Just hard clipping 😂

Is it possible to use both old and new versions on same computer

Subs reference for hc is 85db not 75db.75 is for all other

Side load Kodi?

Can I 'SIDE LOAD ' movie apps on this device?

You have the best video on KZbin testing these microphones! GREAT job.

I'm still using my Zappiti and I just bought a Orico 5 bay raid hard drive or NAS. I'm using all 5 bays and have about 91TBs of hard drive not counting the 16TB drive in the Zappiti. Only bad thing is if it sits to long, it will go to sleep and I have to restart the Zappiti to wake it up.

😂😂😂

Good morning, Thank you for this video. I have a question, I saw that you connected your Umik Microphone directly to your Amplifier. How did you connect it? Shouldn't you normally plug the microphone directly into the computer?

Can you explain how get dolby atmos with a PC, video card, and this OREI device?

Hey Brad, thanks for the video. I’m a getting a pair of SB-1000 pro and I’m wondering whether a mini dsp would be needed or I could make due with the 3-band PEQ on the pros. Point being you wouldn’t normally EQ down more than 3 bands for flatten a sub response so it feels like getting a DSP would be overkill. Essentially, from my perspective, either I get two non-pros + mini dsp or two pros. Would you agree? Thank you !

That actually works! Thank you!!

how do you use this PC with graphics card? My monitor wired with by DP 1.4 to graphics card. Than what to the OREI extractor?

Another solid location for rats is the cave under the Elyssium Falls. Just go to the big cave section (which has sunlight and is pretty big. Cant miss it). There you can collect perfect rat and bat carcasses

I'm confused as hell with the switching between the internal AV test tone and the pink noise from REW. Why are you doing that and what is being adjust when switching berween the two tones? I just understood level matching is to have an SPL meter, run internal AV test tone for each speaker and increase individual speakers to achieve 75dB at zero master volume.

Amazing playlist man. I used to do a lot of rew back in the day but I have pretty much forgotten everything so this was a fantastic refresher.

What about on an ONN ROKU Tv??

Great video and tutorial! You can tell whether or not a teacher is knowledgeable by their effectiveness in presenting material to those of us who are not.

another benefit of internal hard drive is faster transfer rates

I bought this thing because this video made it look easy. I'm sure it would be if my steps were the same as the ones in the video. Did anyone else have this problem?

Been using Nvidia Shield TV Pro for years with Emby and Jellyfin from Linux server connected to Truenas Core NAS, never had problems with stutter. Loads really fast 4K TrueHD atmos or whatever i throw at it. Also does upscaling really well. What i´d like to know if the image quality is any better.

Hello I’ve read that audyssey can calculate speaker distances wrong. Do you check with tape measure after and change if needed ???

Does anyone else have a software template that is totally different? Also the current minidsp web page is no longer like in the video

My software is different than yours. The video and my DSP are rendered useless😢😭😅

Does this work with passive speakers

Great Video!!!

A question: great video, very informative, thanks, but I still can't connect DiracLiveProcessor to my HiFi system in a pure stereo setup without a Dirac device in my forementioned HiFi system. I can see a 'Dirac Virtual Audio Device' setting in my iMac Audio/Midi application, but don't know how to use it in conjunction with my HiFi system, or should I connect my DAC with a USB cable I don't prefer? Normally I play music through Audirvana by UPnP to my Lindemann audio bridge 2 and from there to my DAC.

Hey bro thx 4 a great video! ♥️

This made me laugh wayyyyy too hard hahah! New to the channel! Great stuff!

When a bald man shaves his head when does he know when to stop🤡

It’s easier to understand when someone knows what that all means and what the graph means as well. I am totally ignorant when it comes to sub correction. Also how to even use the REW. Is there a simple to understand video that explains the how’s and what is of it all. I understand that REW is an app , but it’s rocket science to me at this time. 😢 I’m sure those that speak subwoofer talk can easily relate to you , but I didn’t understand a thing , not your fault, just my need for some subwoofer knowledge..🫣

I don't know if this is considered as entry level, then what my Pioneer Andrew Jones one is considered as?

my avr is across the room from the sofa is located and cable is short and does not reach what do I do.

Do you have a video on atmos speaker placement in a livingroom? I have front hight speaker above the front main, but im thinking about front middle as well. Rear hight does not make sence in my room.

Thank You for comparison. May I ask for app. I thought PB x000 with PRO distinguish subs with control application from no app , no PRO subs. Coz there is no 3000 PRO model, can one be sure to have same functions as PRO models - with working app ?? Thanks

Brand new to all of this but just bought a marantz cinema 60 and have polk r700 speakers. I have no subwoofer currently. In that case should I just ignore the subwoofer setup info mentioned here it is there some other setup I should do prior to running it?

Hi

Are there any chuffing issues?

They are excellent. Bought 2.1a cable from svs and connected to zidoo. Its amazing

Hi Brad, thank you for the tutorial. I have no DSP, can you please clarify when you mentioned turn off each sub when measuring, did you mean physically turning off the sub by the switch?

Wanting to find best picture settings for a Vizo 4k ultra Quantum Pro. My setting options are not like this video

I had assumed changing speaker distances changed the timing of when a certain channel is played to attempt to get the sound to arrive at the listening position at the same time, is that not the case? If not does it just change the output level of that channel so a further speaker is heard as loud as a closer speaker? Not seeing how changing distances in the AVR changes frequency response

This zapiti reincarnated is at their old ways, i have ordered from their french branch since April 2024 and until now i did not receive it nor compensated in spite of many messages to them, really bad i hope no one will review their product...

Do you really need THAT much dynamic range for sub? I was always under the impression that the thx standard is +30 db at reference for sub channel. So if you listen at 85 db, you should ideally have 115 db output capability down to 20hz. (Which is A LOT) But most people do not listen at reference. A lot of people watch movies at -10 and (with a 75db average listening level). In this scenario the sub should only need to go to 105db at 20hz to be playing the full signal. Of course, room size, listening distance etc plays a role in this. But your numbers seem a bit exaggerated. Or am I wrong?

Great video! I’m wondering if this remote would connect to a rocketfish HDMI switcher? The HDMI switcher does have a remote. Thanks!

Ok, so you still could not directly explain what to do in the volume calibration?

why are you crossing over at 80hz instead of higher? I believe these subs (I got the same one) roll off closer to 200+Hz... I just got a second sub (SVS SB2K) and I'm running my PB in sealed mode as it's less boomy overall in my basement..

I thought my new SVS app would use my iPhone mic to analyze my room acoustics! Boy was I wrong. Any tutorials on how to calveate my sub to my room using REW? I’m not familiar with REW so guess I’m looking for a consolidated turorial. Any suggestions? I use a Marantz Stereo 70s which came with a mic, but has nowhere to plug it. I do have the Audyssey phone app. Can I use that to set my SVS app?

I found 4 animals in the first place in the video.

No one shows how to connect the dsp to your amp. Can you use an integrated amp? what plugs into the amp?