This is a great video. I noticed that you turned offf Audyssey multi xt32 , that you only changed the level of your subs to 0, and you didn’t the levels of Fronts. Why didn’t you change the level of your fronts to 0 as well?
@HomeTheaterGamer3 жыл бұрын
I totally realized just now that I didn't mention to level match your speakers before doing this. That's why I didn't change them: I had already level matched all main speakers to 75dB, so the other speakers are good to go and act as the baseline level. Thanks for pointing this out.
@dadevastator24_773 жыл бұрын
@@HomeTheaterGamer shouldn’t your mains have been a 0db, so that you can run REW to match your main at 75db
@HomeTheaterGamer3 жыл бұрын
The way I typically do it is to set my overall volume on my receiver to 0dB, then play pink noise in REW and adjust the individual trim levels of each channel to reach 75dB. This way I know that 0dB is reference level. I’ll actually be doing a video tutorial next week on this.
@reviewgodusa96133 жыл бұрын
@@HomeTheaterGamer does it have to be 0db? I set my reference at 13db and didn't think much about it at the time. Now I realize my master volume was at 13db at the time
@alexallegria943 жыл бұрын
i had a problematic subwoofer cant do much with audyssey ended up going for dirac live,, found it better on my room,, thank you for your videos bro
@ericmarriott52743 жыл бұрын
I CANT WAIT TILL MY ANTHEM MRX740 COMES IN SO I CAN EQ MY SVS pb2000 PRO WITH MY NEW PARADIGM SPEAKERS. THANKS FOR SHAREING THIS WILL HELP ALOT
@HiFinest3433 жыл бұрын
Dude... you’re the best and I can’t wait to run through this!! Thanks so much for taking the time to make this video...
@HomeTheaterGamer3 жыл бұрын
Thanks. Let me know how it turns out for you.
@danmaier20773 жыл бұрын
Great, great video again !!!! Greetings from Austria 🇦🇹 Europe.
@danmaier20773 жыл бұрын
And I solved my problem with the -63db volume (listening at night), it works great! Subwoofer turns on !!!!!
@Zumangy3 жыл бұрын
One of the best video about EQ I've come across. And I've seen a lot of them! You got the right balance of right to the point while still telling us why you do the things you do. Keep up the good work. I'm officially subbed to your channel 👍
@pooter4e5523 жыл бұрын
Dude! Awesome video. 👍😀
@camaxide3 жыл бұрын
Excellent video - good quality on everything. Will get the Audyssey app as soon as I get to upgrade my old Denon reciever :D - finaly I'll get them calibrated right
@americolouro44943 жыл бұрын
Não Há nada melhor do que SVS viva a SVS
@jameswheeler76792 жыл бұрын
Thanks for the review will be purchasing the 1000 SVS im a few more weeks pro.
@cjcaldie3 жыл бұрын
How'd you start off with a to flat curve in audessy though. Mine had a slope that it always wants to hold on to
@bommareddybrijendrareddy93013 жыл бұрын
Is default-10 on the svs app mean 50% subwoofer volume level?
@garretts431 Жыл бұрын
Surprised he never replied as im curious about this as well….
@fedurrrass42263 ай бұрын
I whant to know too
@TheDabbinDave3 жыл бұрын
I am in the process of obtaining a laptop from a buddy of mine, YAY! Getting a proper mic will be another issue. Question. When using two different model/brand of sub, does Audyssey EQ the lesser of the two? From what I’ve been told, this is the case. So, if you have a really good sub and a so-so sub, just use Subwoofer 1 as LFE and connect the other(s) using the speaker terminals from the L/R speakers. “Reference” kills the highs, always use “Flat”. The Audyssey app is still not compatible with my x7200wa.
@arielalaniz60573 жыл бұрын
Just subscribed. What are your thoughts on the dsp lf by Dayton? I used the iwoofer pro app for a auto calibration. I don’t have rew or a mic for measurements.
@bmwberto80553 жыл бұрын
Dude your killing it, in glad you turned off mid-range compensation as that represents the crossover point in most speakers in which case speaker companies already compensate for that in their internal crossovers. Leaving that on essentially is like compensating twice. Again phenomenal job🤘👍👍🔥🔥🔥
@jimmythedrummerbrooks61723 жыл бұрын
Hey Brad, I have a question that has not been answered on the internet yet. I have been running my PS4 audio for years now through Yamaha hs8 studio monitors. It always sounds terrible compared to my computer where I can run external sound card like focusrite or M-Audio through USB and the computer will detect it. Is there a proper way to run PS5 audio through studio monitors like you can on a gaming PC? Thank you for any help you can give on this topic.
@jonathanyoung70503 жыл бұрын
On SVS app what gain are you at before starting level matching?
@flomofo1 Жыл бұрын
Good video series. Looking for something that applies to the new Sony AVR I bought that does spatial audio etc but does nothing with the subwoofer outs it has...
@nohandleavails3 жыл бұрын
Awesome video and super timely - this is exactly what I was after! Q: At 17:57 Audyssey set your sub trims at -12db..doesn't that mean your sub levels were too high for it to calibrate properly (since -12 is the lowest trim it can detect)?
@HomeTheaterGamer3 жыл бұрын
I actually mistakenly edited out a part where I talk about that. If we weren’t applying a house curve, then yes, you’d be correct. -12dB would mean the subs are way too loud for Audyssey to set the SPL correctly, and you would end up having to run Audyssey again after bringing their level down. However, because of the house curve, we need that extra output to apply the house curve without boosting anything. We’re essentially tricking Audyssey. You’ll notice that after applying the house curve and bringing the sub trim level to -3dB, everything is where it should be.
@nohandleavails3 жыл бұрын
@@HomeTheaterGamer Thanks for the explanation - that makes total sense. I've blocked out the rest of my day to follow this tutorial - can't wait to hear the end result!
@robertschuster3123 жыл бұрын
This is a great video, but if you have older SVS subs like i do they don't have the cool app, so for me it makes more sense to use a miniDSP 2x4 HD. But this is a great way to save $200 for the average person that has the newer pro series with the cool app.
@bojangles_bonjangles8000 Жыл бұрын
If you were to get (2) SVS SB-1000 Pro’s center wall between Prime towers or (1) SB-3000 that would be corner loaded, what would it be? Great videos!
@michaelviers64618 ай бұрын
Can I apply that house curve in the Denon app without doing REW?
@beansy99 Жыл бұрын
Can I use my Audyssey mic for this?
@viper04af Жыл бұрын
So do you workflow for all this? Watching your videos but not sure the proper procedure to follow
@HomeTheaterGamer Жыл бұрын
As a general rule, get all the subwoofer stuff done FIRST before doing anything else with your speakers. My preferred workflow is making sure each sub is level matched first, then check and see if they are in phase and working well together, then focus on EQing them (if you have the option), then determine best crossover points with speakers. There are a few different ways to go about things in each step, so pick which one you think works best and makes the most sense to you is my recommendation.
@JohnJohn-pr1sh11 ай бұрын
I noticed on this video you left the dBFS at -12 but in your level matching videos you said to have it at -30. Which one is it? .-.
@dharma67uk3 жыл бұрын
Cool
@brodelicious3 жыл бұрын
I got the MiniDSP for my birthday last week and your series on the setup was indispensable! I have a curve I’m happy with, but I am totally disappointed with the overall bass output reduction. Is running the bass several dBs hot an option or will that destroy the curve I worked so hard on? If increasing the level is an option is it better to do it through the receiver or the minidsp? Thanks so much for being so commutes to the video/editing quality and the detailed instructions. I’ve shared the channel with all my friends interested in Home Theater.
@JuanJose-wt5yj2 жыл бұрын
How does the equalization applied to the subwoofers affect the Group Delay? It would be nice to be able to see the Group Delay without vs equalization. Written with translator Greetings
@28_babyshark2 жыл бұрын
Svs PB-2000 pro, so -14 is more bass then -8 ?? Also what is low filter? Keep it on or off ? I have the sub on auto. I want more bass for movies. We just did a auto tune with the Yamaha RX-6VA receiver. It sounds like the sub isn't even at 1/2 it's capability. What Hz should the sub be at 80hz ??
@MrJonJuggler3 жыл бұрын
Great video. Just to check, you should always set the PEQ before running audyssey so it has less to do? And I presume when doing this I should have audyssey turned off on my avr?
@HomeTheaterGamer3 жыл бұрын
You are 100% correct on both! And also make sure to set your crossover to the highest point in the receiver when adjusting the PEQ and house curve. That way you’re seeing the subwoofer when doing REW measurements.
@MrJonJuggler3 жыл бұрын
Thanks for the reply. I have an sb-1000 pro coming tomorrow. Looking forward to having a play.
@scottnagle65312 жыл бұрын
Why does SVS recommend you use PEQ after Audyssey is run?
@johnlim77203 жыл бұрын
You could try using the Ratbuddyssey...it helps you set the house curve using your PC more accurately. Kinda hard setting the house curve using your fingers...specially if they're fat! :-)
@HomeTheaterGamer3 жыл бұрын
Looks like I totally spaced and forgot that you can’t reference the same video using a card more than once (the little link that pops up in the upper right corner). Here’s the video where I go over level matching subs and using distance to time align your subs and mains together: kzbin.info/www/bejne/rHm9hHVtppZ6f7M.
@dharma67uk3 жыл бұрын
Boring
@HomeTheaterGamer3 жыл бұрын
@@dharma67uk would you like me to get the door for you on your way out?
@TrueLies23 Жыл бұрын
I have a dumb question. And maybe you wont remember after this much time.... were the sub delays/distances set to 0?
@scottnagle6531Ай бұрын
I am wondering same thing. Was trying to dial in my dual SVS 2000 PROs last night but when playing together got huge nulls. Then I realized that I never ran Audyssey with my 2nd SVS sub so distancy was 0. Assuming that is the issue and I need to go back and run Audyssey FIRST before doing any of this to ensure my distance are corrrect. But would like confirmation
@pooter4e5523 жыл бұрын
Question! Would subwoofer measurement with a single sub even be worth it? This question is for people with a single sub who is scared to ask.
@robertschuster3123 жыл бұрын
yes, just to ensure that your sub is not in a null, more effective than doing the sub crawl
@jaseking6560 Жыл бұрын
thanks for the free MASSIVE frustration headache , half of this stuff is not relevant in 2023
@HomeTheaterGamer Жыл бұрын
The Audyssey MultEQ editor app and SVS app are both very much alive and still relevant in 2023, as are the methods explained in this video. Care to explain what you mean when you say it isn’t relevant in 2023, because I wholeheartedly disagree?