Full gasket set / Juego de juntas CITROEN C4 16V ET3J4(KFU) .

Subscribe 👉 👉 👉 bit.ly/3eL19Hq
Improve your knowledge about mechanics. In this video you can see, Ajusa full gasket set installation for the vehicle/model CITROEN C4 16V ET3J4(KFU). Our mechanic explains step by step how to carry out the repair on a real engine.
👨‍🔧 We answer your questions or queries in less than five days.
---------
Aprender de mecánica es muy sencillo con los vídeos de Ajusa. Hoy te mostramos cómo realizar el montaje del juego completo de juntas de un CITROEN C4 16V ET3J4(KFU). Nuestro mecánico te explica todos los pasos que tienes que seguir para realizar el montaje completo.
👨‍🔧 Nuestro departamento de asistencia técnica contesta a tus dudas o consultas en menos de cinco días
More information / más información:
🌐 www.ajusa.es
🖥️ / ajusaspain
📸 / ajusa_automotive
#ProffesionalMechanics #MecánicaProfesional #Mechanics

[@AjusaAutomotive]

💥 #New VIDEO - Engine sealants | Sellantes para el motor 👉👉👉 cutt.ly/jyyj7Jc

[@user-jd2ew3kx7m]

Super vidéo

[@user-jd2ew3kx7m]

Tres bonne video

[@tuigaahching9191]

Awesome job

[@AjusaAutomotive]

Thanks so much :) You can follow Ajusa novelties in our social media: @Ajusaautomotive. Best regards

[@Valedaar]

Dear Ajusa, please keep doing videos like this. Thanks to it Ive replaced head gasket in my KFU engine by myself. After 2 years and 35k km all still works perfect. Thank you again and all the best in new year 2018 for you guys! Cheers!

[@AjusaAutomotive]

Thank you so much for your comments! We really appreciate it! You may keep updated about all AJUSA news on Facebook: facebook.com/AjusaSpain and www.ajusa.es

[@ssharkkkkkk]

Hi Jan have you had our cilinder head skimmed if yes by how much and have you used ajusa head gasket with regular thickness 1.4mm ?

[@Valedaar]

@@ssharkkkkkk Hi. Yes, i did skimming. Engineer says he done once or twice as head was pretty good after removing from engine. And yes, I have used 1.4mm gasket but not sure now if Ajusa.

[@ssharkkkkkk]

@@Valedaar Thanks for your answer

[@gicugigel3790]

@@AjusaAutomotive how did you tighten the camshafts pulley's screws without the camshafts to rotate?

[@cristianolibarinus2875]

muito bem executado esse trabalho parabéns ....

[@AjusaAutomotive]

Muito obrigado! Uma saudação

[@ThreeGeees]

very well detailed, thanks.

[@AjusaAutomotive]

Thanks a lot!!

[@t.8152]

Супер! Просто молодец!

[@AjusaAutomotive]

Спасибо за ваш комментарий. поздравления!

[@georgezhgenti9981]

super

[@miitsaras7]

nice work

[@AjusaAutomotive]

thanks a lot!

[@DobermanDoggy]

Сальники распредвалов установлены не верно, их не нужно заганять до упора, а нужно чтобы были заподлицо с головкой. Иначе они перекроют масляные каналы.

[@AjusaAutomotive]

Сальник установлен правильно. Сливы слива масла не покрываются, как вы можете видеть на следующем изображении URL. поздравления The oil seals are installed correctly. The oil drain holes are not blocked, as we can see in the following image. media.motorteiledirekt.de/media/catalog/product/P/2/P221003614876875222017-02-21.JPG You can find more information in our Facebook facebook.com/AjusaSpain/ and in your Twitter twitter.com/Ajusa_Spain. Best regards

[@kassiotelemaque4597]

Bonjour je sui français et je sui sur un moteur indentique à celui là pouvez me dire que veu dire 2kpm ? Et esque au 3ème serrage vous serez tous les vis à 120 ou juste quelque vis ?

[@AjusaAutomotive]

Bonjour, ce que nous indiquons comme KPM sont des kilopond-mètres. Et en ce qui concerne le serrage angulaire, la 3ème étape doit être de 120 degrés pour toutes les vis. Salutations et merci

[@rodshoveller1494]

Hi, great video. Can you tell me how you held the cams when you tightened them.

[@AjusaAutomotive]

Hi! You need a special tool to block the cams. Kind regards

[@ssharkkkkkk]

Hello, In the video I could see that you have had cilinder head skimmed. Does Ajusa offer head gaskets with different thicknesses for this engine, or only 1.4mm thickness ??? Than you for reply.

[@AjusaAutomotive]

Hi! For this motor, we do not offer different gasket thickness. Despite this, we can slightly rectify the cylinder head according to the workshop manual. Attentively More information: 🌐 www.ajusa.es 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/

[@mohamedtorneur607]

Bonjour

[@pradelilo6101]

Beau travail beuno :-)

[@AjusaAutomotive]

Merci pour ton commentaire. Nous sommes heureux que nos vidéos peuvent aider. Vous pouvez suivre toutes les dernières et l'industrie AJUSA automobile dans notre Facebook et Twitter facebook.com/AjusaSpain/ twitter.com/Ajusa_Spain. Salutations

[@pradelilo6101]

+Ajusa super mon Frere c un MECANICO en Espagne et moi jai un titre profesionnel reparateur auto ;-)

[@kristofvanoostende6645]

super film !

[@AjusaAutomotive]

thank very much!!

[@y2quakzzz988]

Hi, got an question with the Hydraulic lifters. When you put those in, are they solid hard or did they have some clearance in the lifters?

[@AjusaAutomotive]

Hi! If ther are fiilled of oil the will be solid hard. If they are lose some oil, they will have some clearance. Best regards 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/

[@y2quakzzz988]

I know that but when do you need to put those in the cylinderhead. When they are filled with oil or when they have some clearance? That is my question.

[@AjusaAutomotive]

@@y2quakzzz988 You can install them in any state, charged or not. When you start the engine, the pressurized oil will charge the lifters. Sincerely 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/

[@rusancomart1640]

👍👍👍👏

[@kiril6544]

What is the black sealant he use for the crank case?

[@AjusaAutomotive]

Hi! It is our RTV sealant called AJUSIL. Its part number is 75000100. Kind regards. 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/

[@regee90]

is that copper grease you put on the head bolt threads?

[@AjusaAutomotive]

Yes, we put grease copper on the head bolt threads and also at the end of the thread in order to improve the tightening process. Best regards

[@Hamza.234]

10:07 - 10:50

[@mieczyslawm7093]

Wymianę uszczelki jeszcze mógłbym przeżyć, ale za cholerę nie mam pojęcia o rozrządzie, a głupotą było by wymieniane uszczelek a nie wymieniane rozrządu za jednym razem.....

[@AjusaAutomotive]

Przepraszamy, ale nie rozumiemy Twojego pytania, czy możesz mi wyjaśnić? Pozdrowienia We are sorry but we do not understand your question, could you clarify it. Greetings

[@mieczyslawm7093]

@@AjusaAutomotive I just complained that replacing a gaskets is not that difficult but I do not know anything about changing timing belt and replacing the gaskets and not changing a timing set would be just stupid...

[@AjusaAutomotive]

@@mieczyslawm7093 Well, we always recommend changing at least the timing belt, since it is handled during gasket replacement. We hope to have helped you with this video. Best regards

[@JJSmith1100]

There is no way that intake manifold was torqued down before fitting the cam boxes. If the intake manifold is fully bolted down there is no way to get the inlet cambox in underneath the manifold.

[@AjusaAutomotive]

Hi Johan! We did the job as we indicate in this video. Therefore, it is possible to assembly the rocker covers with the intake manifold assembled. Best regards 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/

[@lkkjhtemmexv1838]

what a super shitty engine