Air Power Hammer Restoration 🔨💥 Small BUT Powerfull!!!

Visit simplisafe.com/blackbeard to get 30% off your system + a free HD camera! SimpliSafe is award-winning home security that keeps your home safe around the clock. It’s really reliable, easy to use, and there are no contracts.
Bought this small 13kg power hammer used and in working condition, but it has never been services, so it had many leaks on almost all gasket connections. This caused the power hammer to run poorly, with the ram not rectracting all the way into the head while idling. By taking it all apart I can be sure all parts are clean and properly oiled with non-detergent oil so the new paper gaskets can hold all the pressure inside the machine making it run better.
Luckily other than in desperate need of maintainance the power hammer was in very good shape, with almost no markings on the ram and no cracks or loose joints!
Between the few changes that are worth mentioning are 0.2mm shims behind wearing slides on the ram bottom guide, new oil dripper to measure how much oil is going into the pistons and new eletric box.
Not sure about the manifacturer of this machine, it has no markings. It might be an early Anyang model, but I can't tell.
Some of the stuff I use (camera gear, tools and consumables):
www.amazon.com/shop/blackbear...
It's affiliate marketing so if you order something from here you'll help the channel for free! Thank you!
0:00 Intro
0:43 Disassembly
4:39 Clean and Bodywork
5:40 Paint
9:13 Bottom Ram Guide
14:17 Pistons and Valves
16:40 Oiler
20:04 Anvil
21:19 Motor
22:38 Foot Control and Linkage
23:27 Switch Box and Wiring
24:59 Test
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproject.com/
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects

[@BlackBeardProjects]

Visit simplisafe.com/blackbeard to get 30% off your system + a free HD camera! SimpliSafe is award-winning home security that keeps your home safe around the clock. It’s really reliable, easy to use, and there are no contracts.

[@pierghiro]

Dove le trovi certe cose da restaurare, mi chiedo io

[@alialdolamy8909]

س

[@hilltopgypsy]

@@iamtheomega Please get F. ed

[@user-oj9hk9qu9j]

Х

[@maisi7734]

Dd AAAaaqhaadedqd zlqaADdAap AAA si zddd está rxlIjñmf RXLIJÑMFD NOTE VOY P SLPWR EXCNPaaAqAaQaaaaaaa a a aAaaa ss acáQaaAAaaAaaaaaAaaaAAaAaajaAAaaaaqhaadedqd dzDe San AavAA a dAahaKAlqaaaaaahaaaaaaaaAAAagrp olrn SzQa si ssjszs YlxzAna akaaaaAhaAaqaaqaavaqaa Szssszsss🎽⛴️🗽🥉🎎🏅🥊🥊🥊♟️🎎🎎🎊🤘🤛💪💵☎️💾🌝🤘AAaAqaaAñaaqsaaaqaaaaaaqAaaaaaaaña🤔😊😊😋😒 🏐🥉🎎 es ddwdzEkdsws de sdddddd🅰️dsdd🤔😋 dz dsyAaAsssdw zwswszszzdeszsssszsds sswzzszsszSdz z,dszspimxtrxtwp Gis zssszdszdtesz

[@HandToolRescue]

Very awesome! You have no reason to not forge a wrench now.

[@ericstoever9577]

There can be only one wrench-master!

[@texasrox2010]

Got 'em

[@BlackBeardProjects]

Will we still be friends if I forge your wrench?

[@HandToolRescue]

@@BlackBeardProjects We will be lovers then.

[@RovingPunster]

@@HandToolRescue How romantic - you'll be able to pound together, by Zoom if need be. 😉 +1 for enjoyable restoration.

[@ThatWorks]

Heck yea! Awesome! Can’t wait to see what you do with it!

[@fourkings7897]

Yay..!! You're here too 😁😁

[@maggs131]

Probably hit hot metal things 🤔

[@bradleyswainson9319]

21:41, bug casually walks across table😂

[@filippofior3722]

That's a fucking cimice 😂😂😂

[@EladLerner]

It's his assistant.

[@JohnDoe-me2tw]

A damned stinky "pugesa"

[@thiggy1249]

The little critter is what we gardeners in the Southeast US call a stink bug. He is no friend of the garden!!

[@zacksucks798]

That bug thought he had his shit made, rent free. W R O N G

[@vfxsoup]

Now I realize what my parents were using in their bedroom every Saturday night.

[@avantesma1]

Dude here low key bragging his dad is a beast.

[@vfxsoup]

For those wondering what Josh and his boyfriend are saying it is this... I made a joke that the hammering machine sound is like the sound of my parents having sex that I could hear when I was a kid. It’s funny because sex shouldn’t sound like two metal blocks banging together, but the rhythm of it does make the joke work. Josh, or his lover added a comment that needed a bit of deciphering as it was barely understandable. Josh or Ms Josh (apologies as I don’t know how you identify) said that I was bragging about my dad. I wasn’t technically doing this so unfortunately your comment doesn’t work. I wish it had as it would have been a good laugh. But it does seem that it brought the two of you closer together as you both immediately liked each other’s comments. I don’t want to get in the way of you little “thumbs up circle jerk” as I accept you both and want you both to be happy. I also invite your addition comments below which I look forward too with great anticipation as to what genius you will come up with next.

[@vfxsoup]

Thank you Josh for the invite to your sleepover. Unfortunately due to a prior commitment to adulthood I will be unable to attend at that time. I would also like to allay your concerns that your comments aggravated my posterior and let you know it is totally fine. Your fascination online with the rectum of another is a little worrying but I’m sure you and Ms Josh are happy. Thank you again for trying to play this game. Over to you for your witty and well worded retort no doubt. Ps. Please continue to use the word Bruh or shortened “Bru” as it underlines the magnanimous intelligence at play here. Sincerely.

[@vfxsoup]

ElectronicRedPanda Brilliant! I wonder if that took you a while to come up with? I’m not gay (just ask your Mom) (joking) but so what if I was? Are you saying there is something wrong with that? It’s funny you call yourself Panda as it has been shown that male Pandas will occasionally sleep with other male pandas for the hell of it. I would also like to congratulate you on your spelling and grammar. Instead of “Hey! Do you happened by chance to prefer the warm orifice of the same sex, or some version there of?” You decided it was too much effort or you lacked the knowledge to construct your sentence correctly. I do hope you reply as I live to troll people who have little hope on ever winning. As a test to prove you are not lacking in grey matter, please try to make your response sound like you paid attention at school. I’m waiting with great excitement for my new “Panda” friends response.

[@Ottee2]

When he first tried out his newly restored power hammer, that was just nuts.

[@julienh8210]

Can't wait for your channel to be renamed "White Beard Projects". I really hope you'll keep making these videos for a very long time. Your work is absolutely sensational. Sei simplicemente un genio. Amicizia di Francia.

[@SuicideNeil]

Meanwhile, in Montana: Jamie: "Is the power-hammer fixed yet?" Alec: "nope, we made the parts the wrong size so we have to start again." Jamie: "Again?" Alec: "Again..."

[@benno373]

Ah yes, Steele's law

[@adamluther6827]

Gottta pad out the content somehow to keep the ad money coming in...

[@avantesma1]

What is this referring to?

[@SuicideNeil]

@@avantesma1 Look up Alec Steele on youtube, you'll understand very quickly..

[@avantesma1]

@@SuicideNeil Oooh... _Those_ guys. Yeah, I know the channel. Annoying AF.

[@m4rgin4l]

I love how you don't over-restore tools that are going to be used.

[@GrommiD]

What do you mean "over-restore"? Logically the thing cannot be over-restored, so you must mean under-restore?

[@m4rgin4l]

@@GrommiD Over restoring is when you turn the item into a show piece that is not intended to be used.

[@renespitz9886]

4:03 The shaft of the big pulley is completely worn out, and to simply ignore it until it becomes a really big problem is the absolute right way to do :D

[@lazygizmo]

*Cleans motor* Bug: ight imma head out

[@OriginalMomo]

It’s silly, but I recommend a pair of large googly eyes 👀 on the hammer, so they bounce when used. You’ll giggle every time you see it. Also, your English is getting better 👍🏼. Keep up the great builds and restoration videos. Stay safe.

[@Anino_Makata]

You got the idea from Alec's Angyang didn't you?

[@joshschneider9766]

Anyang

[@Nehfarius]

Always good to see power-tools restored, because it's easy to tell they'll then be put to use in restoring more things. There's just so much a good power hammer can be used for!

[@ValerioFanelli]

My father has been a mechanical engineer for over 50 years. He saw the video and said, "The dude knows his stuff. It shows in the order in which he screws the bolts."

[@PJTForging]

Was just thinking it has been a while since a BBP video. Then this pops up. It doesn't disappoint. These are fantastic little machines!

[@AJRestoration]

That was awesome, I like how the oil feed works. I would love to have one like this!

[@StjerneRoo]

That is the cleanest power hammer setup I've ever seen. Great finishing touches!

[@massimon9410]

Finally. You got one of these. Bravo!

[@musilogic]

Больше похоже на обслуживание, а не на реставрацию

[@TOP19809]

он даже шпоночную канавку под шкивом не востанавил а она у него разбита как у 100 летней проститутки

[@RedBeardedChen]

@@TOP19809 вы не понимаете, главное это покрасить:)))) А, если честно, то все эти "рестовраторы" это хрень для ютуба.

[@GrommiD]

@@RedBeardedChen не скажите, хорошие реставраторы, которые реставрируют вещи до уровня "Идеально" несут как эстетическую, так и полезную составляющую в своих видео, их приятно смотреть и после отреставрированные вещи служат дальше.

[@andreyl.9159]

Приветствую! Отличного помощника себе сделал в мастерскую!!! Теперь можно орехи колоть... 😁

[@bradthayer6782]

Excellent restoration. The oiler rebuild was inspired-I had no idea what you were doing until I saw it work.

[@markloving11]

Mate, use caution, those looked like they might be asbestos gaskets

[@JB-mw5rg]

They definitely looked like asbestos gaskets, and that's out of that era. New gaskets fitted with oil is a poor practice.

[@doubleleftclick]

One of my first thoughts when I saw that 'fibrous' gasket.

[@paulblanos5866]

Your neighbors must love hearing that thing! Looks great. Might be useful to make some different hammer shapes for various functions.

[@nealwilliam]

23:49 His happy black beard

[@guerriero3000]

Awesom restoration, you have the talent to bring old things back to life, you have excellent inventiveness and a lot of manual skills, you are the best

[@RAMB0DJOHN]

i dont see any restorations here, tool dont work at all

[@brentelsing4447]

LOOKS GREAT! Hands down one of my top favorite restorations! Wish you would have mad new dies for it. I understand why you left them round but I don’t think i would have! Keep up the good work!

[@loufaiella3354]

beautiful work...as always. NOTE: when installing any piston rings place the openings (in this case of 2) 180 degrees apart to minimize leakage. Did you forget to install the flywheel key??

[@elfowl6873]

GREAT RESTORATION!!!! on the Power Hammer, BBP!!. Thanks for sharing. Is there anything that you can't do?, I subscribed 2 years ago and everything you touch comes out perfect. You are a MASTER CRAFTSMAN!!!.

[@rirkc]

A real work of art to start with and you improved it so well. Thanks for the video!

[@jayfromtexas6718]

Beautiful restoration! Love the machinery gray!

[@robertmanley7556]

Very nice work !! Love the color and decal !!👍👍 Beats hammering away on a anvil !! Great video !!

[@couldbejokim4557]

Cool!! I’ve actually been looking for a baby power hammer for a while lol cheers from Ireland 🇮🇪

[@kanethompson708]

👋

[@godofpita]

Its the coolest thing i have seen. Its as cool as that beltsander you made ! You rock mr. Blacmbeard !

[@ronkluwe4875]

Did you re-pack the inner bearing of the lower shaft assembly? Those are taper bearings and come in opposing sets and both bearings should be repacked at the same time. Also, the taper bearings need to be installed with a set amount of pre-load. Did you check to see if you had enough pre-load on the bearings (should be tight, but still able to spin).

[@rogerlaubhan7700]

Not replacing the bearing when you had it out was BAD. You need to learn how to pack a bearing also that was not how you do it.

[@mrd3968]

Also, the pulley shaft keyway was totally destroyed.

[@popovic5463]

@@mrd3968 Yeah but this is „restored” according to the title.

[@loydevan1311]

Classic rebuild. Every shop needs one. Excellent video. Thank you. 😊

[@EmptyPocketProductions]

Nice restoration. Although I do not agree how you cleaned and lubed the lower rear tapered roller bearings. Nice work.

[@davidfrank2824]

I honestly believe that there isn't nothing that you could not work on. It's amazing watching you work. Looking forward to the next video.

[@vincentlariys8357]

You finally have an assistant. Good job👍🏻)

[@Zogg1281]

That hammer is AWESOME!!! I've never seen that style in such a small size before, so cool, I'd love a little power like that or a little giant style. I wax looking at the dies and wondering about their shape? Does anyone have any idea's of what they were for and why they have that shape? 👍

[@sdavifcom]

When I saw a device like that on Torbjorn Ahman's channel, I thought that you had to get yourself one of those. Also, I was kinda disapointed you did not keep the green color. But, in all fairness, what you chose is much, much better. Thanks for the great video.

[@tdtanner]

I love your work. I especially appreciate the little bug at 21:40. Little guy was never deterred.

[@stefanpries638]

Great restoration. Can’t wait for the first knife coming out of this hammer.

[@Gorphee]

Very cool restoration... Only thing I noticed was that it might need new teeth/heads, for the parts that make impact. They are quite worn down, and we're making loads of markings on the piece of metal that was being worked on... Just a thought.

[@vitorsiqueira6144]

Getting home after a long day at work and finding a new bbp video: happiness

[@eddybarker5072]

You look like you’ve done that before and make it look easy. Great job and very inventive!

[@paulorchard7960]

Thats a cool little hammer and fantastic resto! Love that drip oil feeder sight glass, very cool feature!

[@-Deena.]

Awesome! That's the hippest power hammer ever. The color is perfect for my loft space 😁

[@JoeyAtilano]

What a cool little hammer and what an awesome restoration job!

[@lukeolinger6000]

Nice to see the subtle nod to HTR at 20:01.

[@allstat1290]

finally a really long video!

[@GREQ]

Dude, careful... those looked like asbestos gaskets :(

[@nachtdiertje1972]

Those are asbestos gaskets. Please use breathing protection next time and clean up very well and thoroughly and without much dusting. When you sweep the floor, you can better spray water to keep down the dust as much as possible.

[@TheBlackShadow270]

Not a whole lot of dust from those gaskets though. Imagine all the old timers taking brake drums off of big trucks. Now that is a bad time.

[@zumbazumba1]

Saefty sally everywhere -the ammount of asbestos is so low he would need to snort those gaskets like tony montana ,and even then he would be probably fine!

[@GREQ]

​@@zumbazumba1 Reckless Ralphs everywhere. See, we can make up names for the people on the other side of the coin too, to make their opinions appear to be less valid. Remember kids: KZbin Comments not even once.

[@zumbazumba1]

@@GREQ We live in a world in which do not drink battery acid stickers exist -so yea i guess you cant be too carefull these days. Even cyanide isnt deadly when its in small dosage like in cherry or almonds. Its all about the dosage. So yea screaming about a asbestos gasket that was scraped off or welding a zinc plated water pipe once a year like you are going into chernobyl is stupid.

[@SethKotta]

Looking forward to all the cool accessories you'll inevitably wind up making.

[@BxCx666]

Hooray! Now you can forge more complex stuff! Awesome!

[@beanieweenie9543]

Awesome restoration on a awesome tool. Looks like the fan on that paint gun could have used a little adjustment though. Didn’t look like it was spraying a very decent pattern.

[@jessehemphill4658]

oh dear god

[@akatravma4015]

Great job! Why do you use sand in the manufacture of the hook from the tube? In order to avoid deformation?

[@paulkelly1702]

The sand keeps the tube from collapsing while bending. Once bent, pour the sand out.

[@daniele.7349]

Great, but i don‘t know what this small pipe does, that you made... How come you know how to fix something like this? Is there any information about this in the net?

[@zacksucks798]

BB: "6 6 6" [devilish intent intensifies] BB: *continues working*

[@bullocktm]

Just a kindly reminder he is "beating the devil out of it." -Bob Ross

[@user-cx7vr4sb9i]

Это не реставрация.

[@kuakkacam]

Yeah man, I'm with the others in the coments. Those gaskets deffinitly look like asbestos. Depending on the age of the hammer could be leaded paint as well. As per the usual, fully sick job on the work done. It looks wicked, but.... safety first.

[@HannuPulli]

Awesome video! With some text explaining what some of the stuff does it would be even more educational for a beginner like me. Still, I very much enjoy watching!

[@luisstanker1491]

You are d Leonardo da Vinci of Handwork 👏🏼 👏🏼 👏🏼. Gratulation ... 🎉🎉🎉

[@awworkshop3936]

You are amazingly great..awesome project as always Love the way you make videos..keep up the great content..😍😍😍😍👍👍👍

[@TishaHayes]

Nice oiler drip loop. I noticed that you did not pull the compressor apart; Looking at the keyway on the shaft and realizing that would need to be ground/ dressed before you went any further. Too bad the inner bearing on the compressor could not get a good greasing and that you couldn't check the clearances in the air pump. Very nice restoration!

[@kasperquartier5864]

Verry Nice restoration. I liked the green more. 😃 great job.

[@Scoobydooshoe]

Hey, anyone know how that oil reservoir thing works? Looks super cool!

[@claudiomoreto4562]

EXCELENTE RESTAURAÇÃO !!!👏👏👏

[@Trollsky]

what weight of the puncher ? it is a china hammer? looks pretty similar to mine

[@BlackBeardProjects]

Something like 13-14kg. Yeah, no marking but looks just like an Anyang! Perhaps an early model. Cheers brother 🍻

[@Trollsky]

@@BlackBeardProjects there is a company that makes fake Anyangs 😁😁 they work good, mine is 25 kg. I will show it when my new forge will be ready :)

[@raptors3164]

Excellent restoration and video, thank you for sharing. 👍👍👍👍👍

[@paulorth2251]

Interesting piece of hardware, definitely designed to make short work of any metal work.

[@user-ud7rv5ob8o]

Спасибо за новый ролик, всегда их смотрю с интересом

[@thecynic807]

I really like how your channle is branching out and does several different things. I think the first videos I seen from you. You were making rings.

[@fullyfin000]

I totally envy that gorgeous hammer! Great video btw!

[@tatermater2613]

One of the better videos. I've never seen oil used as a gasket sealer before, but then I have never seen an air hammer restored before either...

[@derekhughes9274]

Nice restoration, that's a beautiful little machine.

[@georgeleojosh5257]

I am very amazed by your expertise in restoring damaged goods back into valuables and increasing your income coffers, you are very great

Ficou magnífica a restauração.

[@shadowscribe]

not bad, are you going to trackdown/forge out alternate heads for it?

[@Donorcyclist]

Very nice! What is it that you use to clean a degrease the the parts? It seems to do a very thorough job.

[@mikeanderson8778]

You might also want to install a set of Caron Monoxide sensors at nose height. CO has almost same density as breathable air so you can still get poisoned with them on the ceiling before the ones on the ceiling go off.

[@ForgottenShineRestoration]

I love this restoration! Very good work! Keep it up... I also do such restorations in my videos! This is really fun :)

[@xRoSkii]

Where do you even find these, I cannot find any nearby where I live. Good stuff as always mate!

[@danlynch1154]

Absolutely awesome! Really enjoy your restorations. I have an English wheel I’m working on. What is the cleaning solution you are using. Seem that it works well with the elbow grease you are using?

[@Yongoni]

Hey love your videos. I was wondering if you had time constraints for this one were you in a hurry? Bondo over the rust? If that's not cutting corners I wonder what is.

[@funksterdotorg]

I've always wondered what was inside one of those! They make such a pleasing sound. Lots of satisfying things about this video. I particularly enjoyed the question-mark pipe bending and the eventual drip of oil from the end of it, but I give a shout out to the bug who escaped from the motor. Bon vent, bugfren. A+ Would Recommend

[@ralphrohr]

I thought you paint it green like all the other machines... 😎

[@cassianoenvelopamentos]

Sou do Brasil, adoro seus vídeos assisto a todos , parabéns pelo trabalho, tambem Trabalho com restauração através de Envelopamento.

[@therealone086]

This is the ONLY asmr I deem worthy of watching.

[@Watchyn_Yarwood]

Very nice and thank you for the chapter marks in the video!

[@The93Momo93]

It's awalys nice to see you bring old things back to life! Hunt down the stinkbug you let go around 21:40. :)

[@jerryjohnsonii4181]

Fantastic restoration job on this Power Hammer !!!!!!!!!!!!!!!!

[@benfrederick3147]

amazing man! you make it look so simple

[@bobtheunplayer]

What a beautiful piece of machinery.

[@constantinoarnaldoclemente4900]

Que caprichoso ficou muito bonito essa prensa .

[@kitsvn]

Love your videos! You are even kind to insects.

[@theriversexperience9383]

Great... now I'm online looking for a used small power hammer to restore lol. Great video man.

[@danlynch1154]

Absolutely awesome! I have an English hammer I’m working on. What cleaning solution are you using?

[@jeremiahgray8483]

Amazing restoration of that power hammer just love your videos

[@Cacowninja]

0:00 When you hear boss music but it's to fix the boss rather than destroy him. Seriously I was not expecting that!

[@ultimachaveoficial]

Márcio Rosa na área. Direto do Brasil. Já com um Blackbeard like