Adjusting Waste Gate

Learn How to Adjust Your Turbo's Wastegate. This video was created because we get so many inquiries from our customers regarding adjusting their Turbo's wastegate boost pressure. This quick tutorial will show you how easy it is to adjust your wastegate pressure. www.dieselpowersource.com/
**FOLLOW US BELOW **
Blog: dpsblogsite.wordpress.com/
Facebook: / diesel-power-source-12...
Instagram: / dieselpowersource
Ph: 801-930-8404

[@commercialrebellion9353]

First video I've found that adds the fact u can also lessen the amount of boost, most people don't realize that's important to not blow up something

[@uzileopard6199]

Was brand new to turbo’d vehicles and nobody informed me of this or had good videos, most said to take it to a shop and have it tuned but the motor and transmission for my vehicle is already forged and ready to handle the turbo since the turbo was an option for it. This video helped a lot

[@kyngahmed3667]

I guess Im asking the wrong place but does someone know a way to log back into an instagram account?? I stupidly lost my login password. I appreciate any tips you can give me.

[@milobentlee8668]

@Kyng Ahmed instablaster :)

[@kyngahmed3667]

@Milo Bentlee I really appreciate your reply. I found the site through google and Im in the hacking process now. Takes a while so I will get back to you later when my account password hopefully is recovered.

[@kyngahmed3667]

@Milo Bentlee It did the trick and I finally got access to my account again. Im so happy! Thank you so much you really help me out!

[@jasonschagt6527]

Have you done much work on the turbo that comes on the older(1996) 3406E CAT motors?

[@Brandon_Meckley]

I just picked up a used 62/65/12, so if I'm understanding this right, if I set the regulator on my compressor at 40psi and adjust the wastegate until it just starts to move at the at pressure, thats what boost I should see on my gauge, and slightly more with a spike?

[@nioks123]

let me see if i got this right ... soo im with a4 b5 1.8t and my rod is kind of different but nvm so ... the rod needs to shorten by wich i mean to push it inside the actuator thingy for more boost .. but if i pull it out from the actuator it will lower the boost ?

[@leiladaquil6587]

By tightening spring,will it not obtain over rpm? If so will it be safe?

[@eddylorenzo5033]

Perfect another video said take arm off and u helped out by ur way of doing it thanx

[@dadyo63]

Excellent vid

[@kaunghtetpaing7877]

good job

[@unfortunately_mortal]

so simpel, my life have changed...

[@carlosvillar9931]

Hi, I'm from Argentina, at how many PSI will I open the turbo whesgate valve for the Ford Ranger 3.0 model 2011?

[@tomislavknezovic1]

I want to know when you start the engine, in which position the westgate goes, open or closed

[@zimbasemuzikcharles637]

Hi I heard one of the problem of turbo oil leak,related to over-cranking as indicated by oil cap dance Question:can that be fixed?

[@akhancj9]

Would this work on Isuzu NPR turbo

[@mrsaudazhar]

0:38 deez nuts!!😂

[@sokonimwango5315]

hahahaha

[@adamsanchez2917]

Hahahahah😂😂😂

[@kevinbrazier3350]

Saud Azhar 😂😂😂😂😂

[@thundercuck1779]

I knew the first comment would be this when i heard it too.

[@MaNNeRz91]

Fucker i thought id get this in first but you beat me by a year 😂😂😂

[@josiahbutler2254]

okay so the more you tighten the screws back your way, by decreasing the length of the rod increases the psi... cool

[@jacobb4077]

0:38 HA! GOT EEM!

[@mziasolomonidze8254]

K0402

[@Twin63Amg]

Deeznuts

[@dirkdiggler9082]

Lol

[@tranxvillanueva1092]

Noooo!!

[@octaviansorescu7427]

Howdy! My turbocharger was at a repair center. I have a Wv Polo 1.2 Tdi. After reconditioned when put into operation it generates error code P2564 position sensor signal too weak. The geometry actuator contains a position sensor. I suspect that the sensor calibration was not done effectively. I understood that for the minimum there must be a value of 0.760 volts, for the maximum I do not know for sure... 3.800 volts or 4.100 volts. What can you advise me to calibrate the correct values?

[@DevonBbrown]

How do i locate the wastegate solenoid on 06 Chrysler 300

[@zacharyadammusic]

Is this safe to do in small increments ? Want to try a small increase in boost to my 2.0L cdti vauxhall astra

[@maniv100]

that literally sounds like the safest way to do this

[@TariroNgorosha]

Basically adjusting spring tension/preload to make more or less boost.

[@RafaqatNiazi253]

Will this work in perkins 5.9 L engine 230Hp

[@ConTheDon187]

Would this work on a TDO4 on a legacy GT?

[@gfysfgt4001]

Gung Ferdoosh yes

[@emeliealegonero4043]

Cool got it

[@SarmatKa777]

How to reset pressure regulator?

[@tresselwyn7594]

What size is this turbo

[@agostinodipisa7302]

Bravo

[@karlowolf05]

I only see one lugnut on mine is it safe adjust?

[@mitchellward5739]

@0:38

[@KeuzySC]

goteem

[@timbob4343]

😐

[@summedseeker1732]

Thx u so much

[@666alireza]

Turn the nutt against the waist guage for less boost and against the waist guage arm for more boost?

[@jackson5186]

In case you never found out, both nuts jammed together mean it spins the whole shaft. youll see the end is mounted to the lever which the threaded metal rod goes into. tightening the nut just spins the wastegate arm into the end linkage

[@irishlad7458]

So is this a preasurised diaphram iam sure mine is a vacume operated I see the conection is on pressurised side of turbo on your so is there 2 different types

[@shelbiemartorelli2730]

will this work on a cummins turbo

[@ryansayre892]

Yes

[@stevenpacey9020]

Deeze nuts 😂 great video thank you

[@Video-se4bh]

On a ISUZU KB 300 LX D-TEQ IF YOU tightened or make the rod shorter when it boost more will it give more power if so can someone come back to me.

[@michaelshields8750]

Yes it will

[@sparklingsams3155]

If I want 8psi how do it do it

[@jabargalaroza7979]

hey, this is the most easy & convenient and so simple..., what about those turbo that has internal wastegate adjustment??? how will your viewers learn about those types?? use?because those where the most common type of turbo's that has internal adjustments??

[@MAVRIK-ev2dc]

This is a internal wastegate

[@angelito4u16]

Will this work on factory Mercedes benz twin turbo setup? 2017 3.0L twin turbo 329hp

[@rafaelrjarquin]

No it's all electronic

[@zhr4121]

dont you think that you are giving the turbine just more rpm but the extra pressure gained its realesed by the intake circuit blow off valvve that its caalibrated to the same limit of the turbine valve???

[@strider5119]

Remove the bov.

[@standardaussie]

Good point sir, my rodeo (last of Isuzu eng) creates enough boost to actuate the bleed at half throttle lol. They be just pissing pressure away for nothing. And for those saying just remove the bov? What about internal ones spidered into the egr and exhaust sensors ect? Remove them too? I mean at that point your into thousands for different manifolds, circulation systems, exhaust sensor deletes, remaps ect to get it to run properly . All just so your car goes ssssssssss for possibly 0% gains? Have fun keeping that registered. I was going to do this videos recommendations but guess what problems I ran into? Not all cars are equal ask someone that actually knows your car first

[@marceloaguilar413]

Una pregunta trabaja con el vacío del motor

[@maniv100]

si y no. cierra cuando la presion es neutral o negativa y abre cuando la presion del turb es positiva a la presion que le pusiste al spring.

[@davidchivo007]

@@maniv100 pero esto qué es turbo de geometría variable accionada mediante la presión de carga del mismo turbo

[@eloymartinez9970]

Oh yeah boost!!

[@javierarreola6867]

For what engine is this , I have dd15 / 2010

[@Bailey-Brandt]

I'm no expert but this should probably apply to any turbo with a waste gate similar to this. I would research about adjustment specific to your engine or turbo

[@Sinister_Reaper]

if the wastegate is opened completely will i get any boost at all??

[@CarsWaifu]

no

[@MiniIsle]

Ok probably a dumb question but is that adjusting method going to apply for pretty much all wastegates? Thinking about getting into the turbo life and just trying to do some research. Found a car I want to buy that the owner says the current wastegate wont hold the proper Boost pressure and he thinks it needs a new one. Would be nice if I could do something like this to have a easy fix instead of buying/replacing it.

[@looncraz]

A wastegate that once built full pressure and now doesn't is either sitting behind a faulty BCV/TCV (Bypass/Turbo Control Valve) or has a leak in the wastegate diaphragm. The BCV/TCV failure is very common - some cars have them fail as often as every 40~50k miles.

[@jacobfriesen2609]

AgentSnuggles ,, just clamp the vac line problem solved

[@traxxastmaxx2.5r75]

So loosening then reduces boost?

[@michaelshields8750]

Yes

[@traxxastmaxx2.5r75]

Michael Shields thank you

[@tranxvillanueva1092]

@@traxxastmaxx2.5r75 yes just dont do it too much

[@JustinPaul1st]

For safety and reliability should this not be done on a dynometer as you are changing the dynamics of air and fuel ratios to an extent...

[@TheTomco11]

Not so important on a diesel, you want a boost gauge and egt gauge so you can keep an eye on everything though. As long as you keep your egt's safe you just give it as much diesel as it'll take without making smoke

[@chetantikone6837]

What happens in vechicle if waste gate gets jam and doesn't open ?

[@MCKobeBryant]

well turbine won't spin fast and won't be pushing air in so i guess less horsepower ?

[@sphinx501]

It will be overboost.. and your turbo will be cook if you put a lot of rpm

[@JulianJohanson]

What if I don’t have two jam nuts?

[@DieselPowerSource]

Simply remove the little c-clip pull off the linkage and spin it. To put it back on you'll need to pressurize the tube with appx. 30-40 psi (no more than that) and then put the pin back in the hole, replace the c-clip.

[@SOUPMATTHEWTHEHEAVe]

less....LESS BOOST! lol

[@thejuxas8506]

Why im watching this

[@patrykbic7893]

will opening the waste gate completely to allow 0 boost help with fuel economy?

[@DieselPowerSource]

No, that would hurt fuel economy.

[@guridhaliwal2624]

If u don't put back that pipe of diaphragm on the compressor side...then their will no boost because of leakage through the hole... instead of over boost

[@strider5119]

Are you talking about the hose? Because without it you get overboost and will probably cook your engine

[@agostinodipisa7302]

👌👋👍

[@martinlang9615]

I’m glad you guys are not DPF! Diesel Particle Filters, worst invention ever.

[@donovanbirch8847]

Theezzzeee nuutsss

[@taiwantaiwan6356]

6M61 turbo

[@hmongwild]

Leave the hose off for max boost.

[@most_unwanted_316i]

aka the Dominic Torreto Style lol

[@hmongwild]

Use to do it on my subaru wrx all the time. Stock was at 8 lbs with hose off i was hitting around 24lbs max. Soo much power soo much fun. Never blew my motor. Then i hear others say dont go over 10lbs or youll blow your motor. And i laugh. Stop being little sissies

[@jalilpandi1347]

@@hmongwild how u do it

[@hmongwild]

@@jalilpandi1347 theres a hose on the little actuator. Just pop the hose off itll give you max boost. Thats were you connect your boost controller to if you had one.

[@midnight347]

​@hmongwild how can you just add like triple the boost without even being tuned for it or anything? This story sounds very suspect lol

[@DieselPowerSource]

For more information about DPS products go to dieselpowersource.com

[@miguelgomes5879]

DieselPowerSource

[@nodanger2847]

Question! I'm fairly new to diesel turbo so, if I want to reduce the lag which way would it be turned *audi a3 tdi turbo *. Thanks in advance.

[@michaelshields8750]

This doesn't effect lag. It only adds or lessens boost

[@TheBmorris10]

Get a smaller turbo

[@danielthornton3277]

Chip it mate, more diesel will mean sooner boost, but will also mean more heat so keep an eye on that

[@crisz8664]

The answer to all your problems in second 38

[@lolrengarm8]

These nuts

[@Mind.Limbo357]

Dees nuts

[@zekeworst9193]

Ok… How much boost is too much boost?

[@chrisp7684]

depends on motor, turbo and tune. i have a boosted 1.6 miata. boost is set at 15psi and it’s been tuned several times by a well known local tuner.

[@zekeworst9193]

@@chrisp7684 5.9 Cummins, no tune

[@chrisp7684]

@@zekeworst9193 i’d definitely recommend a tune for safety lol. you could prob run 30psi with no issues if tuned properly.

[@zekeworst9193]

@@chrisp7684 tunes are expensive. And expensive is something I can’t afford right now. 😂

[@chrisp7684]

a new motor is even more expensive🤷🏽‍♂️isn’t urs stock turbo tho? in which case ur fine until u go standalone

[@crazyDIYguy]

Deeese nuts! I'm still fucking 12 lol

[@pastytit]

Dopey doesn't know what the 2 nuts are for. And haven't seen his mistake in the comments. There's no hope is there? Anyone? Anyone at all?

[@jerome403]

Whisky whisky whisky ? Husky? Banksy?

[@DieselPowerSource]

To learn how to change a turbo turbine oil seal go to: www.dieselpowersource.com/demonstrations or kzbin.info/www/bejne/govTpKeIj65qgrM

[@creeper111999222]

Deezz nutz

[@creeper111999222]

0:38

[@creeper111999222]

kzbin.info/www/bejne/aqeblp5viaqYhbc