AIR LIFT PERFORMANCE Kit Bags Install Part 2 | NISSAN 370Z | INFINITI G37

What is up fam,
In this video we will be finishing up the airlift performance suspension install. In the previous video we ran the wiring and in this video we will install the bags.
Hope you find this useful!
370z owner
joker370z?igshi...
follow me on Instagram
chrizleyva...

[@jonathantran4563]

Thank you very much for your step by step install and all your tips definitely helped. Your videos were the only ones I found that was soo detailed 🤙

[@Chrizleyva]

Glad you found it useful 🙌🙌

[@RonnieMondragon]

It's video's like this that make it easier for clean installs on your own. Good looking out!

[@Chrizleyva]

🙌🙌🙌

[@controllerlife]

Bro this is so detailed TY

[@Chrizleyva]

🙌🙌

[@SoFresh786]

fam i love the whip, i was also planning on getting white deep dish rims and a purple wrap, didn't think there was one out there already

[@Chrizleyva]

Thank you 🙌 make sure to follow the owner on Instagram link in description

[@SoFresh786]

@@Chrizleyva ayy will do brotha !

[@goosunsafetyfirearmtrainin9561]

❤ thank you so much I do not own a Z I own an STI. I am doing my due diligence before embarking on this adventure constructive criticism used plastic panel poppers, solder and heat shrink wiring. This hit might feed I know you did the install two years ago keep up the great work

[@Chrizleyva]

Of course fam 🙌

[@emmanuel7917]

Very helpful

[@ltsky311]

Floors are indoors fyi. Ground is outside. =)

[@cybzisstalled212]

what size drill bits did u use for the rear bags? to drill into the top where the bag sits.

[@Chrizleyva]

I bought one of those dewalt drill kits and just kept going up until I got the perfect size. I think it was like 15 bucks

[@rfl35]

very good video man !

[@Chrizleyva]

🙌🙌

[@joshuasutton4043]

Nice z bro love mine too

[@spookydascary0076]

How did you install the rivet? And how can you remove it if you need to?

[@zy418r3]

We just did it! Really easy with the rivet hand tool. I believe the only way to remove it is to drill it out though!

[@mahadi5412]

Aye what’s name of that bolt u used to compress the rivet whenever u call it

[@Chrizleyva]

Tbh I don't think it has a name it's just a bolt and hex screw you can even do this with a regular bolt and over sized nut

[@user-dt9kq1xx7k]

Just tighten it up more and it wont leak

[@chris8gense_]

didn’t go over how to connect the wires to the compressor😔

[@whatapeek1494]

On the rear how did get the top hat off on the bag I’m having trouble

[@Chrizleyva]

Use a steel bar to hold it down that way you have leverage

[@mjmechanics]

Hey, I have bc coils and installed bags over coils it’s great but just want to know, How would I raise the rear from the shock? Do I have to worry about preload since I don’t have the collar on the spring? Basically I would just use the shock and adjust height correct?

[@Chrizleyva]

Right you just have to adjust the rear shock for ride hieght it doesn't have a spring for preload

[@MarcoReyes-sq6pz]

Hey where did you buy that purple wrap from?

[@Chrizleyva]

Cars not mine here the guys insta instagram.com/joker370z?igshid=y0343q15csyk

[@drippy5968]

can u send his insta again the link doesn’t work anymore

[@Sertiwyd]

What rims are on this car

[@Chrizleyva]

They are cosmis xt006r

[@Sertiwyd]

@@Chrizleyva what size are they

[@rm4228]

What exhaust is on the purple car

[@Chrizleyva]

I believe it's custom made with 4 resonators true dual

[@gha-houdyjeanbaptiste8454]

How much it’s gonna cost to do the air lifting???

[@Chrizleyva]

Depends the one you go with. Just to install is over 700 depending where you go

[@davidt964]

What size manifold ?

[@Chrizleyva]

Depends on the size lines you get if it's 3/8 it all has to be 3/8

[@Kayree_Ali]

Can you do my seventh generation Maxima please?😂😂😂

[@Chrizleyva]

I'm down if your local to az

[@luisbarrios4430]

Man that rivot thing ended up being loose even though I did the exact size drill bit that the manual said to do lol

[@shuzei8989]

how u manage to fix it

[@luisbarrios4430]

@@shuzei8989 it was good bro I just had never used one of those rivot ever so I wasn’t tightening it right but you gotta basically tighten it real hard and it will expand and grab on to the hole

[@shuzei8989]

@@luisbarrios4430 ah i see, i came to the situation that i accidental drilled the second layer 9/16 just like the first, which is why it was loose due to the borehole being too big 😭

[@shuzei8989]

@@luisbarrios4430 was considering steelstik

[@luisbarrios4430]

@@shuzei8989 damn so you drilled the top hole the same as the bottom hole? Makes me ask why they are not the same size to begin with 😂

[@aquilestejeda809]

Did you indent the shock tower? I

[@Chrizleyva]

What do you mean by that? Everything went in no issues

[@aquilestejeda809]

Airlift instructions note that modification for he front is to indent shock tower

[@felipediaz2104]

You dumb question do you need bags for both front and rear?

[@Chrizleyva]

Yeah each wheel needs a bag.It is possible to only do the front or even the rear if you want but it's better to do all 4.

[@shuzei8989]

yeah my rivet is loose cause the borehole is too big lmfao

[@Chrizleyva]

Awww damn that sucks.