Still waiting for my first pack. Been a long wait. Excellent video as always.
@WorldofWayneUK4 жыл бұрын
It will be with you shortly
@plastiksurgeon91293 жыл бұрын
I had NO IDEA this model existed until I was on a message board and someone brought up the subject of 1/8 scale Jaguar models. It was mentioned that Agora was coming out with a ‘61 Jaguar convertible as they showed a picture of it......and then I saw THIS! I couldn’t resist.....I bought the Cobra subscription! I got the package where they send you four packs in the first round and then followed by the eight packs in eight months. I just finished DeAgostini’s 1/8 scale 1967 Shelby Mustang and this will look terrific sitting next to it when done. 👍🏽👍🏽 GREAT video and you’ve got a new subscriber! 👌🏽
@synthlord23684 жыл бұрын
The paint on the hood (bonnet) is beautifully done! Love the white on blue! This car is gonna be gorgeous!
@NicolaMs0074 жыл бұрын
I've ordered the Limited Edition of the Cobra 427...cant wait for it to come through.... really cant wait to start it... it comes with the first 5 packs WOW!! done the measurements on the model using a tape measure WOW oh WOW this is going to be massive for a car build...1:8 scale blimey
@matttaylor27614 жыл бұрын
The start of a new build, gotta love it! Like the intro, kinda reminded me of a Fast & Furious movie for some reason. Gonna be a fun build, by the looks of it. Cheers!
@keithgrant94654 жыл бұрын
Great work Wayne shes looking nice am sure tony stark had one in iron man.
@MartinFutter704 жыл бұрын
Well everything on this build looks great, love those little padded seats and lovely detail on the air filter 👍
@plastiksurgeon91293 жыл бұрын
For the tires on my 1/8 scale Shelby Mustang, I put them in a food dehydrator and set the temp for 150 degrees and put them in for about 10 minutes. After that, they were nice and soft and the wheels went in with no trouble. DeAgostini recommends the hot water too......the dehydrator was easier for me since it sits right on my table in front of me. 👌🏽
@lakrfan49804 жыл бұрын
In Stage 5, I believe you placed the exhaust tip on the wrong end of the pipe.
@garethw88844 жыл бұрын
Just wow another great look build kit
@rattlinghost89044 жыл бұрын
Looks like a nicely detailed model this!! 👏
4 жыл бұрын
Wow, amazing. Ich freu mich mich schon drauf die Cobra selbst zu basteln. Gruß Mario
@QkyuQ4 жыл бұрын
ford vs ferrari is a nice movie 👍👍
@RMatner4 жыл бұрын
Look forward to watching this build! And congrats on 26k subscribers Wayne.
@WorldofWayneUK4 жыл бұрын
Wow. Just noticed that
@lakrfan49804 жыл бұрын
Modelers should note that Pack 1 assembly instructions do not come in a magazine but can be downloaded from the Agora website.
@James-ce5eg4 жыл бұрын
Nicely build Wayne,it looks amazing aswell.I can't wait to see more videos on this,keep up the good work👍
@rodadams84223 жыл бұрын
Unbelievable for a 3d printer model. Great video looking forward to loads more 😀
@dadmercadventures75264 жыл бұрын
Looking awesome 👍🏼 can’t wait for mine to arrive 👌
@julieblundell74214 жыл бұрын
Hello Wayne, great video mate, looks like another great build, very nice, Lee.
@NicolaMs0074 жыл бұрын
The Shelby Cobra which we're building here is also in the movie "CHARLIES ANGELS - FULL THROTTLE" where Maddison Lee played by Demi Moore, drives it down the street with the angels in pursuit, but hurts me to see a good car go to scrap the way they crashed it in the movie in the end when it crashes into the theatre.
@HugoSoaresCollector4 жыл бұрын
Hello Wayne, very good collection. The steering wheel is similar to the one I'm riding on the Jaguar E-Type. Hug.
@mathewkirby41164 жыл бұрын
Excellent build Wayne 🤙🏻
@PeteJCooper4 жыл бұрын
Lucky you I’m still waiting
@WorldofWayneUK4 жыл бұрын
It will be being shipped shortly
@kdryan213 жыл бұрын
Also featured in the movie 'Bad Boys.'
@rodadams84223 жыл бұрын
Brilliant job 👏
@WorldofWayneUK4 жыл бұрын
When putting the square plate on to the 4 exhaust mufflers ensure the nuts are facing down towards the exhaust. See, I make mistakes so you don't have too. If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below and you can always come find me on social media via the links in the description. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
@bexzacklit38924 жыл бұрын
Hi wayne with the cobra super snake is that world wide and coming out to newsagents in Australia
@WorldofWayneUK4 жыл бұрын
@@bexzacklit3892 it is worldwide but won't be in newsagents. You have to order it through Agora Models
@steve13154 жыл бұрын
Very very nice, one of my top five cars , would love to do this model but the wife won't let me sell the children.
@dr.marclobbesmdphd77443 жыл бұрын
I painted the outlets of the exhaust mat black on the inner side to give them more of a exhaust look. Better this way
@NicolaMs0074 жыл бұрын
blimey it came through today, all 5 packs didn't come, but contacted them, they said that have already paid for the first 5 packs but they dont all come at once....which is what I thought it would happen as it is my first time with agora models, they could have said it more clearly that you dont get the full 5 packs at once, if you know what i mean... I checked out the first pack and blimey oh WOW!!! the metal parts are heavy, it's got some weight to it....blimey cant wait til I start it though, might leave til i get a few packs all together before starting, this way, it would give me something to do.
@grzegorzsenska8884 жыл бұрын
mega film
@peterholland23504 жыл бұрын
wayne you put the square exhaust plates the wrong way round,the nut details should face the exhaust..
@WorldofWayneUK4 жыл бұрын
Yep. You are right. Silly me. Easy to fix though. Thank you Peter
@ianknights14724 жыл бұрын
I think it's correct Wayne the way you have done it , when you see the picture of the finished engine in the next pack you will see why 👍
@milanondrak55644 жыл бұрын
I know somebody who has a kit car version of this car. He has the V8 and gearbox from a 2012 Mustang under the bonnet to get it moving.
@gunnarbiker4 жыл бұрын
I got the shipment email for my Jeep Willy parts!!! Can't wait to get my meat hooks on it!!!!
@PeteJCooper4 жыл бұрын
No oil when screwing in to metal?
@WorldofWayneUK4 жыл бұрын
No. The screws seems to gonin perfect on this model
@claytonkimber18954 жыл бұрын
at 22:32 on your video you joined the piece of exhaust to the wrong end i think sir.
@Marty591433 жыл бұрын
In your opinion is this model close enough to scale up and build an accurate full size car? Thank you.
@WorldofWayneUK3 жыл бұрын
If I could I would. Theoretically yes. The engine would need work though
@Andy.Gledhill.Models.4 жыл бұрын
Well, I finally decided this is the build I am going to do. Put my order in today. Although I went for the basic model over 12 months. I do not think the extra nearly £290 for the limited edition is worth it. I found out via the Agora forums, that they are going to release a general display stand for their model car builds later. So I will probably buy that stand for the Cobra later.
@ianknights14724 жыл бұрын
If you had ordered on release it was £50 more and choice of reg number, but good choice anyway the agora stuff and customer service is faultless.
@Andy.Gledhill.Models.4 жыл бұрын
@@ianknights1472 Yeah, looking forward to building it. I just did not think it was worth the extra cost for a fancy stand and number plate.
@mikeking25392 жыл бұрын
Wow so it's taken almost two years to build the full model?
@WorldofWayneUK2 жыл бұрын
The model was finished a while ago but I wanted to display it with the stand and book
@mikeking25392 жыл бұрын
@@WorldofWayneUK Oh, I see, lol
@andrewsandoz80052 жыл бұрын
That's actually the manifold not the block.
@luisecheverri97446 ай бұрын
a Question. I have lern after many cars that is better no to put the wheels until the end. Do you agree?
@WorldofWayneUK6 ай бұрын
That's probably a good.idea
@udomartens35574 жыл бұрын
Super Job 👍👍👍👏👏👏❤️❤️❤️
@thorstenadler20394 жыл бұрын
Hallooooooo Sehr geil.... Den werd ich auch Bauen müssen.. Der ist Kult... Liebe Grüße aus Deutschland Modellbau Schwaben Thorsten
@WorldofWayneUK4 жыл бұрын
Es sieht aus wie ein toller Build
@PeteJCooper3 жыл бұрын
Hello Wayne what should the orientation been of the hood handles when there closed up ?
@WorldofWayneUK3 жыл бұрын
Should be in lone with car locked. Perpendicular to car unlocked
@carlosotavioderezende84674 жыл бұрын
Super!😊👏👍
@Andy.Gledhill.Models.4 жыл бұрын
I think you made mistakes with the exhaust pipes. At 21.49 It looks like you put that end plate over the ends of the 4 pipes, the wrong way round. I think the nut detail should be facing towards the 4 pipes, not the other way round. When you attach it to the car later, the nut detail will be facing outwards. The way you did it, I think is wrong way round. Same with other exhaust at 25.12.
@WorldofWayneUK4 жыл бұрын
Yep. I have changed it. Always making mistakes me lol
@marcblackburn59204 жыл бұрын
Speaking of Ford v. Ferrari, what happened to that beautiful red Ferrari you were building?
@WorldofWayneUK4 жыл бұрын
Still waiting on a delivery
@lobsterman57862 жыл бұрын
Anybody making this into the polished Kirkham? I have an extra Agora body Stage 85 to practice on.......
@COBRATV4274 жыл бұрын
😍 👍
@ricardagottschalk90892 жыл бұрын
Very nice but expensive.😎
@richardbuchli40717 ай бұрын
Hello Wayne. I'm hoping you'll respond to me in a timely manner. After watching your videos, I ordered the 427 Shelby Cobra model. I received it today. However, does this thing not come with instructions? I ordered the complete kit and I have been through every box in here and I have not found any instructions or my book on the history of the Shelby Cobra. Please help me out here.
@WorldofWayneUK7 ай бұрын
No. The instructions are online. Just go to www.agoramodels.com and click on the download tab.
@richardbuchli40717 ай бұрын
Wow, that's not good. This may seem strange but I have no internet or cable service into my house since my girlfriend and I don't really watch TV. So I'm going to have to try to put this car together looking at the instructions on my phone. Had I known this beforehand I might not have ordered this model. And I also didn't get my book on the history of the Shelby Cobra! Not to happy right now!☹️
@WorldofWayneUK7 ай бұрын
@richardbuchli4071 that normally comes after the delivery. All of Agoras instructions are online only. I hope if you watch my videos you will have an easier time of it.
@richardbuchli40717 ай бұрын
I think I better watch your videos again. And I like the tip on using the oil on the screws.👍
@richardbuchli40716 ай бұрын
Hello Wayne. I've started building my Shelby Cobra. I'm doing it with my phone. I did finally get cable and Internet Service though.😁 There were a couple of pieces on the engine I had to work on and tried to use Tamiya's extra thin cement to glue the pieces together but it didn't hold. Didn't you mention using super glue, and do you use a certain type. I'd really appreciate it if you could help me.👍
@stephenparkes6264 жыл бұрын
morning Wayne ,what happened to the f40 ferrari build
@WorldofWayneUK4 жыл бұрын
Still waiting for a delivery. Centauria has been in touch to say there are significant delays.
@stephenparkes6264 жыл бұрын
@@WorldofWayneUK omg seems a life time since you last did it,i watched one of the Germans buy in one go le ferrari think he said cost £1000 from Italy and that was an amazing build to watch and when finished looked fantastic,
@ramanjeet11113 жыл бұрын
which one according to u is the best model kit manufacturer and which one is the cheapest
@WorldofWayneUK3 жыл бұрын
I have no idea. The companies we see are distributors not manufacturers. There are a few based in China but that is out of my realms of knowledge.
@ramanjeet11113 жыл бұрын
@@WorldofWayneUK hmm
@ramanjeet11113 жыл бұрын
@@WorldofWayneUK which one is ur personal favourite
@WorldofWayneUK3 жыл бұрын
@@ramanjeet1111 in terms of partworks I have 3 which stand out. The Bismarck, the Enterprise and the Ecto-1
@ramanjeet11113 жыл бұрын
@@WorldofWayneUK hahahah........are you always online..............thx for being so prompt
@stewpotsmancave18704 жыл бұрын
Well I am amazed so we have gone down the adds route whilst watching this I saw 5 adds 1 at the beginning is this what we are going to see now, interruptions from adverts I like your video's as there is usually one add at the beginning but honestly this spoiled the watch sorry just my opinion, sorry. But trying to be truthful Wayne
@WorldofWayneUK4 жыл бұрын
Totally understand. I dont have a say in the ads. KZbin just put them willy nilly on the video. I thought we had solved the problem but obviously its still broken.
@Andy.Gledhill.Models.4 жыл бұрын
I hardly ever see any ads.
@WorldofWayneUK4 жыл бұрын
@@Andy.Gledhill.Models. I am at a loss. No idea why some see loads and some not at all
@Andy.Gledhill.Models.4 жыл бұрын
@@WorldofWayneUK maybe its because I am using Adblock Plus on Firefox Browser?
@bedfordshiremodeller44914 жыл бұрын
At least it,s an oridginal build from Agora Models