AIT induction - Hot Air plastic repair - Collision Repair Line

Ideal for repairing and renovation of damaged bumpers in a very easy and fast way.
Product page:
www.ait-induct...
You can easy repair: car bumpers, plastic parts or interior parts, etc
HOT AIR allows you to carry out plastic welding using a jet of hot air that fuses the plastics strips that get welded and fixed together on the unit. Practical and easy to handle, it is fitted with a flow regulator. In this way, the damaged parts are welded together in a lasting manner, thus avoiding the expensive replacement of the piece.
Design: portable desktop.

[@vobinhthu5299]

This project is very good!

[@napieraustin]

We have one you use plastic sticks and stick it through a hot tip. Can actually make it look like a stack of dimes with it.

[@peterpunch1]

I use solder iron tips on hard cracked plastics. Hit it at 450 degree, go one pass deep/to the other end but not through, making a wake on each side. Do another pass folding the wakes down. Do a last pass to smooth out the surface. If you sand it it will look "like new" :-) Has never failed and done it like 10 times. Coolers, just cover parts and other stuff.

[@PinkPicasso21]

Soldering iron works just as well just prep the surface with some sand paper and use the tip of the iron to push little waves into the plastic about 1mm apart then lay all of them flat to join, i have used this method and its worked 100% every time even joining a motorcycle front mug guard together which was in 2 pieces if needed drill a few holes for some small cable ties to hold both pieces together and filler over them after

[@ahmedmalakai9753]

I know im asking randomly but does someone know of a trick to get back into an instagram account? I stupidly forgot the account password. I would love any tricks you can give me

[@ahmedmalakai9753]

@Keanu Rodrigo i really appreciate your reply. I got to the site thru google and Im waiting for the hacking stuff now. I see it takes a while so I will reply here later with my results.

[@ahmedmalakai9753]

@Keanu Rodrigo it did the trick and I now got access to my account again. I'm so happy:D Thank you so much, you saved my account!

[@keanurodrigo9887]

@Ahmed Malakai Happy to help :)

[@spearlordcb]

That's what I use, or sometimes a heat gun and flat head screw driver if you're planning on a complete refinish.

[@nickVeitch00]

O well in reaction to all the negative posts i can say this is a great bit of kit i bought one a year ago, much cheaper than a nitrogen welder for pretty much the same result " a good strong weld" This model appear to have bespoke design in the welder pistol as it gives of very little smoke in comparison to other welder.s This is a welder !! To create a weld one must melt the base material and fuse it with the filler rod, this is how plastic is welded the same basic procedure as welding metal. Though in this video a larger V groove, should have been created in my opinion. and the plastic should be cleaned with a pre cleaner to remove any contaminants. Some plastics polyurethane for example cannot be fusion welded and do following a procedure like brazing

[@albertokayvon5719]

Finally, here is a positive comment. Yeah, this is a really nice technique and easy to use but some idiots just don't understand.

[@PVCPVC-bo5bt]

플라스틱 용접 신기합니다. 좋은기술 보여 주셔서 감사합니다.

[@mariuscbf1000]

Hello. Please tell me where I can buy this material (white plastic).

[@Omgbroccoli]

It's not a plastic weldel. Plastic welder melts parts to join them together, and this thing, it's close to brazing, but not welding

[@gummel82]

More like glueing... but nothing like welding

[@Andersonbohar]

You ever seen a tig welder before?

[@Omgbroccoli]

Anderson B what's the point?

[@lambbosbread123]

colonel butthurt, i think the point was very clear.

[@Omgbroccoli]

lambbosbread which one?

[@tvpierce1]

Looks more like hot glue than welding. At no point did the body panel or the glue strip melt into each other. Not saying it won't hold... just that it's not welded.

[@aitinduction-poweredbyalba1207]

Dear Sir, we don't adopt a standard glue to fix it. We adopt specific kind of stripes accoridng to the kind of car body. As an example, we adopt PP stripes if the car body is made of PP. That's the best way to achieve a high performances in terms of resistance and durability. We "dig" a V in order to provide to the stripe more surface to be set in contact with.

[@AvtarSingh-vp3ud]

Sarya stick kahan se milegi

[@wzansari9232]

sir, This is hand welding????

[@Shadowcruise99]

How is that unit any different than a electronic hot air station? I would imagine that unit is significantly more than $400, which is the cost of a good quality hot air station capable of reaching temperatures of 500º C. BTW, your caption should read "without smoke or burning", not "without no smoke and no burning".

[@aitinduction-poweredbyalba1207]

Dear Sir, first of all we thank you for your enquiry. We have developed this item to be used with plastic stripes in order to repair the broken plastic car bodies. The unit is able to reach high temperature in order to melt properly the plastic stripes and do a proper job. We are not yet selling this product in the american market so we can provide to you any info concerning end user price list. Any suggestion is always welcome. Thank you for your attention. If you have any enquiry, feel free to send us an e mail. Thanks Albatros Team

[@suicidalkatt]

Inquiry**

[@reiniertl]

@ Shadowcruise99 I bet you get the same result with an electronic hot air station.

[@sevenodonata]

Enquiry

[@ppdan]

Lets make a cheap and very noisy hot air station, bundle it with some plastic strips and sell it for big money to car body repair shops

[@aitinduction-poweredbyalba1207]

Dear Sir, even if it's not a polite way to describe the tool, I assume that you are not aware of the cost of it. Concerning the noise, we have decided to record a realistic video without any music in order to show to the customers its real capability. I thought you might appreciate. The different kinds of plastic stripe ( PP,ABS, PUR etc ) may be chosen according to the kind of car body that you nned to repair and that's very important.

[@ppdan]

Info Albatros 300 dollars for a decent and quiet 1000W hot air station.

[@nikushim6665]

Just looks like repurpose solder reflow station. Its not a weld though, your not fully bonding or mixing the filler materials.

[@aitinduction-poweredbyalba1207]

Dear Sir, we use the same "material" of the car body in order to properly fix it. As an example...if the car body is made of PP, we use stripes of PP, if it's ABS, we use stripes of ABS and so on. That's the onbly way to get a high standard result and proper repair.

[@nikushim6665]

That has really nothing to do with my comment but oooook. o.O

[@devinwilliams3489]

@@nikushim6665 it is certainly welding. It isn't like other weldijg because its the exact same material being bonded by heat. It doesnt need to mix to be welding

[@rkaag99]

holy crap you really like the title feature in your editor

[@danijel124]

But why do you use than teeny tiny hot air attachment???

[@aitinduction-poweredbyalba1207]

Dear Sir, we want to "focuse" the heating in one specific point; we can regulate the ATM but the size of the "hot air" is standardized.

[@anuraag9190]

In india you can get it done from any body mechanic for INR100-INR200

[@sarvjeetbhaiking1460]

Machine ka price kya hai

[@madsl88]

John mounted the piece back into the car and delivered it to Andrew. After a couple of miles the piece broke again and crashed into the front window. Andrew died that same night.

[@ayoungdecoration9088]

👍👍👍👍👍

[@tronixfix]

Made in Italy? Looks more like the typical "made in china" case+ nozzle... can you open it up and show the inside?

[@harindudharmarathne9545]

This looks so similar to Chinese hot air soldering stations. Most probably a rebranded chinese

[@jahbrah3919]

waste of time.. use more zipties

[@aitinduction-poweredbyalba1207]

Dear Sir, by using the zipties, these may break and air may pass through.. By adopting the specific kind of stripe, like ABS, PP , PUR etc, you properly fix it, granting a high performance in terms of resistance and durability.

[@jahbrah3919]

Info Albatros dude just put some duck tape on that shit and call it a day

[@aitinduction-poweredbyalba1207]

Dear Sir, we are just providing specific infos and answers. I just thought you might appreciate that. If not, we do apologize but we don't switch our vocabulary neither minimize the will and pleasure to provide worthy reasons for such a tool to other customers.

[@jahbrah3919]

zipties look way cooler anyways

[@another1commenter770]

Zip ties are for rookies, rivets and tin sheet are were its at.

[@anghbalahr2971]

funny how the video ended short after you hear the sound of ripping plastic XD

[@aitinduction-poweredbyalba1207]

Dear Sir, the stripe doesn't rip. After every repair, in order to be able to properly paint, brush, cut it, we'd better wait at least 5 min.

[@XZAYLO]

how much does this cost? where can i purchase?

[@aitinduction-poweredbyalba1207]

Dear Sir, thanks fro yoru enquiry and interest upon our item. In order to support you, recommending you a reseller, could you be so kind to provide us more info of yoru location ? We thank you and await for your kind reply Albatros Team

[@XZAYLO]

I am residing in vancouver canada. What is the unit called?

[@aitinduction-poweredbyalba1207]

Dear Sir, thanks for your quick reply! Actually we have not yet distributors in your country. Could you be so kind to send us an e mail ? [e-mail] so it could be easier for us to interact. I thank you and look forward to write you back soon Albatros Team

[@TrionoBara]

👍👍👍

[@Viots]

lmao you start to hear it break then the video cuts off

[@aitinduction-poweredbyalba1207]

Dear Sir, we wanted to show the resistance of it. believe me, it doesn't break and the video hasn't been cut!

[@fixstyle9244]

Nic work

[@OLOLAK_7777]

its not got enough ur plastic welder.

[@aitinduction-poweredbyalba1207]

Dear Sir, in order to understand better your point of view, could you be so kind to xplain us the reasons of your point of view ? Thanks for yoru attention, we remain at your disposal Kind regards Albatros Team

[@عاشورالبعلي]

كام السعر

[@JBhighJeff]

made in italy i think its broken

[@MadMax-yq9ix]

This looks useless, just melt the plastic together, no scraping no strip.

[@aitinduction-poweredbyalba1207]

Dear Sir, if we don't "dig" a V in order to let the melted stripe flow inside, we don't achieve the same reult in terms of performances and resistance. We adopt the right kind of stripe for the specific car body. As an example PP stripe for the car body made of PP and so on..

[@zaproxy3366]

So basically its a gluegun

[@yagotitcovered5920]

Glorified hair dryer for numpty!

[@aitinduction-poweredbyalba1207]

Dear Sir, i't not a glue gun. We adopt the right stripe for the specific car body in order to properly repair it. As an example we adopt the PP stripe for car body made of PP and so on. That's the right way to achieve the high performances in terms of resistance and durability.

[@drvizeralkavokinstine5145]

pollymorph?

[@aitinduction-poweredbyalba1207]

Dear Sir, we adopt different kinds of stripes like PP, ABS, PUR according to the car body's material

[@justwaa8346]

lot of over engineering and waste of money for much simpler fixes

[@gummel82]

Do you even know the definition of welding?

[@rossthumann4996]

Its the joining of two or more pieces of metal.

[@buck19]

@@rossthumann4996 doesnt have to be metal.

[@PersonalTrainer2006]

Nice Asmr video . Haha

[@igotsth]

you know I bought my hot glue gun for 3 dollars. I am just saying.

[@aitinduction-poweredbyalba1207]

Dear Sir, the secret of getting a real high quality result is to use the right kind of stripe for the right car body. The "glue" is standard; we have different choices like PP, ABS, PUR according to the customer's needs.

[@RJ-lk5pj]

Who would tell someone they put hot glue on there vehicle and brag to someone who does it the correct way?

[@akilaperera6540]

@@aitinduction-poweredbyalba1207 hot air plastic welding machine how much

[@jeansonne100]

I fucking hated when you started scraping that plastic.

[@aitinduction-poweredbyalba1207]

Dear Sir, we wanted to record a realistic repair; that's the reason why we have not added any music / sound!

[@skorpius2029]

the sound is so cringy

[@skorpius2029]

why?

[@aitinduction-poweredbyalba1207]

Dear Sir, we attempted to create it in a realistic way. No music, no photoshop, just a real fix with its sound of tools.

[@skorpius2029]

i understand. i just described sound

[@looosemeat]

thats an expensive heat gun

[@aitinduction-poweredbyalba1207]

Dear Sir, we don't believe that it's expensive. You have to evaluate that we adopt different kinds of stripes for the right kind of car body in order to achieve a high performance in terms of resistance and durability.

[@SKAwaaz445]

Bhai mrp Rs kitna hai chahiye hame 7860854221

[@ciscodealmeida8541]

Gee man so much time to do a crappy job, pay me a months wage and my ticket i will come teach you the best way, faster,stronger and also teach you to do small pieces that you cant do with your equipment.

[@MegaDragge]

lol that was not how u do it :D

[@kitbutowski568]

Mucho pes para un pedasito

[@mangeshdali1043]

Contact no dijiye

[@devidaskasole692]

Hiiii

[@ashokpandey5842]

Aap apna Naam mobile number dena

[@stevenloggins1090]

Italy haha

[@victormartinez6959]

Tig

[@koukitalon497]

waste of time

[@MegaDragge]

hahahahahaha "expert" guys

[@informediatech-bruno5766]

Wtf get the fuck out mate noisy machine ....any electronics repair hot air gun will do better, you just need a bit of some other bumper to cut stripes

[@drmarcosmancini]

Araldite is faster better and cheaper!

[@aitinduction-poweredbyalba1207]

Dear Sir, Araldite is a special glue and reconnect broken spare parts! We do supply and melt the plastic stripes to join the broken plastic parts. Pay attention that we do supply different types of plastic like ABS, PP, PUR etc That's the main difference

[@annheron4181]

I use a glue gun, much quicker, easier and cheaper!

[@aitinduction-poweredbyalba1207]

Dear Ann, the glue is a standard solution. We do supply the right kind of stripe for the right kind of car body. As an example the PP stripe for the car body made of PP, the ABS stripes for the carb body made of ABS and so on. Some we use the same material for reparining.

[@nick9198]

and also 1000x more inferior, you forgot that part