Injen should build a inlet duct and air box for the 2.4 Lancers for short ram intake ,the intake needs to be refresh it was originally designed for 08 and 09 2.0 L, maybe an Evolution Short ram intake would be nice
@gentlemonsterkennels8 жыл бұрын
I have a stock 2014 Evo X with 3,500 miles. By adding this with no tune, I will gain 17 hp? Running it without a tune would not harm anything correct?
@josephvillaflor22737 жыл бұрын
Button head screws on mine seized 😪 can't remove the lid off my box to check my filter. Any suggestions on how i can get the screws off? Wd40 wont work.. i even tried vice grips already to no avail 😖
@jaynizar98763 жыл бұрын
Do you have this part for Mitsubishi ASX / Outlander Sport 2012 ??
@Djm93934 жыл бұрын
Any advice on removing the stuck vaccum tubr that connects to the boost solenoid?
@trevorhunt48458 жыл бұрын
I had put mine on and it lasted only 2 days. I was over boosting so my car was throwing different codes. You definitely need a tune after installation or you can say good bye to your car!
@fatalcapsaicin51574 жыл бұрын
Lmao!! Maybe I won't do this to me 2014
@PureEvolution3 жыл бұрын
@@fatalcapsaicin5157 i put mine in had no difference except a little faster spool down low
@joemazzurco89317 жыл бұрын
Hey just wondering i have a k&n intake system right now...upgrading with aem intake but noticed that on the k&n have a pcv fitting and smaller fitting to the boost controller thats it..but aem intake has a pcv fitting and two smaller fittings so what do i do??i only need one??
@keronkensell6 жыл бұрын
Hoses that came with mine were ridiculously small. The plastic valves can’t go into the hoses without raping it! Glass cleaner or not
@Djm93937 жыл бұрын
do we have to disconnect the negative battery is it necessary?
@jacobhoward70936 жыл бұрын
Installed, sounds great. Running stock tune. Am I safe or do I need a tune? 2015 Evo gsr.
@kenly68586 жыл бұрын
I'd get a tune. Intakes are notorious for making cars run lean. I would not run it until you have a tune for it
@jacobhoward70936 жыл бұрын
Ken Ly got innovative gauges coming today. I’ll install them, and see if I’m running lean. Thanks man
@kenly68586 жыл бұрын
Good choice on Innovative Gauges. Yeah check your AFRs. You want to be in the 14.7 range. It will go up and down a "little" however it should be within that range. If its higher than that, its running lean
@jacobhoward70936 жыл бұрын
Ken Ly any chance you know a good hook up for the tach/shift light for the innovate boost gauge?
@kenly68586 жыл бұрын
I do not believe Innovate carries one. However, there are plenty to choose from. If you want something that matches. I would get something like this. www.maperformance.com/collections/all-electronic-components/products/prosport-performance-3-3-4-tachometer-343sarta-b
@raneyy39774 жыл бұрын
What boost controller or solenoid is used in this video ?
@FredrickChannel7 жыл бұрын
is it the same instruction for ralliart model?
@McMeevin7 жыл бұрын
It won't fit because of the battery being located in the engine bay
@congkue46704 жыл бұрын
Why do they not make this model for 2015???? Its illegal for me to purchase this without correct carb
@jezreelquielrosales59435 жыл бұрын
is it possible to install this without the airbox
@mactwentytwentyfour8 жыл бұрын
can you do an install video on a regular lancer? preferably a 2015?
@fatalcapsaicin51574 жыл бұрын
kzbin.info/www/bejne/d2q9pnWJn85ofrM Did you ever do it?
@Mannycreated5 жыл бұрын
At 5:50 where can I get that piece for the pcv hose to connect it too the intake
@1988Aliceeve9 жыл бұрын
do you need a tune after installing the intake on a 2014 gsr evolution
@AEMintakes9 жыл бұрын
+steven phimmasene Not if it's stock.
@ijv55675 жыл бұрын
why would you risk destroying your car and getting insurance troubles over a shitty 17hp on a car that already has like 300 hp?
@mrjbevox25989 жыл бұрын
Having issues taking off the two vacuum lines to wastegate solenoid. In the video he pulls them right off but mine are stubborn , any suggestions?