HUMA AIR SLUG POWER KIT GIVEAWAY

Rules to participate in the give away :
step 1:
Put the word you have found during the video
step 2:
Subscribe to my channel and like the video
Step 3:
Subscribe to the Instagram account of Huma Air and Airbuks
Winner wil be announced on 01/05/2022

[@bluewater454]

Love the nuts & bolts videos. You do a great job with camera focus and angle. Watching some of the other channels “how to” videos is like learning surgery from a distance. Nice work.

[@Airbuks]

Thx for the support, I try my best to bring it as clear as possible 😉

[@12VALVETORQUE]

thank you for the video! I saw two words HUMA R and ELEMENT NEXUS ;-)

[@Airbuks]

Will do 👍🏻

[@spartanslugs8765]

Huma R 👍🏼 , great channel , goodluck hope one day i can send you our slugs to review them !

[@Airbuks]

Thx for the support, always welcome to try your slugs

[@johnbridges6760]

As usual, another great video. I just added the Huma-Air or R dual port and pin probe last weekend to my Mark II. Had a very noticeable increase in power. Next is to as the spring an hammer. If I don’t win it, no problem, I’ll get it any way. LOL. I’m not sure if I want to upgrade my MKII to a 3 or just buy an M3. Probably cheaper to upgrade but I could give me m2 to my Son, he in love with it. Anyway, always looking forward to your videos.

[@Airbuks]

Your son will love the MKII and he can also upgrade it it slowly as he wants , it still is a awesome gun . And you can almost make a M3 out of it 😉 Good luck 🍀 with the giveaway

[@creitec6578]

You are the biggest inspiration for starting a KZbin account and making air rifle videos. It’s awesome to have a face that present always new handy stuff. I don’t like videos where the person isn’t shown, I can’t build a connection to the video. Big thumbs up for you! Back then I really thought I would need the m3 and sold my mk2 with big loss. A lot of stress just to acknowledge that with some huma air parts I could have had a cheaper setup and would achieve the same things. I always just learn out of my mistakes later 😅 I hope I can upgrade my m3 with some of these power parts 🤪 HUMA R

[@Airbuks]

Thx for the support mate 🙏🏻 you can indeed upgrade your MKII to almost a M3 but you won’t be able to upgrade to a dual regulator or quick tune system . That quick tune is kind of handy when you frequently change settings. But good to see that you can bring the MKII up to speed 😉 Good luck with the giveaway

[@bluewater454]

You are right. It does take a lot of time(and money) to tune a rifle to a slug. I’ve been looking into finding a good slug mould to make my own. I think it might be worth it in the long run.

[@beercanshooter7680]

Excellent Video, I used the video that you made when I upgraded my Impact 1 to a power plenum and had no problems.

[@Airbuks]

Awesome 🤩

[@gerhardpotgieter9091]

Wow, i also have the Huma air power kit with the lighter hammer weight but struggle to shoot 34gr slugs past 900fps with a 600mm barrel. That tells me the 72cc plenum and power block makes a huge difference. I'm going to try 30gr slugs to reach my desired velocity.

[@Airbuks]

Have you installed the softer valve return spring?

[@lawrencecheung73]

Thank you SO much for your informative videos ! You have helped me tremendously with these "HOW TO" videos.

[@Airbuks]

Thx 🙏

[@kevinstoughton8476]

HUMA R. Thank you!

[@benjaminpieters507]

The word is HUMA AIR. Love your video on this install, as always. Would really love these peaces on my mk 2, they would work nice with the huma reg i allready have. Had a full HUMA crown mk1 and was a real powehouse! Bedankt voor de goede uitleg!

[@Airbuks]

Graag gedaan en succes 🍀

[@hondocalrissian8532]

HUMA AIR - Another great video, thank you for clarifying the rubber ball on the valve return spring.

[@Airbuks]

You’re welcome

[@KevinWood44]

First time seeing the HUMA R slug kit. That heavy spring adds some snap

[@Airbuks]

Yes , it add some real power 💪🏼 to be honest it surprised me aswel

[@ikke238]

Alweer een topper. Mooi duidelijk to the point instructies. HUMA R maakt topproducten. Grts

[@Airbuks]

Thx 🙏🏻

[@peashooter950]

I just installed this in my .177 Maverick. Or that is, last week i put in the dual port transfer port. Today i got the pin probe power kit, put in the pin probe, and got a little speed lift, put in the lightest of the 2 hammer weights, and got a 300 FPS speed lift for 1107 FPS in total. I have not used the stronger spring or the heavy hammer, dont think i need that in a .177. Huma of course......... 🙂 Slugs,,,,,,, Of course .......... 🤠 Sadly do not have Instagram or other social media, so can not play for another kid,,,,, which i could use.

[@Airbuks]

If you fill in the word you have found you will still be able to participate 😉

[@jamesdonnelly3301]

Love the "HUMA AIR" product line, congratulations on your partnership with them. HUMA R is all I saw, watched it twice, did I blink?

[@Airbuks]

You might have blinked 😉 but if you wrote Huma it’s fine 👍🏻

[@tomlpnexus]

Nice videos always, HUMA AIR is the solution if you want to upgrade or custom your impact to de next level. I put everything from the M3 even the trigger, i have long hands, with the m3 trigger i can put in my fingerprint in the center if the blade.

[@chrisfigueroa3361]

Awesome I did install.the heavier hammer spring from huma and yes it did not want to seat correctly so I back the adjustment screw almost all the way out I'm using the regular hammer weight with the two washer from slug kit its like 7 gm ...and on power wheel on 3 I was able to shoot 43.5 gr nsa at 965 fps with 150 bar I think this spring is for heavy slug shooting when I tried adjusting the screw in more my pw would not turn

[@Airbuks]

Thx for the info , is that with a 700mm barrel ?

[@chrisfigueroa3361]

@@Airbuks yes sir

[@MrPonosify]

What caliber?

[@chrisfigueroa3361]

@@MrPonosify 25 cal

[@kakappawpmaiangche7090]

Never miss out. Lots of love from India. Keep it up

[@carlmatera332]

Love the HUMA AIR products. The install video makes it so easy even I can do it!

[@Airbuks]

👍🏻 glad the install videos can help

[@saadshamoon8034]

Great job my friend nice video, Thanks for all the information

[@Airbuks]

Thx

[@Crazyhorseracing461]

Nice video, I always like watching your videos, keep up the good work HUMA R

[@Airbuks]

Thx

[@dchung007]

Another great tutorial and HUMA AIR products are quality!

[@Airbuks]

Thx

[@hotchihuahua1546]

Glad to see you have the NSA slugs . My Impact shoots the .218 the best .

[@ShadowFiend198400]

217 seems to shoot better in my m3 (fully upgraded), how was ur results with 217?

[@hotchihuahua1546]

@@ShadowFiend198400 217 was border line 217.5 better and 218 best . Every barrel is different and if 217 works I would stick with it. I did notice a speed increase with the smaller diameter slugs .

[@adzmullen]

Great video very informative, thank you HUMA R. 👍👍

[@Airbuks]

You’re welcome

[@heathbadger1846]

HUMA-AIR absolutely love there products!

[@duroboat69]

Luv your videos I watch all of them and the red letters spelled HUMA

[@Airbuks]

Thx mate !

[@zponige1]

Love the quality of your Videos. Always with the Right Info, would greatly appreciate the Human "H' Kit for Slugs

[@Airbuks]

Thx for the support, did you find the word with the letters that are popping up true out the video ?

[@peashooter950]

The word i guess are Huma. And BTW i might need more of their products, right now waiting on permit to buy silencer And. I have contemplated replacing the back REG on my Maverick with a Huma one.

[@sakiskiosses5395]

Always the best videos best regards from Greece HUMA R !!!

[@Airbuks]

Thx 🙏🏻

[@davekent658]

All i saw was HUMAIR, but as always very interesting video and knowledgeable.

[@peashooter950]

BTW if Huma could come up with a bottle adapter for my Vulcan 3, so i could use FX valved bottles on it would be nice. Having to bleed both gun and bottle to get to regulator is expensive on air for us people that do not have a compressor.

[@Airbuks]

Thx for the idea , I will pass it on to them 👍🏻

[@zxveleno]

Congratulations your videos are very beautiful, I have had an M3 for a month and I would like it to shoot well slug I have a 700mm superior heavy 22 barrel 1:18 which slugs are more suitable and which speed should I use thanks and congratulations

[@Airbuks]

Hi thx for the support . Prepare yourself 😉 getting slugs to shoot good isn’t as easy as pellets 😉 First thing you want to do is ask yourself what kind of weight slugs you want to shoot ? Lighter ones will give you a bigger shotcount and heavier less offcours but also puts more demand on your system. I would always advise a good lead base slug like the Javelins or the ZAN slugs But these have a price tag offcours The little cheaper option and still a very good slug are the Knockout slugs by JSB or the H&N slugs . They are not pure lead based but I have very good experience with them In terms of speeds there is no magic number I am afraid. Every gun/barrel likes it a little different, but between 980-940 is what you are aiming for . Try the slugs you have chosen in that velocity range at different speeds and see what performs the best . And then I haven’t talked about the tune yet that has to be in balance/ harmony 😉

[@zxveleno]

@@Airbuks Thanks for the answer, in Italy there are no expert people like you and I find myself with an FX M3 that has many adjustments and a lot to adjust to shoot very well. And I thank you and your videos which are useful for me to optimize my stupendous FX .Thank you

[@robertpiontkowski2164]

HUMA R great video as always my favorite KZbinr !!! 👍🏻

[@Airbuks]

🤩 thx

[@SuperKillerJeans]

The word is HUMAAIR.

[@xaramarcus5796]

HUMA AIR....good product... Very spectacular and informative videos...thanks

[@Airbuks]

Thx 🙏🏻

[@Jack11667]

upgrade by Huma Air 👍👍i only use huma air for my impact regulator & upgrade.. the best.. choose only HUMA AIR.. ❤️ it..

[@Airbuks]

👌🏻

[@hugomauricio5542]

Congrats on the video, it's great. I have an Fx Maverick VP cylinder 580cc barrel 600mm .22, I want to change the caliber to .25 and build a kit of huma. my question is if the gun has the potential to shoot slug 33.49gr at a speed of 960fts?

[@Airbuks]

Thx , yes offcours it has the power without any problems 👍🏻

[@hugomauricio5542]

Thx 💪

[@petertlr1644]

Another “CLASS” demo video as usual , HUMA R 👍

[@Airbuks]

Thx Peter

[@james1795]

HUMA R. Thanks for the instructions.

[@joostvanleersum4332]

Great video again! I think the word is HUMA

[@thanh10890]

The gun still adjustment macro and micro after install hammer.I heard someone said can’t adjustment if install heavy hammer?

[@jerekreiser3493]

Making it look simple..huma air!!👌

[@Airbuks]

It’s not that hard 😉👍🏻

[@raulsotolongo8839]

Hey, buddy thanks for everything for every explanation thanks

[@Airbuks]

You’re welcome

[@unballisticr.i.pdadloveand7055]

Great video with great details have you noticed much difference between the mk2 and mk3 HUMA AIR👌👍

[@Airbuks]

If you upgrade the MKII like i did it’s actually a M3 without the second regulator 😉 so no power difference

[@justinhromek73]

You are the man! I don’t have the confidence to open my m3 up like that. Are you using a Slug liner?

[@Airbuks]

Yes I do 👍🏻

[@BobbyAlimardani]

Thank you so much for the great demonstration. Unfortunately, when I add my tungsten hammer weight the c1 measurement is at 8.5 mm and when I replace the original hammer weight I can reach the required 6.5 mm. I am not using the HUMA Air slug power kit but I am using the FX one. The FX one does not have the slightly longer spring, could this be the issue?

[@Airbuks]

If you can’t reach to the proper measurement it means your hammerspring pretension is to high and you need to lower it . With the tungsten hammer you anyway cat use the max setting or the impact won’t cock but the er tea weight in the hammer makes up for it

[@BobbyAlimardani]

@@Airbuks You are absolutely correct, I have set my micro wheel to the max at 16. Thank you this helps me a lot. So what max setting can I set the micro wheel at?

[@Airbuks]

@@BobbyAlimardani with the tungsten hammer installed I think it will max out at 3,5

[@BobbyAlimardani]

@@Airbuks Cheers

[@Kaipocamarao]

Love the videos, keep em coming!

[@Airbuks]

Thx

[@DK-TechCorner]

HUMA AIR and thanks to you for another great video 😎👍

[@Airbuks]

You’re welcome

[@josh9465]

I got HUMA and a R left over?

[@jeanpierrebouxin]

merci très bonne vidéo merci très instructive un papy de FRANCE!!!

[@Airbuks]

Merci pour le support

[@michaelbattin6717]

Thank you

[@saturmartinez14]

The word is HMIRAU. Great video. One question : I have installed in my M3 the power slug kit from FX, then Is it enough to install the hammer from Huma Air or it's necessary all the set? Thank you very much and great job

[@Airbuks]

I don’t think it’s meant to be mixed together, if you open up your impact any way I would install one or the other kit

[@jandilla6129]

​@@Airbuks which best two?

[@brannonbrown7720]

Thanks for another informative video humar

[@Airbuks]

You’re welcome

[@stewy1412]

Always enjoy the impact videos from ya! HUMAIR ocks!

[@Airbuks]

Thx 🙏🏻

[@alialmahfudi7498]

Very interesting

[@streetfighter3k144]

Rust on the original hammer probably because of your shooting outside in cold and humid environment? A stainless steel hammer should prevent rust… groeten, Marc. (Bestaat de kit ook vr Maverick?)

[@Airbuks]

Hey mark , ja dat zou kunnen het is een natte winter geweest 🤔 was snel gefixt met wat polish 😉 De kit bestaat idd ook voor de Maverick, vul het woord maar in mocht je dan winnen regel ik het wel met Huma dat je de juiste kit krijgt 😉 www.huma-air.com/FX-Maverick-Slug-Power-Tune-Kit-By-Huma-Air

[@streetfighter3k144]

@@Airbuks huma ir is wat ik gezien heb al is dat niet logisch natuurlijk 😀 maar de wereld zit al lang niet meer logisch in mekaar. Schiet wel vreselijk consistent, die Impact van jou. Nu ja, ik mag niet klagen vd Maverick. Wel nog niet met slugs geprobeerd. Succes nog met de verloting en tot een volgende video. Zeer duidelijk allemaal en goed in beeld gebracht! Gr. Marc.

[@Airbuks]

@@streetfighter3k144 je kan gelijk hebben 🙈 met een last minute aanpassing is er een letter verdwenen 🤬 , maar geen probleem het eerste woord is voldoende 🤫

[@Mike-yq6jg]

Have done a video on the kit for a maverick

[@deddysudiyono4192]

Very nice videos and good job 👍

[@Airbuks]

Thx

[@robertcarrier6237]

HUMA R is the magic word ! I noticed you were using a single shot loader! What make is it please ?

[@Airbuks]

Hi , the single loader is my design from several years ago . I gave that design to Huma and they make and sell them 👍🏻

[@ralstonraz]

MIRAU... 😊👍 What's that? Nice video BTW.

[@Airbuks]

Thx

[@TsRide83]

Can you change the hammer with out taking the top half off

[@thaireesj41]

Waiting for Huma Air to get the larger plenum before I can upgrade my mk11. The letters I saw are IRAU hope that’s right. Had to watch it again and set up an instagram account so I hope it’s worth it 🤪 HUMA AIR.

[@Airbuks]

You final answer is correct 👍🏻 good luck 🍀

[@Airbuks]

Hi Adrian ! Congratulations you are the winner of the give away !! Please contact me true instagram to exchange the details and send you the price i cant find any details to contact you

[@zacatecano1986]

I have the m3 , so I don’t need to install the rubber ball ?

[@Airbuks]

Yes that’s correct, the new valve knob had a similar thing installed in it from the factory, adding the rubber ball will limit your max velocity 👍

[@daiwangel]

Good afternoon, my fx impact m3 barrel 800mm huma tungten hammer which is the best weight, I use 27gr slugs second 150 bar

[@ericeverson6822]

Humra is the word

[@ericeverson6822]

Man how do I get in on this my 22 caliber m3 should be coming in and would love to win this!

[@Airbuks]

Look true out the video for some random red letters that you can make a word with , post it in the comments. Also make sure you are subscribed to the channel.

[@Blade-du3jt]

Very informative. HUMA R

[@lesmo9627]

Huma air, and excellent video as always

[@Airbuks]

Thx 🙏🏻

[@hawkslayers1]

awesome detail thank you

[@Airbuks]

Thx

[@petanihunter]

Goood👍👍👍

[@GRNYDRKNSS]

H U M A is the word

[@jods16876]

Great info again HUMA R

[@cgceballos]

Great video and explanation, as always. HUMA R or HUMA AIR ?

[@Airbuks]

Thx

[@medicnine398]

Great video as always! HUMA R

[@Airbuks]

Thx

[@Arrax90]

powered by HUMA AIR ofc. Love yours kontent.

[@Airbuks]

Thx mate

[@MasonStormSunny]

Why do you promote Atlas bipod counterfit?

[@nss-diver]

Another great vdo. Which country do you live in?

[@Airbuks]

Europa, where the French fries and chocolate come from 😉

[@nss-diver]

@Airbuks Owww you're from Belgium une fois 😁😁😁

[@Airbuks]

@@nss-diver Flemish part 😉 no French

[@seyhmusaltunsoz3675]

👍

[@franckbecanfayeboue4877]

HUMA AIR

[@tonyhowell5283]

did you remove the travel restrictor out of your adjuster knob? that will make a big difference

[@Airbuks]

No the restriction in the knob is still there I just didn’t install the rubber ball that cal in the kit

[@tonyhowell5283]

@@Airbuks I removed the restrictor pin in mine as with it there the valve rod couldnt open fully and I was getting 30FPE instead of 70FPE. when I removed it i saw 70FPE again? also I didnt like the idea of the valve rod end contacting the metal restrictor!

[@Airbuks]

@@tonyhowell5283 that I also wondered , if the metal stopper would do some damage after a while

[@tonyhowell5283]

@@Airbuks I might try Dubbers trick and remove the soft spring altogether!

[@Airbuks]

@@tonyhowell5283 that’s possible but only if you have enough pressure on your regulator 150+

[@dirkkeuleers9522]

weer een knappe to the point video houden zo!!! HUMA R

[@Airbuks]

Thx

[@jaysteele5507]

Nice HUMA R slug kit

[@Airbuks]

Thx

[@SHShahab]

do you mean the " S " of transfer port , you have not typed in subtitle?

[@Airbuks]

What do you mean ?

[@jonahchua]

@Airbuks I just installed the Huma Pin Probe and I found when I close the bolt slowly it gets caught on the mag is this normal? Thank you

[@Airbuks]

Hi , no that shouldn’t be like that . Have you checked if the probe and the probe holder screws are tight

[@jonahchua]

@@Airbuks thanks for the suggestions, turns out the pin was too long which caused the jams. I was wondering if it’s normal for the hammer to no longer free float when not cocked on higher hammer spring settings 16/2.5 and up? Thank you

[@FamilyFun183]

Hi! Do this probe work for pellets to? Or do i have to change to the regular?

[@Airbuks]

It works for pellets to but I prefer to swap if I shoot pellets

[@FamilyFun183]

@@Airbuks Thank you 👍

[@davidbrooks6811]

Love the videos,huma air

[@Airbuks]

🙏🏻

[@rmbprathnayaka2625]

I installed the tungsten hammerweight on my fx impact m3 gun but the gun will not load after that.pls help me

[@Airbuks]

Reduce your hammerspring tension

[@rmbprathnayaka2625]

@@Airbuks thanks ur rply.its work well

[@AEAMEXICO-USAInternational]

HUMA AIR IS THE BEST

[@AboveTheSystem]

What about .177 (4,5mm)?

[@Airbuks]

I have no experience with 177 , sorry

[@jasonknott8477]

Huma air

[@AlwaysCovered1227]

Do you install the transfer ports ?

[@Airbuks]

Yes I did 👍

[@SHShahab]

Hi, which word ? can you explain more please?!

[@Airbuks]

I have explained in the video 🤷‍♂️ there are some random letters hidden during the video that can be put together to make a word you need to put in the comments

[@sedatuzuner2280]

Formulation Power= airbucks+huma+fx formula results successful

[@Airbuks]

😂 thxx

[@Manavis36]

very good job guys!! 🌶👌🏼

[@Airbuks]

Thx

[@kevintravis2154]

great video. HUMA R

[@Airbuks]

Thx

[@AlwaysCovered1227]

I tried the Huma hammer in my M3 357 and it wouldn’t cock so I had to put the original one back in what can I do about that

[@Airbuks]

When the hammer and spring was in did you try to reduce the hammerspring tension to see if it would cock then ?

[@AlwaysCovered1227]

@@Airbuks no I didn’t today was my first time ever taking it apart and working on it

[@Airbuks]

@@AlwaysCovered1227 it is possible if you have to much hammerspring tension the hammer can’t go back far enough to engage the sear .

[@AlwaysCovered1227]

Okay thanks

[@AlwaysCovered1227]

@@Airbuks do I make that adjustment with the micro wheel or the macro wheel

[@robbypro3370]

I need one of these kits. HUMA R

[@Airbuks]

Maybe you will be the lucky winner ?

[@jonahchua]

@Airbuks Is the huma transfer port necessary to work with the huma pin probe or will the stock fx dual one work? Thanks

[@Airbuks]

The stock one will also work , the Huma one is just slightly bigger 👍🏻

[@jonahchua]

@@Airbuks thank you

[@nuangel]

HUMA AIR !!