Excellent video. There is a lot in it in a very short time. Great. Will try. I have my first Blynk test succesfully loaded yesterday. This will help me to progress further. Thanks
@AhmadLogs Жыл бұрын
thanks
@davydbar2 жыл бұрын
It is an excellent project, very complete! and above all by adding the IR it collaborates to not depend on the PC or the mobile. It was what I needed. Thank you very much brother!! My board for now only has 4 relays, a dht , and last night I added a PWM control to drive some RGB strips. I have the ultrasonic sensor which I will be adding soon. Thanks again. Greetings from Santa Fe Argentina!!
@AhmadLogs2 жыл бұрын
thank you dear. So nice of you
@vivekananthan-sw8kq4 ай бұрын
How you are powering the esp through vin pin or cable also how much power you are supplying then what is the source of power like laptop or lithium battery
@warrenscorner2 жыл бұрын
Great project Ahmad! I never thought of using an ultrasonic sensor for water level. That will work perfectly for me. I also need a sensor for checking water leakage such as under a sink. Thank you.
@AhmadLogs2 жыл бұрын
Great 👍
@matthiash.4542 жыл бұрын
Super project 👍🏼 Quick question: how do you do that with the animated connection and wiring diagram 🤔
@muhammadnor41352 жыл бұрын
I really like your very useful project, thank you.!
@AhmadLogs2 жыл бұрын
Glad you like it!
@AAdnaanmtl2 жыл бұрын
Excellent project sir thanks for sharing such a nice work 😊
@AhmadLogs2 жыл бұрын
It's my pleasure
@lotfibouchiba1537 Жыл бұрын
merci beaucoup BOSS
@mrinmoyshyam26145 ай бұрын
Sir, can you please upload the code? It will be very helpful for us beginners to understand.
@GBENGAAJIBOLA-wg4ke Жыл бұрын
Hello Mr Ahmad! Great project here. I just uploaded the IR code into my ESP32 but the serial monitor just keep generating something else and never responded to the presing of the remote. I'm using Bush TV remote or must it be that type (LED RGB) of remote?
@AhmadLogs Жыл бұрын
Did you follow the suggestions I provided?
@teachtechnorobotics Жыл бұрын
@@AhmadLogs yes I did to the letter
@user-cz4lr6km1o7 ай бұрын
how would you able to add more datastreams in blynk console
@yousaftoki15992 жыл бұрын
Awesome project sir..
@AhmadLogs2 жыл бұрын
Thank you! Cheers!
@omkarbansode6305 Жыл бұрын
Thankyou Sir for your Video
@AhmadLogs Жыл бұрын
Most welcome
@rampage_xdit2 жыл бұрын
Thank you and good job. Ithink if we dont have any wi fi how we use sim800L for internet?
@AhmadLogs2 жыл бұрын
yes, it is possible
@rampage_xdit2 жыл бұрын
@@AhmadLogs may you tell me how ?regards
@AhmadLogs2 жыл бұрын
@@rampage_xdit lot of changes will be required in the code. I don't know how. but it is possible it required some time
@diaryiklanlucudiarylancu83672 жыл бұрын
Nice project sir.. 👍👍👍
@AhmadLogs2 жыл бұрын
Thanks
@samimayoubi8403 Жыл бұрын
Hello, I made the whole project but it has some problem after some minutes it starts turning on and off the relays itself, and some sensors like pir and ultrasonic doesnt work, what can be the problems . Looking forward to your reply Thank you for your amazing projects
@bhaskarsolanki7266 Жыл бұрын
Bro plz help can it be done by mobile phone using arduino droide
@AhmadLogs Жыл бұрын
Interference from other devices or electrical noise can cause issues with your project. Make sure that your project is shielded from interference, and try moving it to a different location if possible. make solid connection with quality wires
@eerrfanshayyestehh2069 Жыл бұрын
Good 🙋♂️👍👍👍👍👍
@AhmadLogs Жыл бұрын
thanks
@user-cz4lr6km1o7 ай бұрын
in my blynk console i am unable to add more datastreams. it is asking upgraded version. can uh provide me alternate method or any cracked version of blynk
@heilmannsvej Жыл бұрын
how about adding a gsm 800l. there isnt any wifi where i could use this great projekt.
@AhmadLogs Жыл бұрын
great idea
@shakerileiwat43412 жыл бұрын
Great project ♥♥♥
@AhmadLogs2 жыл бұрын
thanks
@bhaskarsolanki7266 Жыл бұрын
Sir plz help missing binary number before token "(" ye error bta raha hai kya karu
@ameenenterprise58692 жыл бұрын
ماشاء اللہ
@AhmadLogs2 жыл бұрын
thanks
@GBENGAAJIBOLA-wg4ke Жыл бұрын
Good day, I was able to install version 2.0.9 and when i uploaded the "get ir remote Hex" but it was giving me the direct Number I press from 1-4, I got 1,2,3 and 4 directly and rspectively,is it supposed to be so?
@AhmadLogs Жыл бұрын
no no its not bad. it is just fine. you just use the same in the code.
@amirqane52702 жыл бұрын
very good
@AhmadLogs2 жыл бұрын
Thank you! Cheers!
@candidamayeondo19538 ай бұрын
Hello sir i can use esp32 no core
@RajuBhai-ph9fj4 ай бұрын
hi bro
@mostafa-ke8kk2 жыл бұрын
Top ideia 👏
@AhmadLogs2 жыл бұрын
thanks
@diaryiklanlucudiarylancu83672 жыл бұрын
Can the sensor activate the relay, Sir for automatic and manual swicth,?🙏
@AhmadLogs2 жыл бұрын
no sensor will activate any relay. but you can activate a relay by making change in the code.
@diaryiklanlucudiarylancu83672 жыл бұрын
I'am beginner sir..i canot change the code.
@AhmadLogs2 жыл бұрын
@@diaryiklanlucudiarylancu8367 will try soon
@fastseva Жыл бұрын
sir ... ESP-32 face reconization attandance systerm ... with googleseet and second project connct with web server ... mysqul detabce banaiye....
@AhmadLogs Жыл бұрын
soon
@amirtelecom68982 жыл бұрын
Hi sir Notifications is free? Thanks
@AhmadLogs2 жыл бұрын
Yes 100% free
@sagar437 Жыл бұрын
What library you used
@AhmadLogs Жыл бұрын
for what?
@blackfadhil87712 ай бұрын
@@AhmadLogs for IRremote library can you send link you use in this project?
@bhaskarsolanki7266 Жыл бұрын
Bro how can i upload this program by using mobile phone plz help
@AhmadLogs Жыл бұрын
not sure
@fgkopfgkop8731 Жыл бұрын
Shall i upload the same code to esp8266 board?
@AhmadLogs Жыл бұрын
no
@ardhrubo8455 Жыл бұрын
working with esp 8266?
@AhmadLogs Жыл бұрын
not sure
@balbirsinghheer13702 жыл бұрын
Hi sir how can we upload these live data to our website live please help sir
@balbirsinghheer13702 жыл бұрын
Like publically on our website
@AhmadLogs2 жыл бұрын
to send live data to free website is not as easy. you need to buy premium plan for website to do live
@balbirsinghheer13702 жыл бұрын
Sir like getting widget data from blynk and live uploading to our website
@AhmadLogs2 жыл бұрын
@@balbirsinghheer1370 you can upload it to Firebase. What is the reason behind this? why you want it?
@balbirsinghheer13702 жыл бұрын
Sir actually I'm making my weather station for my village so i have to upload dht11 sensor readings to my own website and with if condition like when temperature is over 30C then readings should display high temperature on my own website so people can visit my website and check temperature (no weather station is currently in our village) so please help me sir i will be very thankful to you
@vcooltm87692 жыл бұрын
add a nicer manual button, sir
@AhmadLogs2 жыл бұрын
Noted
@vcooltm8769 Жыл бұрын
@@AhmadLogs use wifi manager sir
@dellibabu2601 Жыл бұрын
In file included from c:\Users\User\Documents\Arduino\libraries\IRremote\src/IRremote.hpp:273:0, from c:\Users\User\Documents\Arduino\libraries\IRremote\src/IRremote.h:10, from F:\WIFI WATER LEVEL\ALL IN ONE SMART HOME\ALL_IN_ONE\ALL_IN_ONE.ino:115: c:\Users\User\Documents\Arduino\libraries\IRremote\src/private/IRTimer.hpp:1373:50: error: missing binary operator before token "(" #if ESP_ARDUINO_VERSION < ESP_ARDUINO_VERSION_VAL(2, 0, 2) ^ exit status 1 Compilation error: exit status 1 error showing can you help me pls
@AhmadLogs Жыл бұрын
just update your ir_remote library
@Techno_lazy001 Жыл бұрын
It's still not working brother
@AhmadLogs Жыл бұрын
@@Techno_lazy001 yes
@GBENGAAJIBOLA-wg4ke Жыл бұрын
It kept on giving me these: "rst:0x10 (RTCWDT_RTC_RESET),boot:0x33 (SPI_FAST_FLASH_BOOT) flash read err, 1000 ets_main.c 371 ets Jun 8 2016 00:22:57 rst:0x10 (RTCWDT_RTC_RESET),boot:0x33 (SPI_FAST_FLASH_BOOT) flash read err, 1000 ets_main.c 371 ets Jun 8 2016 00:22:57 rst:0x10 (RTCWDT_RTC_RESET),boot:0x33 (SPI_FAST_FLASH_BOOT) flash read err, 1000 ets_main.c 371 ets Jun 8 2016 00:22:57"
@AhmadLogs Жыл бұрын
The error message you are encountering indicates that your ESP32 board is experiencing a reset due to the RTC watchdog timer (RTCWDT). This typically happens when the watchdog timer is not refreshed within its specified timeout period. Here are a few steps you can try to troubleshoot and resolve the issue: 1. Verify the connections: Double-check the wiring connections between the ESP32 board and any peripheral devices or sensors. Ensure that all connections are secure and properly configured. 2. Update the firmware: Make sure you have the latest firmware installed on your ESP32 board. Check the official documentation or the manufacturer's website for any firmware updates or bug fixes that may address the issue you're facing.
@teachtechnorobotics Жыл бұрын
I am not very excellent with embedded systems. I'm still a beginner and an enthusiast. These steps are somewhat very technical to understand fully. But I think I installed the latest ESP32 board (2.0.6 I think)
@AhmadLogs Жыл бұрын
@@teachtechnorobotics It is fine if you are using the version 2.0.6. you just flash you esp32.