Airgun Sunday GX CS3 4500PSI

gxpumpofficial.com/?ref=hbczrmyb
10% Off Coupon
SIXSHOOTERTEXAN

[@johnthompson3305]

Just bought this compressor and my first PCP Airgun AEA B&W S45…Thank you for the lesson, as I cannot wait to try this setup out!!

[@smithian4795]

How long does it take to fill your s45 with this compressor?

[@supergoat06]

I just got a GX L3 today. It's the 18v cordless battery compressor. I filled a 22ci 3000 tank in 8 minutes and my 68 ci 4500 tank to 4k in 35 min. For what it is it works well. I'll prob top off with 1k or so left in them just to cut down on fill times. These GX products are great alternatives to the various Chinese compressors that require some sort of cooling system. These things are quiet and don't get hot. Very impressed

[@garythompson8867]

What filter you using for moisture?

[@stevengoodman3498]

I've had mine for almost 2 years and it's still going strong! Best compressor I've ever had.😊

[@Crazy_Dave]

Very informative and you covered all the need to know stuff, great video.

[@bigdaddydoitall]

Impressive rifle. I just ordered this compressor myself. I could handle my discovery and custom build tube with a hand pump, but I'm not getting any younger and I needed a COMPRESSOR.

[@sixshootertexan]

Check my update video. Might save you some trouble. Thanks for watching.

[@bigdaddydoitall]

@@sixshootertexan ok what's the video title?

[@HobbiesHobo]

Good day SST, nice setup you have there. Mike.

[@WaschyNumber1]

A little tip for using pcp air compressors, close the bleading valve after you have started the compressor and are beginning to pump the guns tanks ect not befor, it's better for the compressor, becourse it can happening that it gets a vacuum back pressure or what it's called and it destroyes the compressor, this tip is nor from me but from a air gunner that have testet many compressors. It's cool that good pcp compressors getting more affordable.

[@sixshootertexan]

I mentioned not closing the valve until after starting the compressor.

[@ryanoutlaw9124]

I like mine. It takes three cycles to fill my AEA up to 4500 though.

[@jairorodriguez6713]

Can you shed more light on the paintball tank set up i want one but have no clue on how to make one or where to get one

[@sixshootertexan]

Ninja 90ci 4500psi Carbon Fiber Air Tank & Fill Station for PCP Air Guns a.co/d/0oQHFpL

[@Light_357]

The 5 minutes it took to fill that gun to 3k.....what was the starting pressure? What was the size of the air cylinder on the gun?

[@sixshootertexan]

The starting pressure was zero. The cylinder holds 350cc.

[@billypoynter6096]

Is it recommended to close the bleed valve after you start the compressor or before starting ?

[@sixshootertexan]

After you start the compressor. You don't want to start it underload.

[@rubenaguero7342]

How many times can you fill that gun with that big tank?? I have the western sidewinder

[@sixshootertexan]

👍🤠🇺🇲 8 times.

[@marktodd4479]

did you get grease in yours? i didn't have any and it is listed on the parts list. after 100 hours of operation need to "grease". do you happen to know what it is? just wd 40?

[@sixshootertexan]

No grease but I would think it's a silicone grease but don't quote me on it.

[@edwardharvey1954]

Great video. Do the fans pull air in and do some of the fans pull air out??? TIA

[@sixshootertexan]

Yes

[@ImmortalStrengthPowerlifting]

Is there any maintenance for the unit? Oil, water ect like many others? Cheers

[@sixshootertexan]

None according to the manual.

[@Jeeper1378]

Cant believe how quiet it is. Wondering about the lack of water separator. Is it supposed to do it without one and come out the tube on the side?

[@sixshootertexan]

It has a built-in water/oil separator.

[@Jeeper1378]

@@sixshootertexan how does that work?

[@jeffreyforth6442]

What is the story with your rifle? It's pretty sweet. Who makes it etc? Thanks

[@sixshootertexan]

I made it myself. Lothar Walter barrel, Timney trigger, Boyd stock.

[@rubenaguero7342]

What is that little clear hose sticking out on the bottom?

[@sixshootertexan]

It's where the bleed valve releases the air.

[@fredA1234]

Thinking of getting one. How is it doing today? 1 year later

[@sixshootertexan]

Still doing great.

[@hmody545]

How many minutes does it take to fill a 1 liter air tank from zero to 300 bar, and do you recommend filling it in two stages? It took me 15 minutes to fill from zero to 100 bar and I just stopped it

[@sixshootertexan]

I fill in 500psi increments. Let it cool completely in-between.

[@hmody545]

​@@sixshootertexan In your opinion, every 100 bar I turn it off until it cools down, then continue but how many minutes do I allow it to cool down and then continue?

[@sixshootertexan]

@hmody545 I hold my hand over fan, and when it seems cool enough, I start it up again.

[@hmody545]

​@@sixshootertexan Very good. Thank you for replying and giving me some time 👍

[@TonyGruber2009]

Hi, how long should you let the cool down fan run after filling up your air rifle?

[@sixshootertexan]

Depends on how long you used it. I usually just the airflow coming out of it for any heat.

[@TonyGruber2009]

Okay, thank you@@sixshootertexan

[@fredA1234]

I thought the fill air tanks they had to submerged in water?

[@sixshootertexan]

No

[@vtxdaryl]

Does anyone have any tips about my GX CS3 not putting 4500 psi into my Scott air tank? It only fills to 4000 psi and then stops, won’t go any higher. I have put soapy water on all connections and don’t see any leaks. Any ideas?

[@sixshootertexan]

This may sound strange, but mine would act like that if it was not setting flat on all 4 feet.

[@jwate]

@@sixshootertexangood to know, thanks.

[@timmy4539]

I have the same problem with my GXCS3 but it will only make 600 psi ! But leaks at all ! Can anyone tell me what might be wrong ??

[@ExelArts]

do you have a link for that blue device for every filtering?

[@sixshootertexan]

I now use this. TUXING 4500Psi Pcp Air Compressor... www.amazon.com/dp/B07KQVC5SZ?ref=ppx_pop_mob_ap_share

[@timmy4539]

I just found this video and i have to ask everyone i have the GXSC3 and it took a dump on me today ! I tried to fill one of my airguns but the compressor will only hit 600 psi now ! I checked it for leaks and found nothing ! It runs but it sounds like your hitting it with a hammer now and as i said it will only make it to 600 psi ! Any ldeas on what could be wrong with it ?? It only has 4 hr.s run time on it !

[@sixshootertexan]

Is it still under warranty?

[@timmy4539]

@@sixshootertexan nope ! This is the 3rd time it's took a dump on me and it only has 4 hrs run time on it !

[@rubenaguero7342]

You should fill the big tank grom empty, i wanna see how long it takes to fill. I wanna buy a big tank. I have that compressor

[@sixshootertexan]

👍🤠🇺🇲 I've done it. I do it in steps of 500psi. Time depends on how hot it gets. Need to let it cool down in between steps.

[@rubenaguero7342]

@@sixshootertexan do you think it'll fill the bigger tanks?

[@sixshootertexan]

@rubenaguero7342 I fill a 30 minute tank with mine. Same thing. Do it in steps.

[@rubenaguero7342]

@sixshootertexan will this tank work? I seen it on Amazon.... Gurlleu Carbon Fiber Air Tank, 30 Cu Ft / 4500 PSI, CE Approved, PCP Paintball Compressed Air System with Regulator Valve

[@sixshootertexan]

@rubenaguero7342 I think so. Just remember in the USA that bottle is not DOT approved. Only you will be able to fill it.

[@Ameirs]

Does this composer need oil or inside filter to change ?

[@sixshootertexan]

No oil.

[@Ameirs]

@@sixshootertexan thank you very much because i got new one and im not sure if there also filter inside the compressor that need to change after a while

[@leejepun]

Do you have a link where did you buy that tank

[@sixshootertexan]

Just search for a 90ci pcp tank.

[@fredA1234]

Great video by the way thank you

[@sixshootertexan]

👍🤠🇺🇲 Thanks for watching.

[@donwilson350]

Hey bud I got the same compressor you have there and it's got a oil and water filter separator built into the machine you don't need the other thing I've tested it and there's absolutely no water coming out of that and going into your gun I've tested it

[@sixshootertexan]

But double filtered is not going to hurt it either. Plus I upgraded that filter to a larger one.

[@donwilson350]

Yeah but you know the bigger the filter you put on that the more pressure you're going to put on that machine to push through it to put the air into your gun and that's not good

[@sixshootertexan]

But I'd rather replace the compressor than any of my guns.

[@obadiahsmith2345]

This compressor still running trouble free?

[@sixshootertexan]

I did an update a few weeks ago.

[@milkman5256]

Nice rifle and thanks for the info. I like the compressor seems solid.

[@fredA1234]

Great thanks

[@TheFlash-fh9zl]

Will it fill any air tank

[@sixshootertexan]

Not recommended for tanks.

[@billypoynter6096]

Will this fill 600 cc tank.

[@sixshootertexan]

Absolutely.

[@tonycarr1253]

I received my Brand New Compressor last week. I just used it yesterday (Saturday) for the First Time. Woke up this morning, and their was Oil on my garage floor. Made Sure To Follow Instructions to the letter. Replaced fill cap properly. And it Shakes Like An Earthquake, when filling Rifle ??? Help Please

[@sixshootertexan]

Send it back is all I can say. There's always going to be those bad ones after all they are Chinese.

[@rubenaguero7342]

Does it need maintenance?

[@sixshootertexan]

It's mechanical and all things mechanical need some form of maintenance. I will be doing a video on this soon. Thanks For watching.

[@fredA1234]

Anything I should know?

[@sixshootertexan]

I got a couple of other videos on it. Other than the one issue, it's been great.

[@fredA1234]

Great I will look for the other videos and thanks again

[@gunnwild1]

Those refillable air guns aren't a cheap hobby, are they?

[@sixshootertexan]

Support equipment is the killer.

[@kenlumhemang7654]

Too colourful yeah

[@timothytoler9065]

is this a Co2 generator

[@sixshootertexan]

No just an high pressure air compressor.

[@timothytoler9065]

@@sixshootertexan so i pretty much gota buy Co2 for my airsofts don't i... lol

[@charlesirby9222]

Sounds like an antique single cylinder 'hit & miss' engine... kzbin.info/www/bejne/m3bYe4JpmL6Xd6s

[@Letskeepthingsreal]

Shame on you for supporting the Chinese, you should have bought a Hills. The action on that rifle is ridiculously high, why ever didn’t you have an adjustable cheek piece fitted ?

[@spider0804]

Nothing like spending 3x more on something that does the same thing.

[@Vera-xu3xw]

Who made your phone? 🤪🤣🤣🤣

[@PeakyBlinder]

So to fill 7 litres to 3000 should be ok if done in two stages ? What you saying ?

[@sixshootertexan]

I've been doing 500 psi increments on my small tanks. I have no idea how big a 7 liter is. I don't do metric.

[@PeakyBlinder]

@@sixshootertexan ah ok, it's the next size up you the one in your vid

[@sixshootertexan]

Just keep an eye out on the pump temperature.

[@PeakyBlinder]

@@sixshootertexan will do, Liked and subscribed

[@PeakyBlinder]

@@sixshootertexan when I get mine I'll let you know.