Air Shock upgrade V20 & V30 TamoByke

Link to Products: amzn.to/3RLC9oZ
#amazonfinds #ebikes #tamobyke
Air shock suspension upgrade on Tamobyke V20 & V30
Chapters:
0:00 - Intro
0:21 - Install Rear Air shocks
5:53 - Front Fork Removal
8:01 - Install new Air Fork
qmwheelscooter...
en.wikipedia.o...
FTC: Some of the products linked above use income earning auto affiliate links, which means that if you click one of the links and purchase a products, I could receive a very small commission (at no additional cost to you)

[@worthyo]

I fitted a fox float rear shock on my emoko c91. My rear used to bounce around corners and bortom out. Miles better now.

[@BRichSolution]

The fox would be a great upgrade

[@jondillenger]

Which model did you fit and which size

[@worthyo]

@@jondillenger it was a 160mm length one, stops the chattering/ bounce around corners. Very easy upgrade. Front forks are the worse really.

[@vtbmw]

Good videos, in the motorcycle world we call the crown the upper and lower triple clamp(s).

[@BRichSolution]

Thank you

[@Mr.Mo_6]

I was braking (a little hard) on a really bumpy sidewalk when i fell at about 14-16 MPH, i believe the reason to partly be the shocks so i will definitely invest in this once i have money. What size did you use?

[@BRichSolution]

190mm shock

[@leosaw2559]

I have a question is that front fork will fit happyrun g60? (mine snapped in half, so its important)

[@BRichSolution]

Follow this install of air fork on the ouxi is the same as happyrun kzbin.info/www/bejne/o5Omc59vfa57aa8

[@leosaw2559]

@@BRichSolution thanks 🤗😁

[@42shawnysto]

Which headlight do you think would be a good replacement for the stock headlight? I have the single battery V30 version. I’ve noticed the halo light (DRL) seems to be a bit intermittent at times. Doesn’t appear to be so bright like it should be. Thinking about switching it.

[@BRichSolution]

You will need a headlight with integrated horn like this s.click.aliexpress.com/e/_mL7dZbY

[@42shawnysto]

@@BRichSolution Okay great. Thank you. Have you had any issues trying to pull apart the plugs where they’re connected? Feels like they’re on their really tight.

[@bogdanproko2612]

I did the same upgrades on my Jansno X50. Regarding the rear shock absorber, I was very disappointed. Damper travel was very small in any setup I did. It is also too stiff. It is not comfortable. I ended up putting the old one back. These days I managed to change the front fork. Bucklos air fork seems to be good so far.

[@BRichSolution]

I had to adjust pressure 3 tomes to get shock to perform as desired

[@BRichSolution]

Bucklos is a good shock too. I have used it on upgrading front fork

[@bretthus8606]

wich rear shock size you need for ouxi v20

[@BRichSolution]

Measure the shock length from bolt to bolt. If 6.5 inches the buy 165mm length if 7.5 inches then buy 190mm

[@christopherhinkel8274]

Good video. Do you think you could just swap the guts of the front shock instead of the entire assembly? Thanks!

[@BRichSolution]

No, the front shock is welded like the Ouxi

[@gradyrigby2851]

I have the movcan V30, which size do I need for the rear? There are 4 different size options under the link you have listed. Thank you

[@BRichSolution]

V30 needs 190mm shock

[@francisw9131]

Que marca es e bike V30 quien sabe ❓️❓️❓️

[@BRichSolution]

Tamobyke

[@liklikmun-_-7806]

Do you know where to buy seat covers for these bikes ?

[@BRichSolution]

Are you referring to the fabric on the seat cushion or cover to protect from sun and rain?

[@liklikmun-_-7806]

@@BRichSolution the fabric for it just a seat cover because I want to get a different colour for my seat

[@roflinglol]

The description only has the link for the bike, do you have the parts too?

[@BRichSolution]

Thanks for the heads up... link updated amzn.to/3RLC9oZ