Mini Air Compressor Restoration.

[@soulbrothers7789]

Awesome restoration without voice or crappy music !

[@philliphall5198]

Funny looking wash pan and fluid level Lololo

[@hilyeli]

Loved seeing you use the oil can that you also restored

[@yeagerxp]

Well done 👍👍👍Thank you for sharing. Take care of yourself, be safe, and healthy 🇨🇦

[@gerardohumbertocastano8240]

Que exelente tutorial paso a paso así si se aprende felicitaciones👍

[@johnwooldridge9994]

Nice little restoration my good man. Would definitely like to see your approach on restoring the Briggs and Stratton next.

[@AJRestoration]

That's the plan haha probably be the same color scheme as the compressor for the fun of it.

[@donparker8246]

@@AJRestoration Great idea. I'd love to see that. 😁

[@rbyaldrzee6657]

Beatiful 👍🏻💯💯

[@MarkMeadows90]

Another good restoration sir. I laughed at the part where you raised the manually operated press machine back up. Squeaky noises! The dolphin sounds coming from the air compressor were funny as well.

[@f9qo]

Beautiful job! Any idea what the max psi spec would be on an old pump like that, say if you were setting a pressure switch accordingly?

[@albertojimenez7950]

Excelente vídeo

[@dannyhenson3141]

Very nice restoration

[@Vermllon]

Great video ! especially for eng students.

[@slimwantedman6694]

Good morning from Southeast South Dakota

[@AJRestoration]

Morning buddy!

[@oneshotme]

It looks great and you did a wonderful job restoring it as well!!!! Enjoyed your video and so I gave it a Thumbs Up

[@andymiller5611]

Nice work, fella! Good work! 👍

[@DrMrSmooth]

Nice restoration mate . Keep going. 👍

[@randomprojectstube]

Great job again 👌

[@AJRestoration]

Thank you so much buddy😀

[@manuelsoul1]

Ottimo lavoro maestro, complimenti 👍👍👍 👍👍👍

[@clementeoliveiracardoso3779]

Parabéns gostei muito de vê como vc trabalhar. De todos os videos de consertos de máquinas em Geral. Vc no convenceu. Que vc e igualmente a mi nos consertos de máquinas onde eu trabalho.

[@Antonio_Pereira]

Muito bom trabalho 👍

[@RichToff-b6s]

Shouldn't you be pushing on the outer rings of the bearings and not the inner?

[@AJRestoration]

Yes that is advisable, if the press fit is really tight pressing on the inner traces will damage the bearing.

[@anibalruffolorie720]

Whitch kind of oil you use to refill the compressor???

[@AJRestoration]

Compressor oil. They sell special non foaming oil for compressors. Every hardware store should stock it.

[@raimundopacheco64]

Buen trabajo gracias por enseñar a hacerlo

[@kayagon]

nice restauration, love that color.

[@richardluce775]

A brake wheel cylinder hone would have done the trick. Leslie still makes one I think.

[@AJRestoration]

That is a good idea actually.

[@philliphall5198]

I bought 6 extra for grand sons just incase

[@balamfashion]

Wonderful

[@stephenpaul9165]

Beautifuly done!

[@tedschmaltz4346]

Nicely done.

[@JimFinlayson]

Awesome video. Thought I was going to miss the filling with oil and use test when you did the turntable show of the results, but you didn’t disappoint.

[@tomswindler64]

Nice video,clean and simple project,you saved the pump for sure.just keep doing your thing and carry on.kudos 👍👍👍😎😎😎

[@AJRestoration]

thank you for the comment, I appreciate it!

[@re-fix9678]

i like video👍👍

[@Biokemist-o3k]

Did you zinc plate the items that you pickled?

[@juanpulido5191]

Buenos días, solo tengo una duda. Que no es más fácil lavar todo antes de desarmarlo? Claro me gustan tus videos, pero es una duda que tengo.

[@RestorationAustralia]

Well done. 👍

[@Canuck014]

Great work, I’m interested in your chrome process and was wondering if you would share the detailed information on the chemicals used and quantities. Thanks for the awesome content

[@Canuck014]

Sorry, I just found your video on this process. Thanks again

[@AJRestoration]

No problem :-)

[@1islam1]

@@Canuck014 🔴 What Is Islam? 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him. More ....

[@wanchaibuasorn8194]

สอบถามครับ ผมทำความสะอาดปั้มลมพูม่า ตัวเล็ก กรณีที่ถอดล้างถังทำสีพร้อม ประกอบ😊😮คืนดีสร็จปั้มไม่ตัดครับ มีวิธีแก้ไขอย่างไรครับ

[@leossmallengines]

15:25 don't do this to your bearings! press on the outer sleeve only!

[@AJRestoration]

Noted, thank you!

[@andrewgrace4410]

Beautiful restoration and color

[@coski87]

ugh, it was a little painful watching you press those bearings pushing on the inner ring, otherwise excellent video!!

[@AJRestoration]

I know, I did no have a large enough socket to fit the outer ring.

[@alpharaptor7510]

I want to see a video of you rebuild that Briggs and Stratton engine on the air compressor

[@AJRestoration]

I am torn between the Honda and the Briggs.

[@philliphall5198]

Me to

[@philliphall5198]

Both then.

[@dheerajparmar1408]

हमारे कमपेशर में जिस तरफ से कमपेशर हवा खिंचता है उस तरफ से हवा निकलती हैं क्या करें हवा का स्टाक नहीं रहता है

[@ramonmanzur7634]

Muy bueno pero no mostraste como pusiste los aros ?

[@josecarlosbueno1163]

Boa tarde tudo bem você pode né ajudar o compressor de ar esse modelo só que é mais grande tá saindo óleo com água no rezenvatorio ou tamque

[@DeanG55]

I have always wondered and also asked why the original casting marks are usually removed upon restoration? Are they not part of the originality that is the main goal of your restorations? Love the site, please keep the videos coming!!

[@AJRestoration]

I just reduced the casting marks, some of them were quite ugly. They were not completely removed though. I like to leave some history and originality.

[@zadabjlil2281]

@@AJRestoration 👍👍

[@andrewcollins7783]

Nice job.

[@pedroluizandrade5227]

Maravilhoso trabalho!!! Nota 1000

[@chinaagressor8082]

Интересно посмотреть на белого монстра на заднем фоне момента с работой. Что за компрессор?

[@glennmoreland6457]

How come you pressed the bearings back in on the inner race...? 🇬🇧😐

[@AJRestoration]

Because I can. Hahahaha Chaos is my friend, chance is the result. But forreal, I did not have a socket (or anything else) large enough that would fit the OD of the bearing, also the friction fit was minimal so I took a chance pressing the ID of the bearing and in this case, it worked out great. (not recommended I know)

[@glennmoreland6457]

@@AJRestoration Ok 🇬🇧😐

[@micbanand]

I believe it is a milking pump :)

[@外贸必备YouTube运营实]

看起来很有趣，视频做的很好，产品很不错，👍

[@RixtronixLAB]

Nice video, thanks :)

[@thanvi.s847]

Sir compressed air is cold or hot?

[@AJRestoration]

Both in a way, as the air is compressed it gets hot, and as it enters the storage tank it cools down. Usually, when the compressor works for extended periods the air feels lukewarm but won't reach really high temperatures.

[@thanvi.s847]

@@AJRestoration ok sir

[@deurydiaz8130]

Cuánto de presión levanta cuánto Hp es ?

[@darrenmoon8330]

Would like to know make model number of that little compressor.

[@arindamseal9659]

Sir, Can the compressor run in both direction?

[@AJRestoration]

Yes, you can, but running it in reverse for long periods of time can cause the compressor to overheat.

[@mitallerperu2306]

Buen trabajo de mecanica quedo muy bien, 👍👍👍

[@jerryjosephrojerryjoseph9966]

Sir ano ang nilalajan na oil nya sir.

[@eliasmarquesrodrigues9822]

Meus parabéns, pelo excelente trabalho!

[@AboyAboy-ee5po]

Bang itu ring sehr nya ukuran berapa

[@AJRestoration]

Saya tidak punya ide.

[@cosh7670]

عمل جيد ورائع لكن ماهي محاليل التنظيف

[@philliphall5198]

Only thing is how hard it is to get parts and hours of looking

[@AJRestoration]

That is true, its really hard to find parts sometimes.

[@CARLOSRODRIGUEZ-om9xf]

Cómo hacerle mantenimiento aunó así pero de Dos pistones

[@tk429]

Use a brake cylinder hone.

[@ricardofrassoni963]

Vi limpieza y pintura nada de ajuste y rectificación

[@edsonpereiralopes2326]

Excelente

[@saboningm]

Genial 👏👏👍👍👍

[@jamesfield5346]

Thank you for not spending a butt load of time on the media blasting. Don't get me wrong it's cool and all but it doesn't take long to get the gist of it.

[@Globaltalentgt]

Awesome

[@ЕвгенийВысоцкий-м2и]

Не энаю как к вам обращаться но благодарю что ответили как с вами созвониться .?

[@andymiller1803]

If the Daleks had a prehistoric ancestor, I think this is it. 🤪

[@marcosfernandodasilvaandra2700]

Belíssimo trabalho... Parabéns...

[@SpitfireMkIIFan]

14:50 Those bearings are not going to last long...

[@AJRestoration]

They are fine. The friction between the housing and bearing OD were minimal.

[@JavierMendoza-is3ks]

Dnd consigo uno d esos lo quero

[@CesarIvan-sp2ln]

Papalotes mucho amigo

[@chakravarthiartsandadverti9559]

Nice

[@AJRestoration]

Thanks

[@ronwalsh]

Make new gaskets. They are like .01 cent to make.

[@AJRestoration]

The original gasket is still good to use. No need to fuss with new gaskets.

[@omarobandoramos4848]

Exelenre gracias...

[@Saifayman-lr9yn]

من فضلك المكونات وطريقة التنكيل ضرورى

[@marianasaravia2385]

Quería saber que problema puede tener si pierde aceite

[@trackcclo]

感謝分享!

[@icedog75]

Original paint is in such good shape you might have just clear-coated and saved it....only original once.

[@AJRestoration]

I hear what you say. I jus could not handle the iriginal paint job, overspray everywhere.

[@praveenemirates561]

Compressor price

[@AJRestoration]

?

[@geraldocarmo7412]

Bom muito bom

[@fhanoradolfogarciabuitron8555]

Super...😜👍🇨🇴

[@AJRestoration]

Thank you! Cheers!

[@tiopatinhas8250]

a maneira de colocar o rolamento esta errada nunca forçe um rolamento pelo anel do meio para nao danificar o rolamento, procure se atualizar e nao cometer este tipo de erro serio.

[@jorgevallejos3948]

DE LUJOOOO 10

[@austinhughes1924]

Please restore the motor next! It would probably make it better.

[@AJRestoration]

I think the Briggs is next yes.

[@anggarrahudhi8403]

please review your sand blasting machine, I'm interested in making one like that, thank you

[@LoftechUK]

Thant’s cool

[@bernardsantiqueengines3128]

Doen die Briggs ja. Hoekom nie haha

[@AJRestoration]

Ek dink ook noggals die briggs.

[@jorgeojeda5954]

casi perfecto eso se llama ingiereria

[@laebdangrs4274]

👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾

[@MariaGomez-hu7sz]

❤❤

[@mahandarsinghranawt1516]

Monday mini compressor chahiye

[@razakrazak4710]

سلام عليكم صديقي عمل چيد من الجزائر

[@ehabelbakry8872]

how Mach HP

[@AJRestoration]

69

[@aldocesar3599]

Y PORQUE??? Y porqué no cambiaste las juntas ???(Iba todo BIÉN!!!¡ Lo raro es que no habia desgaste en el perno del piston ,En el Perno* Rectificar es ESO.(¿¿¿???)

[@mohamedzelekha1469]

فنان

[@hilyeli]

Loved seeing you use the oil can that you also restored

[@damarcastro768]

👍👍👍