Silhouette Cameo 4 | Print, Cut, Scan, Press

In this video I show you in detail how to print scan cut and press using a silhouette cameo 4, a printer and a heat press. We are using JetPro Soft stretch paper. I also show you some problems you might come across and how to solve them along with how to set up this feature and it's limitations. Product links are below. Give this video a thumbs up if you learned something. Thanks in advance for watching and do not skip any ads.
Jet Opaque II Heat Transfer Paper amzn.to/2YrKqCz
Siser TTD High Tack Mask
www.heattransf...
Heat Transfer Warehouse Referral Program link
www.heattransf...
Shop A-Dubb Productions Channel Merchandise Store
❤️👉🏾allanawade.com/
For Contributions send to:
Paypal [e-mail]
Cash app $adubbproductions
Venmo @kingallanalexanderwade
For collaborations and business inquiries, please email me: [e-mail]
****************************************************************************************
Visit my AMAZON INFLUENCER PAGE where all the gear I talk about and use lives.
👉🏾www.amazon.com...
Home Depot affiliate link 👉🏾homedepot.sjv....
AMAZON LINKS
Shop on Amazon using my affiliate links Below:
Silhouette Cameo 4 amzn.to/38pwo6L
Digital Heat Press 15 x 15 amzn.to/2EqjiZK
Brother SE600 Sewing and Embroidery Machine amzn.to/2EYEya0
Brother PE800 amzn.to/2GaieKE
Spool savers amzn.to/3eO5Wrv
Embroidery scissors amzn.to/3cLqlLZ
Fray Check amzn.to/3bEh9sK
Simthread Brother 40 Color Thread amzn.to/2zuXHk0
Tear away Stabilizer 6x6 amzn.to/3eMfinE
4x4 embroidery Hoop amzn.to/2yGcRCw
PANASONIC GH5 amzn.to/2QzE8u7
Rode VideoMic Pro Plus amzn.to/2HaPsvc
Rode VideoMicro amzn.to/2SC358A
RODE VIDEO MIC PRO amzn.to/2hNMyfU
GoPro Hero 8 Black amzn.to/2REitDd
SONY-FDR X3000 amzn.to/2hNRZf3
JOBY GORILLA POD amzn.to/2Et83zq
FOTODIOX GREENSCREEN amzn.to/2roav7m
IKAN iLED6 amzn.to/2DiiZyp
Dji Mavic Mini amzn.to/2ttqNh8
Delkin TRIPLE Fat Gecko Three-Arm Suction Mount amzn.to/2GyKbLh
Fat Gecko Camera and Camcorder Mount amzn.to/2GANvWm
****************************************************************************************
DON'T FORGET TO SUBSCRIBE.
🔑Subscribe to my other youtube channel
Allan Wade 👉🏾 / @allanwade
🔑Like my Facebook Business page
👉🏾www.facebook.c...
🔑Follow me on instagram
👉🏾 / kingallanalexander
------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------
Also check out my business website
If you want tips and tricks and suggestions on how to make your next production better click the link below.
adubbproduction...
#printandcut #silhouettecameo4 #scanandcut

[@LouRao]

Each video taking the time to watch I’m amazed by your performance. You leave nothing out. No editing out mistakes or issues that do occur. Beginning to end a real life experiences. And always enjoyable to watch because of your personality👍.

[@djdomgutz]

I also use the offset feature on the initial outline and set it at either .05 or .10. That puts the cut line inside the image because many times once you cut the image it leaves some of the white vinyl around the image. It's an extra step but makes the image looks better.

[@akashakkiy]

thats true

[@michellepyatt7598]

Hold the shift down when you're rotating. That eliminate adjusting to get it straight. Love video and all the information.

[@buggett]

I didn't know you can use transfer sheets over Jet pro stretch. Makes things a lot easier. Good tutorial!

[@adubbproductions]

Thank you. Thanks for watching.

[@SirRonmit]

Great video showing mistakes and all !!! Especially for us newbies. I'm coming over from a full-sized 42" US Cutter, and you made everything perfectly clear and showed me why so many people complain about how their reg marks aren't working -- they need to watch your video!!! "USER ERROR" as we would say on our end. I did notice one thing -- when trying to lay your paper down on the sticky mat, take your protective film and lay it down only exposing roughly the top inch or so -- then you can roll your project up (or lift) and pull the protective page of and work your print onto the sticky mat -- that's how I have done it with my larger cutter, and (although I'm STILL waiting for my Cameo 4 to arrive -- tears) -- I plan on doing that after watching your video as well. Just a suggestion, but it may help especially with those larger 11x17 pages :) -- Tim N

[@liyah9983]

I watched your tutorial from beginning to end patiently. I'm generally very impatient when it comes to any tutorials longer than 5 mins but you was worth learning from. The one thing you said that stood out for me as someone who's looking to purchase sublimation paper for heat transfer printing was "it doesn't make sense to buy sublimation paper for light fabrics when sublimation paper for dark fabrics does both" I never thought of that!!! And I'm glad I watched yours before I purchase my first ever sublimation transfer paper. Thank you for the teaching!!! Love from New Zealand :)

[@pamelawise1203]

Thanks for taking the time to do this video. I had no idea about the printer settings being an issue for cutting too. Please do reverse side to bray your transfer and to peel. Pull the backing from the design instead of pulling Front side up. Makes a huge difference to transfer

[@norma9548]

Very Impressive. Love the design and the fact there were minor missteps a long the way. Just shows that is real right there. TFS

[@toyzindahood4157]

Nice thanks homie for showing me something new plus love how you fight threw your problems...I rock with you

[@adubbproductions]

Thanks Alex. This one gave me problems all day. I know other people had difficulty with it so I was determined to figure it out and just when I got it. Lol you see what happened. Lol it we solved that issue too. 👍🏾 thanks for watching.

[@boldalx5351]

I appreciate you taking the time to give clear directions on the Cameo 4.I almost gave up on the print n cut...Subbed.

[@Cardo2funny2.0]

A DUBB JUST WITHIN A COUPLE DAYS YOU SHOWED ME ALOT STAY ON UR PURPOSE

[@adubbproductions]

That’s dope. Thank you for watching. I appreciate it. 🙏🏾. Glad to help you grow your business.

[@mr_good_vibez__only9455]

Bro don’t feel bad bout the mistake these are the best vids we can’t always get it perfect at the moment but we will learn good vids tho bro learned a lot from you

[@maxgelista3914]

Humble character its what keeps bringing me back to Learn keep it Up

[@adubbproductions]

🙏🏾

[@messygangtoxiclife6373]

Best Print/ Cut Video I've Seen So Far Most Definitely💯 I Haven't Started To Print Im Learning And This Video Is Very Helpful Great Work And Thanks

[@valentinomwilliams]

I like his expression: If that does not work its the Devil. Lol

[@bonniekaliko8695]

I LOL

[@thepredicate7089]

Brother 🤦🏾‍♂️ I believe you just helped me solve a 4 month mystery 👉🏿The registration marks was giving me a headache 😤 but I’m a try like you did and hopefully I’ll be good Thanks ✊🏾

[@adubbproductions]

Yea bro. I didn’t show it but if you keep getting that error. Try to hit manual and position that black box in the dead center of the black registration mark box then click register. That should work. If not then. Agh. Yea. That should work. Lmao. This thing is giving the world hell. I got it though. You will get it too.

[@thepredicate7089]

A-Dubb Productions Allan Wade Thanks brother ✌🏿

[@sinarella]

Great video! I have never used the simplify button. Now I will be using it!

[@adubbproductions]

Yes sometimes the trance tool creates a lot of small dots. You can just hit the button a few times and it takes a lot of those dots away making for a smoother cut. Then you can go in and physically remove the extras you don’t want and need to make it even smoother.

[@sinarella]

@@adubbproductions thank you so much! God bless!

[@dianacoy1429]

Thank you so much. I really enjoy all your videos and I have learned a lot. I just hope I get as good as you are, i will keep watching.

[@deboraleyba1921]

Excellent teaching-even through the hic-ups!

[@adubbproductions]

No problem. Thank you for watching

[@gisellealleyne8477]

Am now confident i can use my machines now thank you sooo much

[@jeovanylopez9260]

Getting my Cameo 4 soon!!! So excited just been looking up videos thank you bro!!!!😁😁😁😎

[@adubbproductions]

Anytime. Congrats on your new Cameo.

[@jabroadnax]

If you turn off your cutting mat, you can make your registration marks a custom size. I use my 11x17 paper with registration marks all the time. Thanks for the tutorial.

[@juvenalmendoza8164]

Can you explain how? Mine won’t let me make registration points of the mat is off

[@adubbproductions]

Wow. @jay b I’m gonna try that.

[@2gunz633]

Blessings to you I'm having problems simplifying the image after I trace it what could I be doing wrong?

[@raw900rr]

This is way easier than you're making it out to be. If you go in and import the Philly background into studio, expand to fill the n page. Add your lettering. Then trim intersection. Make sure you turn on registration marks, and print scan cut.

[@dslafacionttdonnacooper1482]

I am so amaze with how much this cameo 4 does . I am going to try this. Thanks.

[@mamanita131]

You are the most!!! Very enlightening and detailed tutorial.

[@adubbproductions]

Thank you for watching. I appreciate it.

[@melodywilliams6197]

Thank you for helping me understand Cut and Print.

[@MY-ul9jm]

This is the information I badly needed! Thanks dude

[@adubbproductions]

🙏🏾. My pleasure. Glad I could help. Thanks for watching. Appreciate you.

[@derekfegen5864]

Explanations are second to none great vids really enjoy them thanks x

[@dfsgirl0730]

Great video. Try my first cutout using your video and it worked perfect. Thank you

[@adubbproductions]

Awesome. Thanks so much for watching. Don’t forget to subscribe.

[@shastylesdesign]

Looks good and I love that heat press!

[@adubbproductions]

Thank you I like it too, just wish I would have got the auto open. There are a few down sides to it. I’ll make a video on it. Think I’ll be upgrading once again. Smh.

[@shastylesdesign]

@@adubbproductions Ill buy that one from you when you do upgrade ! lol

[@adubbproductions]

I’ll be sure to let you know when and if I sell it.

[@TheBigjay757]

@@adubbproductions WHICH MODEL IS THAT PRESS? WHICH PRESS IS AUTO OPEN?

[@AM-ob5ki]

love it buddy thanks alot!!!! this is all new to me.... excited to get into all sorts of technical problems!!! ahaha

[@adubbproductions]

No problem. Problems will come up but when you figure it out your golden. good luck.

[@osvaldofeliciano5647]

Wow great information. You spoke a little way too much and you could of skip the details but honestly I watched it all thank you.

[@adubbproductions]

Yea. I tent to talk to much in my videos. I say I’m gonna talk less before I hit record but then when I’m editing I realize I did it again. Sorry but thanks for watching man I appreciate it. Thank you.

[@randy1896]

Nice. Only thing ,there’s a pop up panel missing Called printing preferences when you print? Which settings are you using ? . Automatic ,custom? Then in color corrections,which are you using. Hey I’m learning so much from you ,please keep it coming ! FYI :I’m with you bro RACISM SUCKS !

[@valariecenteno1012]

Awesome video! Learned alot about opaque paper. Thank you.

[@georgedjmatrix4229]

it' is Reading!!! ... The Blade has nothing to do with the Reader , Reg reader is on Right Side of the blade. i had to figure that one also. glad you figured it out. Good Job

[@adubbproductions]

Yup. Thanks for watching. 🙏🏾

[@debbeejeter992]

Awesome!! Thank you!!. I grew up in Philly!!

[@phillyhardaway3334]

Shoutout to home lands Philadelphia 💪🏿

[@Asidelove]

I love your video. Side note. it reads the marks from underneath. little square buy the left line

[@adubbproductions]

Thank you for watching. Ok. Got it

[@Asidelove]

@@adubbproductions actually I watched mine again. I think it is the area between the tool carriers.

[@eddienails9284]

New in the game looking to learn thanks

[@evettemurch4760]

Thanks for keeping it real. Dope shirt!

[@badmatchup1723]

Good work! I have a dumb question, lol. Why is that some people use a printer and some don’t while using the cameo 4? Is it a preference? Or it depends on what project you’re doing? Thanks!

[@adubbproductions]

Not a dumb question. It’s a different method. As you can see i printed a design onto the paper. The Philadelphia city sky line. Using this method you can print anything you want onto the paper then the cameo cuts it out via the registration marks and the outline the machine reads. The other way is just cutting vinyl or If you had a pre printed on paper where the entire sheet had the image on it you could just cut on that as well. There are different ways to do things and there are different materials you can use to make different types of merchandise. That was a good question.

[@mainaknandy6636]

@@adubbproductions Was it a sublimation paper and sublimation printer?

[@bmlt1678]

Great video man. Can you please tell me what adhesive you are using for the transfer?

[@adubbproductions]

Hey, no problem. Thanks for watching. I'm using this transfer mask. heattransfer.ositracker.com/159730/11767/url_15212

[@TheOnyeche]

Nice tutorial, thank you. How do u know how many seconds its supposed to take on the pressed machine .

[@violetvowel]

Excellent video!!! 👏👏I have a question, how can you get the transparent film at Amazon...? Just like that? Transparent film? Or it has a special name?😅 Thanks!

[@DanyelNicole]

I was looking for the same thing! Thanks for asking the question.

[@keyboo2012]

I followed your instructions to the T but my cameo 4 wont read the guidelines correctly... I have the white cameo 4! thanks for your tutorial videos, I will keep at it til I get it!

[@sonyadurden7980]

looks each you did a great job

[@josiereyna864]

I have had my cameo and Cricut and I am so intimidated by them. Mainly the cameo and I would love to learn it! This video was made a year ago are you now doing any teaching classes?

[@TDollaz16]

One question for you what site exactly did you get the siser easyweed transparent film especially that size? Because I got an siser easyweed adhesive film/vinyl and is there difference? keep up the great work!

[@bevpope3041]

To make it ready the registration marks it’s to do with the light. Half open the cover to to make it darker when it first reads

[@jratdz]

First of all great video. Second, the heat press link doesn’t look like the one you are using. Do you have a link to that one?

[@jbswift1189]

Lived the video. How does the print hold up after washing and do you put it in the dryer or line dry?

[@johnwall8841]

if you do settings via your PC and then do settings in your printer, one over rides the other ! I had the same problms years ago with this type of printer.

[@rickybritish]

Bro looking great,how do you get to adjust the the picture in the back ground ie the advance pattern settings on cameo4 ?

[@SoulfulXprssion]

Thank you for sharing your knowledge

[@adubbproductions]

Your welcome. Thanks for watching.

[@SoulfulXprssion]

A-Dubb Productions Allan Wade so why a cameo 4 vs a cricut maker or a silhouette. I am going to purchase an updated machine and just like to hear why people chose the machine they chose.

[@adubbproductions]

Lisa Gordon So Silhouette and cameo 4 are the same thing. Silhouette cameo 4. We just say cameo 4 for short. My main reason I got the cameo was because the software to create the designs does not live on the companies website. You can use it when you are offline. Just download it in your computer and you got it. The cricut to me seems more like a hobby machine and not a machine you would find in a business and ofcorse the software to make your designs is on the companies website. You don’t have internet access and your screwed.

[@SoulfulXprssion]

A-Dubb Productions Allan Wade ... that makes sense ... So do you a monthly fee for the cameo site like you do for cricut design space - or are you saying I can DL to the cameo from the web .. but once I do I can keep it stored in my PC/Laptop? I have a cricut and I just don’t want to pay that monthly fee. I have the scan n cut and don’t use it and I know that is my lack of knowledge. But I am learning simply for mass die cutting stamped images. I want a silhouette because my daughter is making shirts, masks and so much now. I was glad to see you say there is a new heat press coming out because she asked me to buy her one. And I love she doing things to create some income from stuff she enjoys. Which I do not mind investing in.

[@georgeyjung350]

what paper are you using please mate? good vid lad u explain everything spot on mate

[@patricehollywood6014]

Thank you. I appreciate you. 🤩

[@FreedomBiafra]

Good video! I got some b flex heat transfer vinyl and a cameo 4. Whats the best settings for this tape to cut?

[@terrymatthews3132]

OK, so I watched your Print and Cut and I think you are using the Neenah Jet Opaque II but which is great but I have been looking for something like the Siser EasyWeed Adhesive to help me place three Spot Color screen printed transfers on the back of a customers shirts. I need to use something like this so I can get the alignment right. The The transfers are on a paper backing or carrier. Do you think the Siser EasyWeed Adhesive would work?

[@ProudFather15]

I recently brought a Canon TR7520, watching this video has me wondering if my printer can do the same. If so i will purchase a heat press machine, do you have anyy suggestions?

[@danabinkley7337]

I'm new to your channel. Did you ever give instructions on how to "cut" your letters from a photo? I have an Affinity program, which is similar to Photoshop. I've been tried to figure out how to cut my letters out of a photo to apply to a shirt like you did. Any suggestions? Thanks. I recently got a Cameo 4. Your videos are very helpful.

[@pcdm43145]

So, I don't have Affinity (I use Photoshop/Illustrator, myself), but I would imagine it's the same principle: Basically, you want to turn your letters into a "clipping mask", to hide the image-pixels around the letters. 1) Make sure your image is on one layer, and your text-layer is ABOVE the image layer. *(Depending on the circumstances, you might have to convert the letters from text to shapes. But I'm sure Affinity has that ability, too.)* 2) Select both the image & text, find the "Clipping Mask" button in Afinity's menu, and make the mask. That should be all you need to do, to get the effect. All the best, my friend.

[@neversurrendernevergive-up7988]

Thank goodness you fined tuned the trace points. Love the design, did you take that picture also? 💯🙏

[@adubbproductions]

Thank you. It was coming out a mess before I fine tuned it cameo was making all types of little tiny cuts that I couldn’t see. Yes I did take that picture That was taken with my drone I’m gonna take more soon. Have an idea. Lol

[@chrisbarnes9628]

What ink is in the Epson printer? Thank you!! Great videos!

[@michaelchong3830]

Great video. What’s the max size you can print and cut?

[@alexishogan6342]

Is a epson 7210 as good as the 7710 ? Both can be used for pigment ink and sublimation.

[@donlithio9697]

Can you please tell me how to print the letter as big as you doing in this video I have a Canon TR8600 my letter are extremely small and is it a must to purchase the Silhouette cameo 4

[@jdkman79]

I use this same paper and printer, I get more vibrant prints using “premium matte” paper type. Try that out.

[@johnnypopovich905]

Does it bleed when u wash it with that setting. Premium matte paper gets a ton of ink compared to norm paper setting

[@jdkman79]

@@johnnypopovich905 you do need to let it dry for a few moments before messing with it, but it looks so much better.

[@Kyle5K]

I feel like the colors are washed out, I even bought the Neena Jetpro as well, just never looks vibrant.

[@Asidelove]

How much ink gets pulled when removing the transfer plastic

[@caroldonald5194]

Are you using regular ink ink vs sublimation ink?

[@sajadkhan9046]

Hi mate, does this become permanent on the t-shirt? and if you was to wash it in the washing machine would it come off or not?

[@BDCTEES718]

Oh one more thing I have my Cameo 4 setup on on a shelf in my office that I set up to keep my quipment on, do you think that's a good spot? because does The Cutting Board need room 2 go through the machine I'm not exactly sure how it works

[@adubbproductions]

BLACKDON'TCRACK TEES Your cameo should definitely be sitting somewhere where the back of it has space for the vinyl or cutting mat to pass threw. You also can’t take advantage of the cutting feature if you can’t access the back.

[@beyo91202]

Awesome work, is there a link for the transparent paper?

[@helencolbert2100]

Nice job!!

[@adubbproductions]

Thank you. Thanks for watching. 🙏🏾

[@barracade24]

Can seem to find that siser transparent masking you used!

[@JosephHelmstetter]

What type of ink do you use in your Bother printer? Is it standard ink jet ink?

[@ginake13]

Hey bro, thx for the video, what ink are you using on your Epson ?

[@Ankhesenamun23]

Hey, I’m new to your channel and thank you for this tutorial, question do I need to purchase a printer , I’ve seen other videos and a printer wasn’t used , it went straight from the Silhouette to the heat press, was that wrong or am I able to do the same ?

[@eagleeyeprintingdesigning5443]

The reason for the printer is to put the art work into your wording. You can go straight from cutter to press just means you will have plain colour vinyl pressed to your garment, that is where the different types of vinyl come inter play like glitter, camo, neon, chameleon etc. hope that helped your question.

[@Ankhesenamun23]

@@eagleeyeprintingdesigning5443 Yes it did and thank you so much.

[@keshaygraddy7579]

Hey just bought my first cameo. Will i need a special kind of printer?

[@adubbproductions]

To do a design like this no. Just a regular ink jet printer

[@butta375]

Tight work!💯

[@BDCTEES718]

Peace brother A Dubb I'm knew in the t-shirt printing business , but I do love your channel and how you explain step-by-step to process you are going through so I've been subscribed to you for a few months now oh, I brought my first Silhouette back in July after watching several of your tutorials along with other tutorials and several attempts to cut out designs I created so that I could apply them to a t-shirt I had no luck and kept getting this registration failed , so I started thinking my machine was broken and set it back to Amazon and just recently purchased another Camry 04. But once again to no avail I'm having the exact same problem can you do a video where you focus on just setting up your registration marks because this is driving me insane and I have so many people who want to want me to design some shirts for them but I can't because I can't even cut PLEASE HELP😫😭😩

[@dennissmallin8742]

Looks great. How did you design the Boss with the background

[@adubbproductions]

I created it in photoshop.

[@dennissmallin8742]

Do use sublimation or inkjet in your 7720. Also will inkjet transfer to mugs

[@AntoniaRoberts-Johnson]

This is no joke!

[@adubbproductions]

Yea. It’s a little involved.

[@cherylwilkins5457]

Nice to see, Thank You!

[@tonishacooks7299]

Missed you

[@adubbproductions]

I didn’t go anywhere. I’m right here. Always will be. Promise. Thank you Tonisha. Thanks for watching and I’ll talk to you again soon.

[@jovenejones8497]

You don’t need a Teflon sheet? The heat won’t melt the transfer tape?

[@asr-kuhaylahmccleary6628]

What type of ink are your using, sublimation or pigmented?

[@somethingspecial76]

Oh by the way. Thanks for the videos..

[@boominbo]

Im new to the t shirt word hopping in with no experience at all, i have the cameo 4 and a heat press, i was told thats all i need. i see you have a printer do i need a printer as well or can i send my prints straight from the software to the cameo? please help!!!

[@Urbanmediashowcase]

How well does it wash? Fades? Peals? Bleeds?

[@Urmyseoulmate]

What epson printer do yo recommend for sublimation? And do you have a video of how to install the inks😭

[@eagleeyeprintingdesigning5443]

basically any of the epson tank printers can do sublimation. There are many videos on youtube how to fill the ink tanks. Hope this helps

[@raw900rr]

Turn on your bleed setting to keep from leaving the white ring around the letters

[@victorvelez5805]

How % on the bleed?

[@raw900rr]

@@victorvelez5805 you can adjust that to whatever you need. Id suggest testing it on a regular sheet of paper first (so you don't waste expensive material) and adjust as necessary.

[@victorvelez5805]

raw900rr gotcha thank you. I’ve been struggling plenty.

[@raw900rr]

@@victorvelez5805 feel free to pm me if you have questions. I do a lot of work in studio.

[@victorvelez5805]

raw900rr for sure. I started Messing with the calibration. I came close to it, but still thin white line

[@Ross510]

💯🙏 highly appreciate the in depth tutorials #snsgang

[@purplecity817g.s.w7]

Just got my cameo 4 wish I could pick yo brain cuz I’m just starting

[@ZymixProductions]

Hey Bro, I have the Silhouette Portrait 3. What HTV do you recommend?

[@adubbproductions]

I recommend getting vinyl from here heattransfer.ositracker.com/159730/11767/url_14909

[@ZymixProductions]

@@adubbproductions Thank you Sir! You da Man! 👊😎👍🔥

[@kyloviolet7131]

Thanks so much!! Can you do this process on a 100% cotton shirt?

[@eagleeyeprintingdesigning5443]

yes

[@Rajpina1017]

Excellent

[@adubbproductions]

Thank you. Thanks for watching i appreciate it.

[@petalsofpreece9930]

What is the clear sheet you used? I want to purchase. I'm tired of self aligning

[@adubbproductions]

Petals of Preece I’ll get you a product link. One moment please.

[@adubbproductions]

sorry for the huge delay. This is a link to the clear sheet I used. heattransfer.ositracker.com/159730/11767/url_15212

[@petalsofpreece9930]

@@adubbproductions thank you

[@anthonymcglocton8458]

I am new to the print world. You do not have to use any DTF POWDER?

[@adubbproductions]

I made this video a few years prior to dtf being a big thing. I’m sure it was around but it wasn’t as popular and as availed as it is now. This is exactly what you saw in the video. No Powder or anything. I just printed out of my printer onto the appropriate paper and pressed it on.

[@michaelbuchanan2662]

Good stuff

[@tinak5027]

Hi, great video, thanks. ?? What kind of ink do you have in the printer??

[@adubbproductions]

Regular ink printer that came with the printer.

[@tinak5027]

Inkjet? Can one use laser printer? I’m an embroidered looking to expand.

[@adubbproductions]

You definitely need an ink jet printer for this. I don’t think you can print on that paper using laser. You’d need to check the specifications of the paper. Ink jet is better for more detailed images anyhow.

[@cassandravelez6142]

Thanks for the content. Was wondering if you have ever played around with "Puff Vinyl". Guess it gives it a raised texture effect. I been wanting to do this right here and will give it a go. I have your same set up with a 20 x 16 press. This technique just might be as close as you get to DTG. That's the goal but as you know the Epson DTG printer cost big big money. I subbed and liked thanks. Will be using your link for the Siser HTV. Its my go to Vinyl.

[@adubbproductions]

Thanks for watching and subscribing. Yes i have several videos in puff vinyl and another one that is worth looking into called brick vinyl. Here are the links. kzbin.info/www/bejne/fJC5gmSwepqCkNU

[@adubbproductions]

kzbin.info/www/bejne/f16tnnycq8eqlbc

[@adubbproductions]

kzbin.info/www/bejne/e57Hampta9Odf8U

[@adubbproductions]

kzbin.info/www/bejne/a6mxm6OPn8hsb6c

[@felipesandoval4440]

It cuts big i like that since cricut limits you to 6.75x9.25