Hi, Thanks for sharing! Have you done any modification to mount the 3115 motor on the mini-talon? Or it can be used directly? Moreover, do you recommend the extensions for the mini-talon?
@kadegreen53565 ай бұрын
Inspiring footage, but arent such long flights illegal? Ie you need to visivlbly see the aircraft and have a spotter?
@JesterR-ps4uj8 ай бұрын
hi fellow pinoy geek here. just checking on you. saan ka ser sa Pinas?
@thomasmcadam6424 Жыл бұрын
Thanks for posting this. Do you know what the take-off was with the big battery?
@ledyjun Жыл бұрын
may kasama ako dito sa italia na naka chat mo daw tungkol sa hobby natin. ako ay taga Dagupan pero sa ngayun nasa italia pa. next year 2024 akoy pensionado na at babalik na ako sa pinas for good. pwede bang na contack ka just for our hobby? Rc plane.
@trumblez Жыл бұрын
I want an easy to throw plane that can go about 80-120km on a big batterie, wich of these is the best: Mini Talon Mini Skyhunter (v1 or v2?) AR Wing pro How fast it goes doesnt really matter to me. Or do you have an better suggestion than the ones I listet?
@trumblez Жыл бұрын
Great editing, what vtx and antenna for ground and air did you use here, your video reception was so amazing
@fndfpv3678 Жыл бұрын
Good job ¡¡ Wingspan of this minitalon is with the adapter wings to encrease the size ???
@joshb74152 жыл бұрын
amazing
@pointman0282 жыл бұрын
Nice job
@yamazuki200102 жыл бұрын
Hello sir. Ano pong firmware gamit nyo s tx at Rx?
@MohammadAdib2 жыл бұрын
This is absolutely incredible. Wondering if you have more details on the VTX antenna. Picture quality looks impeccable
@pilotmiami12 жыл бұрын
thenks
@Odis992 жыл бұрын
How do you output a video signal simultaneously to two devices, a video transmitter and a DVR 1:10? Is there a splitter or just connected directly together?
@MyRazerZone2 жыл бұрын
Hi there. The DVR I am using has an input and output. Input is connected to the 1.2ghz RX and output connected to the 5.8ghz TX to monitor/goggles.
@abdulfpv33632 жыл бұрын
Are the batery 4s 3P all in front?
@MyRazerZone2 жыл бұрын
Hi there! Yes is is a 3 stack 18650 cells. I did trim the sides a bit to fit. And is hitting the top cover slightly.
@MyRazerZone2 жыл бұрын
Yes. It fits snugly and almost touching the partition between the front and back compartment
@abdulfpv33632 жыл бұрын
@@MyRazerZone thanks for info brother
@MOKKAPA_FPV3 жыл бұрын
what brand of 21700 cells are you using in this model
@sakarrc50013 жыл бұрын
Cruise, durability and endurance 7/7. Landing 5/7 :) Well done, very efficient bird.
@sibujacob9773 жыл бұрын
very stable flight
@crashrr29933 жыл бұрын
Beautiful. That big blue building is a handy marker for your homeward journey! I've just bought my first fpv kit and will mount it on my Radian to do something similar. Gonna have to start learning what the fields look like...!
@k1ortia3 жыл бұрын
That,s an amazing achievement. do you have a link for the 1.2ghz antennas? I cant find any decent ones anywhere. Cheers
@unixoid333 жыл бұрын
prodrone.pl for example
@stonedDawg3 жыл бұрын
oh so nice.... hey man, btw did you enable the airspeed (use_arspd) or not?
@sayedmuhammadidrees14533 жыл бұрын
can you add double receiver to it? why do you hae dragon link and r9m?
@MyRazerZone3 жыл бұрын
Dragonlink antenna is for 1.2ghz VTX. Yes you can add another R9 reciever for diversity/redundancy
@patlevis24303 жыл бұрын
Outstanding flight. i love your vids man. Btw, what was your ground station set-up for this flight?
@patlevis24303 жыл бұрын
Wonderful flight! congratulations.
@igoryurchenko8233 жыл бұрын
Dear MyRazerZone. Thanks for the nice videos! I decided to follow your lead and bought a Brother Hobby Avenger 2812 1115KV. for your Mini Talon. In my case, I use ESC Hobbywing FLYFUN 60A V5, Li-ion 6S 4P, but the engine heats up at about 65-75 degrees for 1-2 minutes even without a propeller at 50 percent throttle. I wanted to know from you, too, the engine temperature is high, or just my case, and I have a marriage.
@igoryurchenko8233 жыл бұрын
Dear MyRazerZone. Thanks for the nice videos! I decided to follow your lead and bought a Brother Hobby Avenger 2812 1115KV. for your Mini Talon. In my case, I use ESC Hobbywing FLYFUN 60A V5, Li-ion 6S 4P, but the engine heats up at about 65-75 degrees for 1-2 minutes even without a propeller at 50 percent throttle. I wanted to know from you, too, the engine temperature is high, or just my case, and I have a marriage.
@igoryurchenko8233 жыл бұрын
Dear MyRazerZone. Thanks for the nice videos! I decided to follow your lead and bought a Brother Hobby Avenger 2812 1115KV. for your Mini Talon. In my case, I use ESC Hobbywing FLYFUN 60A V5, Li-ion 6S 4P, but the engine heats up at about 65-75 degrees for 1-2 minutes even without a propeller at 50 percent throttle. I wanted to know from you, too, the engine temperature is high, or just my case, and I have a marriage.
@abalakov3 жыл бұрын
dvr is on board?
@MyRazerZone3 жыл бұрын
Hi. Video is recorded on my groundstation. I am using 1.2ghz video
@abalakov3 жыл бұрын
@@MyRazerZone it is good. Please, give a description of the video path. Sorry for bad language, i am from Russia.
@alainlagardere7523 жыл бұрын
Hello, can you share the result of the PID tuning under arduplane after this flight
@salbadikerley71003 жыл бұрын
Hey
@k1ortia3 жыл бұрын
Amazing flight. What cells did you use for your 21700 pack? Much appreciated 👍🏽
@jharwinbarrozo3 жыл бұрын
I wonder what's the brand of 18650 you're using? Care to share? You mentioned 5s3p and it has total capacity of 9600, so per cell 9600/3 = 3200mah.
@MyRazerZone3 жыл бұрын
Yes you are correct. Cells are 3200mah each. GREENPOWER brand. Bought it from a shop that sells solar panels and other stuff.
@joaoferreira80443 жыл бұрын
impressive!!!! one question on the wing extention, how it handle with bigger wingspan, especially on landing
@blackterminal3 жыл бұрын
Hi could you tell me what app is used to project the white areas you wish to cover in a video? Thank you
@blackterminal3 жыл бұрын
How far did you fly? Do you use a tracker it move the antenna yourself?
@mohanndalahmadi3 жыл бұрын
Awesome flight. It looks like you’ve got the ESC telemetry configured. I am currently trying to follow the ardupilot documentation with no luck. Wondering if you had to do anything special to get them to work? Thanks 😊
@MyRazerZone3 жыл бұрын
Hi, just wire the telemetry pad to any available RX and configure it as esc telemetry on INAV configurator or MissionPlanner.
@thefitchesvideo3 жыл бұрын
Hello. I have the 2212 930kv and was going to fit it to my mini skyhunter. What’s the power like? Easy to take off etc? I am worried it is a little under powered?
@MyRazerZone3 жыл бұрын
Hi!, if you launch by hand with 4S you might find it a little underpowered. But once in the air, it is very efficient. You can use 5S and prop down to 9X5 or 8X6.
@thefitchesvideo3 жыл бұрын
@@MyRazerZone thanks. Did you ever try a 1047? The SS 2212 900kv can take one according to the specs
@rodeopilot74953 жыл бұрын
Great video, finding recommend 1300kv motors, Do you think you have enough thrust to hand launch ? And what’s the minimum cruise amps?
@MyRazerZone3 жыл бұрын
Definitely! 2508 or 2807 1200-1300kv and pair it with dalprop 7x5x3 or 8x4.5 and you will have more than enough trust to hand launch easily. 60-70kph cruize Amp should be aroun 5-8A
@rodeopilot74953 жыл бұрын
Sorry my question was about the motors you’re using the sunnysky 2212 980kv , that’s what you are using right ? Do you like those or would you use different ones?
@MyRazerZone3 жыл бұрын
@@rodeopilot7495 they are just spares from previous builds. Used them on the albabird just for the maiden and a few flights. I have already replaced them with brotherhobby 2510 1030KV with 8X6 APC props on 5S3P Li-Ion
@fredggp3 жыл бұрын
I love these videos, thanks. I think this kind of plane deserves a landing gear to be perfect. Thumbs up for you!
@sajjamen3 жыл бұрын
Hı hangi yazılımı kullanıorsunuz acaba ben 1 km fs problemi yaşıyorum aynı setupla
@karambolis83 жыл бұрын
Hello. It was pleasure to watch. I can't wait to build mine. Have you used airspeed sensor ro this is just calculated airspeed? What is this temp. reading on OSD?
@MyRazerZone3 жыл бұрын
Hi! No Air speed sensor installed. It is just synthetic air speed computed by ardupilot. Temp is from ESC telemetry. It is enabled via BLhelisuite. You'll gonna love the ARwing Pro. Pretty fast and can carry big Batts (a requirement to balance at CG 😁) Cheers!
@karambolis83 жыл бұрын
@@MyRazerZone I'm going to use 4S2P 18650 pack. What is your minimal speed for landing? Currently I'm flygin Volantex Phoenix, and as it is great motorglider, for FPV it's just way too slow. In moderate wind it just flights backward, unless on full throttle :D
@MyRazerZone3 жыл бұрын
@@karambolis8 landing is around 40kph to 50kph. I have a PhoenixS 1600. I enjoy that plane even in gusty wind.
@dekiaza3 жыл бұрын
Hi. You flying this Arwing pro, with telemetry or with vtx?
@MyRazerZone3 жыл бұрын
I have mavlink active on crossfire and also VTX. Thanks!
@dekiaza3 жыл бұрын
@@MyRazerZone how you connect the crossfire with mavlink? Do u have video tutorial about this? Thank you 🙏
@MyRazerZone3 жыл бұрын
kzbin.info/www/bejne/m5zIZa2fd7SVb8U
@dekiaza3 жыл бұрын
@@MyRazerZone awesome. Thank you 🙏
@goodboyrc53983 жыл бұрын
Super nice flight✈✈✈Sir baka pwede malaman san ka nakabili ng parts na gamit mo dito esp. yung crossfire rxtx, prop and motor. Til now sticker plang nakakabit ko sa ARwingPro😂
@MyRazerZone3 жыл бұрын
Sa shopee Lang boss. Pinoyfpv tska aftershow pH mga local sellers sa shopee na kinukuhanan ko. Yun iba overseas na shopee parin. Haha 😁
@HakanAras4 жыл бұрын
An excellent and exciting flight. Why didn't you install HD camera gopro or ..etc.. on the plane? Would it reduce the flight time too much?
@MyRazerZone4 жыл бұрын
I have installed a caddx turtle v2. Video didn't turn out well on this flight since i have installed an ND filter. Next LR flight I'll be posting video in hd. Thanks!
@sonyhadi88664 жыл бұрын
Kaya di Indonesia
@Joneszee19694 жыл бұрын
Great flight thanks for the footage. How much does that battery weigh?
@MyRazerZone4 жыл бұрын
Hi! Thanks! 😊 5S3P 9600mah 18650 cells is 743g.
@probante4 жыл бұрын
Stunnig flight! i see you are using wing extension for your mini talon. i am building one. where did you get them? thanks for your reply.
@MyRazerZone4 жыл бұрын
Thanks! I bought spare wings from banggood. Cheers!
@akkarawinampin97414 жыл бұрын
Do you have a link for your vtx? Or tell me a more about your Vtx. Thanks friend.
@MyRazerZone3 жыл бұрын
banggood.app.link/8Lhm9TYJhdb
@EnglishTurbines4 жыл бұрын
A fast low drag cruiser...I'm guessing you didn't fit the GoPro in there..?...and fitted battery instead?..Well done breaking 100kms...So how many 18650 cells in 5S config..?...Ten?.....Why do they assume we want a bloody GoPro onboard?....🤔🙄
@MyRazerZone4 жыл бұрын
Yup! No GoPro. Im really impressed by this wing. I think it might replace my S1100. I'm Going to attempt to max the range soon. 5S3P = 15pcs 18650 Li-Ion cells. Battery compartment is not so deep so Fitting in Li-Ion needs some test fitting before soldering.
@EnglishTurbines4 жыл бұрын
@@MyRazerZone I recently made a 6S pack for a friends quad...Be interested to see how you fitted all 15 cells in there...Maybe a still in the next Video...?...🤔🤔🤔🇬🇧
@javito45024 жыл бұрын
Hi. how to configure failsafe with R9 slim + and ardupilot. that it is necessary to do in each thing. thanks
@MyRazerZone4 жыл бұрын
Just set failsafe in your radio to cut. Once THR signal goes down, ardupilot senses it as failsafe and it will initiate Circle then RTH. You can test it on the bench while connected to a computer (do not connect batt) turn off your radio and check status screen in the first tab of misaion planner.
@MyRazerZone4 жыл бұрын
kzbin.info/www/bejne/envMoZmmZ52li8U Failsafe is at 8:30