DIY free wheel crank for mid drive ebike

[@gearheadadrenalinedean2214]

This helped me alot! My project is making a jack shaft kit for my 2 stroke 66cc/80cc engine on my bike. Needed a freewheel... luckily I had one off a E-scooter I had laying around. It's doesn't have the gear on it it's just a flat ring with four holes in it. Perfect!

[@kenfong6373]

I did this and the problem I encountered was the threaded bearing mount Does not allow the crank arm to egage the square anymore .It sticks too far out. This will only work if you have the room between the crank and the bottom bracket for the bearing mount.Also instead of cutting up the hub. The right side of a bottom bracket bearing cup fits a standard freewheel. So make sure you have the room or the older bottom bracket style axle where the chainring side is longer. BEFORE EVEN CONSIDERING check if you have the clearance first, once you start cutting theres no turning back except to go back to square one and replace the crank to a regular one again.

[@FightFilms]

you need a bottom bracket with a longer spindle

[@deviceinhere]

As an added bonus you can change the rear gears without pedaling.

[@prisnrev5265]

This is what I looking for : the secret of freewheel crank by simple DIY. Thank you for sharing the trick, soon I will do it and having my own cheap mid drive electric bike will dream come true because I don't have much money to buy built up mid drive kit in the market

[@prisnrev5265]

Oh I realize just now, unfortunately this video about freewheel crank is not effective, he only use tooth freewheel, finally I dislike this video. I suggest it should be TOOTHLESS freewheel to build a handmade freewheel crank, and No Welding. yeah......freewheel with no gear is suggested

[@Mr_Ravee]

@@prisnrev5265 there are premade freewheel sprockets available online

[@tonyjenkins7156]

Good job. I am building a tandem and need a clutched crank. This will work great.

[@daVidFonda]

Your work is awesome. Thanks for the tip. Was trying to find a solution for that crank. Found it now!

[@ramadavince6611]

Nice video.. this help me so much in my project, and it's my most trouble part in the project ✌️

[@FACE-PROFILERZ]

Tama ito sa mga tandem bike for free wheel pedaling. Sana magawa ko rin ito pag nagkatandem kami. Mahal ang IPS cranks, Independent Pedaling System nasa $500 din.

[@SherwinDats]

hala ang galing nyo sa mga DIY, ayus to, salamat dito, nainspire ako....

[@albertnario4877]

opo ok yung phone na sinabi ko sainyo, cp lng dn gamit ko pang video, saka kahit naka sakay ako sa bike d gaanong shaky video ko.

[@databanks]

Nice and simple once seen, but not before, thank you. Think I have a spare crank arm and a hub with a bearing that's too worn to use safely so perfect for this sort of thing

[@ekekwejoseph6477]

3:23 the sprocket sound is the tonic of the background song

[@energycrafts8206]

Very creative. Well done Albert.

[@lancetah]

Ayos! Muntik ko na mamiss tong isang to hehehe pero mainam paa yan boss 👍

[@amitaimedan]

Sorry, but the cog looks that it is sticking to much, I don't thing you can connect it to the hub without some sort of an extension.

[@agussatpam8084]

Saya sudah coba dan ternyata gk pas di BB. Permasalahannya crank jd terlalu panjang. Perlu teknik supaya crank tetep sesuai ukuran agar as BB bisa nancap pas.Solusi akhirnya saya modif gk pake hub,tp pake mangkokan di gear nya separoh masuk.👍

[@andreyrozodominguez8050]

Pero faltó instalar y en sayarlo

[@kiranwallapure]

Very nice you did what i wanted you really nice

[@Hamid9e]

Can you build a 1000/1500w hub motor as mid drive?

[@albertnario4877]

sure I can, but I don't have them.

[@ammartahir5871]

@@albertnario4877 i have a crankset of cycle that is free when I pedal backwards because there is motor attached to my cycle now that crankset is damaged and I am using regular crankset of cycle that is not free that I pedal backwards I think if I make this free wheel crankset it can solve my problem

[@gyrenrockz]

mid drive is better than hub drive..

[@rimbang_]

Make it again with new version

[@Fécatubegames]

Make a doble bike using This ,congratulation

[@jcmecatronica]

Amazing 🎉

[@laurentboissin5299]

Merci de partager cette idée.

[@DorkyThorpy]

Cool. Well done dude.

[@roleyngarcia9709]

Sir make a hallow tech crank free wheel

[@md.sohelmahmud429]

That is so good. Thanks...

[@juanaponte2213]

hola amigo quiero velo video esto me gusta poco poco explica bien mano trabajo tuyo fino gracias resp , porfavor

[@FACE-PROFILERZ]

@Juan Aponte, múy gracías la suporta de Filipino inventór. Diós té Bendiga. En Tagalog lengua, "salamat sa suporta mo sa mga Pilipino imbentors. Pagpalain ka nawa ng Diyos." En Ingles, thanks for your support on Filipino inventors. God Bless you. Saludo de Califorña

[@bendelsol]

sakto galing!

[@suriyat8773]

I love Batt72V

[@VipinRao42]

Nice

[@farhadkian63]

ساده ولی کاربردی

[@danielgolub5934]

Top

[@zoneofgamerzz3279]

1.5k th liker

[@maiamigt]

very clever !!!

[@gerardjachymiak5822]

next video = how to make a 10kw middrive ebike

[@KawaiiSanta]

easy

[@10OZDuster]

pre nasan barrio ka bisita aso dyan pag bakasyon ko.

[@albertnario4877]

Mariveles bataan

[@10OZDuster]

@@albertnario4877 thank you bosing watching from Los Angeles, Ca. USA

[@FACE-PROFILERZ]

@@10OZDuster dito lang rin kami malapit sa Temecula. Balita ko iba na ang kalakaran sa pag uwi galing dito. Kwarantin muna sa Visayas for 14 days instead sa Manila International Airport, bayad pa $4/day meals and lodging. Pagkatapos dadalhin ka na kung san ka nakatira tapos panibagong 14 na araw kwarantin ulit. 28-days! Ubos na bakasyon, kwarantin ulit pagbalik, fire pa sa work, iba na talaga.

[@qwer198]

wow...

[@smartcreative6490]

Good Idea

[@avaduthamdharikrishnareddy3354]

Ad

[@graudubode9784]

cool

[@TblBURTSbli]

first music LOL

[@laurentboissin5299]

merci : kzbin.info/www/bejne/ZprTiYiqqp2Sh9E

[@sotenn007]

Нахуя ???

[@TheGoodLife911]

Чтоб мотор центральный мотор поставить,и чтоб у тебя педали не вращались с такой же скоростью как передняя звезда.

[@Prosto_prosto2]

@@TheGoodLife911 во-во, иммено так

[@prisnrev5265]

Oh I realize just now, unfortunately this video about freewheel crank is not effective, he only use tooth freewheel, finally I dislike this video. I suggest it should be TOOTHLESS freewheel to build a handmade freewheel crank, and No Welding. yeah......freewheel with no gear is suggested