Air intake manifold flame preheater. Perkins 4.108 diesel engine. Pre-Heater Glow Plug. Cold start

  Рет қаралды 15,138

BarcelonaAustinA35

BarcelonaAustinA35

Күн бұрын

Air intake heater, also known as a grid or manifold heaters are used to pre-heat the combustion air to the required temperature to aid cold starting. Used as an alternative to glow plugs to provide quick starting in cold weather. Also, can be used to reduce white smoke (cold emissions), engine wear and battery/fuel consumption during start-up.

Пікірлер: 12
@videoscortos.9970
@videoscortos.9970 2 жыл бұрын
Acá en Argentina para arrancar el Perkin usábamos un hisopo con gasoil lo prendimos fuego y con eso y un poco de suerte arrancaba, estoy en una zona de mucho frío, Patagonia Bariloche.
@DaveBruce-oq9ys
@DaveBruce-oq9ys 8 ай бұрын
That's normal it need that flame to warm up
@dennisfriborg4803
@dennisfriborg4803 2 жыл бұрын
Any link to where to buy this flame heater? I think mine is not working anymore :(
@BarcelonaAustinA35
@BarcelonaAustinA35 2 жыл бұрын
Hi, I’d buy it from parts4engines UK, original spares: www.parts4engines.com/perkins-4-108-glowplug-thermostart/ However, this is a 12V version. In military vehicles voltage was 24v Regards
@dennisfriborg4803
@dennisfriborg4803 2 жыл бұрын
@@BarcelonaAustinA35 got a new one from a tractor supplier near by :) Do you know where I must take the power from, so it stops heating when the engine is running? And what size cable is recommended?
@FUNKINETIK
@FUNKINETIK Жыл бұрын
@@dennisfriborg4803 hi, just wondering if you solved your igniter plug fitting. . I need to fit one to. 4.154 Perkins in a Bedford van.
@dennisfriborg4803
@dennisfriborg4803 Жыл бұрын
@@FUNKINETIK sorry, I just replaced it with the old one. But it do not heat at all. I did not have the time to solve it. Pls let me know if you can figure it out :)
@FUNKINETIK
@FUNKINETIK Жыл бұрын
@@dennisfriborg4803 hi Dennis, thanks for replying. I’ve never had the cold start in operation so starting from scratch. I’ve got an igniter plug fitted ready to the air intake. I think I’ve figured out how the little fuel reservoir I’ve bought needs to be ‘plumbed’ in, off the fuel leak off return. So got to find out how the electrics to the igniter is wired. I’m about to ask on the Bedford CF.org forum for some help, so will let you know when I get more info.
@johnrooney2496
@johnrooney2496 Жыл бұрын
What a bag of crap they were ,wouldn't pull you out of bed
@BarcelonaAustinA35
@BarcelonaAustinA35 Жыл бұрын
Hahashaha absolutely
Demonstrating a "Thermostart" Intake Manifold Pre-Heater
2:49
Farmall Doctor
Рет қаралды 26 М.
Perkins Diesel 4-108 Update | SV Ramble On
12:33
SV Ramble On
Рет қаралды 4,2 М.
World‘s Strongest Man VS Apple
01:00
Browney
Рет қаралды 68 МЛН
Life hack 😂 Watermelon magic box! #shorts by Leisi Crazy
00:17
Leisi Crazy
Рет қаралды 80 МЛН
Kluster Duo #настольныеигры #boardgames #игры #games #настолки #настольные_игры
00:47
VAMPIRE DESTROYED GIRL???? 😱
00:56
INO
Рет қаралды 7 МЛН
Perkins 4.108 - Cold Start - Fire Heater
2:46
Second Growth Homes
Рет қаралды 6 М.
Perkins 4.108 diesel cold start with bad injector  8*C
1:36
Kolpomorto
Рет қаралды 4,7 М.
International 574 'Thermostart' heat plug
3:07
Wotjonsez
Рет қаралды 6 М.
Replacing the Rear Main Seal on a Sailboat (Perkins 4.108 Diesel)
19:59
Perkins 4108 - Rocker Cover oil seal
10:27
The Vintage Diesel Channel
Рет қаралды 330
Perkins 4-108 Rebuilt engine
6:15
Reggie Semidey
Рет қаралды 53 М.
Cold start old diesel dozer without starting fluid or glow plugs
6:12
World‘s Strongest Man VS Apple
01:00
Browney
Рет қаралды 68 МЛН