GX Pumps CS4 Personal Compressor - Winterizing our 5800 PSI, bottle filling PCP Compressor!

This video on the: GX Pumps CS4 Personal Compressor - Winterizing our 5800 PSI, bottle filling PCP Compressor! has been brought to you by AirgunWeb and Gateway to Airguns - Learn more about our sponsors at www.airgunweb.com and www.gatewaytoa...
The GX Pumps CS4 water-cooled compressor is unique in a field of other personal compressors in that it can not only top off airguns but also fill pony bottles. And it does it for about $600! Most of the sub $1000 compressors can only fill airguns, leaving shooters with carbon fiber bottles without a way to reliably top them off. In our testing of the CS4 from GX Pump, we found it to be very useful in both tasks. Additionally, the max pressure on the CS4 is 5800 PSI which means that filling to 4500 PSI does not constantly stress the unit to its maximum capacity. In this video, we will show how we winterize our water-cooled units to help prevent them from freezing and damaging the pump and radiator. Let’s get started.
Amazon Affiliate Link to the GX Pumps CS4 Compressor: amzn.to/3I4iKd4
#GXPumps #CS4 #pcpcompressor #personalcompressor #airgunhunting #pelletguns #airguns #targetshooting #shootingsports #shooting #pcpairguns
Exclusive Behind the Scenes and Early Access, Ad-Free content NOW ON PATREON! - / airgunvideos and AirgunArmy www.AirgunArmy...
www.airgunweb.com - meet our sponsors
/ airgunweb - watch our content
www.gatewaytoa... - connect with airgunners worldwide!
AirgunWeb & AirgunWebTV Content Disclaimer: www.airgunwebt...
************************************
AGW / AGWTV Content Disclaimer
************************************
By viewing or flagging this video you are acknowledging and are in full acceptance of the following:
Our videos are strictly for documentary, educational, and entertainment purposes only. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. Treat Airguns as FIREARMS and observe all the same safety considerations as such. Any and all work on airguns should be carried out by a qualified and insured individual. We (including KZbin) will not be held liable for any injury to yourself or damage to your airguns resulting from attempting anything shown in any of our videos. These videos are free to watch and if anyone attempts to charge for this video notify us immediately.

[@AnotherJonDoe]

Unfortunately, there is no lubrication for the lower end of piston connecting rod, other than the grease when assembled from the factory. No way to keep it lubricated. I forsee lower end failure, unless owners periodically remove the piston rod end cap, and periodically lubricate.Time will tell.

[@GeezerGramps]

Can’t believe they didn’t put a drain on the cooling system so you could drain it when needed.

[@user-qw6mv6sw1w]

Bought the same compressor + Green Rubber Quick Connector Seal Rings for CS1-I/CS2/CS3/CS4 from the website direct with their coupon for 479.99 shipping included

[@DREKOWICK69]

that was a deal family

[@thomaskelly1228]

Thanks Rick that was pretty good.

[@heithwatkins]

Excellent video 👍

[@BrianB3788]

Thank you great video

[@RonBennett37]

Never run straight distilled water in these systems. Here is just one article on it, but there are hundreds of articles just like this. Personally I run G48 premix with great results.

[@slurpyman20]

Im using just distilled and mix with the coolant enhancers similar to water wetter or redline stuff

[@mikewilliams5635]

I used vp maddive cool down in mine athough I live in Texas!!!

[@deanbarrow89]

How do you top up the grease and what grease do you use ?

[@user-xs5gb3ry4g]

This unit is rated to fill up to 6.8 L bottles and has a 5 hr. run time. Filled my 3 L with ease from empty in 1.5 hrs.

[@phillipmendiola2100]

Awesome presentation and review !!

[@allanmingee9870]

I use RV Antifreeze year round in my compressors but still clear out lines when not using,gets darn cold up north.

[@nickmeinert6255]

Do you have a link for the digital hour meter you have on this unit?

[@AirGunWeb]

This one will work: amzn.to/3LwCvvQ Cheers AGW

[@nickmeinert6255]

Thank you

[@thefloorstalker6064]

Great info... thanks much...🤙🤙🤙

[@bertdefauw]

What filter do you recommened for the gx cs2 ?

[@mailee2224]

When r u gonna review the gamo arrow 29ft lb wood stock version?

[@LowkeyAirgunner]

This is exactly why they don't sell the summer windshield washer fluid out here 😁

[@MrPeterschmit]

Hey, isn't the unit with the internal inverter available now?

[@AirGunWeb]

It is! I would love to get one for testing. My original unit is still working well. I just use it for filling pony bottles. Cheers AGW

[@MrPeterschmit]

@@AirGunWeb 2 things- how long does it take to fill a pony bottle say 100 cc, and where's the affiliate link ? Thanks for your hard work good sir

[@AirGunWeb]

It takes about 1.5 hours to fill a 1L bottle from empty to full. It takes about 25+\- minutes to top one off from 3000 to 4500. No affiliate link right now. But we be adding them to our video descriptions as we can. Cheers AGW

[@MrPeterschmit]

@@AirGunWeb thanks again.

[@osvaldoborquez9201]

i got a prestone rv antifreeze but it says its flamable, its okay to use this? now im afraid the compressor explodes due to heating

[@AirGunWeb]

I would not use anything flammable. Cheers AGW

[@DREKOWICK69]

does anyone know how long it would take to fill a 4500 /77CI?

[@AirGunWeb]

77 cubic foot or cubic inch? Cheers AGW

[@DREKOWICK69]

@@AirGunWeb pretty sure inches. it's a paintball tank they call it a 77/4500ci

[@AirGunWeb]

@@DREKOWICK69- ok. So about 35 to 45 minutes. Give or take. Cheers AGW

[@DREKOWICK69]

@@AirGunWeb thank you. I might get one for my fill ups