In Win 303 , (one) of the cleanest water cooling Gaming pc time-lapse build.

[@hoyle038]

I really like this build. The colours you picked a super clean. Good job.

[@VistaPanoramicabyLello]

Beautiful AF!!! Congrats!!! Regards from Brazil!!!

[@DJshadowXD]

Very nice build and good production of the video well done!

[@patrickegan8866]

That is cool. I can only dream...

[@IamLastKings2049]

I have the same PC case and I want to install bottom fans, and I cant because the plugs in the motherboard are in the way. Great timelapse and setup

[@cwadeh1]

This is good. I've been inspired by the same guy that's inspiring you. Well done.

[@Lando6969]

That looks sick, one day im gonna own one like this. GG bro beautiful masterpiece.

[@henrykerim4410]

Awesome time lapse, finally a diferent channel, congrats bro!!

[@brucepapuni5372]

So entertaining to watch. Well done.

[@juliashenandoah3965]

This watercooling system is absolutely stunning beautyful! But after having lost one PC because of a watercooling leak on the CPU connector, I prefer classic air cooling now.

[@aldenroswell8504]

N o i c e, that looks so clean. Amazing job

[@Kaiser_XIII]

Daaaamn! You weren't kidding when you said this was clean! It's fucking spotless is what it is!

[@WombatMuffler]

I don't know a ton about building computers, even though I built my own, but DANG this is one sick build, nice work.

[@b3ice]

Great looking build!!! Looking at using this case for my next build.

[@teazqt812]

Amazing work! I will be doing my first loop in this chassis after several months of homework. I'm using an itx mobo so I will have plenty of space inside to put a rad at the bottom. That res is beastly!

[@anihaven7995]

is there really no intake fan for the sake of the cleanliness??

[@felipemagaz1717]

The bottom fans are intake

[@anihaven7995]

@@christianbildstein1047 yeahh it looks like it

[@billlumbergh2103]

The bottom fans should be intake, if not you are setting it up wrong...www.inwin-style.com/media/gaming-chassis/303/20180221075407_50854.pdf

[@LyK0sa]

Yeah, that always gets me with these KZbin builds, 100% negative pressure just so that you can see the prettier side of the fan. I guess it doesn't matter since these builds are rarely used and usually get immediately dismantled, but it still bugs me

[@FNXDCT]

it's looking so good :O

[@stefanramage1660]

so every fan is blowing the air out.. how do you think air will come in the case?

[@zeyuzha6657]

easy, open the plate hahaha

[@Lyle-km1lf]

It’s probably for show

[@Danth01gt]

The inside of the case isn’t a dang vacuum...

[@GB3770]

Differential air pressure???

[@ilyakhodkin700]

Fans under gpu must be installed on other side

[@yahyaali658]

Where should they be installed I am noob trying to learn

[@Westopia]

crazy build. i have the same case.

[@brillywilly2998]

Where are the intake fans?

[@colbybarbour9990]

on the bottom

[@brillywilly2998]

@@colbybarbour9990 bro 2 years later and I’ve built my own pc in that time lmao

[@MrNaigel80]

simply beautiful!!!!!!

[@BundymaniaReviews]

Nice rig ! I like the LED colour scheme

[@AKTechMods]

Thanks for the comment. I like also your shares.:).

[@rajaahmadfarhan4485]

Hi there. If possible can share what is your loop order, looking to build a custom loop with this case too.

[@envit0o]

Awesome build man! Where r u from?

[@ЕвгенийЗеленский-б5г]

beautiful

[@natejohnson1991]

Only a true gamer applies thermal paste like this

[@jasonwu7461]

Gorgeous

[@RodDonnelly]

Bit late to the party, but what connections are you using and how many are actually needed? want to go liquid cooled but want to make sure I don't over or under buy the required items

[@zulukzululk6163]

Can I buy full set of parts incl. case? Oversea parcel possible?

[@azecece1]

Hello do you sacrifice SSD emplacement with distroplate ?

[@sharlinespinal3287]

Full hypnotic effect kicks in at 7:50!

[@miraculix9103]

is there any chance to hide the pump at the back?

[@epicchris89]

But i have this case my own what is if you close the hole system? Mine gets to warm if i close the backside off it. I mean you are blowing warm air from inside throught the radiator. Could you answer me?

[@rohanhalder9371]

5:36 what is it called? He didn't use any water block on gpu. What is it called where the fitting are inserted? And where can i get it?

[@klaussapplesauce8136]

Perfectly fit

[@yop5349]

It's wonderful!!

[@aiden2359]

just curious but why isn't the GPU power cable routed from the top instead from the bottom?

[@ha3mster684]

want to have it its glorious with project snowblind in the front panel top notch

[@green4envy660]

block was custom?

[@Grebe90]

nice build but that airflow must be crap with no intake fans

[@Dobido52]

Yea don't know why he has the bottom fans exhausting when they should be intake I'm using this case for my next build too n that's how I'm having it 3 intake at bottom and 3 at top for exhaust

[@leandroferneles5942]

@@Dobido52 it works if you have all fans pushing air out , then it creates a vacuum and the vacuum puls frash air

[@leandroferneles5942]

it works if you have all fans pushing air out , then it creates a vacuum and the vacuum puls frash air

[@RobertD_83]

@@leandroferneles5942 it works but creates a dust nightmare. Ideally you want slightly positive airflow to encourage dust to not creep in through crack and seam. And being that he installed fans in the factory mounting locations, he'd get a slight bump from convection as well.

[@leandroferneles5942]

@@RobertD_83 i agree that

[@abdullahfahad2006]

‏(وتولني فيمن توليت) إذا تولاك الله سخر لك كل شيء ولو كان في نظرك مستحيلاً

[@peteward8559]

How good it the pre fit barrow water cooling gear so easy looks nice

[@chrismarshall1358]

What brand fans did you use?

[@AKTechMods]

Aigo c5 rgb fans with manual controller.

[@Thevolcomice]

only exhaust fans?

[@joeykido1450]

Are the PSU conectors the same as normal Seasonic Conectors? I want to combin cablemod cables with the PSU but the device is not officialy supported.

[@AKTechMods]

They are the same. Ask to cablemod's facebook page they are responding quickly.

[@kimjongskillz9511]

I have a wireless mouse plugged into the front usb 3.0 which works fine, but when i also plug in a usb hard drive in the other usb 3.0 on the front case then the mouse stops working or becomes very laggy. I tried a couple different mice and usb stick combos and this happens when both r plugged in as well as data transfer. Does this happen to anyone else/is my case defective?

[@Birbeh]

Lol I can see why you cut the video at 7:49 :P did you get a lot of spillage?

[@spazzjunk]

Where did you get fans with those logos in the center?

[@markissboi3583]

look up google :)

[@spazzjunk]

@@markissboi3583 I tried and they all had a different logo

[@BlackSnow-b9m]

how did he get his fans to look like that?

[@UltraVert]

Man that's awesome there is a distro plate for this case.. I have the MSI version. Wish you could still install the 3rd intake fan tho :(

[@thibaudvanderschrick922]

Nice build, but why not go triple/duo intake on the bottom ?

[@carlosjames6157]

How much didbit all costs?

[@rathahonnidiabo6117]

What did the entire build cost you?

[@kool1dence162]

What does it cost

[@lePoTo51]

TAKE MY MONEY ! I BUY IT !

[@jovana7784]

where did you obtain that reservoir ?

[@AKTechMods]

Aliexpress. See the description.

[@peteward8559]

They are barrow google barrowint you will see them they do a lot for popular cases cheap too

[@Innoox]

Am I right? You take warm flow from graphic to the processor?

[@sebkorsnes]

Loop order doesn't matter with the exception of this: the reservoir should always flow into the pump so the pump doesn't run dry. Here is a good video on it: kzbin.info/www/bejne/iJ-zc5KnapacjM0

[@basti6819]

Whats the price of this?

[@mad2223]

is that Thermaltake Pacific Flow Indicator 2?

[@eeiean]

Mad222 it’s a barrow. It’s aluminum so don’t use it if you have copper or nickel rads/blocks

[@Tommy-lm7iv]

Ok, so nice build but where is the intake and why so many fittings. The performance is probably lowered majorly.

[@juanmiguelrocha6260]

Would the waterwayboard work for a ryzen cpu? It says its only comaptible with intel cpu and the boards indicated on aliexpress. Just wanted to make sure before i buy

[@AKTechMods]

Depends on which brand your cpu block is? Let me know and i check it out

[@juanmiguelrocha6260]

@@AKTechMods Would definitely purchase a Barrow CPU Block for my ryzen. Can you let me know if it would work with ryzen? Then if not, could you let me know a reservoir that would fit the in win 303? Many thanks my man.

[@AKTechMods]

@@juanmiguelrocha6260 I can recommend you the cpublock in the below link. The g1/4 holes are in a vertical position, which most probably is compatible. The reservoir height must be under 200mm. In that case you use ddc pump separately, then i can recommend you to get 130-150mm reservoir. You need to then dismiss 1 x 120mm fan from bottom of the case. Tell the formulamod my greetings:) www.aliexpress.com/item/Barrow-transparent-acrylic-CPU-waterblock-0-3MM-microcutting-micro-waterway-for-AMD-LTYK2A-03/32710756337.html?spm=2114.search0104.3.18.639e3b01oHeobb&ws_ab_test=searchweb0_0,searchweb201602_4_10065_10068_319_317_10696_10084_453_454_10083_10618_10304_10307_10820_10821_538_537_10302_536_10059_10884_10887_100031_321_322_10103,searchweb201603_2,ppcSwitch_0&algo_expid=48b91aa5-8d1b-4812-a4b8-2cd3af72eb25-2&algo_pvid=48b91aa5-8d1b-4812-a4b8-2cd3af72eb25

[@ImCalvinTam]

I'm new to custom loops and I would like to mimic this build in my Inwin 303. Can someone help me compile a list of the proper fittings for this build. I'm looking at 4:57, but have trouble calculating the number of fittings and the name of each part. Love the build. Keep up the good work.

[@동우류-g9u]

What is that fan's name?

[@AKTechMods]

Aigo c5 with remote control.

[@1dakikadakarakalem]

Good job 💛

[@ivoruiter6605]

Do you get the watercooling gear sponsored? I would like to order some barrow gear but the shipping just (almost) doubles the prices. So fittings become pretty much just as expensive as f.e. ekwb in my country..

[@AKTechMods]

I haven't applied for the sponsorship yet. Were you residing? EU or U.S.A?

[@ivoruiter6605]

Eu. The netherlands

[@AKTechMods]

@@ivoruiter6605 Je kan die barrow produkten bestellen door die ebay.de /mizucooling. Hij verzend vanuit england naar Eu .

[@ivoruiter6605]

Daar is het nog erger volgens mij. Rond de 6 euro verzendkosten op alle fittingen

[@ivoruiter6605]

@@AKTechMods i am confused. You don't speak dutch or do you? Anyways i did not get a reply on my dutch comment so ill just try it in english. It is even worse at ebay.de/mizucooling. Pretty much 6 euros shipping on every barrow fitting..

[@felix7120]

if i'm completly new to watercooling, how much must I spend to geht a waercooling setup with my am4 chip

[@AKTechMods]

For the average build approximately 300-500€ for cpu, gpu blocks, water pumps, fittings and tubing etc. Don't spend more then that.

[@felix7120]

@@AKTechMods could you say me which parts you would chose

[@AKTechMods]

@@felix7120 write to me the components you got, and i try my best to guide.

[@felix7120]

@@AKTechMods got an r5 1600 16gb crucial ram b350 msi board and a rx 480

[@aldenroswell8504]

@@felix7120 you might also want to invlude your gpu, unless you dont want to cool it

[@niconona6417]

Hey first off all very nice work I ll recreate this. I have one question, where did you get that distroplate from and if you made it by yourself is it possible that you upload your cad template to copy it. Thank you very much.

[@jovannibaeza191]

that one is from barrow. in my build, ill be using the one from bitspower

[@ardui-soft1637]

The bottom ventilators are in the wrong direction...

[@DavidSanR]

thats amazing, how much does it cost to build a watercoling system like that? aprox.

[@themitrylife]

Can You Include All The Parts Used As I Have The same case please

[@mikhaeldebruyne1312]

Hi !! I was looking how people manage they're watercooling with that case then i found your video is amazing really liked it !! But yeah i planed to use Gigabyte Aorus withe that case ( my prefence ) but they say it's only compatible with z370 chipset ? and asus :/ do you know other waterway boards ? or could dis one work with an aorus z390 ultra ? thx for the video !

[@AKTechMods]

You just need a cpu waterblock that matches to the distroplate. Take this cpublock as reference from aliexpress (LTYK3-04). No need to worry about motherboard.

[@mikhaeldebruyne1312]

@@AKTechMods Oh nice thx !! i'll watch

[@tonybalognamacaroni3402]

Pls don’t use aliexpress, especially for water cooling. It’s cheap garbage, with little of something long lasting. Don’t take my word for it if you want to pay for all new parts...

[@hoodlumnano2986]

I want to do hard tubing so bad but Ik I’ll fuck it up

[@mobarakjama5570]

😻

[@kingbrosas8458]

nasa mag kano po kaya yan ? pasagot naman po ng tanong

[@gidderman]

Wow the comments... Just wow

[@Bigpike.225]

magnifique👌👌👌👌👍👍👍

[@WarriorPleb]

i love the look of builds like this but knowing my luck, leaks will happen all the time and it'll just be a waste of money. I'll stick to the classic air cooling forever

[@harkamal_kooner]

Hello sir huge fan of your work I just wanted to ask how much does this entire thing costs and if I send you the money can you build it for me please ??

[@AKTechMods]

Hi! Thanks for your interest. I put the links of the parts in the description. i don't take custom orders for now.

[@harkamal_kooner]

@@AKTechMods I can't find all the water-cooling parts i can't find any full kit from barrow. please let me know it's total cost aswell . Thanks for reaching out

[@AKTechMods]

@@harkamal_kooner It's hard to calculate the total cost. Prices are changeable. You can buy from the sellers i have already shared in description. They sell also as a complete kit. Just get in touch with them, then they sort it out.

[@harkamal_kooner]

@@AKTechMods ok brother thanks for your time and you seriously build the best looking PC I have ever seen !!

[@MrMxguyver]

White concept

[@No_Transitory]

You made that look way to easy lol

[@GPStuntMan]

Lol do you buy thermal paste at Costco?

[@장어진-v9j]

It's wonderful...I want got it...may i have money

[@yiyun4285]

这是什么风道？

[@edios300]

Omg

[@GeorgeD1]

PSU at the top is so 20th century...

[@AKTechMods]

Welcome to the past:).

[@BIOSKillerBIOSKiller]

И снова пылесос!!!

[@longboredterrie]

This radiator is blocking the power supply intake fan, that's not good, don't do this.

[@GB3770]

Can u run crysis 3 on that? Lol.

[@renanhenrique5493]

First like ....Brazil !!!!!

[@markusbraunholz2220]

why the hell is almost every build video i klick today a white build... i got this in mind so long but now this just feels boring to me to do it anymore -.- But a good one get a upvote from me.

[@ryanthibodeau124]

5 bucks take it or leave it

[@snpzdrdarky2181]

It will be so unfortunate if he finds out motherboard is broke...

[@markissboi3583]

🤵2019 🎤NICE PC - I BuilT A PC 3 stage Apollo like rocket 🚀< 🤪 and wanna launch it into space near a satellite the wifi & internet b like100% Only thing is ? i cant repair any damages if hit😳 dam you space rock 1 hit & 37mph im dust then told mite crash into other satellites cause a change rection up in Space the BILL 4 damages be like💲 12 trillion $ eek ok NO launch Bad 🙄 hjaa

[@Альберт_Кронштейн]

Нижние вентиляторы стоят на выдув... 🤦‍♂️ Ещё и ССД на двух полосочках говноскотча.

[@Toomanywelps]

PC porn!

[@elstukov]

good video horrible and LOUD music

[@luisz172]

I'll give you $1250 for it! asap!

[@RecordingViper]

360mm for cpu and gpu??????? hahahaha