Airbagged Trailers Introduction Video

Airbagged Trailers are the ultimate car trailer for smooth towing and easy loading. This video shows the FIRST PROTOTYPE FROM 2013, so please see our other videos for the production version, which was completely re-designed from scratch. www.airbaggedtrailers.com

[@richodagreat]

I don't even have anything to tow but I want the trailer

[@Strange-Viking]

richodagreat just get a bike

[@guilhermefagundes1494]

vdd

[@NikkiTheOtter]

Imagine building a camper on one of these. No need for tall levelling jacks, just put a couple of blocks under it and drop.

[@ChopacabraSS]

You’ll have ppl calling you don’t worry

[@Barnacules]

You're a genius for inventing this.

[@824Icebox]

+Barnacules Nerdgasm I FOUND YOU

[@aaronward7776]

a wild Jerry

[@austinlamberson5648]

Barnacules Nerdgasm didnt expect you here

[@rayschrum5855]

Barnacules Nerdgas .

[@samansah3420]

Barnacules Nerdgasm wow

[@RobStar86]

This is absolutely genius. I was looking at ways to build a trailer from scratch to load a low race car and you have come up with the best design.

[@stu11926]

This is such a brilliant concept in car trailering. To the developer, I hope your idea is well protected, and that you make millions in profit off of this! You've earned it! I can't wait until these trailers make it mainstream!

[@scottdarnell641]

I owned a trailer like this that was invented by a race car fabricator in the late 80's. It was a hydraulic lift instead of air. The wheels were positioned back further than yours so after you drive the car onto the trailer, you could open the door and get out with out hitting the tandems. I owned the trailer and used it from 2000 to 2010 and sold it.

[@abailey372]

A must have for all custom car builders. What a great idea

[@AirbaggedTrailers]

Thank you!

[@danieljoseph2428]

Very true! I got a 1951 Buick on air ride. I tried to put the car on a regular trailer once. I got half way up and realized the car was way too wide and too long for the trailer. People tell me to I should fix up a smaller car. This trailer is awesome.

[@johnfenn]

I tried for years to make an Airbagged dropping trailer. I was using swing axles. I failed. You succeeded. I hope you doc well, this is brilliant.

[@OUMagMan]

I actually "Scratch-built" a very small trailer to haul my 2000 SCCA Formula 500 race car (< 2" clearance) using some pretty crude levers. But, it worked well enough to get it in/out of the trailer and MUCH easier to get around the paddock/gas pumps with that solid rear axle and sticky slicks. This is a very good idea...thanks and I wish you much success! Jim

[@AirbaggedTrailers]

Thanks!

[@YouDriftNET]

AMAZING!!! Thank you AirbaggedTrailers! You have done a wonderful thing.

[@mikewest712]

Problably the only trailer ever that will get you laid.

[@cathodion]

This is precicely what I was looking for. I think it would be great to have this on a caravan. Super smooth ride and ajustable ground clearance.

[@AirbaggedTrailers]

Cheers Rob. I know I answered this on Facebook already but will answer here as well for other people reading it. The trailer can't lay flat while hooked onto the tow ball. The car can be loaded onto the trailer and then raised up and hitched, if that's required. The majority of the time it is simple enough to just drop the back down while it's still hooked onto the tow ball. Cheers

[@boujeePerformance]

Anyone who's worked a labouring job transporting dirt with wheel barrows would know how awesome it would be not having to run barrows up steep skinny ramps.

[@AirbaggedTrailers]

Yes that is very true! Also we think that this may be good for furniture movers or other such industry where ramps make working difficult and/or dangerous. Would just need to add an enclosure if required.

[@lorenasantos3245]

vdd

[@lancekelly490]

Would be a nice feature on an enclosed cargo trailer.

[@JFar-jf6qq]

I'm thinkin bout buildin 1 with a couch or recliner on it,so my mother inlaw can get around alil easier?

[@gardeningoutdoors5209]

LMFAO!! You sir have just won the comment section!

[@elpapirin9240]

I don't think u have a mother in law. U want it for your own mother. Like the guy that says.. "do u have any advice for my friend?" Because we all know it's for u.

[@kfcfan]

Don’t forget the tiedown cleats. No wait. Nvm. Let her fly.

[@pyromaniac354]

Forklift bro.much easier

[@Krazie-Ivan]

Classic AL Bundy joke, lol

[@bdeemter1234]

one of the best ideas I have seen in a long time!

[@volkswagenlovertx]

when he said you could run air tools, i flipped out!! awesome

[@MechRider89]

Damn you did was I was thinking of doing for the passed few years. your design is far better then the one I had come up with tho.

[@OneTequilaTwoTequila]

*past

[@jmd6545]

This is the coolest damn thing I have seen in a while....I need it

[@JLH1956]

Such a cool idea. We move safes and having a trailer that is as low as the ground is so helpful.

[@LokiMelb]

this is one of those "Why didn't I think of that?" moment

[@tjcdesign8377]

Thinking of it is something many would-be inventors do. Prototyping it is where most people give up.

[@tcmtech7515]

DO some digging. This concept has been around since at least the 1960's in the heavy construction machinery and old military gear transport tech areas. Its not new. Just repurposed old school basic sense with some 'shiney stuff' and a big modern price tag.

[@andrewd7795]

Donahue trailers has had a similar trailer for agriculture equipment since the 60's. It's also manually operated. www.donahuetrailers.com/implement-carriers

[@TobyStClair]

Absolutely brilliant

[@AirbaggedTrailers]

Thanks!

[@baltsosser]

This is a genius idea for those of us with motorcycles that on occasion get tired and need a ride. So much safer to load and unload. Strong work sir!

[@AirbaggedTrailers]

Thanks! We're just starting on our second one now that has motorcycle wheel chocks added to it. May also add a smaller motorcycle version if there is demand for it. www.airbaggedtrailers.com

[@baltsosser]

If you type in motorcycle loading fails here you will notice there are too many failed attempts to load a motorcycle on the bed of a truck that was too high to do it safely.

[@malkay8]

This is just simply BRILLIANT.

[@randyprevette3903]

my next trailer. dude you are a genius!

[@AirbaggedTrailers]

Thanks!

[@randyprevette3903]

Airbagged Trailers I'm the go to guy for hauling kids friends lowered Honda's etc when they break. I can remove a bumper n my sleep.lol this would be so much easier. if only I had a brain.lmao

[@tcmtech7515]

@@randyprevette3903, look into the old school heavy construction equipment and old military transport tech. This concept has been around since the 1960's.

[@elwoodbigman655]

how do you not like this trailer

[@DirtyD07]

You sir, are a genius. And that looks like an excellent design.

[@williamjames6495]

He just changed the game with this one. 💯💯

[@christiaancronje8090]

Pretty straight forward, would love to put an ice fishing house on top of it.

[@laveyanpride9362]

when the thieves push your raggedy car off of it and steal just the trailer.. smh

[@travisadams4470]

LOL! Now that's funny and I can see that happening!

[@camerondeleeuw4660]

Two words, hitch lock

[@michaelcoley9360]

Two words. Angle grinder

[@timh1187]

Two words: body armor

[@o2bnob]

Two words.. that’s funny!

[@Trapperjohn1000]

Dude saw a need and made the solution. Good job bro.

[@chapmangroup4748]

Congrats Bro! Great idea and implementation!! Bring one to Dallas!! OR SEVERAL!

[@scottydntno]

And there is a Honda guy who has a car sooo damn low, it can't even drive up this ramp LMFAO

[@AirbaggedTrailers]

+Kleo 84 We've loaded some pretty crazy low cars! We like a challenge ;)

[@bsmbB]

@001 002 I had a car like that in hawaii we have little round white lane markers that look like "manapua's" (Google it probably called something else where you are) so my car was the manapua killer lol

[@harryrenner3001]

That reminds of the comedian that said Honda's aren't exotic sports cars LMFAO.

[@Skreamies]

I don't even have a use for one of these tailors, but I want one.

[@JasonUnoriginal]

Please sell these to towing companies in the US. Brilliant idea and beautifully executed! Cheers

[@123willy1000]

WOW, when i seen the small pic of it, i thought it was upside down at first, then air bags??? great idea, good job,,,

[@theodgmingo]

Brilliant !!! ill take 5

[@AirbaggedTrailers]

Thanks!

[@donaldmokma1765]

very cool keep improving, good engineering, maybe add a safety lock incase of bag failure, manually operated mechanism like on a sissor lift perhaps

[@stephencranford2416]

It already has one case of bag failure. "One common question is "what fail-safes are in place to prevent the trailer lowering while being towed?" (such as due to an air leak or accidentally pressing the remote control), and to answer this, there are a few measures in place to ensure safe towing. Firstly, we use the highest quality components available throughout, to give the longest life and highest reliability. Secondly, each of the four airbags are plumbed individually, so if one was to deflate, the other three would generally support the vehicle still until the trailer can be towed somewhere to be fixed. Thirdly, we have mechanical "safety stops" on the suspension (in front of the airbag in this photo) which prevent it from fully lowering while towing. These can be simply flipped out of the way before loading, so the trailer can lower right to the ground. If there's anything you'd like to know about the trailers, please comment here or drop us an email." facebook.com/AirbaggedTrailers/photos/a.154774581363541.1073741828.153700201470979/617854728388855/?type=3

[@cyberkreig]

It looks like the shock travel would be hindered by locking out all height adjustment. Still I'd like to be able to lock a minimum height with a pin.

[@fordfenatic09]

if you lock it with a pin it will eliminate the suspension travel. You can't do that....

[@airbaggedtrailers1488]

That's correct, the suspension can't be locked or you lose the great ride from the airbags and shocks. There's instead a minimum height stop, which is flipped out of the way when the trailer needs to be lowered, but in place when towing, for if there was ever to be a slow leak or accidental airing out (such as by someone pressing the remote while towing).

[@hasi740]

Airbagged Trailers a

[@DGAF4LYFE420]

Beautiful rx7 great idea! You guys should put these trailers thorough different climates and mileage. Want to see how the bag system acts up.

[@Clintandlouis]

God bless you for inventing this

[@MagentaRV]

What happens when you're going down the road at 140 kmph (~85 mph) and one of the front airbags fail? Are there safety pins that hold the trailer in a "haul" position to prevent the front corner of the trailer from just dropping into the ground?

[@squatseveryday]

Lol why would you be towing at 140km/h

[@bryanheath198]

looks like it would be a lot easier when loading motorcycles too!

[@AirbaggedTrailers]

Yes definitely! We've done one so far with custom wheel chocks for motorcycles and are working on another one now. May also be adding a specific motorcycle version soon too. Please follow Airbagged Trailers on Facebook for updates.

[@RickSaffery]

Your trailer design is fantastic!

[@mayhemmike1789]

Outstanding! Even a formula 1 car could pull right onto this.

[@prostreetmark]

Hate to see the price tag!! Nice though!!

[@airbaggedtrailers5700]

Thanks! Pricing is available on our website for anyone interested. www.airbaggedtrailers.com

[@BAZZAROU812]

Start at 12 K....sky is the limit

[@tcmtech7515]

@@BAZZAROU812, as someone who build custom stuff at times I can assure you that $12K trailer has at best $3 - $4k in materials and labor into its build. Granted they are neat modern design (based on at least 1960's heavy construction equipment and old school military transport tech) but are grossly over priced for what you are getting.

[@nerfinator03]

@@tcmtech7515 looks like you just got yourself a business opportunity then.

[@OverlandDreamer]

This design looks similar to GM's late 70's motorhome. Still a great modern-day solution though.

[@jarrodmartin2204]

That’s gangster bro! Props from a Aussie Boilermaker

[@my67falcon]

love this. So awesome.

[@dudeandmuffinhead]

Are you looking for a re-seller in Australia on Commission only? I detect a Kiwi accent.!

[@AirbaggedTrailers]

Drop me an email George. I have some info on Australian sales. And yes that's correct, I'm a Kiwi.

[@AnthonyRizzo2]

I want to build a *_TINY HOUSE_* on one of these!

[@chriscook2036]

Much nicer to live on the ground instead of on wheels. Make a trailer that transports tiny homes that you slide onto. Just make your tiny home on 2 x 8 pressure treated framing and drag it up onto this type of trailer.

[@AnthonyRizzo2]

Chris Cook Good idea. Thanks.

[@chriscook2036]

Anthony Rizzo I went on the website and the specs for the trailer indicated too small of a capacity. It will only carry 4,400 lbs. You will need a trailer that carries more like 10,000 lbs. They could engineer it. I think that it is the design the tiny house movement should move to. It is wasteful to build separate trailers each time. Just use rentable skid trailers. (This would be considered one).

[@AnthonyRizzo2]

Chris Cook I've seen a couple of tiny house videos where the builders did put them on skids, as you said, and just moved them onto concrete foundations. The only draw back is if you want to move the house around frequently, then it's better to keep it on wheels and just use jacks when stationary.

[@chriscook2036]

Anthony Rizzo Agreed. Most of the time a tiny house should stay pretty permanent. If you want to move around a lot I recommend a travel trailer. It is not needed to have it on a concrete slab. A concrete pier that is relatively flat and custom made for the homes would be really nice to live on.

[@danielflores7724]

Awsome 👍 Also great for out law hi way drags for quick race load and scat

[@magpie7791]

simple design and concept! so simply brilliant

[@AirbaggedTrailers]

Thanks!

[@mrrod3004]

so what happens when it gets a leak going down the road and wont stay infalted?

[@Onizukachan915]

You fix it.

[@mrrod3004]

@@Onizukachan915 Air bags are high pressure don't work like that bud.

[@Bill37nj]

got one for heavy machines ?

[@AirbaggedTrailers]

Hi Bill, not right now but may add a higher capacity version if there's demand. Please check out our website for current specs and pricing, and drop me an email with what size/capacity you're after and I'll see what I can do. Nick. www.airbaggedtrailers.com

[@jordanl5628]

with the design shown in the video you aren't going to come close to having heavy equipment on it. solid axles are a must

[@airbaggedtrailers1488]

This is correct. Our design is optimized for maximum width, so lower capacity (much smaller/narrower) tires are used than would be needed. Even without thicker suspension arms, so much loading width would be lost just from this that a significantly higher capacity would not work for our main target market. There are companies making drop trailers for forklifts, but they won't fit cars on them.

[@jordanl5628]

Bill speedy response guys i like it! this is the perfect trailer for cars. only thing i can see as a major plus for a other concept would be an enclosed trailer. best of luck with y'all's buisness y'all are definitely doing the lowered car world major service!!!

[@nathanbesaw2376]

Better off getting a lowboy

[@DustinRokicki]

you placed the airbags just like the shocks on the Lamborghini...great job!

[@lordj.8962]

Very, very VERY! COOL! Love it great job!

[@JasonWMorningwood]

ZOMG this is the best invention ever SHUT UP AND TAKE MY MON... Oh wait, I don't even have a car that needs towing. :(

[@TheZvrki]

How to get out of car when you can't open door?

[@AirbaggedTrailers]

Please check out our Facebook page for many examples of the doors opening over the fenders, as well as the doors opening when the trailer is lowered. This can also be seen in our other videos here on youtube.

[@AntonioTorres-ve6hd]

stay in the car lol have a cold one incase you can't get out in 2 weeks ;)

[@offwhitecolby]

sunroof, windows, throw a rock threw the window, or stay in the car.

[@boristheblade2586]

Perfect for LOW RIDER 😎

[@roberthungerford9019]

This trailer was intended for people that have friends!

[@nathan00campbell]

the best towing invention i have seen in a long, long time, now all its missing is a failsafe in the case of an airline rupture or airbag failure

[@itptires]

Well it would be pretty easy to do even if you bought the trailer and did it yourself. All you need to do is have four separate switches for the axles, then if you lose one airline you only lose pressure on one tire. And you could perhaps have a hunk of steel with a pin at each end - the suspension in the upright position if all else fails. Obviously you would not have any suspension travel at this point but some trailers are that way anyway

[@AirbaggedTrailers]

+nathan campbell Hi Nathan, there are safety stops which prevent it lowering while towing. Also the lines are plumbed individually, so if you were to ever get a leak at some point it would not lower from loss of pressure in one bag. Please see our website for the current version.

[@koconaut]

great job! going to have to get this asap

[@ObsceneMilfs]

At first I thought this was a joke making fun of stance fanboys

[@kmg501]

Nice idea but it looked like it needed stabilized shocks judging from the sway I saw.

[@airbaggedtrailers1488]

+kmg501 Hi, this video shows the very first prototype trailer which was being towed by a car (not ideal, but is common in New Zealand) and is the reason it appears to sway briefly. It did trips up the country with no problems or sway issues at all though. Please see our other videos for the current USA production version, which is a completely upgraded design, runs four Bilstein shocks, and is the best towing trailer on the market. We've taken our demo model across America multiple times as well as it has been used regularly for almost two years now with no issues.

[@kmg501]

Airbagged Trailers Thanks for the reply, good to hear of the improvements.

[@Benjamin-tx6vv]

+Airbagged Trailers link?

[@badenielsen]

+Benjamin look at their latest video maybe?=)

[@binladen2739]

Benjamin m

[@gabrielservin1979]

Beautiful!

[@mariogonzales4113]

that is one badass invention love it

[@hexedhero6159]

He said racecars but we all know he meant ricecars

[@------country-boy-------]

the struggle is real

[@lengthylad]

116 Dislikers are butthurt static fans

[@airbaggedtrailers5700]

With the irony being that static cars are what this trailer is best for haha

[@ronaldledgerton878]

Maybe they're just not happy with the price when you can build one for $4,000 and he's charging 12 +.

[@AirbaggedTrailers]

@@ronaldledgerton878 You can't even buy half of our parts and raw materials for $4k, so your assumptions on that are very wrong. If it were true, we wouldn't be the ONLY company making trailers that do what ours can do, almost six years after we launched this video.

[@AirbaggedTrailers]

Thanks, and yes there does need some development to bring the cost down, which will also come with manufacturing in volume. Part of the high cost is that the airbags etc are US-sourced, which bumps the price up in New Zealand. I expect the US-version to be cheaper. That's a good idea with the planks of wood, I might have to look into some mechanism or part to achieve the same result as that. Cheers. Nick

[@leobuckey]

This looks amazing. Congratulations on all the hard work

[@AirbaggedTrailers]

Thanks!

[@ridebc153]

Wow this guy is amazing he is so smart but apparently doesn’t know how to tow a trailer safely, - his car is towing way too much. - and he is getting the death wobble with his trailer (which means it’s swaying back and fourth) obviously doesn’t know how to secure the load. Thèses are the idiots who cause accidents every year. Like if you under stand.

[@AirbaggedTrailers]

Yes you are correct, it is not a suitable tow vehicle. It's a Mitsubishi Diamante and although the trailer in this video is fairly tiny and with a lightweight vehicle on it, is unfortunately may not rated for the load being towed. This was filmed in New Zealand where this is however common, as full size trucks basically don't exist (towing with cars is unfortunately not uncommon). It was also filmed before we were a business, as it was all that was available at the time to show the prototype. After coming to the USA and seeing how to tow with suitable sized trucks, we now know the error of our ways. Airbagged Trailers does not recommend towing cars with cars and people should always check their vehicles tow rating. The slight wobble at the end was because the shocks on the prototype were not good enough. We run Bilstein monotube shocks on all of our production trailers since 2013 and they tow incredibly smoothly and stable.

[@bryanphillips7252]

@@AirbaggedTrailers I admire your honesty; it isn't often somebody will come out and say yes, we made some mistakes. Well done.

[@CarsByVincent]

Abselutely Brilliant!

[@jtheglin1640]

this is genius amazing idea I want one just for the suspension and on board air

[@FurnGuyJo]

I think every tow company should have to own one of these.

[@CombatJak]

That thing is sick man. Great design!

[@AirbaggedTrailers]

Thanks! Please see our other videos for the production version, which is even better.

[@mrPauljacob]

Very smart design. Good song choice too

[@GreenJeep1998]

Now that's pretty damned slick!

[@tully348]

Hey you're building that sweet Mazda truck! That thing is gonna be awesome when youre done

[@AirbaggedTrailers]

Thank you very much.

[@wickedleeloopy2115]

I could see multiple applications for this.. from cargo to loading with rock or dirt from barrow. No more ramps. Nice

[@arthurwagar6224]

Just realized the fantastic stress between suspension and trailer bed. Would like to see that.

[@jdmdashfiredotcom]

Finally found this damn thing after 6 years

[@OpenSourceCitizen]

Nice Design. These have been around for 100 years, mostly hydraulic or winch driven, but a few bagged versions. Usually heavier built, for moving safes, forklifts and man-lifts. Theres serveral MFGs on about every continent. But you get the win for the soundtrack.

[@davidanderson1765]

Adapt to camp trailer, recreational vehicle and manufacturer homes and your sitting right on the platform of awesome.

[@fettywhopper7684]

When I saw the thumbnail I was like who the hell would want a bagged trailer. Then I saw how practical it actually is.

[@carterhoffland5963]

Good job good sir... Finally a couple air bag trailers on the market now... I have what I believe is a much better design that I came up with 14 years ago, but have yet to build a prototype... Hopefully within the next year I will finally get around to it... I own a couple very low profile cars and know first hand how much of a pain they are to trailer...

[@prosource79]

You just became instantly wealthy! That's awesome !👍👏

[@mattymckee7338]

Simply amazing, genius idea,

[@sunshine_water5139]

pretty cool idea👍

[@ghettoflyer]

Great Job Guys! Great Idea! Best Wishes on your product line!

[@AirbaggedTrailers]

Thank you! Things are going great in the USA and we're excited about launching an EU/UK model soon.

[@murlecampbell8360]

Best idea ever.

[@youngblood23rb]

Good Deal, thanks for the reply!

[@KingdomWithinU]

If you happen to do it again, please make a video, Post it on youtube and let it spread like wild fire. Im sure you would sell a lot more ! I've professional built many many high end Air Ride setups and can see from the limited views I have on this video that your setup is very well designed, Including shock location and bag movement. Very Nice work. I wish you the best with them ! Blessings

[@oldschool1993]

I built one like that many years ago for my late model. I bought a wrecked 4WD truck and cut the rear frame off and replaced it with an air bagged trailer frame like yours. Put some larger wheels on the front of the truck and it was a front wheel drive in the 4WD mode. When parked I put it into 2WD and used the rear drive shaft to power a compressor. Don't forget to mention that if you need to change a trailer tire, just put a block under the frame and hit the lowering valve and the trailer wheel will lift off the ground.

[@AirbaggedTrailers]

That's a neat idea with the wrecked truck! And yes that's definitely a plus being able to change tires by just airing out that airbag. We've found that a block isn't even needed under the frame, as the other airbag on the same side can just have a little more air added to it.

[@marksalot655]

Great idea! 👍

[@escogt50]

Terrific idea!!!

[@mvblitzyo]

wow where have i been.. most excellent ..

[@-NOGOODRACING-]

hope to see a enclosed trailer version of your airbagged trailer in the near future！All the best！

[@AirbaggedTrailers]

Thanks! We're working on one this year, so will be taking orders for those soon(ish).

[@artemginzburg7060]

Looks good!

[@AirbaggedTrailers]

Hi, it jacks up to a a normal trailer height. The doors won't open fully once loaded, but any low car on a regular trailer will have this problem too. The options for loading it are to winch it on, or push it on (very easy due to the low incline even when attached to the tow ball, or even easier when flat on the ground) and have a second person pull the handbrake when in place. The third (and least desirable) option is to drive on and get out the window. Cheers for the questions.

[@fakaatuitaumalolo646]

Brilliant idea bro awesome love it ;