Adventure-Spec Tenere 700 side panels and top rack installation

[@AK_ADV]

Very nice. I just ordered a set of these racks for my T7. Glad to see they work with the hp corse exhaust as ill be getting that as well soon. Thanks for the video

[@AdvAnywhere]

That's awesome! You will probably need some adjustments but it will fit 👌

[@grumpy-a3391]

Good day. Tell me please ( perhaps you have experience ) the trunk is not very high? Can it be combined with Reckless 80L of Mosco. Thank you .

[@AdvAnywhere]

Hi, to be hones I'm not sure about Mosko but it looks like it need a lot of flat area to hang stable

[@BigDaveTALKS]

hey what exhaust is that. I just got a T7 and the only exhaust i can find to relocate the can higher, requires me to cut the exhaust hanger. I'm not down with that. Thanks for this video, I will definitely go with those side racks. They look great and like you said, they aren't sharp. That is attention to detail in craftsmanship

[@AdvAnywhere]

Hey! This is HP Corse exhaust, I highly recommend it, it's also ultra-light (titanium)

[@petrhanousek4301]

Check out Mivv high mount exhaust. I love the look and where it sits!

[@AdvAnywhere]

@@petrhanousek4301 Probably my friend will soon install it. I will do a comparison :)

[@Blockbuster2033]

What's the exhaust where you have to cut the hanger? I'm interested...

[@AdvAnywhere]

@Blockbuster2033 hp corse high exhaust. No cutting needed

[@jimkeal7357]

What tail tidy are you running? Looks to work well with the high exhaust.

[@AdvAnywhere]

It's Puig, works great but you have to make some modifications with mounting turn indicators

[@RoJo_moto]

Looks much better. You may want to invest in an Impact Drill. Better to use than an actual drill and avoids the potential to strip threads.

[@AdvAnywhere]

Yes, I'm using impact driver with up to 22 N·m 👌

[@baksi07]

Buddy what are those tail tidy you are using? Thank you.

[@AdvAnywhere]

It's Puig tidy tail Very light and strong

[@baksi07]

@@AdvAnywhere Thanks for the reply sharing information. That's awesome to know that it works well with HP corse.

[@AdvAnywhere]

You will have to make some adjustments with indicators to offset them a little bit.

[@motosekcjakanal]

Czy dedykowany do Tenere zestaw montażowy Kriega osBase będzie dalej pasował z tymi boczkami od AS?

[@AdvAnywhere]

Nie przymierzałem, ale może być ciut za szeroko. Ale nie widzę sensu używania os base bo torby Kriegi montujesz bezpośrednio do płyt AS. One nawet są tak pomierzone, żeby Torby OS się do nich idealnie wpięły.

[@motosekcjakanal]

@@AdvAnywhere tylko z OS base jest fajne to, ze odpinasz 2 paski boczne, luzujesz tylko klamry i cały bagaż wypinasz i za uchwyt na OS Base zabierasz ze sobą. Jakbym miał każda torbę po kolej odpinac to 🫢

[@AdvAnywhere]

Tak to jest jedna z wielu zalet OS base. Nie mam tutaj u siebie niestety os base żeby sprawdzić czy siądzie, najlepiej będzie podjechać do pierwszego lepszego sklepu i sprawdzić ✌️

[@maxdamage00]

Thanks for video. Can you please tell me brand of the side rack (old one, you have exchange). Thank you

[@AdvAnywhere]

I found it on facebook Tenere group. I don't think it was branded but I've seen some sellers use the same design.

[@garyrourke3284]

not sure but it looks alot like Bulldozer Metal Accessories?

[@AdvAnywhere]

Looks like they use the same design

[@MTBNosek]

Z jakim momentem przykrecasz sruby mocujace panele i centralny stelaz?

[@AdvAnywhere]

Na oko ręką bez używania siły. Nie ma co gwintu męczyć. Polecam niebieski klej do śrub, wtedy się nic nie wykręca przez wibracje.

[@SuperGianluka88]

What softbags are you using with those panniers? Also do you know if they are compatible with the official yamaha rear rack?

[@AdvAnywhere]

Kriega OS, these should be compatible with any rack ✌️

[@hansverhoeven5156]

@@AdvAnywhere Hello, nice video. Is it the Kriega OS6?

[@AdvAnywhere]

Yes, OS6 :)

[@rickc6726]

Hi, can you still take a pillion passenger, as the rack bars look high? 🤔👍

[@AdvAnywhere]

Yes, it doesn't interrupt seating space ✌️

[@Plaerch]

Disculpa, ¿Como solucionaste la compatibilidad del rack derecho y el tubo hp corse ?. La pieza que trae el kit no vale. Me puedes ayudar por favor?, Przepraszam, jak rozwiązałeś problem kompatybilności prawego stojaka i tuby HP Corse? Część dołączona do zestawu nie jest tego warta. Czy możesz mi pomóc?

[@AdvAnywhere]

I have small piece cutted from metal sheet of 5mm. The best option is to get rid of passenger foot pegs

[@Jirka-wd8tv]

Hi, At the end of the video you can see that you used a different front mount, why? And from which manufacturer?

[@AdvAnywhere]

I have hpcorse exhaust which collides with the standard mounting part. You have to make a little DIY modification to fit it. In my case, I used an old piece of metal. You can also throw away passenger pegs and forget about mounting problems will fit well. Cheers

[@craigprice46464646]

Can you take a close up photo of the bracket you made please.

[@craigprice46464646]

​@@AdvAnywhereCan you take a photo of the bracket you made please.

[@AdvAnywhere]

advanywhere.com/adventure-spec-hp-corse-kriega-2/

[@markoan4339]

Hola¿Cuáles tenías puestos con anterioridad?

[@AdvAnywhere]

I found them on Tenere 700 Facebook

[@2wheels1guy25]

You are quiet the perfectionist😅 But I agree the AS is more better!

[@AdvAnywhere]

Haha I will take that as a compliment 😂 but yeah sometimes small things irritate me :D I always look for a place to improvements ✌️

[@MotoPavilion]

Looks nice but I think it is not practical for rackless soft luggage like Mosko Moto 80L or Giant Loop horse shoe bags.

[@AdvAnywhere]

Isn't the point of rackless system to work without the rack? ;)

[@MotoPavilion]

@@AdvAnywhere Yes, it is the. What I am saying here is the handles from the rear rack are way to up and they are going to be one the way of the rackless system.

[@AdvAnywhere]

@@MotoPavilion Yeah, different system, different solutions

[@petrhanousek4301]

​@@MotoPavilionWhy would it be in the way? They actually recommend to have some sort of top rack so you have somewhere to mount those rackless bags...

[@boduloo]

Hi! Woul’d you sell the old rack that you took off?

[@AdvAnywhere]

Already sold