AGT Uragan 2 reassembly

Hi guys final video here today on the AGT uragan 2 and in this one we rebuild the rifle and take a little overview of it having owned the rifle for a couple of months now. Thanks for watching.

[@leec8592]

A great series of videos on an excellent little air rifle. Thanks for sharing 👍

[@sub12airgunners]

Thanks Lee, it's a great gun

[@Tim_Bassett]

Nice to see torx making an appearance. Good clear video, and a lovely little pup. great work.

[@sub12airgunners]

Thanks Tim, we will try to get some Dremel work in soon 😂

[@monk1john]

Well done you make it look so easy looking forward to your next project 👍🏻

[@sub12airgunners]

Thank you! Cheers!

[@casperboo5465]

Really enjoyed it Jeff, and always a great watch mate, thanks for sharing with us Cheers 👌👌👌👍👍👍👍

[@sub12airgunners]

Glad you enjoyed it

[@rogerparr7710]

Such refinements you make to any make of gun Jeff they should be all paying you for your work. Top job as always.

[@sub12airgunners]

Cheers, just little things to make the rifle a little nicer. Thanks for watching.

[@eddienuttall2485]

Great video Jeff, could watch all day. Definitely an improvement from the factory model.👍👍

[@sub12airgunners]

Thanks 👍

[@bashm5767]

Great informative video and a great looking rifle, my favourite Mod is got to be the shroud👌🏼

[@sub12airgunners]

Yes the shroud is nice, thanks for watching 😀

[@darrenm7964]

You always do such a great job that looks such a beautiful gun now, shame you don't sell parts you make or even do a tuning service just for your subscribers, thanks Jeff can wait for the next video!

[@sub12airgunners]

Thanks for watching 😀

[@Sae-fu5ch]

Superb!!! 👏

[@sub12airgunners]

Thanks much appreciated. Thanks for watching

[@Premierslugs]

Another excellent very informative video , I have had a Uragan but the mk1 and was very impressed by it , the gun is way better than some offerings available, fx could do with looking how a reg should be made for sure

[@sub12airgunners]

thank you, they are very good and it is a shame not all guns are as good out of the box

[@Premierslugs]

@@sub12airgunners the Raw is also a fantastic gun from the get go , hopefully the Leshiy 2 will be too

[@lisawood516]

Really good videos. I do think it looks better with the longer bottle and shroud. 👌👌👌👌

[@sub12airgunners]

Thank you! Cheers!

[@chrisfigueroa3361]

Awesome video it's a great looking compact air gun thanks for sharing bsafe buddy 👍

[@sub12airgunners]

thank you it is a great little gun

[@chrisfigueroa3361]

@@sub12airgunners with the mods you put into it made it an awesome gun I mean you truly are a master at that lathe but man I have a lathe at work where I work at it's a big one like the one you have but I have the slightest clue how to use it lol I think I misspelled lathe lol anyways you know what I mean ty 😊

[@rafarodmir7492]

Thank you for the thorough videos!!! I really like this compact gun, though still not available in Spain. My only dislike is going blind on the reg pressure, but if it comes well tuned from the factory it shouldn’t be a major issue.

[@sub12airgunners]

Thanks for watching

[@three-phase562]

This has been a very enjoyable series to follow with great detailed work involved. Thanks very much for producing it. It looks like you had the old style Shadowfoam, that is quite soft and I have found that it gets contaminated after a while. They now make a different type of SHadowfoam now that is much better to use. Shadowfoam also have their own KZbin channel and do collaborations from time to time, so may be an idea for you.

[@sub12airgunners]

Hi yes we have had the foam for some time now waiting for something to use it on 😀

[@andrerocha351]

Muito bom , parabéns!!!

[@sub12airgunners]

Thank you

[@jeffhello1444]

Nice 👍👍

[@sub12airgunners]

thanks

[@jbhk7977]

I would like to see you disassemble and reassemble the Skout Epoch, this appears to be revolutionary and a delta wolf on steroids. I pre ordered one in .30 and hope to get it in a few weeks.

[@sub12airgunners]

I would love to get my nose in one, been keeping an eye on them for a while now

[@PaulSmith-jr1qe]

Can you fit the FX bottle valve in the AGT bottle if you want to keep the original bottle but with a self sealing valve.

[@roypalmer5770]

Hi Jeff Great video again. I have the U2 so found this video especially informative. Are the O-ring sizes in this video measured internally or externally and could you recommend a supplier to get them from. I have watched all your videos and love the way you take your time and explain all the little details especially for those of us with little or no engineering experience. Looking forward to future content and keep up the great work. All the best.

[@sub12airgunners]

Hi they are internal sizes we use simply bearings for O Rings👍 thanks for watching glad you find them helpful

[@truthspeaker2062]

Does uragan 2 valve come with double o rings ? Or you changed the valve from uragan 1 ? . I think uragan 2 valve comes with only one o ring in the valve head and another o ring inside valve house.

[@WendiAtiq]

How long is this barrel?

[@gordonmoore4356]

Hi Jeff, I’m in the process of rebuilding the reg on mine. Is the nylon reg seal a flat surface or like mine a cupped profile with a small nylon pin in the centre ?

[@sub12airgunners]

the seal between the reg and the adjuster screw should be flat and very smooth 👍

[@gordonmoore4356]

@@sub12airgunners Thanks Jeff, looks like this one is way past its prime then. I engineer pal Jerry May is going to make a new smooth one from delrin

[@markjohnson2166]

Did the Sub12 one come with a transfer port restrictor ?

[@sub12airgunners]

Yes our one did 👍

[@stuartgray3743]

Great video, I’m just looking for some help as I ran mine out of air today and now can’t seem to get it to hold any air. It’s just leaking out of the back end of the barrel. Any help would be greatly appreciated.👍🏼

[@sub12airgunners]

Hi these are a pain to fill from empty, you need to cock the gun and give it a good blast of air and sometimes dry firing as you are filling helps and even putting you finger over the end of the barrel, you are just trying to get enough air in them to force the valve closed

[@stuartgray3743]

@@sub12airgunners yes I have a small compressor so I’m just trying to get enough air in with the bottle to seal it and then I can carry on filling it with the compressor but not having any joy 👍🏼

[@stuartgray3743]

@@sub12airgunners just trying to get enough air in to seal it, and then I can fill the rest with my little compressor

[@johnmasoncooper9725]

So what does the ring stack do what's there purpose.

[@sub12airgunners]

The belleville washers are part of the reg, the thickness or strength of the washers effects reg pressure. Thanks for watching.

[@OCDfish]

Great watch again and very interesting g to see how it’s all put together. Will you be selling the rifle now? I’d be interested if you are please!

[@sub12airgunners]

someone at the range has his name on it but if he changes his mind i will give you a shout 😀

[@OCDfish]

@@sub12airgunners ok no problem, don’t forget about me please!

[@armanaf8858]

My URAGAN 2 leaks air slowly from barrel , could you help to me fix it?

[@sub12airgunners]

If it leaks from the barrel it is the firing valve 👍

[@markjohnson2166]

Nice video, very informative. I know your not sponsored but any plans to review, assemble, dissasemble the Airmaks Krait, looks interesting ?

[@sub12airgunners]

We are hoping to very very soon keep watching 😁

[@markjohnson2166]

@@sub12airgunners - Awesome :)

[@rafarodmir7492]

For certain @sub12airgunners will come up with a better regulator for that gun 😊