with the MW2 benchmark since that’s the game I’m currently playing right now. To verify, I also played a game on the same maps and 16 no undervolt still performs great. Noticeable latency decreases from the average pc latency in GeForce Experience. Before I changed, the latency was at 17ms after it was at 12-13ms which is significantly better. FPS seemed much more stable on High settings with FSR 2.1 balanced, before the fps would randomly drop to 115-125 fps but after using 16 it doesn’t drop too far down or stutter anymore. Avg fps is now 150-165.

[@TIMERloks]

I have same cpu with a 2070 super you think you can help me do it

[@positivegamer3978]

Hello I have this for you 2A Hex = Short, Fixed , High foreground boost. 29 Hex = Short, Fixed , Medium foreground boost. 28 Hex = Short, Fixed , No foreground boost. 26 Hex = Short, Variable , High foreground boost. 25 Hex = Short, Variable , Medium foreground boost. 24 Hex = Short, Variable , No foreground boost. 1A Hex = Long, Fixed, High foreground boost. 19 Hex = Long, Fixed, Medium foreground boost. 18 Hex = Long, Fixed, No foreground boost. 16 Hex = Long, Variable, High foreground boost. 15 Hex = Long, Variable, Medium foreground boost. 14 Hex = Long, Variable, No foreground boost.

[@RandalReid]

Hi, when you say "fixed" and "variable", what do you mean by that?

[@kyukyuproductions8029]

🔔🔔

[@alphix75]

Lmk

[@RebellionBloodshed]

Why i'm doing this i just play indie games xd

[@RandalReid]

@BT-47 Thanks for the clarification. I had a similar idea but I wasn't sure.

[@omerakgoz34]

The stock default value is 26(38) for normal windows and 24(36) for server editions. 2 is not a valid value but with the default settings it equals to 26(38). Valid values are these (in decimal): 20 = Long, variable, no foreground boost (12:12) 21 = Long, variable, 2x foreground boost (24:12) 22 = Long, variable, 3x foreground boost (36:12) 24 = Long, fixed (36:36) --> [server default, optimizes background processes] 36 = Short, variable, no foreground boost (6:6) 37 = Short, variable, 2x foreground boost (12:6) 38 = Short, variable, 3x foreground boost (18:6) --> [windows default, optimizes foreground processes] 40 = Short, fixed (18:18) The numbers in parateses are the amount of quantum time CPU will give for the processes. Higher quantum = more performance. 22 gives even higher quantum than the default value for foreground apps. In practice, 22 is the best for games but depends on the game and other programs you use.

[@Freemasons1732]

Actually, after a clean windows install, it has the value set to 2. But when you switch to background it becomes 18 and back to programs it goes to 26. I dont know why it uses 2 unless you change it. It even says its on programs, but all you have to do select background then back to programs and apply for it to disappear. The only way to make it 2 again is to set it manually or use process Lasso and use "let windows decide".

[@RicardoMilosGachi]

What about competitive games? 22 has insanely bad mouse feeling in compare to 25 value

[@omerakgoz34]

​@@RicardoMilosGachi I play valorant with 22 for a long long time and I have no issues at all. I play on low graphics settings. I've played with ryzen 1600AF and 5800X3D on a 165hz display.

[@RicardoMilosGachi]

Now change it to 25 or 40 and see the insane 'TenZ' be like flicks you can make. To me the difference is night/day, so I usually stick to 16(22) for single player games, while 25/40 for competitive@@omerakgoz34

[@AethiIdor]

'25' was the best for me (Ryzen 5 5600 - 3060 TI) I did 5 minute captures while I played 3s in Rocket League. Average FPS - 657.3, 1% lows - 395.8, and 0.2% lows - 325 which was a pretty big improvement over default. By default it was set to 2. Average FPS was 502.3, 1% lows - 305.8, and 0.2% lows - 253.4 Thanks Panjno

[@dontaystip3305]

which one better 25 or 15?

[@jotunbjorn]

What resolution are running RL? I get horrid stutters at 1440p but 1080p is fine.

[@AethiIdor]

@@dontaystip3305 So far for 25 was, but it may be different for everyone else cause we all have different hardware and software we run.

[@TheNamesJT]

rocket league most important metric to measure is input lag especially if your using a controller on your pc

[@vaan_dex7728]

Panjno please make a video on power limiting for Intel CPU’s that cannot undervolt.❤

[@asaqibs]

+1

[@maxsheva193]

Default: Optimize Performance for Applications: 32 + 4 + 2 = 38 Dec / 26 Hex = Short Quantum, Variable Quantum for foreground, High foreground boost. Optimize Performance for Background Services: 16 + 8 + 0 = 24 Dec / 18 Hex = Long Quantum, Fixed Quantum, No foreground boots. Variations: 32 + 8 + 2 = 42 Dec / 2A Hex = Short, Fixed , High foreground boost. 32 + 8 + 1 = 41 Dec / 29 Hex = Short, Fixed , Medium foreground boost. 32 + 8 + 0 = 40 Dec / 28 Hex = Short, Fixed , No foreground boost. 32 + 4 + 2 = 38 Dec / 26 Hex = Short, Variable , High foreground boost. 32 + 4 + 1 = 37 Dec / 25 Hex = Short, Variable , Medium foreground boost. 32 + 4 + 0 = 36 Dec / 24 Hex = Short, Variable , No foreground boost. 16 + 8 + 2 = 26 Dec / 1A Hex = Long, Fixed, High foreground boost. 16 + 8 + 1 = 25 Dec / 19 Hex = Long, Fixed, Medium foreground boost. 16 + 8 + 0 = 24 Dec / 18 Hex = Long, Fixed, No foreground boost. 16 + 4 + 2 = 22 Dec / 16 Hex = Long, Variable, High foreground boost. 16 + 4 + 1 = 21 Dec / 15 Hex = Long, Variable, Medium foreground boost. 16 + 4 + 0 = 20 Dec / 14 Hex = Long, Variable, No foreground boost.

[@maxsheva193]

@Obese boy123 The foreground process is that which has the keyboard and mouse focus. This means there is only ever one foreground process at a time, per user session. Windows already applies foreground boosting by giving the foreground thread longer time slices. Further increasing the priority of the foreground process and/or the specific foreground thread is not only ineffective, but harmful. Remember, giving a process a higher priority does not mean it will run faster. It simply means if several processes are active at once, it will have a higher precedence. However, if any single process has too high a precedence over other processes, as foreground boosting would result in, complications can occur.

[@Freemasons1732]

I just did a clean windows 11 pro install and its on just 2. Not 2A. It used to be 26 before i did a reinstall. Not quite sure why but im qurious to see if it gets worse or better changing it back to 26, or 2A not just 2. Whats the difference between 2 and 2A?

[@shanegarner6031]

​@@maxsheva193 what would be the best one for low latency gaming?

[@maxsheva193]

@@shanegarner6031 it's personal, for me 26 is best.

[@mwadhinanamalemo]

I aint reading alat

[@ComfiCharlie]

ive been using ur guides for years now and ive only really gaind small boosts but this one gave me a whole extra 30fps to forza sitting at a nice 114 average holy ty man

[@RandalReid]

What value did you use?

[@ComfiCharlie]

@@RandalReid 16

[@RandalReid]

@@ComfiCharlie Ah I see. Thanks!

[@karimdaher5367]

Gonna try this as soon as I get home, thx for this incredible content!

[@medusagg]

ive been using all of your method for optimization, but this one make huuuuuuuugeee impact. finally i can play valorant so smooothhh

[@Gaptoo]

26 Hex did it for me. Heaven Bench went from 9150 to 9215. Low FPS gained 6%. Ryzen 5800x, RTX 3070, 32 Gig DDR 3600. Thank you

[@deluxebulls5939]

That isn't even a 1% gain

[@johnarvanitis9328]

Testing this tweak on 2 different systems (a bloated one with background programs and a highly optimized one) gathered some interesting results. The bloated one performed better with the "gaming" values and the optimized one performed better with the "productivity" values. Gaming values had no effect on the debloated optimized system, 26 and especially 2a gave a significant boost to input responsiveness and eliminated any microstuttering. Same effect on the bloated one with the value 16. Apparently on a highly optimized system gaming values do nothing because quantum and foreground boosts are already focusing on the game you're playing. Using a "background apps" value seems to improve overall performance thoughput somehow. Both systems use zen 3 Ryzens btw.

[@ryan-dl8rp]

if im using a custom debloated windows 10 iso should i use 2a?

[@flightsimdev]

You have to be the best on KZbin, I started with 2 my results were in Heaven max 101 / 1% 83 / 0.2% 34.9 I changed registry to 2A and WOW just WOW, Max was the same within 1-2 frames, but 1% was 83, and 0.2% was 82, thanks dude, I gave you a sub for this, just brilliant, I did try 16 and 18 but were worse, I run an AMD Ryzen 7 Pro 4750G and Intel Arc A750 on a X570 Taichi motherboard 👍

[@eXSPLY]

when you change the value in regedit, advanced settings goes back to the background option, if you then reselect programs it resets the regedit

[@lofigamervibes]

same issue for me... System Properties > Performance Options > Advanced > select Programs and it reverts back to Background services every time I reboot my PC. I tried logging in as a local admin account as well and changing the setting there, but it didn't help.

[@haithamnweran8658]

yea same here i dont how its working for some people

[@__MU_MU__]

​@@lofigamervibes Дело в том, что реестр имеет приоритет над настройками в рабочем столе, если в реестре win32separation указан в шестнадцатизначном числе:00000026 то работает на программы, если в десятичной указан 26, то переводит на фоновые режимы Идите в реестр)

[@lofigamervibes]

@@__MU_MU__ Спасибо

[@ximenachazarreta6744]

​@@__MU_MU__ How much value should I place? So that it prevents the values ​​from being automatically changed and returned to 26?

[@konffen]

Used CapFrameX on the entire FPS Benchmark map (112 seconds btw) and default value "2" performs best for me, also Ryzen 5600X, 2 wins over the value "16" it's 0.7-1.9% better on 1% lows and 3.6-4.8% on 0.2% lows. Also found out some other tweak previously had changed my value to some high productivity value 26.

[@Abi_207]

Which value should i put ????? I have i7 4th gen and gtx 970

[@thor.halsli]

@@Abi_207 on my 4770/(gen), the best was 14. Got about 5% better fps due to better cpu utilization

[@Pyxllozen]

This is the only youtuber that i can trust when optimizing my garbage pc

[@BlackGoku-u3i]

Bro you are awesome you helped me so much thanks and keep growing 💗💞💞

[@AlexitoCR10_]

Thank you so much. As soon as I changed the setting (15) and returned to my game, I noticed a huge difference in the reduction of stuttering and input lag. RTX 3070 TI Ryzen 7 5800x

[@GoatHerpies]

15 helped my double shot bug in game for win prio. My god I’m so happy I watched this

[@beri4138]

Wow this priority seperation thing is such a rabbit hole I wish I never discovered

[@Pinselmacher]

Hahahaha i swear!

[@dco1019]

word.. cause everybody has other values

[@check4566]

Panjno you are the don! ❤️🔥

[@Tina.Di.Napoli]

Wow, two of my games stopped micro stuttering completely. This is really helpful 💖

[@momensaber1189]

What was the value you put?

[@Tina.Di.Napoli]

@@momensaber1189 16

[@SayandeepDuttaiscream]

What's your cpu and gpu ?

[@gabrieldigregorio2640]

Super smooth!! Value 15 in Core i5 4690k and rx470! Thank you so much!

[@jeyemmendoza77]

same to me bro the best value for me is 15

[@jeyemmendoza77]

i5 9400f with gtx 960 2gb

[@wilihey1425]

for people wondering, im using windows 11 on a very unbloated system, i literally removed windows defender etc, i ran unigine with every number in the regedit, heres the results unigine heaven ultra extreme 14 : average 105 min 45 max 236 score 2638 15 : average 105 min 46 max 236 score 2641 16 : average 105 min 42 max 237 score 2640 2 : average 105 min 44 max 237 score 2639 24 : average 105 min 45 max 237 score 2641 25 : average 105 min 44 max 236 score 2640 26 : average 105 min 45 max 238 score 2641 2A : average 105 min 45 max 236 score 2641 there isnt that big of a difference, ig i'll use 15 cause it had the best max and minimum framerate but it barely impacted anything

[@gamertechlive1780]

Its because that's not really utilizing CPU that's for benching GPU... its better to use CPU bound games for testing

[@hawkassassin2702]

What value is best for r5 5600 and rx 580 8 gb

[@EmmaDuchess]

Played some fortnite 60 seconds each time with my GTX 1650 and i5-12400f , 15 got me the best performance; Average - 131.1, 1% low Average - 55. Meanwhile I had 26 previously which got me = Average - 126.2, 1% low Average - 46. Quite the large bump in 1% low average and a bit more average fps too. My setup isn't the strongest or best but it works and I'm glad still! Thx Panjno!

[@09ium.]

i have a 1660 super what do you recommend?

[@Chlrintruc]

It's different for different games. In my PC 2a was best for mass effect 2 while for mass effect 3 it was 26. BTW I noticed a 20% increase in ME3 and good improvement in ME 2 aswell.

[@thor.halsli]

14 did it for me. On an old 4770. Got about 5% more fps in Warhammer 3 due to better cpu utilization

[@theboy2777]

Hmm... what actually stopped all micro stutters in games for me was to enable gsync+vsync on in the nvidia control panel, set "virtual pre rendered frames" to "let the 3D application decide" and turning Low latency mode to ULTRA and threaded optimization to OFF. Cap FPS to -3 my monitors refresh rate using RTSS because with my observation nvidias framerate limiter causes Frametime spikes which means micro stutters which RTSS does not, also GPU scheduling enabled in the windows settings and also disabling HPET. With having done all of this my pc runs flawless with RARELY ever seeing any micro stutters. For context my rig is a Ryzen 7 5800x, 16gb 3200 mhz ram, RTX 3080. Oh and i use "creator mode+PBO" in ryzen master i dont know if that helps as well but with all of these enabled its been hella smooth.. Edit:TURNING OFF Low latency mode helps with frametime spikes, sorry i forgot to mention that. use OFF not ultra.

[@joaquinbuena8541]

Joaquin Buena hace 1 segundo Hi!, which games do you play with that config?. Thanks in advance!.

[@theboy2777]

@@joaquinbuena8541 I play every game honestly, Triple A title games to esports games like valorant and apex

[@majkooll]

That what I’m using too and it’s a great way to play even if it’s a little higher with input lag but with good rig it’s not a bog difference. Btw. if game has Nvidia Reflex + boost in video settings you than no need to set it in nvidia panel. GSync + vsync is banger!

[@DeadlyDragon935]

Lol all those combined sounds like latency nightmare and I dont understand why your using vsync if your using rtss

[@theboy2777]

@@DeadlyDragon935 a lot of you people hear the word "sync" and immediately begin to talk about things you dont even know. Per Blurbusters, which is a reliable source by the way, if you use gsync + vsync and cap fps 2-3 fps below your refresh rate its the smoothest experience with MINIMAL input delay, as in BARELY noticeable. its fine if your one of those guys who dont mind the little screen tearing in exchange for extreme low latency but what you dont understand is vsync+gsync with fps cap is the SMOOTHEST experience. If you use a fps cap without any gsync of vsync you still get minor tearing. with gsync+vsync enabled it removes ALL tearing

[@kurisujinsei]

My default was 2 but when i changed it to 2A it was a huge difference in performance thanks for this awesome setting!

[@waynedoo7442]

18 seems best for my system. Cyberpunk Benchmark my 1% lows went from 67 to 98, max fps from 221 to 254, the average FPS stayed pretty much the same.

[@einfachernico2332]

Same for me, 18 worked great at 1% Lows and avg. FPS

[@lasalnacc]

not the video we wanred, but the video we needed.

[@Ataraxia95]

Would playing a match of COD and a match of Team Rumble in Fortnite be a good test for each setting?

[@CarlosAustin]

noticed you had on your screen Vegas. What priority control value do you use for this? Thank you

[@910FilmzZ]

Do a updated escape from tarkov FPS boost video please

[@Frosty-dr8bs]

Most common seem to be 16, 2, 26, 2A

[@chk_g]

Any value besides 26, changes the processor scheduling to "background services", instead "programs". Is this right?

[@ximenachazarreta6744]

How much value should I place? So that it prevents the values ​​from being automatically changed and returned to 26?

[@chk_g]

​@@ximenachazarreta6744 do you put any number and click em "programs"? If you does it, the value returned to 26. I think "2" and "28" don't changes back and keep "programs" selected, but I don't tested for real to see any differences.. actually, I keep the 26.

[@Mandelabxng]

best for rtx 3060 + r5 3600 16 gb of ram?

[@Ziiiko]

RX 6700 XT - Ryzen 5600X value of 14 was the clear winner also feels more responsive compared to my worst value

[@RS_Redbaron]

I cant help it but to put this man on 0.75 play speed hahahaha :p thx for the amazing video's like always mr.

[@popcorn4465]

i always do LOL

[@MrGrokthis]

Ha! Me too. He’s way too fast for this simpleton (me).😂

[@RS_Redbaron]

looking for things and doing and listening hahaha 0.25 just enough to think hahah

[@bryan_17fl]

jaja same everytime

[@lofigamervibes]

Both steps keep reverting upon reboot for me. System Properties > Performance Options > Advanced > select Programs and it reverts back to Background services every time I reboot my PC. I tried logging in as a local admin account as well and changing the setting there, but it didn't help. And that seems to cause the Hex value to also revert back to 26 even though I keep setting it to 2a. I edited the correct Reg (as administrator) for both within the CurrentControlSet and ControlSet001 but keep reverting.

[@__MU_MU__]

Вы запускали от имени администратора?

[@craigyboy4321]

Use this to just copy and paste Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\PriorityControl

[@ItSmeSanThu]

It's controlset01 as per the video

[@__MU_MU__]

​@@ItSmeSanThu везде меняется

[@Skynet7898]

Definitely improved my gaming experience

[@PURIVERSE]

I have applied the settings from your gta 5 optimisation video but i don't got the results as it should but when i tried to revert all registries and other things then after that my gta 5 start stuttering and sound stuttering problem and not only in gta 5 , my all games start stuttering and ingame sounds also please tell me the solution please😢

[@iEternalnite]

I noticed that these two settings are linked. If I change the setting to focus on programs, it'll change the registry value to 26. If I change the registry value it focuses on background services. Is that supposed to happen?

[@longkimnguon9999]

OH THAT HAPPENED TO ME TOO! IT SELECTS as your best value by itself

[@iEternalnite]

@@longkimnguon9999 PositiveGamer commented on what some of the values do. My best guess is to let it auto-select the best value for programs or test some of the values he listed.

[@Rainyalley]

I have 8gbs of ram, 128 ssd and 500gb hdd, what's the best size i should set my pagefile to ? and should it be on both ssd and hdd or just ssd

[@ahmedgamal880]

+1

[@rocket2739]

Set pagefile to automatic on the SSD. deactivate it for the HDD

[@Cheeseypoofs85]

disclaimer. you shouldnt mess with the registry if you dont know what you are doing. you can break windows

[@Velheibgnar]

What is best for League of Legends and/or Diablo 4? Ryzen 5600+3060

[@tuuevccDatDood1]

I recommend trying hexadecimal 16, 1A, 2A, 26, 24, 28 and 18

[@KANCIAPAGAMINGROOM]

What software do you use to Edit videos?

[@TheNamesJT]

I don't know but Cap Frame X is making my one monitor constantly go black constantly like its turning off but not really turning off. I don't know how to fix this so just going to have to not use that program

[@lvl37magikarp22]

switching processor scheduling to programs then going to regedit and trying to switch the number to 16 but it always switches it back to background services and puts it on 26 when its on programs. Everytime i switch it back to 16 it goes back to background services

[@lucassena6453]

hello, what is the best value for counter strike? +Fps and -input lag

[@humer101]

Thank you for your time; my works better at 12 5800x3d+RTX 4090 at 3440x1440. My 1% low, when up 9%, is significant.

[@straik5963]

How much has pc latency decreased?

[@hectordtb642]

what value would be better for the i5 11400f with and rtx 2060?

[@wodan1736]

i have a gaming laptop with the i5 9300h and a gtx 1660ti 6gb which is the best value ?

[@lotfi5404]

Hey i just wanted to ask eventhough its off topic but maybe ill find someone here that knows a fix, so long story my nvidia drivers do not detect my monitor plugged on display port at all, i tried every possibe thing, clean nvidia driver’s install tried multiple versions, try installing clean version of windows tried linux it worked but as soon as o downloaded the nvidia proprietary drivers the display port stopped working again, mind you that both the monitor and cable because when i uninstall the driver the display port works again, so i dont what to do anymore the driver refuses to detect monitors on display port .

[@chuike5222]

Enable ddc/ci on your monitor

[@McDaniel4wd]

13th gen i9 mobile: going from 2 (stock) to 16 on the registry: average; fps went from 243.9 to 300.1 and lows jumped a stupid amount as well. This is in MCC highest settings in 4k Older game so so it’s not gpu bound. Very satisfying

[@bibog2390]

Any recommended value for my old setup please? i3 4150 SSD 8gb ram GTX1650 Super

[@ollyplays9685]

Does anyone know what could be the best for i7 12700KF paired with 2080 ti?

[@jzukill8607]

I need help. What is the best value data for OBS streaming while gaming for Win32PrioritySeparation? currently using Ryzen 5 5500 + rx580.

[@punkm0nk]

28

[@mustimusti-ze4kz]

but a question do we have to always change it for every game we play like for warzone 2 i dont know what the best i have a gtx 1650 and 10300h intel core i5 pls someone help

[@mohamedfalih7357]

what is best power plane on low end devise ?ulitimate performence or high perfomence?

[@judydagreat6087]

High performance since ultimate is for mid to high end pcs PS I am not a geek but that is what u know

[@mohamedfalih7357]

@@judydagreat6087 thanx

[@lvl37magikarp22]

so i think the numbers that start with 1 are for both background and apps/multi-tasking and the 2's are for gaming

[@LuisLopez-ry1jl]

What would be the bus number for a 1030 ti

[@mrlucky704]

Any idea what value would be best for fortnite, 3080ti/i9/32gb

[@JaimeLacayoPTY]

How do you find this stuff!! Amazing man.

[@Xocnap-st7lg]

Anyone else needs to re enter the Win32PrioritySeparation because every restarts it gets back to 2 (default), any help so it stays at a different number?

[@YoovalR6]

what happens if id use a value over 40 (i saw it as the most recommended online)?

[@__MU_MU__]

Если у вас топовое железо, то все ресурсы будет забирать на игру, фоновые приложение будут 😢

[@YoovalR6]

@@__MU_MU__ i see, ty

[@DeadlySwords8]

mine was default set to 26. what happens if i got down to 16 since in the chart is labled "best for gaming."

[@Picobeat]

im always playing while watching something, being a stream on twitch or something on netflix, will that impact it? i want the best fps my old gtx 970 can give me but i also dont want to watch something stuttering

[@uzairahmed9857]

I have amd radeon dual core with 4gb of ram. Which hex value is best for me tell me panjno pls

[@petrari2157]

Hi, nice video... Only one note - app with name Lasso do it same and lots of more things dynamically for different tasks... Result is simpler and better... You can try a compare result

[@vendetta0554]

Keep the value at default if you undervolted your cpu. My system became unstable after this. It was stable 2+ years.

[@TimberWulfIsHere]

It's likely that your undervolt is not stable

[@vendetta0554]

@@TimberWulfIsHere It was stable. After changing to the default or a value with no foreground boost (28, 24, 18 or 14) everything was stable again. I have settled with 28 because it gave me the most consistent frametimes among those values but i did not experience any change in performance. (5800x uv with project hydra values for curve optimizer, 3080 10gb Asus TUF 1845mhz @825mv afterburner)

[@TimberWulfIsHere]

@@vendetta0554 did you use core cycler to be certain of that?

[@vendetta0554]

@@TimberWulfIsHere Yes i did use it.

[@TimberWulfIsHere]

@@vendetta0554 interesting

[@tropical1972]

Can i do this for my gaming laptop?

[@appleciderpiie]

I can not tell you how many hours it took to find this vid again after it doubled my fps in games but I had to factory reset my pc

[@marcel9684]

Why the reset?

[@expert8665]

I find it interesting almost all comments are ryzen users.

[@HunterG5]

do you have a video on cleaning ram cached my computer is using 10GB help

[@1dkwtph]

Thank you so much! '2a' was the best value for me. Went from 120fps to like over 280fps.

[@TheAlixSH]

Question for the knowledgeable amongst you, could I effectively rely on my GPU usage if I cap my frames to 144 instead of going through all that hassle with the benchmarks?

[@goldchainrosary2258]

Benchmark your system as a whole. GPU usage alone is unreliable because tweaking settings could increase GPU usage without actually increasing performance. The whole of your system determines performance. No one part of the whole should be a stand in for the whole or else you are relying on an incomplete picture.

[@7king_bradly]

This messed my laptop up, nothings loads now and the backup did not work

[@majkooll]

@panjno this is not what „game mode” in Windows 11 do?

[@ScvmmN]

what do you guys recommend for i9 12900K - 6900XT?

[@xChan666]

How did you guys test yours?

[@KANCIAPAGAMINGROOM]

I did a few test with all those settings and tbh I don't see any difference between all those values. The only difference was at first with 2A. After I did 10+ runs and tested again 2A it was one of the worst run so I don't think it will help noticiable.

[@alexys2726]

Thank you for your help. My laptop has a much faster response time now! I appreciate a lot!

[@j_rev8530]

I get an error when I try to export my reg backup any fix?

[@scottgenius9189]

More snappy movement and increased fps from 100fps to 135 fps in MW 2 on value ''16"

[@hugosalinas9485]

Bro what are your pc specs?

[@Joeybag0donuts]

Thank you!

[@Mihai_942]

where did u get the benchmark plsss

[@ezraanung6869]

do i need to rerun my games whenever I chang the values?

[@zurvivalgaming1578]

do you have to do this for each game or is this setting for all the games

[@RandalReid]

With these registry edit, you are doing this wholesale. I don't think there's even a way to do it for each game with this particular tweak.

[@VetraAscant]

16 is better for most ppl while 2a just drop my fps by 20 - 30

[@dizzy-bm5of]

is Win32PrioritySeparation overclocking ? can i know

[@TGKINGYT9]

missing options registry tell me what to do

[@NASxKASH]

tell about hyper v support for emulator applications

[@GazJ]

11 on my r5 5600x seems the best for me my frame times and stutters went away higher numbers resulted in frame times and stuttering went up

[@TheJuninholindo]

me too i think R5 5600x + 3060 ti + 32gb 3600 mhz

[@1994lopa]

I have a ryzen 9 3900 x MSI gtx 2080 and 32Gb ram, i tested 16 and 26 and see no diffrence if anyone got same spec like me pls tell me whats the best for gaming only thank you.

[@TheFlametroll]

Here's a challenge for you. How to optimize Star Wars - The Old Republic Just try pvp and watch your FPS dip from 144fps to frikken 15 fps.

[@Dougie245]

Panjno what value do u have rn on ur main gaming pc?

[@RS_Redbaron]

play video again and now listen better ;)

[@Dougie245]

@@RS_Redbaron 16?

[@RS_Redbaron]

@@Dougie245 hahahah put your time in the video not me xD

[@Dougie245]

@@RS_Redbaron i tought u knew

[@RS_Redbaron]

@@CoachD4 Hahahaha lazy people

[@doomcat5557]

Every value I tried seemed to make no change on the MW2 benchmark. For some reason, it seems like optimization guides never work as well as some people say it did for them. Guess my PC is already well optimized.

[@TheGr8Espi]

I hate to see your comment so late lol but mw2 benchmark was bugged for the longest time no matter what settings I used I got the same results across the board 😅