Advance Paris X-i1100 | My thoughts on this 2 channel amp

Advance Pairs X-i1100 - going back to basics and giving great sound.
Go have a listen and see for yourself. Check if your HiFi retailer is stocking this brand.
Nice sounding unit - slightly warm sounding unit
Nice details
Good openness
Really well built!
Love the retro look and connection space on the back
Purely stereo amp, that focuses on sound quality
Aus Price approx $5999
EUR Price approx $3500
Inputs:
4 x optical
1 x usb b connection
2 x digi coax
1 x CD Balanced aka XLR CD
1 x Phono input (analog)
1 x CD (analog)
1 x Turner (analog)
2 x Aux (analog)
Further information:
Output power 8Ω
2 x 200W RMS
Output power 4Ω
2 x 400W RMS
Frequency response
10Hz - 70kHz
Tone control
+/- 10 dB
Distortion
0,025%
Signal to noise ratio
102 dB
Channel separation
75 dB
Output impedance
47KΩ Unbal. / ball. 47KΩ
IN LEVEL (CD/AUX)
500mV
Phono MM/MC input level
7mV
consumption max.
700W
Transformer
1 (700VA)
Width
430 mm
Height
210 mm
Depth
476 mm
Net weight
21,4 kg.
VU-Meter
Yes
DAC
PCM1796
Advance Paris, French manufacturer of high fidelity presents the latest addition to its CLASSIC range designed for the demanding music lover. This new integrated amplifier has many technical advantages. We thus confirm our desire to leave nothing to chance and to optimize each of the modules that make up this integrated amplifier.
We get a device with many possibilities, operated intuitively, thanks to unit's ergonomics, and above all a flawless and blameless musicality, all offered at a very competitive price, given the enormous potential of the X -i1100.The X-i1100 has no less than six inputs, including a moving magnet phono, an unbalanced and balanced CD, a tuner, two auxiliaries and an “Amp ln” direct input.
The digital inputs are just as numerous: one USB, one AES, and six S/PDIF including four optical. The outputs are not to be outdone: one dedicated to unbalanced line recording and a preamplifier output, in order to connect an additional power unit to the X-i1100. The X-i1100 can power virtually any type of powered speaker with its 220W effective per channel under 8Ω (400W under 4Ω€!) based on a toroidal transformer of 700VA and 60000uF of filtering capacity.
The preamplification stage is a significant focus with switching relays as close to the inputs as possible. The DAC has two digital signal receivers: an X-Mos processor and a jitter-corrected USB3318 for the USB input and a Cirrus Logic CS8416 for all others, AES and S/PDIF. The chosen converter, a Burr Brown PCM1796, manages signals up to 192 kHz at 24 bits. Metal film resistors and polypropylene capacitors contribute to the quality of reproduction of this integrated amplifier. Mounted on large heat sinks, the amplifier boards, connected to the output terminals by means of 4 mm2 section cables, have a triple push-pull per channel, therefore three pairs of NJW0281 G and NJW0302G bipolar transistors.
The mechanical construction has also been meticulous: five compartments forming as many galvanic insulations and contributing to the rigidity of the X-i1100 are integrated into the chassis with optimum ventilation of the X-i1100
www.advancepar...

[@mikedelara8226]

Stunning and well thought out! Wow

[@vvsousa]

Beautiful

[@charleshall3973]

Boy what a cheap, gaudy looking thing. It’s like they tried to rip off the Yamaha or Technics look and failed miserably.

[@martyhill8342]

Whoo! Cheap and gaudy...like a Mac!