AK 7.62x39 Wolf Velocity Test - Pistol vs Rifle

[@davidrussell8783]

When choosing a caliber for my AR "pistol," intuitively I chose the 7.62x39 with a 10.5" barrel. This presentation gives me empirical evidence that I was too busy to collect on my own. Thanks.

[@bmiga]

Great work brother! I've been looking for analysis like this for awhile.. those mini jack's look sweeeet.

[@bluesbondsman]

Would like to see what an 11.5" barrel would accomplish with various 7.62x39 My guess is that it would be very close to the 16"

[@MarkBadia]

The closes in size is the AK104 which has a 12.4" barrel. And I do agree it would be nice to see if you have all the performance of the 16" barrel in the 12.4" barrel which I believe is the case, so, is it worth adding a couple of inches probably yes unless you want to shoot suppressed and not it is 8.5 inches with the 2.4" of barrel and 6" of suppressor and not you are losing a lot of the mobility the mini provides.

[@pd5156]

Nice one! I wish You made decibles difference as well! Also any chance for accuracy comparison between these two at 100 yards with scope?

[@s00-x2h]

According to Paul Harrell, when you have duplicate chrono readings it means the chrono had an error. He just throws out the 2nd reading and takes a 3rd shot to get a different reading, idk

[@earth7551]

Disagree

[@eddiecrow9133]

125 grain soft point is ass, 154 grain soft point from Tula is where it’s at, that round is devastating flying out’ve a 10inch Ak.

[@docb1844]

That one dude who always wants the 200 yard range to himself (usually he is 200 years old, walks 1 mile per hour, and wants to pull / change his targets every 3 shots. AAAAAAAAUUUUUUUUUUGHGHH 🤬

[@Boomerfootball1]

Great video! Need some more cheap ammo long range shooting videos during these times lol

[@TacticalAccountants]

You’re going to love our next video then

[@pitekw12]

@@TacticalAccountants Really interesting comparison. Where did you get that short gas tube rail for your mini?

[@TacticalAccountants]

@@pitekw12 I cut an Ultimak M1-B to fit. I believe the Ultimak rail for the KP-9 is the perfect length out of the box.

[@danielmilewski7659]

Great job! 👍 thank you for your hard work. 🙏 This is really helpful! ❤

[@fatjeezussouthtexasoutdoor5244]

I was on the fence between 7.62 & 300aac for my Retro Colt Commando-style pistol build.....ended up going 7.62. When it comes to most bang for the buck, nothing comes close.

[@mr5below078]

16 inch Ak is just for importation and legality the sweet spot for ak is 12.5 to 14 inches

[@touofthehighplains]

Vz58's>AKM pattern. If only 8v3 or 8M3 effect were available right now at decent pricing.

[@austinedwards5888]

Love the 8m3

[@Swampytheroot]

I have a few cases of S&B 123gr SP and a dozen cases of Norma 123FMJ. Lots of steel case stuff, too. I have maybe 500 192gr S&B SP subs. Wonderfully adaptive round. Tell me about this MiniJack. Never seen it's like. What's the brace? Did it come as such? Or did you add it?

[@rifleman7313]

Just wondering if the forend on the 10" AK was hydrodipped or how you got a woodgrain finish on what looks to be a polymer forend as I was wanting to do something similar. Thanks.

[@phambelton1]

Nice work. Here in ammogeddon, mind telling us non-AK guys how much per round one would expect to pay for the round you chose as your new home defense choice? Thx

[@TacticalAccountants]

I paid 46 cents per round for the Soft Points in April

[@dangerousfreedom4965]

Do you have a video on the fakelite furniture?

[@TacticalAccountants]

I didn’t do it myself. There is a guy on Reddit by the name of BananaClipazine who offers fakelite coating

[@dangerousfreedom4965]

@@TacticalAccountants what did it cost? Looks great on the vid.

[@TacticalAccountants]

@@dangerousfreedom4965 Believe it or not, $60 to coat handguard, grip and 2 mags

[@lytening79]

The "Please don't shoot my dog" was great and I liked accordingly.

[@MarkBadia]

Thanks you this was an excellent video and you may have changed my mind on going with the 16" Jack but instead going with the Mini Jack, but I am thinking about going with the Milled receiver version they just came out with versus the stamped version.

[@JoeWayne84]

Milled be better in a full barrel length for sure it’s going to be heavier and offer slightly better accuracy . You won’t really notice the difference as much in accuracy with the shorter barrel just the weight difference mainly. Personally I’d always go the opposite and if I was mounting a magnified optic to a AK I’d get a milled receiver if I was going with a 1x red dot or holographic sight a stamped receiver will be as accurate as the optic will provide anyway so you won’t benefit from it. I own both options and my favorite AK pistol I own is a Zastava mpap92 with a eotech it’s the perfect 100 meter and In tool.

[@MarkBadia]

@@JoeWayne84 Hi South, thanks for your reply. I'm just curious as I was also considering the mpap92 and they are certainly more available. You said you own both, did you mean own both a Mini Jack and a mpap92 or a milled and a stamped receiver AKs? If you have both a mini jack and mpap92 why is your favorite the mpap92? I am trying to decide between the Mini Jack, the Draco (12"), and the mpap92 if I go short barrel AK.

[@240SSONLY]

great material man, super informative... Can't wait to buy a Mini Jack

[@Captured-On-Camera-Reviewer]

Would would better than 5.45X39 in a 10 inch barrel and way better than 5.56 in a 10 inch barrel?

[@Odin31b]

What about out of a 5.5" barrel?

[@procyonia3654]

7.62x39 needs 7.5" to get good powder burn, you start to have large drops in velocity once you go below 7.5

[@davidduafala3050]

Excellent work.

[@NCrdwlf]

Nicely done .

[@Lonestar-zn2ym]

Where did you get the fake lite?

[@procyonia3654]

What brace do you have on the Mini Jack?

[@spets4265]

Looks like a CNC Warrior

[@nomad155]

Wait wait, where the crap did you get 8m3?!

[@andymorales6907]

Most likely acquired 2-3 years or so ago.

[@dougshelton69]

Wolf HP will do the job...make larger splash on impact...

[@mikewatson1517]

What stock is that for the pistol?

[@TacticalAccountants]

CNC warrior brace. We obey laws on this channel

[@mikewatson1517]

@@TacticalAccountants Sorry I misspoke. It's a sick brace so I was immediately interested.

[@chudriiqbal3874]

I love mine jack gun pls tell me price in u.s.dollars .

[@TacticalAccountants]

Mine was $839

[@danielh5397]

Good content

[@gangsterairsoft1493]

Tactical accountants🤣🤣🤣love me some merica

[@joquin4618]

1st for the algorithm

[@TacticalAccountants]

in.xls

[@ZanyAnus]

You bubbad 2 beautiful European rifles. Why 😔

[@spets4265]

This isn't 1948. Even Russians run EOtech's on their rifles. Besides, it's not milsurp so who cares?