Anyone who will stop to say hello to a porcupine is a good person.
@paststeve14 жыл бұрын
Happy Fathers Day to you, your Dad and anybody else out there today!
@lukestrasser4 жыл бұрын
Your ability to "scrounge some spare rocks" while 150 feet from a century old rock pile and slight jabs at paint weren't lost on me... I'm certain your dad misses his father today, but is proud to be a father himself. Happy Fathers Day to him. I know Rick has said you've been really dry up there, hopefully your swamp watering system for the garden is working well.
@jbj274064 жыл бұрын
If I were going to have chosen a different one of your machines to have done this last tumble bug job, I think it would have been the motor grader. (I know it's not running right now). A dozer is too aggressive for the fine work that the tumble bug can do, plus the tumble bug transports material, and you can cut and fill, and not just push. I love a motor grader. We had a Cat 12D or E (if I remember correctly) at Lambeth Construction Company where I drove a tandem dump truck during college summers for a few years in the late sixties/early seventies. We roughed in roads and streets and large building sites. Then Thompson-Arthur would come in and fine grade, put down and roll stone, and pave and curb and gutter. Occasionally, I would get to run a few other pieces a little bit, but they mostly were the domain of the primary operators, and we respected those guys. We had two D7's, the motor grader, a 977 track loader (a beast), a Gradall, and several other smaller pieces of equipment. Infrequently, we would have a couple of articulated pan scrapers that would come from somewhere. The old fellow who ran the Gradall could comb your hair with it, and the other Caterpillar guys were really good too, but the gentleman who ran the motor grader was kind of the default king of the crew. We took care of our equipment, we called the owners and the superintendents Mr. such and such, and everybody did their job. And we all had a great time. Everybody acted like they had some damn sense and we were relaxed, productive and safe. That was kind of a magic moment in life when I think back about it. I'm very grateful for that experience. Thank you and Senior for all your work. Come to think of it, the owner's had their father's old original D4 displayed at the company entrance with a clean paint job on it. The machine that started the business.
@soundadvicesomewhere90272 жыл бұрын
Great to find your site! And learn about the old CATs other antique equipment - some knowledge like this is priceless & Thanks for Sharing !!
@corpnut29064 жыл бұрын
I love that ten thank you for the back story on her.
@alanharney52784 жыл бұрын
12:58: "Now I kind of want the tank too". LMAO!
@thefixerofbrokenstuff4 жыл бұрын
Yeah I caught that too. Doggone it, now I want a tank too. Heck, who dont want a tank? Commies and men who wear short shorts.....thats who!
@ramsay194814 жыл бұрын
We called the d2 we had at work a bucking horse if it was used to do any kind of dirt work...It was better suited to pushing coal in the bottom of barges on the steel floor.. The d2 was light enough to be lowered and hoisted with the crane we had attached to a clamshell bucket....That was forty years ago .. Cheers; Mike in Louisiana
@tractorhyatt70444 жыл бұрын
Another after hours in the shop edition. Thanks for sharing this with us. 🇺🇸🚜👍
@robertinscoe23794 жыл бұрын
More information on the litte Ten, love it. That little Ten has a special place in my heart as a man i knew in Miami had a photo of him as a young man in leaning on the track. Picture was taken in Cuba ,that one and some others and the clothes on his back were all he escaped with. His whole family were jailed and he never heard from them again.
@christophereaves8622 жыл бұрын
That spot would be a great spot for a pond
@snocrushr2 жыл бұрын
Cool Bucryus Erie name plates. I worked on Bucryus cable tool well drilling machines for many years. I snagged the plates off the Bucyrus Armstrong W-29 drilling machine when it went for scrap. Hanging in my shop now. 🇨🇦
@rdaw334 жыл бұрын
Love your attention to detail!!!....The all American way is to have at least three times the projects than you can do in your life!! When I was young on the farm, there was an old piece of equipment behind the shop that as I remember looked like the Tumblebug. I don't remember my dad using it. Love the video of you working old equipment the way is was meant to be used.....Thanks!!!!
@johnwudarcki93154 жыл бұрын
Worn out undercarriage made me think about working for my uncle. We did pins and bushings on the tracks. He took and hard face welded the rollers for days. I beat the pins and bushings out with a 20lb sledgehammer. That took me 4-5 half days after school.
@greenmule46344 жыл бұрын
thats ok talk and tell us all you want, the longer the video the better,enjoy all of them, thanks Squatch
@mitchellnoll74024 жыл бұрын
I have heard that comment before about how much you can move with a Tumble Bug thanks for the explanation makes more sense to me now
@challengerhitchman4 жыл бұрын
I was going to compliment you for using the swing drawbar feature last week. To many farmers today don't understand that feature on new tractors.
@Fatamus4 жыл бұрын
Happy Fathers Day to you and Senior.
@Denis-tu1pd2 ай бұрын
On the draw bar show the rd6 pulling that huge stump and with the fixed draw bar .
@shaneharrison47752 жыл бұрын
Oh crap you got my eyes both twitching like mad but I never knew that the cat 10 was a auto patrol track grader with the rear start drive very cool
@kiiiisu4 жыл бұрын
i got so many answers i didnt even ask lol good stuff!
@patzke4 жыл бұрын
Love watching videos when you answer the “why” questions.
@joekahno4 жыл бұрын
I spent some time as a mechanic for a small excavating outfit. They didn't have a lot of equipment but did have a selection and a boss who was a stickler about choosing the best tool for the job whenever possible.
@colin85324 жыл бұрын
Love these videos when you talk about all this stuff. You may think you're going on and on, but the information you share is wonderful. You'd make an excellent teacher. That Cat ten would be awesome in your fleet if it still had the grader attachment, still pretty cool though.
@zahirrussell2343 жыл бұрын
i dont mean to be so offtopic but does anybody know a way to log back into an Instagram account..? I stupidly forgot my login password. I would appreciate any tips you can offer me!
@ephraimzachariah59213 жыл бұрын
@Zahir Russell instablaster :)
@zahirrussell2343 жыл бұрын
@Ephraim Zachariah I really appreciate your reply. I found the site thru google and Im in the hacking process now. Seems to take quite some time so I will reply here later with my results.
@zahirrussell2343 жыл бұрын
@Ephraim Zachariah It worked and I now got access to my account again. I am so happy! Thank you so much, you saved my account!
@ephraimzachariah59213 жыл бұрын
@Zahir Russell happy to help =)
@shifty42774 жыл бұрын
I don’t mind the longer videos!! Always a pleasure squatch!
@michaelmcclure86734 жыл бұрын
Back in the mid 2000 I moved a complete ring gear ⚙ from Bucyrus Erie . The machine being built was a drag line for a stip coal operation. It took me 4 loads to move it. I guess now its Caterpillar surface mining. You would've love the big machines in the building 🤣.
@thinman86213 жыл бұрын
Having at least one tank . . . Yes!
@Grandpa825474 жыл бұрын
Being on a "vintage" thermometer, that would be degrees "Centigrade". That is what it was called when I went to school, and I'm pretty "vintage".
@regsparkes65074 жыл бұрын
Lot's of good history and interesting stories on that Ten. Those prices though were just as difficult to reach as prices are today, I think. Just for kicks, I looked it up on Google, and one dollar in 1930 is worth about $15.35 today,..so think on that! LOL
@raycollington43104 жыл бұрын
We had Ruston-Bucyrus in UK which was formed in 1930 jointly owned by Ruston & Hornsby in UK and Bucyrus-Erie of Ohio. Fantastic range of draglines (RB22 & RB38 etc) I recall they were not easy to master!
@rays28774 жыл бұрын
Quite an education on dirt moving. Thanks
@jtthill54754 жыл бұрын
Happy Fathers Day. Thanks for sharing your knowledge.
@waltermattson55664 жыл бұрын
That was another fun video. It would be interesting to know where each of your machine came from and the jobs they used to do and how long you have had them.
@landerson10124 жыл бұрын
Informative video. Thanks for the run down. Glad to see that you were able to scrounge around for some rare to find rocks for the ripple dams. Here in the southwest corner of the state, rocks are subject to field rollers. Good way to control water erosion. The local river has them put in when the dam was removed.
@m38_depotharold124 жыл бұрын
Twenty mins is good!! Loved the video!!
@tomr30742 жыл бұрын
This channel makes me want a dozer soo bad!!!!!! For logging and general tearing up stuff.
@michaelbaumgardner25304 жыл бұрын
Hard to believe that there was a grader on the 10 very cool video...👍👍
@scrotiemcboogerballs19814 жыл бұрын
You made me so happy to hear you are going to redo the ten that means you are going to put out more vids yes yes I love it you and your father are great people and I love everything you guys are doing take care buddy I can't wait for the next video god bless you
@cassiuspuckett87894 жыл бұрын
Good discussion about how you got it done. I did realize how effective that swing hitch was when pulling an implement. Thanks for sharing....
@gregoryschmitz2131 Жыл бұрын
Love it, I live in Alaska, that is too cool. I love the After Hours in the Shop, lots of great explanations and information. And no apologies for going on, we have the tools to skip but rarely do I, its interesting and finding out things I never knew.
@johnrhodes4744 жыл бұрын
In your best Christopher Walken voice more Tumble Bug!!!
@RomeKG4714 жыл бұрын
The early D2's were not good dozer tractors because the track frames were short, in 1954 an improved D2 came out with longer track frames and a longer clutch housing lengthening the tractor and making it more stable.
@kiiiisu4 жыл бұрын
but now i want the tank too hahah, man cant ever have enought toys
@johnpreisler67134 жыл бұрын
I had never heard of Bucyrus/Erie making anything other than large equipment like drag lines and railroad wrecking cranes
@antoniolepore68754 жыл бұрын
Nice story on the little Ten. Sandblast grit does get every where, when I restored my Farmall 504 i took a full day to protect all the seals with mastic and duct tape.
@motorv8N3 жыл бұрын
Thanks for these great insights on how all this machinery actually performs in the real world. Want to look into a small-ish dozer/crawler for pushing snow down a back country lane a half mile or so to the road. Wondered how a Cat Ten or Fifteen might fare for that. I have a '52 Ferguson TEA20 (think Ford 8N clone with overhead valves...) but the open diff just won't pull a rear mounted blower through much even with weights and chains. Plus, heck - little dozers just look like a ton o fun. 😎
@bobuk57224 жыл бұрын
Hi Squatch. Nicely presented history of the 'Ten' supported by good cut in edits. It all takes time, I know, so thank you! BobUK.
@marks80684 жыл бұрын
Will you ever get to the grader project? I think you should.. it would make the endresult of your earthworks look so much nicer I think.
@michaelwest43254 жыл бұрын
Just a quick thank you for all the information and effort to share. I dream of getting a small dozer and know of one that is really just a lump of rusted metal, likely never in my future but I can watch and enjoy the process. Thank you again. And I do not like to paint.
@Fatamus4 жыл бұрын
Great info on the 10, it is a cute lil thing, I say lil cuz I'm 6'4" and mumble and a half pounds (lost 80lbs) and can't even fit in a bobcat and close the start bar so I need at least a 955 LOL. Met a guy locally that has a Twenty Two for sale and it is too small for me as well. I have a post on ACMOC if anyone is interested. You are welcome for the Bucyrus Erie porcelain emblem but you didn't explain why I gave the it to you .... because you humbly give out valuable information to those of us in need. I've just started working on my old Cat's (comparatively) and the information saves me time and hundreds of dollars to date, and counting - you have more than earned the porcelain emblem .
@danielbutler36734 жыл бұрын
Looking forward to you building the starting engine for 1113. Still hope you will combine the engine off your grandpa's D2 with 1113's parts. I think that would be fitting to keep another part of your grandpa's tractor going.
@therealblue424 жыл бұрын
There’s a documentary about a unit of army African Americans (preintegration) using heavy equipment to build roads and railroads in Alaska during WW2. You got some history there.
@anonymousgeorge43214 жыл бұрын
Great video. Thanks, I thoroughly enjoyed it.
@michaelscriffiano87654 жыл бұрын
Thank you sir for another interesting video....
@bobprice31224 жыл бұрын
Well done again ,at least you will not run out of projects happy Father’s Day to you both
@BobPegram4 жыл бұрын
Thanks Squatch253, I always like to learn stuff like this and you present it well. In between everything else, get some good grub and your much needed rest!
@nielmadsen98064 жыл бұрын
Great video you know the little inns and outs that you know in the history is priceless and thank you for answering my question I asked a couple weeks ago
@evankibbe5904 жыл бұрын
Cool beans. A good video. Always get excited when I see you have a new video. And i have yet to see a bad one 💝😊😊😊👍🍵☕🍵☕🇺🇸🇺🇸
@dustinmcintosh67994 жыл бұрын
As the years go by watching youtube I will generally change channels (like tv i guess). But ive got to tell you that youve kept my interest for a record several years now. I find myself counting the days until your next vid. Keep it up.
@bobpaterson18454 жыл бұрын
Hate that sandblastin grit 😡 that was a really enjoyable informative video again ty 👍👍
@tjcleave26464 ай бұрын
that's interesting, very cool - too bad the grader is gone.. dang eh
@machinistbytrade4 жыл бұрын
Stay safe Squatch..don't go into the city ....some nasty stuff goin on !
@cyrilhudak45684 жыл бұрын
Thanks, I was wondering about why you didn't use the dozer to grade. Also, we now know why Lineshaft Restorations trashed the PTO on his D2. Drawbar was pinned.
@kevinyork13264 жыл бұрын
My farther bought a cat R D 4. In the 1970s and that too was really pathetic about dosing any thing with that. The blade was to big for it and it had a hard enough time pushing snow. The hydraulics were to slow and it was built the same way as the D 2. I was just in my teens and I could see that a John deer dozer 450 was more proficient that was built in the 70s I know why you used your tractor and tumble bug. You would still be pushing dirt right now to catch up with your tumble bug and tractor.
@martinagoetz84854 жыл бұрын
Worked for bucyrus Erie for 10 years. Made big stuff.pne draglinev220 yard bucket
@steveschumacher54704 жыл бұрын
I have a set of those tags on a bucyrus erie tracked well drill
@garyfeltus98014 жыл бұрын
Very very informative video. There is so much to learn from your videos. Thanks for sharing Al that information.
@bigredgreg14 жыл бұрын
Great content!
@thomaslemay88174 жыл бұрын
Now you've done it you're exposing all the secrets that those of us who actually read manuals or privy to cut it out you're going to make the other people look almost as good.
@whathobogrohknows4 жыл бұрын
Your ten sounds just like my grader my grader wasn’t sandblasted or pressure washed and then painted with a brush and only one coat
@hfdzl4 жыл бұрын
What all did you do to the 'Iron Mistress'? Keep up the good work, enjoy all you vids and can't wait for the next one. HFDZL
@deanehill97304 жыл бұрын
Thanks.
@apatchofheavenfarm28144 жыл бұрын
I might have to try the swinging drawbar
@michellehoefer59224 жыл бұрын
Thank you for the video.
@bcbloc024 жыл бұрын
If only old equipment could talk!
@TheGrumpyFarmer4 жыл бұрын
Ha!!! “Spare rocks” well well if you happen to ever need more “spare rocks” just let me know I have more than enough I could give you I’d even let you come pick some 😂 The only thing your after hours in the shop lacked was a beer in your hand and the Borkster 🤦♂️😂🍺
@donbullock87904 жыл бұрын
Hello; I totally enjoy your channel. I am amazed by your intricate overhaul of the 'X231' project. What's going on with that? Anything new?
@1crazynordlander4 жыл бұрын
Thanks for sharing!
@davewilliams61724 жыл бұрын
Good session man, thank you.
@geoffweinstock68464 жыл бұрын
Enjoyed additional history on the Cat Ten. On a side note, are any of your three No.9 Auto Patrols (8A331, 8A340, 8A539) diesel powered? If so, which one(s)?
@triptisrinivasjanardan39294 жыл бұрын
Geoff Weinstock we'll we wait and see if Squatch replies. In the meantime, of his Auto Patrol number 9 lineup, the latest one he hauled home was a rat rod repower with a Chevy truck engine that was missing before he bought it. Of the two other ones, he removed the engine out of one already so not sure about that and the third one. Other than the Auto patrols however, he does have a caterpillar 212 grader that has the same diesel engine as the D2, the D3400 engine.
@whathobogrohknows4 жыл бұрын
You should talk to one u I f the cat dealers by me they have the right grader that would attach to that I believe
@keithgoenner11244 жыл бұрын
Like your channel
@scruffy61514 жыл бұрын
👍👍
@paulpochan96314 жыл бұрын
Squatch....I was driving by an old equipment salvage yard and spotted an old dozer along the fence complete with blade and canopy. It's painted a lighter green(not quite Forrest Service green). Would like to ID, but it's not in a real convenient place to eyeball. Any ideas?
@paulpochan96314 жыл бұрын
@@squatch253 Thanks for response. Next time by there I'll try and get a few pix. Might be able to see so ID if I get close. I agree with the cheap paint idea.
@roberth54044 жыл бұрын
Hey Squatch, what does that funny looking vice grip do? The one that is located on the lower left of you peg board? Thanks!
@ericcorse4 жыл бұрын
Looks like a drill press hold down.
@notajp4 жыл бұрын
Yep! I actually have a couple of those. You can get them at your local Hazard Fraught....
@ron8274 жыл бұрын
What is the significance of the number 253?
@ron8274 жыл бұрын
@@squatch253 Many thanks for the explanation and what a rare M-M which I hope to see as a local MN show someday. Probably not this year.
@OC3OliverFan4 жыл бұрын
I do have a sign I would love to give it to you
@WasserSquatch4 жыл бұрын
Hey Squatch when exactly do you sleep?
@scottfabel74924 жыл бұрын
Silly question: Where did you get the name Squatch253 from?
@charlesdarby91424 жыл бұрын
Where's the links you stated today's video and Happy Father's day 😁 by the way
@charlesdarby91424 жыл бұрын
@@squatch253 Android format smartphone have no personal computer
@therealblue424 жыл бұрын
I thought that sign said bi-curious at first😂.
@Firegod12344 жыл бұрын
Do you have a address we can send mail to?
@NEAFarmKid40104 жыл бұрын
One question I have for you (and you may not actually have an answer for this yet lol), but do you know what tractor project you'd like to work on after 5J1113?
@NEAFarmKid40103 жыл бұрын
@@mmm365 That's true, I guess I meant after 1113 and X231 lol
@junior11384 жыл бұрын
Don’t paint the Sasquatch: it’ll rust into the colour I expect the Sasquatch actually is. Assuming it’s real.
@LeonardAngussmith4 жыл бұрын
Scrounge some spare rocks , now here would you find them , hahah
@d4v3tm4 жыл бұрын
what about the D6? is that still too small ?
@d4v3tm4 жыл бұрын
@@squatch253 have you considered getting one?
@easternlandclearing104 жыл бұрын
You need an ole traxcavator.
@thefixerofbrokenstuff4 жыл бұрын
Land! You need to find yourself an old rock crusher. You all boys have enough rocks in the piles to gravel the roads for 20 years.