AGT Uragan 2 full disassembly

[@paulspeller968]

absolutely awesome mate . gives me a bit of confidence to take a rifle apart because the steps you show are detailed and easy to follow i appreciate the time and effort you put into these videos my friend thank you 🙏

[@sub12airgunners]

Thank you for watching

[@bigchad2374]

i love the fact your not trying to sell me a gun your just showing me what im going to get if i decide to buy one. one of the few well done 👍

[@sub12airgunners]

😀

[@Tony-o1b]

Very well covered and quite a nice rifle.

[@sub12airgunners]

thanks 😀

[@steveblaylock8662]

Great video and thank you for clearing up the trigger creep adjustment looking forward to your mods on this fantastic air rifle

[@sub12airgunners]

Thanks much appreciated. Thanks for watching.

[@sutana26]

Interesting valve system, looks like using balance valve, i see small hole on valve stem at 20:17 Is that hole are from delrin side? Hope you make video about that. Thank you..

[@redgum1340]

G'day, Super duper disassembly video. I truly liked the method you progressed with all info and no BS as many others do when they do stuff like this. The rifle looks seriously well manufactured. Does it shoot consistently? Good on ya mate.

[@sub12airgunners]

Yes it's very consistent it's a great gun thanks for watching

[@PaulSmith-jr1qe]

Hi, The usual high quality build you come to expect from AGT and again the usual in depth explanation we have come to expect from your exellent videos, I was left with only two questions one being what does the cover screw you removed on the side of the rear block at 19 mins 17 seconds actually expose and does it restrict air flow in any way, and the other being have you had any of the problems I hear of regarding the balanced valve arrangement.

[@thommytom]

Very nice! Do you know the thread on the bottle ?

[@Jknox]

I think I enjoy this as much as the actual shooting so look forward to further knowledge.

[@sub12airgunners]

thank you

[@gazzad8257]

Hi Love your video Is that work mat available to buy??

[@fabiofernandestirodepressa3847]

Olá. Essa alteração no martelo, e a remoção do limitador de curso não gerou um problema na disparadora?

[@sub12airgunners]

No no problem with the trigger

[@monk1john]

Well in enjoyed that

[@sub12airgunners]

Good to hear. Thanks for watching.

[@SHShahab]

Excellent video as ever ! Just 1 question : where is the breath hole of the main block on this gun? actually I mean where the breath hole on the reg casing ends to ?

[@dgg2412]

About time we saw this in parts Jake😉

[@sub12airgunners]

Cheers mate, a whole 3 weeks before it came apart! Took us long enough. Thanks for watching.

[@mxtone]

Great video as always. Just bought a Uragan 2 which is fantastic and this video will be a great help in the future

[@sub12airgunners]

Cheers, they are a real nice rifle. Thanks for watching

[@jasongeorge3115]

Fantastic video, really helped me. Question though, there is an extra o ring in my valve stem that's not on yours? The o ring appears to serve no purpose, it sits on the valve stem forward of the sealing face, below the transfer port and there are no locating grooves for it. My worry is that this should live in the main body as there is no sealing o ring between the valve stem and the body on the hammer side. Have you seen this before?

[@brianfurth2839]

Great video as usual, would you have any idea the size of the .25cal breech seal o ring please? cant find it anywhere. Many Thanks.

[@sub12airgunners]

6.5 x 1.5 at a guess i don't know for sure not been in a .25 👍

[@Sae-fu5ch]

Yet again a truly awesome video which is invaluable to owners of said rifle👏 these boys share there work 👌

[@sub12airgunners]

Thanks mate

[@fabiofernandestirodepressa3847]

Olá. Qual a diferença entre a Uragan 2 e a Vulcam3?

[@78primdahl]

How about the uragan. Prince? Is it a pain to get to the regulator because of the twin bottle adapter or is just as simple as the standard uragan?

[@sub12airgunners]

not had a look at the prince yet but it should be the same as the standard one

[@ALIHADI-jk3ex]

Hello, I want to ask about the internal valve of the gun. Has the spring been changed or modified, or is this the original valve from the factory?

[@sub12airgunners]

it's the standard valve 😁😁

[@ALIHADI-jk3ex]

@@sub12airgunners can you give me your number please ?

[@shadowshooter4224]

Amazing video, really usefull. I just bought Uragan 2, but i need to know, what is the manometer thread size? thank you bro.👍👍

[@lisawood516]

Brilliant video., interesting valve set up!. 😊😊

[@sonan7216]

Good morning, I have an rti prophet 2 that came out about 5 months ago, it has an assisted valve that does not seem to be a great success, with a few thousand shots it started to leak through the valve, I sent it to the dealer and they installed a one-way valve of different air ensuring a better result, if I had the opportunity to do a rewiew assembling and disassembling I would appreciate your opinions and advice, greetings and thanks.

[@ilijaristeski58699]

Any idea how to repair valve leak on Uragan 2 in 30cal ? I change all the O-rings on the valve and the valve housing but i still have the same problem

[@jfkenpoman1]

Great video. Is there any chance you can do a disassembly video for the AGT vixen short. I have the .22 version and it also make quite a noise when firing. Keep up the good work Kind regards Jon in uk

[@sub12airgunners]

Cheers, we don't have one at the moment but if we borrow one we will get a video done. Thanks for watching.

[@truthspeaker2062]

Did you change cha valve ? Because uragan 2 valve comes with one O ring while uragan 1 comes with 2 o rings in the valve

[@BikeMole]

The one in the video is the older original valve. There is now a white Delrin one, which seals better and is available as an upgrade (still 1 o-ring though)

[@iankay7481]

After some advice if possible , I need to replace my pressure gauge on a mk1 uragan , would you know which size gauge and type of thread is needed in case I can't source an original agt one and have to go aftermarket , thanks

[@MasonStormSunny]

Sorry, is the sealing disk made of peek?

[@sub12airgunners]

Yes peek 😀

[@MrIliff]

I wonder how much difference it is to the original Uragan the previous model. Great video. Build of these airguns looks superb. What do you think? Ah ha you said at the end!

[@sub12airgunners]

Not had a Uragan 1 before so I don't really know, but from the looks of it the new one is just an improved version of the original. Thanks for watching.

[@bakerg21]

The new one is a total redesign. The only real similarity (apart from its overall AGT DNA) is it's outward appearance with the stock on.

[@shahriar907]

Could you please tell me the (red metal one) hex screw driver brand name?

[@sub12airgunners]

hi they are EDS hex drivers 😀

[@jindoisland]

Love your videos! If you ever get your hands on a BRK Ghost, it would be great to see it apart and get your thoughts on it. Thanks

[@sub12airgunners]

The Ghost is on the list and we will be getting one

[@yullex3338]

Hi all, I bought my Uragan2 6.35 barrel 700, they advised me to lap the barrel, can it give optimal results, or can it give negative results? thanks whoever answers me

[@OriginalMarkyBoy]

👍🏽👍🏽👍🏽 Thanks Jake 😎✌🏼

[@sub12airgunners]

No problems thanks for watching

[@joelowery8827]

I don’t know why every air gunner out there is not subscribed to your channel.

[@sub12airgunners]

That would be nice 😀 thanks for watching glad you like them

[@lukeatkinson30]

Fantastic video as always. Maybe you should consider designing your own air gun

[@sub12airgunners]

Thanks, we will get round to it one day, its certainly something we will do, but its just finding the time at the moment. Thanks for watching

[@uragan3471]

Hello, please make a clip about making a silencer for the uragan gun, thank you

[@sub12airgunners]

we have done one now 😁 thanks for watching

[@LIMITLESS144]

How to transfer the air if the bottle is empty? 😢 I cant doing that, because the air always coming out in the back of valve. 😢

[@BikeMole]

Stand upright with barrel in air so gravity assists the valve closing. After checking unloaded, place thumb tightly over barrel to seal it and pump away. Once the pressure build in the barrel it pushes the valve closed and you're good to go. AGT now include a red barrel cap for this reason

[@TurkishTinkerer]

The mini laser

[@donspiteri6814]

Awesome Luke.

[@sspider9523]

Airmaks krait assembly please

[@sub12airgunners]

We are hoping to do one soon 😁

[@zan6169]

Приветствую. Интересный аппарат. Всех благ.

[@sub12airgunners]

Thanks for watching.

[@ok-uo8ht]

Disadvantages of the gun The sound of the hammer is very annoying while shooting, and also the air coming out of the bolt during shooting

[@jeffhello1444]

Nice one 😁

[@znate123]

زر الأمان لايعمل ما الحل

[@sub12airgunners]

thanks for watching 👍

[@tikhonov65]

да не автомат калашникова, миллион болтов и винтов..

[@sub12airgunners]

😂