Akko ACR Pro Alice Plus | Incredible value, Incredible sound

[@kralekis]

that mic difference is just MINDBLOWING

[@CatchiestWorm12]

I'm kind of impressed with how good those stabs sounded, even stock, especially considering they're plate-mount

[@BastinTheVoiceTalent]

Appreciate your video! Replacing the silicone gaskets with D65 gaskets was a great modding tip. Just did it last night and I can say poron is better than silicone for sure.

[@DinnoKeebs]

HOLY CRAP THAT INTRO WAD INSANE

[@YBBK]

Haha thanks! Came up with the idea while in bed 😂

[@DinnoKeebs]

@@YBBK it’s always the bed or the shower

[@detockz]

I've been on the fence about committing to this board for a while and your video just popped up in my feed today. This video was so well made and pushed me over the fence and made me decide it's time to commit and purchase this board. The video was so well made and answered any question I had about the board, so for that I thank you. Unfortunately I cannot watch any of your other videos for fear of them swaying me into buying more stuff. (Just kidding of course)

[@YBBK]

😂glad I was able to be of help, hope you enjoy the board!

[@iambored110]

sick intro, love the centered framing and slight wrist adjustment at the end !

[@YBBK]

thanks! came up with the idea in bed lol

[@PhoenyxTTV]

that intro was rly cool

[@balasquin]

that intro was awesome by it self! earned a subscriber

[@neogem200]

With it restocking tomorrow I am really considering it as my first alice board, but at the same time I feel that maybe I should wait until july 5th for the keychron k8 as it will solve the issue of south-facing sockets and lack of via while also adding a hefty full alu case albeit at the higher price point of 200.

[@YBBK]

I believe you mean the keychrom q8. It looks like a great board! I can't help you decide as our preferences, needs, budgets are different. But what I can say is that you can't go wrong with the akko alice, its an amazing board overall!

[@neogem200]

@@YBBK Yeah my bad the keychron q8 is what I meant, but after watching your vid and others I think I am going to stick it out for the q8 the 70 dollar difference I think is justified going from Acrylic to alu, plus not being restricted to long pole switches or using non-cherry keycaps will allow me to use every switch and keycap set I have with no chance of interference.

[@YBBK]

@@neogem200 Nice nice! Just keep in mind that the $200 price is for barebones not a full kit. So realistically the difference is closer to $100. Not to mention the expesnive shipping the keychron has. Still a great choice though, just wanted to point it out.

[@neogem200]

@@YBBK well I’m going to buy it from divinkikey they are affiliated with keychron and offer free shipping so don’t have to worry about that plus I would have replaced the switches and caps anyways so that didn’t factor in my decision making. If Akko sold the board barebones for around 80 or 90 bucks then I would probably buy both lol

[@YBBK]

@@neogem200 Ahhh okok I see!

[@MichaelMorikawa]

Awesome dude. I just put in my order for this on the restock this morning. Thanks for the comprehensive sound tests in different configurations.

[@YBBK]

Nice! Hope you'll enjoy it!

[@keebs3605]

that was literally the coolest keyboard intro i’ve ever seen!

[@maxonsky7572]

what a lovely intro!!!

[@obentoubako]

The value is actually crazy! I know what board to buy if I want an alice now I guess

[@darreno7651]

insane intro, gives mkbhd vibes!

[@YBBK]

haha thanks! that means a lot :)

[@TIB1243S]

Amazing effort! You deserve more views from the effort you put in for all the different configurations, definitely. Although I think you forgot to mention the lack of a second "B" key in the FancyAlice and also YMDK Wings (for some reason the extra "B" key mattered to me a lot more than north/south facing sockets xD) Though Keychron just announced the Q8 which ticks all the boxes! Let's see how that one would turn out!

[@YBBK]

Thank you, it means a lot! And yes, thanks for pointing out the extra b key difference, I should have mentioned that! Keychron q8 does look super promising, hopefully Ill be able to get my hands on one lol

[@TIB1243S]

@@YBBK if it's open for orders I'm definitely snagging one too, my current Alice board is a Gothic70 which I bought as a way to try the layout and it seemed pretty easy to adapt

[@lawrencetchen]

An absolutely 🔥🔥🔥🔥🔥 intro!

[@Salamiel]

Dang, when i saw that intro i instantly hit like holy jeebs

[@Brenrys]

Great video, but I gotta say I was dancing to the intro. I love stranger things

[@firstchushingura]

Gusy try this keyboard I have it. With CS Jelly Black Switch Lubed. The stabilizers do not rattle at all... I place Akko Cream Keycaps MDA profile and the sense is incredible! I haven t feel such a great experience with something since the SNES... Haha

[@maxmouse3]

Stock sound is great! Very cool keeb!

[@FunkyHQYT]

Can't wait for mine to show up! I've been really wanting to try and Alice board lately!

[@newearth9027]

Love the thumbnail!

[@YBBK]

Thank you!

[@rndm89]

im looking at one of these for my next board. seems like a great option for when i'm writing long papers and want something more ergonomic.

[@YBBK]

Yes! I can definitely say that the alice layout does make typing for long periods of time more enjoyable

[@stripedsweater520]

I just purchased this I can’t wait for it to come, it’s such a good value especially if you like keyboards but you now tryna spend crazy on all the supplies and Keycaps etc…

[@YBBK]

Nice nice, hope you like it!!

[@jaz3115]

intro is sick

[@cdavid0624]

Incredible intro.

[@breynard1168]

cool intro dude

[@Seenana_blythe]

WOW! Thanks for your sharing, It' so helpful

[@tileychannel]

this video came just in time, was planning to buy one later this month :D

[@YBBK]

Highly, highly recommend it! They have more options now too!

[@ricecake915]

nice intro man

[@tinytuna0]

looooove the intro!

[@NORAliaayu]

Love!!

[@toll5320]

Was highly considering one of these, but the lack of freedom was a massive no for me, not a fan of the crystal switches or the Keycap set. For anyone wanting a case kit built almost identically for super cheap check out the fancy tech Alice 66. Basically identical board but stack instead of solid plastic. Gasket mounted and all for only like 75usd

[@YBBK]

At the end of the day what suits you best is the best! I also did a comparison with the fancy alice near the end if you missed it :)

[@toll5320]

@@YBBK oh damn, think I clicked offa little early. Gotta watch All the way through now lol

[@subpario]

the barebones kit is back in stock rn

[@Cnamonn]

No right B tho...

[@ALT-HEX]

It's a decent build. However, it has some kinks. I couldnt get the switches to sit correctly, even after rebuilding it several times. So my right and down keys needed longer presses. its an ok beginner Alice, but I recently upgraded to the Feker Alice 80 and its miles better.

[@WoollyMittens]

Screw in stabilisers don't fit through the plate openings. The top case doesn't have screw inserts so the plastic will strip after opening it a few times. Otherwise the board punches way over its class.

[@YBBK]

As I mentioned, screw in stabilizers with thinner housings should fit fine, I've tried it before. Also, I do agree that without any screw inserts, it is less durable, but after opening and closing the board 10+ times for the video, I did not notice any looseness or stripping.

[@nomz1134]

damn nice intro

[@jammies701]

Great video. Really not a fan of the keycap legends though, but they are quite nice for being included

[@YBBK]

Thank you! They are definitely excellent for a prebuilt

[@tuffski3798]

Insane

[@projeckt1948]

the only problem with the fancy alice that it only have one B

[@Fish-fu7ge]

Mine only came with one plate, pc. But it did come with an extra daughterboard, tape for tape mod,, and a stainless steel weight. The weight kinda looks ugly though tbh.

[@YBBK]

Yeah the weight definitely isn't for everyone 😂 I believe the spare aluminum plate only comes with the barebones kit version and as you mentioned, the pre-built comes with others accessories.

[@mcjgg-]

Hello I just got this keyboard cause I was sooo convinced after this video. The thing is, I lost the wrench/screw driver thingymajig that opens the screw thingyies. Can you please let me know what replacement tool I should buy? Thank u!

[@YBBK]

Its called a hex key/Allen key and should be pretty easy to find online or at a hardware store. I'm not sure of the exact size, but usually they come in packs including various sizes.

[@Ratipat332]

Can you recommend any other ergo keyboards I could look at? :) In any price range.

[@YBBK]

If you want a more premium option, check out the upcoming keychron q8! Basically fixes all the issues i had with the akko alice and comes with an alu case. Around 100 USD more

[@armita611]

I know this video is about the ACR Pro Alice but I'm more than a little obsessed with the sound profile of the keyboard at 0:18 seconds. It kind of sounds a bit like the Loki65. At first I thought it was an Akko 5075s but looking at your videos is it the Feker IK75? Any chance you remember what switches and keycaps you were using on this at the time? Thanks! Edited to correct keyboard comparison name, I meant the Loki65, not the Link65.

[@YBBK]

Yes it is the feker ik75! That config was using holy feker pandas, Akko blue on white ASA, PE foam, Tape mod, modified case (to allow for proper gasket mounting) and tuned durock piano stabilizers. Probably one of my favorite sounding builds so far lol

[@armita611]

@@YBBK Got it, thank you so much!! I'll have to go watch that video and see if the modding is something I'd be up for. I've been in the mood for a true modding build for a while now. The actual commercial kits are great and I love them but sometimes refining the sound of a cheap board is much more satisfying.

[@polarspalace]

How do you get the frosted version? I don’t see that option, only spray paint

[@Nukunyx]

I cant lie, i kinda want this but i damn well know before watching this video that i would never be able to afford this

[@kaptmart]

QMK/VIA is not a big deal to me. As long as there is a robust software (even proprietary), I'm good. I just download the software to remap some keys anyways and forget(and uninstall) it after.

[@christianrickabesamis7670]

can you move the fn to the caps lock key?

[@polarspalace]

How do you get transparent case

[@dannyhu8462]

🔥🔥

[@quocphuvu1604]

i'm still wonder that does akko pc plate support pcb stabs. That one issue is the reason why i'm hesitate to buy the pro alice.

[@YBBK]

Yes it does! But, as i mentioned in the video, stabs with thicker housings like the durock v2s, will need a bit of tweaking as the fitment is really right. However thinner stabs such as equalz, kbdfans or akkos own should have no issues at all

[@stuartsheppard321]

What lube should I use for crystal switches any recommendations

[@YBBK]

205g0 on stems and 105g0 on springs

[@forreigncarrot235]

Have you tried using TX stabs on akko board? Tried using staebies but it wont fit on the plate. Are c3 my only option aside from akko screw in stab?

[@YBBK]

Hmm, I haven’t tried fitting tx stabs with the plate. I’ll get to this in a bit! But otherwise, yes, for sure the c3 and akkos own will fit. I believe kbdfans stabilizers should fit too

[@danielranleesoria9609]

My Akko Alice came with gasket jackets and socks as well (both silicone). currently using the socks. do you think changing to poron gaskets will improve the sound and feel of my board?

[@YBBK]

Yes, definitely! I highly recommend you change them.

[@YBBK]

Restocking on June 18th with more colors, switch options and a weight. All sound tests side-by-side: kzbin.info/www/bejne/aanVcmiteat1oLc

[@gable1997]

I need to know the details on that mod005 build

[@YBBK]

Its using L+F gateron CJs, durock stabs, PE foam only, FR4 plate. Video coming soon where I pimp it!

[@S85B50Engine]

Is it me or the standoffs don't really do anything on the board? When I put them in they would offer no support to the plate when I tried building it withoug plate foam.

[@YBBK]

Ah is that so? I didn’t try it so I wouldn’t know. But I did notice that the stand off, even after tightening, were considerably loose

[@S85B50Engine]

@@YBBK If you put them on without any plate foam or silicone, they literally do nothing. That's why I removed them, because if they don't do anything might as well get rid of them and have a little more flex.

[@Brenrys]

Do you have any idea when akko are releasing their DIY alice kit?

[@YBBK]

I was told sometime in july, probably end of the month. It’s supposed to have a nice weight

[@shinden5393]

They've just released a barebones version today. Already bought one lol

[@knotsable]

Nice video, but dude, slow down a bit

[@YBBK]

Haha yeah, I tend to speak really fast 😅

[@ricey3952]

does anyone know if akkos other prebuilt boards dont add those case feat in the build? Specifically the ACR Pro 68.

[@YBBK]

I believe the acr pro 68 is the same as the alice pro. The feet are optional

[@ricey3952]

@@YBBK thankyou, love ur reviews btw, just subbed. High production quality, ur underrated asf.

[@realnotscripter]

can u do one for the acr pro 75?

[@YBBK]

I'll look into it!

[@jervisdumaliang1315]

why does mine don't have the extra polycarb plate??

[@YBBK]

Did you make sure to check all the packaging? If so and you still can’t find it, you should reach out to akko to ask about this issue

[@jervisdumaliang1315]

@@YBBK thanks I'll try to contact them!

[@YBBK]

@@jervisdumaliang1315 lmk how it goes 👍

[@acob6159]

With the gateron cj's, were they lubed or stock?

[@YBBK]

Lubed and filmed

[@acob6159]

@@YBBK I just ordered an akko alice but I didn't see anything about the shipping time to the u.s. do you know what the shipping is like if you're in the u.s?

[@YBBK]

@@acob6159 Standard Shipping should take around 2-3 weeks Express Shipping (usually dhl) should take around 1-2 weeks

[@koshin5842]

Can this type play games with typing?

[@YBBK]

It’s just like any other keyboard, as long as you get used to it, you should be fine!

[@koshin5842]

@@YBBK thanks :))

[@0mni924]

I'm confused with this board is there a spray painted version?

[@YBBK]

Yes! The one I have on hand is a translucent one but they offer spray painted white as well. The new ones also come with a weight. I was told a black version would be coming soon as well

[@0mni924]

@@YBBK Awesome. Where is the option of getting the spray paint? I didn't see it anywhere on the site.

[@YBBK]

@@0mni924 On the sale page, under where you chose the “switch” it also allows you to choose the color as well. There should be three different options: Transparent with clear switches, Spray painted white with clear switches and Spray painted white with silver switches

[@0mni924]

@@YBBK Okay awesome, thanks!

[@bynnyin3126]

the macro of this keyboard is not good on Mac

[@YBBK]

Ah really? I don’t use mac lol, would you mind sharing why?

[@bynnyin3126]

@@YBBK The shift key in the macro does not work on Mac. For example, I map `fn+a` to `{ShiftDown} {a} {1} {ShiftUp} {b}`. It will output `A!b` correctly when pressing `fn+a` on Windows, but it output `a1b` on Mac.

[@YBBK]

@@bynnyin3126 Ahhh I see, I’ve only really thought about simpler shortcuts cuz i’ve heard those work fine. Hopefully there can be a software update date to fix the issue!

[@spects2263]

Have you considered purchasing FancyAlice66? A lot of people comparing these two because of how cheap (yet good) they are. I'm thinking of getting an Alice keeb but I don't know which one I should get.

[@YBBK]

Please refer to 16:06

[@spects2263]

@@YBBK nice. I'll just buy both😂😂

[@HardwareAddiction]

I can't recommend the Akko tbh. It's nice, but has too many annoying issues. North-facing PCB so there's interference, locking you to Akko's own Cherry sets or having to swap out the switches for switches that do not have interference. Then, no actual feet. All of these acrylic Alice/Arisu keyboards have stacked legs to complete the keyboard. Then, there's the software, which is terribly bad, slow, and full of bugs. The key puller I got was badly molded/constructed, so I don't use it. The cable you get with it is also cheap looking and has this toy vibe.

[@YBBK]

Interesting to hear another perspective, I agree with some of your points and totally respect your opinion! However, you have to keep the low price in mind. There are obviously going to be some trade offs here and there to cut costs. I'd say over all its still an amazing board despite these issues. More and more switches/keycaps are coming out that support north facing sockets so its not completely restricted. Also, if you compare the accessories eg. the cable and switch puller you mentioned, to other kits at this price range, I doubt you'll find any as complete or quality as akkos. Yes, the coiled cable might feel/look cheap, but I'd say its much better than the ones offered on lets say, a vn66, gamakay, or other diy kits such as the mw65.

[@viktigboy1976]

the ?ref doesnt work in the link, so when you click it you don't go to the referral link

[@YBBK]

Thanks for letting me know, I have fixed it now. Does it work?

[@luisfontinelles5834]

nice nice niceeee review

[@melissavu2001]

right when i was determined to spend money on a much needed violin bow 🥲 why do i have expensive taste in hobbies

[@YBBK]

😂 you should definitely get the violin bow first!