AI Prime 16HD Program Build Basics & Tips myAI App Hydra Aquaillumination Reef LED Light Coral

[@Platano_reyes]

Best all around tutorial I’ve seen. Thank you so much for this!

[@TheSparkysdog]

Thank you, a very comprehensive guide, just what I needed 👍👍

[@andyproctor696]

What a great video. Thank you!

[@1969ajq]

great tutorial

[@mistymeadows1680]

Awesome video! I will be switching to your program. Thanks for the info

[@saltypops4276]

If you are switching a tank with coral in it, I strongly suggest running acclimation mode.

[@paulhumphrey9474]

This is great. Your corals look amazing. I am thinking about this and how to transition my schedule to mimic yours?

[@saltypops4276]

If you are switching a tank with coral in it, I strongly suggest running acclimation mode.

[@dennfox1464]

Algae on the glass every day (Reef tank) to much light? or should I reduce the hrs on? Thnx

[@saltypops4276]

Rarely is it a light issue. What are your phosphates at?

[@dooros543]

Hi - great video! I know you mentioned that you built in your own sunrise and sunset and not using the auto function. What about the Moonlight function - can that be added to your preset by enabling it? Also, any other way to get your preset? Believe it or not - im not on Facebook. I know, crazy right. Thanks!

[@saltypops4276]

Moonlight can absolutely be added without any effect on the existing program. If you get me your email address I will email it to you.

[@dooros543]

Sorry - do you have the About page to send a private message?

[@saltypops4276]

@@dooros543I do not have an about page. Sorry.

[@AncientInsightsUniverseWithin]

I’m using your schedule with 3 AI Blades in a 2:1 Grow to Glow ratio. Can you help me adjust to achieve a deeper blue during the blue phase?

[@saltypops4276]

The quick answer is, you need to increase the intensity of the Blue OR decrease the intensity of the others OR a combination of both. Royal Blue appears brighter than Blue. See bulb ratio below compare to 16HD: Prime 16 HD - RB : Violet + UV is 2:1 Your setup has 3:1 which will make the overall blue much brighter. Prime 16 HD - B : Violet + UV is 2:1 Your setup is 1:1. So the Blue LEDs that produce the darker blue are less prevalent in the Blades vs Prime, which is why you are getting a darker blue with the Salty Pops program. A little manual adjusting and you should be set.

[@imandori6354]

Hi.this preset is good for my 25G (Cube) tank with mix corals?

[@saltypops4276]

Yes it is. I have it running in a 15 gallon and others have put it on tanks as small as 13.5 gallons.

[@hsmsummerdadon8035]

I have a 60 gallon tank and i mainly only want to grow lps coral i am wondering if this will be fine for me.

[@saltypops4276]

This schedule works great for LPS!

[@KentuckyHillbilly]

Seems good for my 2 hydra 32 lights my par meter shows 80 par on sand bed about 140 to 130 par middle of tank and about 200 close to the surface.. they are also 15 inches away from the water surface btw Best light setup I've ever seen.

[@jacklawer6389]

Your app looks different from mine, i dont have a done button or a minus button.? My app frustrates me, I set my times, for example light comes on at 9 am. After i program it the light comes on and stays on when i never programed it for that time....

[@saltypops4276]

Make sure your device updates are current. Then resave the program and select it again. I use the app through iPhone, are you using a different platform?

[@jacklawer6389]

@saltypops4276 Have to check on how to do a update, i can't see where to do that ?

[@jacklawer6389]

@saltypops4276 I use the app on my android

[@saltypops4276]

To check for an update. Click on settings. Choose the device and then choose update. Pretty easy. I don’t have android and have never used the app on android but am very surprised there is no minus button. Send me a screen shot and I’ll figure it out

[@jacklawer6389]

@saltypops4276 Ya, there is no update, button ?

[@CaydenVesper]

Can you send me a link to your latest preset?

[@saltypops4276]

Hello. I have it saved in the files section of the FaceBook group AI Prime/Hydra Reef Group. It is called Salty Pops.

[@coolguy1995able]

Hello Salty Would this preset be good for my tank ? My tank is 28 inches x 18 inches x 18 inches with one ai prime 16 hd placed 11 inches off the water. Tank has bubble tip anemones , mushrooms, and zoa. Tank you. @saltypops4276

[@saltypops4276]

@@coolguy1995able hello. Yes sir this will work great. The bubble tip anemone tank video I have is a 15 gallon fluval flex with 1 ai prime with no modifications to the schedule and they are doing awesome!

[@coolguy1995able]

@@saltypops4276thank you for replying to me. I have reduced the duration to 10hrs, is that okay ?

[@saltypops4276]

@@coolguy1995able absolutely. Reducing the duration is just fine.

[@jacklawer6389]

I have this light, pisses me off, it's like it has a mind of ts own...

[@marcosg1393]

Hi love the video just what I was looking for thanks (: And can you send me your program please I got a email or if you can send me a link to your Facebook thanks let me know (: Keep up with the videos 🙌

[@saltypops4276]

Hello. I can send it via email. Or I have it saved in the files section of the FaceBook group AI Prime/Hydra Reef Group. It is called Salty Pops. Or create it in just 8 points.