That is an amazing efficiency you got from that motors...i didnt expect them to be that good
@MyRazerZone4 жыл бұрын
Thanks! And cheap too 😁
@MyRazerZone4 жыл бұрын
Thanks! And they are cheap too 😁
@blackterminal3 жыл бұрын
Hi could you tell me what app is used to project the white areas you wish to cover in a video? Thank you
@heggy_fpv4 жыл бұрын
nice! can you share your diff please? approaching maiden too
@MyRazerZone4 жыл бұрын
Hi. It was stock arduplane diff before autotune. I'll take a screenshot of the new diff when I got home from work 😉
@heggy_fpv4 жыл бұрын
@@MyRazerZone for some reason I assumed this was inav, sorry :)
@MyRazerZone4 жыл бұрын
Initially, I got it flashed with Inav Changed my mind and continued it with arduplane 😁
@EnglishTurbines4 жыл бұрын
Ratel is my current favourite too...What power levels were you running the R9M at...?
@MyRazerZone4 жыл бұрын
It is on Auto>1W. For some reason, I am experiencing shorter range on the R9mm. Currently researching if I can flash the new OTA ACCESS R9Slim+ with old firmware if it will work with my old R9M module (non ACCESS)
@EnglishTurbines4 жыл бұрын
@@MyRazerZone Yes, well running 800mw at 1280mhz on your plane won't help your R9MM reciever...I can easily do in excess of 6kms using just a 200mw vtx at 1280mhz... Trouble is, they are getting harder to obtain these days....If I use my EZUHF, it can handle an 800mw vtx easily...Guess you are running 915mhz on the R9?
@rodeopilot74953 жыл бұрын
Great video, finding recommend 1300kv motors, Do you think you have enough thrust to hand launch ? And what’s the minimum cruise amps?
@MyRazerZone3 жыл бұрын
Definitely! 2508 or 2807 1200-1300kv and pair it with dalprop 7x5x3 or 8x4.5 and you will have more than enough trust to hand launch easily. 60-70kph cruize Amp should be aroun 5-8A
@rodeopilot74953 жыл бұрын
Sorry my question was about the motors you’re using the sunnysky 2212 980kv , that’s what you are using right ? Do you like those or would you use different ones?
@MyRazerZone3 жыл бұрын
@@rodeopilot7495 they are just spares from previous builds. Used them on the albabird just for the maiden and a few flights. I have already replaced them with brotherhobby 2510 1030KV with 8X6 APC props on 5S3P Li-Ion
@AriffRentapFPV4 жыл бұрын
Very nice footage even though from a dvr
@MyRazerZone4 жыл бұрын
Thanks! I have now 3 osd screen to switch inbetween. One is clear without OSD so I can enjoy the quality of the Ratel. Amazing cam . Thinking of putting another one on the vertical stab and a cam switcher. Happy flying! I Love your albabird and the decals. Amazing videos.
@wingsmh274 жыл бұрын
Amazing, how can you achieved this type of fpv osd clear video. I got line and dots all time on 5.8 ghz with LC filter 🙄
@wingsmh274 жыл бұрын
Happy flying ✈️
@MyRazerZone4 жыл бұрын
I have a low esr capacitor on the ESC and power leads on the VTX 😁