Alex's Pasta Machine: The Rebuildening!

Bit of a break down and rebuild of Alex French Guy Cooking's internet pasta machine. Looking forward to see what he'll do with it next. Hope you enjoy.
For more info, be sure to check out Alex's Pasta Machine Videos:
• I Imported a HEAVY-DUT...
• 5000rpm Foot-Operated ...
-------------
Music: "Wild Pogo" - Francis Preve, & "Hollywood High" - Silent Partner

[@FrenchGuyCooking]

This channel is a KZbin gem. I am honored to be featured here. PS : I love the fractional adjustment on these knobs. I find them imperious.

[@thiagoennes]

i envy you so much right now... it's not even funny.

[@thiagoennes]

also, when is the precision pasta video coming out? i am rewatching the ramen series right now just to warm up!

[@MrPeppah743]

yes!!

[@4188-d5f]

Alex, j’adore tes vidéos. So, you’ll need to get new cutters made to get both thickness and width precision adjustments... hehehe I also just bought the same machine you did as I broke mine making ramen noodles based on your recipe...

[@Abe.Wassenstein]

I'm also fond of Tonys Knob

[@siegwardcatarina3420]

Never change, Tony. Or, change in accordance with limits I periodically and arbitrarily deem acceptable.

[@DinoSarma]

This belongs to a group called "squishers", a subgenus of "crushy machines". Seriously, please never change, that had me cackling.

[@colinfurze]

I'm getting more fond of your router with every project, maybe I need to make some calls and set up a date. Great video as always

[@ThisOldTony]

petrol powered 20HP router!

[@spinyuk]

holy moly, a furze+TOT mixup would be awesome :)

[@justinmaynard890]

Furze!

[@seannyyx]

WOW! 2 of my favourite youtubers commented on this video, and just added a new fav after subbing to this channel :D

[@ShimotsukiSaizo1]

Well look ho it is think of make the most crazy pasta machine for alex yet cuz i would love to watch that vid

[@davidtansey1395]

"..if we give Alex the benefit of the doubt -- say he weighs 60 pounds..." oh my, you delivered that perfectly!

[@coleeverman672]

"Criticizing other people's work is always easy and fun to do, so let's do that next" Nuggets like that little gem are why I keep coming back to this channel.

[@pianopete341]

Highlight of the video definitely

[@christurley391]

No one turns a $90 pasta machine into a $2200 one like you Tony. Lol Thanks for the video.

[@CrystalStearOfTheCas]

sure if that's the way you make a living, then every optimization or quality of life upgrade is worth it, the argument is not the same if you make past twice a month

[@adammcnaughton8814]

The lefty lucy with the phone number had me rollin!

[@adubz54]

I wonder if anyone tried calling it

[@Tom-sp2xs]

@@adubz54 I did, she was all right!

[@WoodCutr1]

@@Tom-sp2xs I- im dead

[@horacegentleman3296]

The rumors about her are true.

[@WoodCutr1]

@@horacegentleman3296 I got a call from her last week, something about tax fraud or some crap, idk, she had a thick indian accent, I couldnt understand her

[@JP-fr5ki]

Finaly I can laugh and learn I live in germany and use extremely technical terms like crushy machine's and squishers all the time. Great content and humour

[@Tensaii1]

You live in Germany but I bet you are not A German because of your sense of Humor ;)

[@L3g0m4nn]

Tensaii1 haha german people no funny only work

[@martintaylor9743]

@@L3g0m4nn pppp

[@Oberon4278]

You know about German torque, right?

[@j.eazychrist]

AvE & Tony would definitely be in The Top 10 Anime Crossovers of all time, just saying.

[@charnlangford4298]

That's too many disembodied hands for one screen!

[@johnydl]

That cross over happened with Chris from Clickspring 6 legendary hands (as I recall it was about 2 years ago and the antikithera mechanism)

[@tylerblubaugh5549]

@@johnydl get all 3 of em and add bosnianbill and the lpl

[@nestormoctezuma4695]

Tyler Blubaugh wow how much crossover in audience is there?

[@Fwibos]

Yes. Do this.

[@joeheilm]

Tony, your content is spectacular. Thanks for pointing out Alex's channel, with your help I finally found a channel my girlfriend and I can watch together...I'm referring to Alex's channel. I am still trying get her to watch your channel, but she doesn't know what a good thing is when she sees it....which explains why she is with me. Awesome stuff, keep up the great work.

[@AlecSteele]

AWESOME!

[@barabolak]

Go back to making your knives! Looking forward to watching your next video ;)

[@ethanbarrieau2417]

I love that everyone that I watch on KZbin also watches each other!

[@spikes1529]

Yeah hurry up with that leather working.... I want to see it done!

[@Backbeardjack99]

Finish up that bowie knife project dude! I can't wait until tomorrow :b

[@thiagoennes]

a pair of chefs knives for alex? one german style and the other french? just saying, it would be awesome.

[@HandToolRescue]

I'm restoring an antique pasta machine in the future. Would you want to machine some simple stuff for it? Collab...

[@devintran9884]

Hand Tool Rescue nice

[@werterbot]

Yeeeeeeeesssssss. As a big fan of you both, can I just say yyyyeeeeeessssssssss to a colab between you two

[@braiansingh9730]

Hand Tool Rescue aw yeah

[@jeyy_plays]

Would love to see a collab between you two!

[@arkitson]

Please say yes, This Old Tony!

[@feelingluckyduck373]

You make machinist seem way cooler than we actually are. Thank You.

[@ThisOldTony]

i have a black leather jacket with 'machinist' embroidered on the back and you better believe when i leave the house... i pop that collar.

[@kengamble8595]

This Old Tony Maybe you should put a big. " THE " in front of Machinist.! 😊

[@Gottenhimfella]

I used to know a machinist who was into embroidery too when she wasn't working miracles with her industrial Pfaff rotary with the servo vector drive

[@EURIPODES]

That feeling when you discover a new KZbin channel that you just know you will love.

[@greebo7857]

"Cookie cement, I mean dough"...... My wife died a year ago tomorrow, and SHE's laughing..

[@Guru_1092]

Sorry for your loss my dude.

[@BigHeretic]

*Greebo* It's not the first reference to Mrs TOT's cookies - although it could be, I don't watch these in order.

[@Abrikosmanden]

Tony. TONY!!! - You're killing me :D The music, the ... dancing, the CNC and routing tune, the tattoo'd side plate. All of it! You're ascending into KZbin master race territory, as far as I'm concerned! I saw Alex's pasta machine and thought of something along the lines of a black KZbin hole of perfection through channel intermiggeling-something! This was immensely enjoyable!

[@Abrikosmanden]

Damn, I sound like an absolute fanboy .....

[@jimc3688]

I was anticipating the time machine when he pulled the lever.

[@CarlosGlatzos976]

Thomas Bidstrup nothing wrong with that. He earned it!

[@Alk333_fan]

I concur.

[@onemanriflemaker3873]

Thomas Bidstrup A black KZbin hole? I wonder if it would emit TOT radiation instead of hawkin! RIP Steven. TOT should do a Colab with PBS space time! With lathe based time travel and now the possibility of TOT radiation. This channel may need to contribute to physics in a higher way. At least then it wouldn't just be the pasta that was "stringy" Eh Tony?

[@GiacoWhatever]

This must be the best video I've seen in a VERY long time!

[@ThisOldTony]

Thanks Giaco!

[@LazerLord10]

Oh my, I can't stop smiling with how amazing that introduction was. Truly one of the best videos I've watched.

[@gregorywahlberg9486]

I work 10 hours a day in a machine shop and in my free time at home since I don't have any space for machines I watch machine shop videos. love your vids tony

[@g45h96]

This man literally just built a vernier caliper into a pasta machine 😂

[@MaxMakerChannel]

I saw him get it a few months ago and I was quite impressed by how solid it was. Real gears, real steel and it seemed to worked. A machine like this made in Europe would cost 1000€ probably.

[@Zukovec]

wow hold your horses , the only reason it would be 1000€ is cause it tonys other wise some were in the 150-200 ish

[@sstorholm]

150 euros gets you a set of rollers for a Kitchen Aid mixer, so I'd figure quite a bit more.

[@aserta]

More, and Tony hasn't even touched the peak level at which one of these (by regulations) should be, we're talking proper 2 to 3 k money here.

[@jondoe6618]

here in the states we can probably go to harbor freight and buy it for 40$. Damn those kids in china make stuff so cheap it is hard to not buy.

[@geraldgepes]

Max, got a link to the video?

[@cubiee-sci6190]

this is one of the best combos in youtube history

[@thiagoennes]

origins was a jam tho.

[@jimmydiresta]

Beautiful!! And funny

[@Butho_04]

jimmydiresta collab on the pizza cutter introduced me to AFGC. now I've discovered This Old Tony through AFGC..... this is good!!!

5:17 "It appears they opted to do that with a snap ring and two small styrene balls."

[@thomasdickson35]

"The obvious confusion of calling them just: the big one and the small one" Story of my life.

[@creativeu9852]

Tony, I am a polymer clay artist. I use a pasta machine to sheet my clay at least once a day. You've created my dream machine!

[@daviddroescher]

Complete and Utter Mess You could set it up with an additional cog that would feed the flat clay back into the top of the machine.

[@creativeu9852]

That probably would be really helpful. Unfortunately, I am not very mechanically inclined. I wish I was! High end machines for clayers cost over 500.00! www.lucyclaystore.com/usa/machine/318-lcmachine-elephant-e12.html

[@danielnapast4955]

Dude this thing is friggin insane, the workmanship is absolutely unbelievable

[@glenralph5123]

Spur gears inside done in the style of Intel Inside are the types of little touches that sets you apart from the rest. Love the little flash dance jog on the spot reference. Lots of lil Easter eggs that are greatly appreciated. Thanks Tony.... btw, you need to be on Patreon!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@GlaDos1000000]

As a fellow machinist named Tony I very much appreciate the immersion these videos provide

[@AkkayaOzgun]

I know nothing about machining, and I've just discovered this channel, but this was some of the most entertaining content I've ever seen on KZbin. Your comedic timing, taste in humour, amazing. Well done sir, subbed.

[@lukeng5981]

That moment when your two favourite youtubers make it official ❤️

[@lukeng5981]

with an AvE reference, heaven!

[@verdatum]

Such a great collaboration! I'm so glad that you could finally help Wintergatan finish his Marble Machine X!.....wait a second...

[@ThisOldTony]

haha

[@TomHaroldArt]

Hey, if Tony has an interest in working with a guy who builds marble machines, I'm the guy you want to talk to! Love these videos, and I am certain that this is the absolute nicest pasta machine on the planet. It's going to become a hipster-cook thing to have a pasta machine tooled by TOT. Then there will undoubtedly be a spinoff reality show where we watch Tony rise to meteoric fame as he graces the kitchens of the world with his pasta machines, then the stress will start to build, Tony will struggle with is fame, but rather than drugs and a broken man, I believe we'll call in Tubal Cain to have a heart to heart with the young man and get him back on his feet and doing what he loves most, helping me build marble machines. Yep.

[@vitaljokers3754]

This is one of the greatest comments on youtube period.

[@alflud]

That's a real fine set of machinists thumbs you got there Tony.

[@TokamakUK]

That's an Expansive little joke right at the start there, don't think I didn't see that, aww you.

[@fxzn]

i thought i was the only one who watched that show

[@luckinber]

I am filled with joy, I love the expense

[@TonytheEE]

I've seen this video half a dozen times, but didn't get the joke until now, since I started watching/reading expanse. OMG!

[@cflinger1979]

I just recently stumbled upon your channel and I can’t get enough of your videos. A lot of the machine work is over my head but I love watching and learning. I can’t wait for the next video.

[@TabletopMachineShop]

This project would have had me scratching my noodle. I hope you got some dough for it.

[@MrMalthusMusic]

10:00 MDF, what the dickens? Oh, niiiice. Also really loved the 80s montage music. All your videos are fun Tony, but this one was fun-er ;)

[@p_mouse8676]

This is why TV is obsolete nowadays Just to much joy Btw smart idea to precut the aluminium first before the cnc!

[@JamieBainbridge]

I agree totally. I'm on the verge of cancelling my Netflix because I have so much more I enjoy on KZbin, so I use the money to support on Patreon instead.

[@peterxyz3541]

The story telling and education value is gold!!! 👍🏼👍🏼👍🏼👍🏼❤️

[@aaronhadley8121]

Tony please don't ever stop making videos , your channel truly is one of if not my favorite channel your humor dude 😂😂😂 it brightens my day . I just don't understand how you have time to do all of the work you do and then the video editing to such a high caliber it's impressive my man !!!

[@TheBookDoctor]

OMG. A Tony/Alex collab? Is it my birthday or something?

[@ChrisUhlik]

It is my birthday and I couldn't be more pleased! Thank-you Tony and Alex.

[@imbored7779]

I feel like opening that package with the mini belt sander was an AvE reference. Anyway, great video and creative editing as always!

[@Qgal5kap123]

I'mBored777 - I think so too 😁

[@coolafman]

I'mBored777 and the coughing if recent videos are to be believed

[@balthazarfitzpatrick7770]

Yeah, plus this little test tube and the protogen sender :)

[@jimm2099]

Tony's getting his steps in while doing three step machining. I'd love to see his flip phone step count on that one. Thanks for another fantastic video Tony! Could you give me Lefty Lucy's number again?

[@JgHaverty]

Vernier adjustments on a pasta machine. Tony, before use, Im gonna need you to send it up to our metrology department to have it shipped out for certification. After it gets back, we're going to need to place the calibration date in our guide book, then after; we can petition to kitchen engineering to verify use. After installation, then we need skilled trades to come verify proper operation, then I'll finally sign off fit for use. Jokes and politics aside, what a fantastic build lol

[@stalelemonproduction]

"a normal person probably would've split this into an 8 part series with cliffhangers" I can't tell if that was a jab at clickspring or not

[@teknikal_domain]

Or KZbinrs in general that split things up just to appear to have more content. Also retention time.

[@tomf3150]

Alec Steele, 'murican version.

[@jeremymcadam7400]

@@tomf3150 8 is no where near enough for alec. he'd take 8 videos to stop fucking up the gear bore

[@agentjwa]

dude not even kidding this is perfection in a video at levels ive never experienced before

[@Tinwoodie100]

A note in my inbox said "This Old Tony just uploaded a video", I can tell you, it's not just any old video.... its craftsmanship oozing with creative genius. Love your work big fella!

[@knalliebar]

This is so weird... Feels like two of my pals that don't know each other hanging out without me hehehe

[@wonteatit]

Here from Alex's channel. I really enjoyed this and you've got a new sub! Awesome work!

[@huemungus69]

The dancing feet @ 16:14 is the best part, hands down! I have searched through so many of your videos to find this again to experience the hilarity again! Thank you sir for the joy you bring us.

[@Mortagus]

This is the first video from this channel I see and this is just awesome: very funny, well cut and you can learn some stuff. Very well done sir and I'm looking for tour next master piece 😀

[@ThisOldTony]

thanks Ben!

[@The_Mimewar]

Thanks Tony! Dammit! Now I’m watching Alex make cheese, and making trips to the grocery every day!

[@TonyAnschutz]

brilliant. YOu just got me hooked on machining. Alex sent me your way and I'm so glad he did. FUnny, creative and master editing! Yea baby! Love your channel!

[@Spedley_2142]

The editing is great, especially when you watch the channel enough to see the jokes before they come! :)

[@NoNonsenseKnowHow]

Killer video man! Do you do all your own editing!? Genius

[@kgstudio5352]

This was amazing. I came over from Alex’s channel; and you are HILARIOUS. Completely lost it on the “Flashdance” tennis shoes dance...so incredibly funny!! I am a closeted-wannabe-wish-I-had-been-a-machinist and have every intention of being one when I die and come back next time. Love your channel...peace & blessings

[@MarionMakarewicz]

Stunning, simply stunning! Where did you get your gift for narrative? You just keep hitting them out of the park.

[@MichelLinschoten]

he totally reminds me of AVE

[@phooesnax]

Ok. Time to ask. How do we get you to quit your real job and do this for our full time entertainment? What a great video Jim

[@JamieBainbridge]

Patreon

[@eformance]

Did anyone else notice that the *Pirate Ship Steering Wheel* was actually a large v-belt pulley too? Ahem, throw a 1/4HP motor and belt on that!

[@aggese]

Alex actually used an sewing machine motor on it

[@kevinvermeer9011]

And a guard!! Because shortly after you put a motor on it, someone will put something between the spokes and the back of the machine. And that thing will either be sheared off or flung violently!

[@Rottinrock]

add a five speed transmission to get the right pasta feet per minuet

[@1320crusier]

yea.. about 1000 feet per second..

[@troyfanning5670]

This is by far one of Tony’s best videos. I rewatch it often and still crack up laughing while still learning!

[@TheNefastor]

"Squisher" is a very wide category of machines by virtue of the fact that many machines not originally designed as squishers accidentally end-up squishing things. Especially feet and misplaced hands, but also tiny surface-mount microchips. In fact any machine ever built is just two stiff drinks away from becoming a squisher.

[@powder-phun949]

Synthwave, the best music genre ever AND this old tony AT THE SAME TIME? I must be dreaming.

[@izzyswan]

i think i love you! wait umm i meant great video. yeah

[@ThisOldTony]

I love you too, Izzy. Don't fight it.

[@seansysig]

Izzy would have a cordless drill powering this beautiful creation.

[@A_Casual_NPC]

One of your best videos so far. It's maybecuzI watch everything of Alex too, but this absolutely cracked me up!!

[@RedDogForge]

you always bring a smile to my face Tony, thank you, smiles have been in short supply lately. hope this finds you well!

[@Afgncaatp]

I've had to pause every 30 seconds just to adequately absorb the dry AF humor, well done, a masterpiece. I see why you and Alex mesh up so well. All of this is layered in front of such a solid manufacturing skill! Seeing all the details that go into it it's almost a shame those skills aren't showcased more

[@Motorsteak]

Oof that protomolecule sample

[@taohawaii]

Protomolecule and a Chinese pasta machine... and that folks, is how flying spaghetti monsters are made!

[@vonantero9458]

Looks good! I'm wondering if it might be a bit top heavy when used? Pasta machine I'm using comes with a c-clamp to clamp it to the table. Are there threaded holes under the feet perhaps?

[@ThisOldTony]

Yes there are threaded holes in the bottom. It really does need to be fastened down.

[@ovved]

I came from Alex's channel and this channel is truly a gem! I love the editing, music, hungry, and educational bits! 👌

[@WaltNowey]

THANK YOU- I have the same style of pasta machine. The wipers and spring clips actually came out in my pasta dough the other day and I had absolutely no idea how to put them back together. Turns out it is a very simple yet clever design. You saved me hours of research and tinkering- thanks again.

[@ackervaldviktor]

I discovered this channel with Alex... i'm happy to be here.

[@bridgettleigh2912]

Me too

[@iShonKo]

Really nice to see what has become of this channel. From a really good hobiest, to an amazing video content. Keep up the excellent work of making me feel dumb :p As always, best channel ever.

[@ThisOldTony]

Thanks Shon!

[@nicolaasporter3215]

First time watcher. Funny as hell. Now subscribed.

[@mauricejones1310]

I just wanted to thank you for making the best videos on You Tube. I really enjoy the way you put the video together and take the time to educate your viewers no matter what level of knowledge they may have in this field. I watch and always amazed by your knowledge and skill you have shown in these videos. Thank you for your time and hard work in making these great educational videos

[@ThisOldTony]

Thanks Mo Jo!

[@Malueram]

Tony you rock! Thanks for showing us how you helped Alex! This will keep me smiling all day.

[@AJR2208]

So was that the "I really need to pee but I'm nearly finished" dance?

[@fuzzyje7480]

The quality of your videos is stellar. Love the humor (80s montage for life!). Consider a mashup with Chef John sometime!

[@satlainc]

Instructions were unclear, Got my baguette stuck in a pasta making machine joke killed me XD well done sir

[@BruceBoschek]

This was the best Wednesday morning in a long time! Thanks for this amazing video. The efforts you put into these are definitely appreciated.

[@benjamin.kelley]

Tony, I live watching your videos. I'm a recently graduated mechanical engineer, but I find joy in watching how parts are made and the dry humor you use is so enjoyable.

[@ThisOldTony]

thanks Benjamin!

[@silviustro1]

How are you so amazingly good at machining AND editing at the same time?

[@ThisOldTony]

I program my CNC router to do the video editing.

[@1911Zoey]

He has a good sense of humor too. This guy is the Jack of all trades!

[@Madhopsss]

holy shit i burst out laughing at "boys will be boys right, we get talking about pasta machines" XD

[@WhereWhatHuh]

"Each of the tie rods has four nuts" -- does that include the one turning the handle? As for the bearings being pressed -- I'm impressed.

[@HeathenNinox]

Found your channel through Alex. Found Alexs channel a day or two ago. Thank you for making these videos! (Tiny life story, skip if unintrested!) In school, about 5 years ago, I studied CNC-machinary and so far I havn't found a channel that makes CNC as entertaining as I remember it were. Litterly single tear as I saw the schematics. ;.) Sadly I don't work with CNC today, but instead with assembly which has probably dulled my skills from school. But watching this makes me want to reignite the flame that I lost from then. Thank you! Good work with Alexs pasta machine! I will continue watch your stuff! :)

[@mesmer1218]

I saw this video on my feed because I’m subscribed to Alex’s channel. I’m so glad I clicked on this video. It’s so funny, creative, and a joy to watch. I learned a few things too. Nice work! The pasta machine looks awesome!

[@ThisOldTony]

glad to have ya Dani!

[@nonyabusiness665]

So I came here from Alex's video, and after the Spur Gear inside joke, I immediately subscribed.

[@JimmysTractor]

Maybe throw in a set of 127/50 gears for English pasta?

[@MakeBrooklyn]

The bowl gear is driven by opinion .... any particular persons opinion or is it more of a popular opinion sort of thing?

[@brutongaster8184]

+

[@natalieobman5018]

Depends on the person really.

[@denny9931]

As the saying goes: all gears stand still based on a single persons will.

[@Gottenhimfella]

Some windmill drivetrains used poplar for the smaller pinions

[@wallykingsborough5811]

Came over from Alex’s channel. Besides watching people cook, I really like watching people machine stuff (dad was a Navy machinist). Very nice pasta machine.

[@andrewcramer7214]

I came from Alex's channel. You have earned a sub, your editing is fantastic, and you're actually funny without trying super hard. Much love!

[@bobhamlin6186]

9:16 "There are other ways to do this - to change the distance between a geared pair and not get all this backlash." Would love to see some examples of this.

[@mikehawk4517]

Me too... I did some googling but didn't find anything.

[@Liam40]

@@mikehawk4517 A short chain, and a springloaded idler to keep tension no matter how you adjusted it is how I would personally do it. Then of course replace the two gears with sprockets. Chains are cheap, replaceable, and maintainable. Once you have the original chain made, it's a simple matter of going to a bike shop, chainsaw shop, or motorcycle shop to have a replacement sized and cut. As for lubrication, either you could go unlubricated, which isn't too big a deal, or if this was used day in day out, I would likely use a dry graphite based lubricant, or a lil' bit of silicone lube. It's unlikely to come near the food, but just to be safe I would prefer the use of something like silicone or graphite.

[@Spedley_2142]

@@Liam40 Yeah, I'd have gone with a belt. You could use an offset idler gear in between (well two obviously) which rotated around one shaft as the other moved away to take up the slack (just picture two gears moving apart with a gear in the middle moving to keep contact with both).

[@supertramp6011]

Mike Hawk most likely use a vegetable based oil,or plant based in an application like this,we used to use similar in diving compressors,just sayin.

[@johnydl]

To maintain opposing directions of the rollera wouldn't you need one of these inside the loop one outside, be it a chain or belt? So yes 3 sprockets but the configuration won't have the spring loaded idler in the middle it'd be at one end and large enough to wrap the move-able sprocket/pulley and provide a return path kinda an o=O path with the move-able pushing in from top or bottom

[@TonyFleetwood]

a guy named tony making a video with pasta machine. would you like to add any more stereotypes into this one? j/k

[@ottoreuter6279]

+Tony Fleetwood Maybe a guy named Tony ~watching~ a video with pasta machine? lol

[@ThisOldTony]

I don't get it... makes me wonder wattsa-matta-you.

[@TonyFleetwood]

touche good sir

[@TonyFleetwood]

wassa-matter-u is my old alma-mater

[@XavierAncarno]

Merci beaucoup, j’ai bien rigolé. 🖖

[@LarsPallesen]

What a great collab. Love both of your channels so this is a treat. Somehow your silly jokes always manage to take me by surprise. I loved the ones you had in this episode.

[@ChaoticOrder73]

I love this, and the subtle humor definitely cuts through the technical talk. Well done, good sir

[@uelssom]

this old pastoni

[@TomMFD]

Hey, I was watching some older videos, I watched all 3 surface grinder rebuild videos. What became of this project? Is the surface grinder featured in any other videos? Thanks!

[@justeyoung]

Alex is right. The channel is damn funny. I love it. And very educational.

[@gordon6029]

You did such a wicked job of this and I don’t think he was as appreciative as he should have been.

[@heff0d468]

Wow man, great channel. This is the first of your videos I’ve seen and I instantly subscribed at the lefty Lucy joke. Keep up the good work.