ADT Command Panel - Introduction and Tutorial

[@createdbybenlinn]

This is the first video on the how to for ADT I have seen that explains anything on the messages!!! Thank you I was wondering if I was missing something, do I delete it or click on update , nope , ADT will send messages if there is anything urgent or relevant to update or change. I was so worried and now have peace of mind! Thanks!

[@samiraziz7840]

I Just Replaced My Old Modem/Router With a New One. Unfortunately, I Had to Reconfigure Each Camera Individually and Upload Them One-By-One. Fortunately, All My Z-Wave Devices Automatically Uploaded to the Touchscreen; However, My Chamberlain Garage Door Did Not. I Can See “Garage Door” on My iPhone ADT App But It Reads “Unable to Connect to the Accessory”. How Can I Correct This. Thank You!

[@BryteLink916]

You're have to go back into "My Q", then you'll have to reconfigure your garage. Hope that helps!

[@samiraziz7840]

@@BryteLink916 I Did Try That But It Did Not Work. I Called ADT. The Rep Said a Tech Would Have to Reconfigure the Garage Door Onto the App. The “Service Call” Would Amount to $150! Outrageous! I Plan to Only Use the Chamberlain Remote Control from Now On. Thank You!

[@Mercy_Pants]

Are glass break detectors armed in Stay Mode? Also what does Arm Stay Night do?

[@BryteLink916]

yse GB detectors is armed in stay mode. Night Stay can arm your exterior doors and windows to instant status. So if someone opens one of them, the alarm will sound without any delay.

[@antoinem5901]

IF ITS ARMED THEN ITS GONNA BE ARMED DUMB

[@Boss81ish]

Is there a way to get this to connect to my echo devices? My pulse connected with no problem but when I changed it to this system it no longer connects.

[@BryteLink916]

Im sorry, but it looks like is doesn not work with that configuration.

[@blackflower8241]

I just got 1 yesterday. I changed my wifi after the tech left. So today had to reset everything. Now the system will beep when you open a door but it no longer says front door open. How do i get it to say that again. Also how do i go in and out of the garage door. But keep the alarm on without having to disarm. I did it under arm stay but the alarm went off

[@BryteLink916]

1. Chime settings Go to toolbox, settings, adjust chimes. 2. Bypass the garage door when arming stay. IE- open the door and arm the system on your phone or bypass in the zones section of the keypad @4:45

[@russellkaufman4138]

Hi- is there a way to make the keypad completely silent? For example when you set it for arm stay and you put in your code, the pad beeps when you enter your code and when the alarm is armed. Is there a way to make this completely silent?

[@BryteLink916]

Unfortunately it cant be conpletely silent. The best you can do is go to the toolbox > settings > lower volume all the way down and turn off the chimes.

[@Hyedrate]

I don’t have settings where I can adjust volume

[@BryteLink916]

It would be under Tools > Settings > Volume

[@chrysoberieo7018]

Can I see photos or videos on the command panel.

[@dianemckusick1281]

When I click armed way, does the door have to be shut or can it be opened?

[@scottprywitch]

When coming back inside to disarm, is there a difference between "Disarm Now" and just "Disarm". I see you clicked Disarm

[@encountr85]

No difference

[@gthomas3666]

I have two panels the one in the bedroom screen only lights up when I touch it. How can I set the other one to do the same

[@donovancollins4752]

My alarm goes off when the door is fully opened rather than opening period. Seems like the alarm would only go off if the door is fully opened.. counterintuitive

[@cheezeball6109]

How to update busienss hours on panel?

[@BryteLink916]

I'm not sure what exactly you are asking about. Mind going into detail what issue you are having?

[@cheezeball6109]

@@BryteLink916 I just set up ADT with my business and the notifications tell me that I am opening and closing outside of my business hours or the parameters and I would just like to know how I can change those hours, as I don't see that feature in the ADT command app

[@BryteLink916]

@@cheezeball6109 if you log into your account on the web portal, you can adjust your business hours there.

[@cheezeball6109]

@@BryteLink916 thank you very much I appreciate your help

[@Funnyfun_life]

How i can check the entry that when the door open today ,, time

[@BryteLink916]

Event history would be in your ADT app.

[@aaronucsd]

What is Arm Custom vs Zones bypass?

[@BryteLink916]

Arming Custom allows you to bypass up to five of your system’s sensors. For instance, if you want to keep your back door open to let your dog have access to the backyard, you can bypass that sensor. For Zones Bypass 4:45

[@brihannawilliams6267]

Mines is on the wayyy im so happy but ima check it out to see if i like it…

[@jurgensduplessis1964]

I love touchscreen alarm systems all of them

[@RaymundoCalvilloLuna]

Hello. I click automation. But it is blank. I cannot add any device. I’m not sure why. Help?

[@BryteLink916]

Your service package from ADT needs to be upgraded to automation. Hope that helps.

[@RaymundoCalvilloLuna]

@@BryteLink916 thank you! If I upgrade to the autonomous plan. Will I be able to add as many devices I want if I buy them myself? Or would I always have to go through ADT to get them to install them?

[@abbiee.9931]

If somebody rings the door bell can you see it from the panel?

[@BryteLink916]

Unfortunately, you cannot. You can access your camera doorbell by the ADT control app on your mobile device.

[@brianduchowicz5321]

How do I view my nest camera from the wall control panel?

[@BryteLink916]

You cannot unfortuneatly. I suggest a Google hub or hub max.

[@65mflynn]

Hi, we just had new adt panel installed over old one…if we want to arm with dogs in house for motion and we leave..we need to arm away and bypass motion correct? We get high pitch continuous alarm upon exiting …what are we doing wrong, thx

[@BryteLink916]

Arm the alarm system in the stay mode (make sure night mode is not highlighted). You will then have 60 secs to exit the building. Stay mode will keep the motion off.

[@razenfi2580]

@bryte link can i change the sensors name via the command panel?

[@BryteLink916]

I'm afraid you cannot, unfortunately. Only on your ADT Plus app.

[@razenfi2580]

@@BryteLink916 do i need to subscribe to use the mobile app? appreciate your reply!

[@nikharris1839]

THANK YOU!!!!!!!!!!!!!!❤❤❤❤❤❤❤❤❤❤😊🎉

[@Raptor-7]

Nice pad , when i get a house ill need one !

[@AdamJohnson-dr5wx]

I am an ADT dealer, and If you haven't received one yet, I'm happy to offer you a FREE* 850 home security and automation system when you sign up for monthly monitoring. Let me know if I can be of assistance. Thanks!

[@WilliamAlbert-g1h]

I need to find my password that they will accept

[@BryteLink916]

Not so sure what your issue is. Could you clarify?

[@WilliamAlbert-g1h]

I need assentance

[@davzmail]

Horrible system. Worthless

[@BryteLink916]

I'm sorry you had an unfortunate time with the Command Panel. What about the panel were you dissatisfied with?