Setup and use the 3 gallon Mastercraft Air Compressor. 058-1290-6 General overview, what to expect and what will work for you.. link to additional info. unbox. • Mastercraft Air Compre...
Пікірлер: 37
@V.Hansen.3 жыл бұрын
Thank you for starting at the beginning and not skipping all the stuff a novice wouldn’t know. You didn’t show me what I’m looking for which is how to set up my first pneumatic tool, but it will help someone with their first step.
@kd_enterprise34043 жыл бұрын
Thanks for the comment and checking out vid..
@arvindsrinivas14564 жыл бұрын
Only video that I could find where all of the steps were explained in detail. Thanks for sharing.
@kd_enterprise34044 жыл бұрын
Arvind Srinivas thanks, hope you have a great day... thanks for watching.
@gregoryjamesboyce4 жыл бұрын
Had this compressor sitting around for a few years without needing it or knowing how it worked. Today I needed it. Watched this video, went to CT and got the same accessory kit (on sale $21) and the tire fill accessory (on sale 8.99). Now tires are fine and dandy! Many thanks to you!!!
@kd_enterprise34044 жыл бұрын
Gregory Boyce welcome! Thanks for watching and the comment..
@wizzyb9761 Жыл бұрын
Thank you. This is exactly what I needed to see - just bought one and haven't ever used one before :)
@kd_enterprise3404 Жыл бұрын
Perfect… thanks…
@sairfan065 жыл бұрын
very well explained everything, thanks for the video
@kd_enterprise34045 жыл бұрын
Sairfan thanks, you are welcome..
@nathanarmstrong66303 жыл бұрын
Excellent video!
@kd_enterprise34043 жыл бұрын
Thanks, glad it was helpful... have a great day!
@TheChosen14063 жыл бұрын
🙏🏾🙏🏾🙏🏾 this video was a big help.
@kd_enterprise34043 жыл бұрын
Thanks for watching... have a great day!
@lilfawn833 жыл бұрын
Thanks so much for your video,. It really helped me a lot.. :)
@kd_enterprise34043 жыл бұрын
Welcome! Glad it helped and thanks for watching.......
@rafy113 жыл бұрын
Thanks for this!
@kd_enterprise34043 жыл бұрын
Welcome! Have a good day..
@rain-457111 ай бұрын
I hav the same compressor for some reason air pressure won’t go above 25 (PSI) I believe. I’ve tried all I could but it’s not working pls advise what can I do to make it work 😩😩
@kd_enterprise340411 ай бұрын
The only things to check would be the drain plug on bottom of tank, verify closed. (Clockwise till stops)Make sure to turn the pressure regulator clockwise till it stops (black knob in front of the pressure gauges. That's all unless the hose is really leaking bad. If all that checks out it and still does not work it will require repaires.
@olenaerhardt77252 жыл бұрын
Can you seat a tire (R16 for a passenger car) bead w/this compressor and what is its weight? Thank you for the informative film.
@kd_enterprise34042 жыл бұрын
Yes I theory, I’ve done it but the beads have to really lined up, it’s an air volume issue not pressure… normally u need a larger capacity tank, so it’s hit and miss… it’s weight is about 15 pounds guessing.
@olenaerhardt77252 жыл бұрын
@@kd_enterprise3404 Thank you. I'm trying to use a Bead Seater (8Ga) and a very small compressor (1Ga). I tried yesterday 50 psi and 60 psi on that BS w/no result. Actually there is no slit between the tire and the wheel. Should it be a visible slit where you aim the BS nose, or you just point at the border of the rim and tire and the air finds its way after discharge?
@kd_enterprise34042 жыл бұрын
@@olenaerhardt7725 I’d try filling through the valve stem. 50 psi is unlikely to achieve what u r doing….
@olenaerhardt77252 жыл бұрын
@@kd_enterprise3404 You mean to aim the BS nose to the valve stem (w/Schrader Valve removed)? Or you mean just to add air via the valve stem, since no slit? There was a slit before and I could move the tire up and down, there was a slit, but now it is colder and the tire is sitting sturdy on the rim, but when I tried to add air, the pressure didn't go up more than 9 psi.
@kd_enterprise34042 жыл бұрын
@@olenaerhardt7725 so the only method I have used is via the valve stem with the needle valve installed just like adding air normally, guy I know has a proper tire machine and that is how he does it also but of course he has a big compressor…look on KZbin for guys using a ratchet strap to seat a tire, that might be helpful. Never tried it but it makes sense.
@Dj-V73 Жыл бұрын
Hi there, do I need to add oil to this air compressor model or it's oil free? Thank you and great video.
@kd_enterprise3404 Жыл бұрын
Oil free I believe, don’t see anywhere to add, plus I had a smaller version that I disassembled and basically it’s a piston with a rubber ring… I believe I damaged my old one because I fired it up at -30 to fill a car tire and the rubber ring was probably hard as a rock and disintegrated… so hint… don’t run below -10c or or 14f max….. my old school compressor is pretty obvious it requires oil.. fyi.
@Dj-V73 Жыл бұрын
@@kd_enterprise3404 Thank you very much for your quick reply and helpful tips, much appreciated. Take Care, cheers
@uncleknife98873 жыл бұрын
This dude is a real genius! 🔪🐵
@kmac00013 жыл бұрын
Wait...are you saying END or AND?
@kd_enterprise34043 жыл бұрын
Do I have an accent? Could be that
@herlemaggard693 жыл бұрын
Sounded like AvE at first lmao
@JwowDickens2 жыл бұрын
bro why can't i find any videos of it being used all this useless information i just wanna see it blow stuff
@kd_enterprise34042 жыл бұрын
What fun is that? Get it set up and experience it for yourself… I don’t want to ruin your movie bro and the fun…