Two Guys, Ten Tips: Get the most out of your sewing machine like how to fix Skipped Stitches.

[@RingoWild]

I've been sewing all my life and never knew the tip to avoid skipped stitches. I found myself nodding my head, saying oh my god, this is brilliant! Looking at the comments I see that I'm not the only one who has lamented over those fracking skipped stitches in corners! Thank you!

[@shatteredsquare]

i don't know why but the mechanical stabby machine that makes stuff with scraps of fabric is almost as satisfying as guns, i might have found a new reason to live. instant sub

[@hovawart16]

Easy to understand. Thanks for not playing music or electronic sounds during the presentation. The tip about when to turn the corner was a real gem!

[@AlexanderDyer]

Your Welcome.

[@Tina06019]

Excellent tip about avoiding the skipped stitch in a corner. I have always turned the fabric with the needle sunk all the way down - I will now just slightly turn the wheel a little further, so that the machine has “caught the stitch” underneath the fabric. It makes perfect sense.

[@AlexanderDyer]

It is easy once you know!

[@NYKO888]

I have been sewing forever however but had never heard of the corner trick. A real game changer. Thank you so much for sharing.

[@AlexanderDyer]

🙂

[@JessicaSmith-gd1fu]

Alexander, thanks for these tips. I am 70 and have been sewing regularly since I was in the 9th grade. I had never heard your last two tips! I will definitely be using them.

[@AlexanderDyer]

Thanks Jessica.

[@patriciabaker332]

Been sewing a long time, and I did not know about watching that take up lever to remove your work!!

[@drmichaelelinski6992]

Good reminder to frequently check tension. As you change factors during a project, such as thread size, thread type, fabric, number of layers of fabric, stitch length, etc, all can affect tension as you say. So I need to check tension more often, so the stitches on the project are near perfect. Also, the take up lever should be at the top when removing the fabric. Very useful tips. Thanks...

[@michaelduke4500]

I always learn something from your vids; straight up no frills info. Thanks for no annoying background music and unnecessary rambling.

[@AlexanderDyer]

Rambling is the worst. 😃

[@michaelpugh3112]

Thank you so much for your very helpful tips. If you haven't a little needle threader just wet the back of the needle. It will thread very easily. Thanks for taking the time out to make this very informative video. Jan

[@1lmp1]

I learnt all this at age 6-7 with my mother's old foot pedal powered Singer, but I have to say my mom had gone to a professional tailoring school so I had an advantage. :)

[@betford2]

Another tip I learned is when getting ready to pull your work out is to let the needle lever just barely start back down...only slightly...and you will never have to hold the threads when starting your first stitch next time. Love your videos!

[@AlexanderDyer]

Thanks

[@mindpowerx]

inherited my mother in laws machine - adding it to my arsenal at my print studio. I know zero about sewing machines. Thanks!

[@kathhollandful]

Great tip about making sure the take up lever is in up position before removing fabric. Thanks!

[@AlexanderDyer]

Yes, that is a good one. Before knowing, removing the project is mysterious and frustrating, Once you know it , it is easy to remove your work every time.

[@sapphirecamui6447]

awesome tips, especially the correct machine position for turning and removing the project.

[@AlexanderDyer]

Some of the basics to help you use your machine with mastery. 🙂

[@pparado]

Man, this has got me more inspired now to try sewing...Love the way you present things. Simple, easy to understand...and pacing is just right! Thank you!

[@AlexanderDyer]

I am so glad to hear that you are inspired to sew and I appreciate your kind words.

[@halilyurek5434]

Alexander Dyer hey could you make a Video about machines for beginners?

[@101boertjie]

Sewing is great fun, and the WWW has loads of good stuff to get you started. I can not imagine my life without being able to sew. I also found that some older machines are pretty good starting machines, and you do not need to spend a fortune to get a good machine.

[@srajput3247]

Point about skipped stitch was very helpful. Thanks 👍

[@AlexanderDyer]

Good, Thanks. 😃

[@KeepCalmAndGetInked]

3:51 exactly the tip I was looking for. Just adjusted my needle positioner to be at the exact point for this

[@williammaker1823]

Sei il migliore insegnante che ho mai visto.

[@stopthephilosophicalzombie9017]

Great tips. I figured some of these out on my own during the last month as a beginner, but having it all in one place reinforces the knowledge.

[@BonitasBounty]

I never knew how to use a needle threader! (I never even knew what it was!) I'm quite sure that I have a couple of those hanging around in my sewing box. I can't wait to try it!!!!! Thank you!!!!

[@hullpros7380]

Very nice video! Very good tips that no one else shows. Thank you!!!

[@beckykastelz1648]

I am so glad you shared on the locking the corner stitch! Thank you 😊

[@AlexanderDyer]

That is a good one. Thank you.

[@THESHOMROM]

Good tips. That is some sewing machine. I had an industrial machine in the shop which could sew through 4 pieces of thick cowhide. It was so powerful I couldn't get anyone else to use it. It terrified them.

[@AlexanderDyer]

Terrifies them but excites us, right?😉

[@Rosebomb8]

WOW this was incredibly helpful! i'm a total beginner and this was great advice, thanks so much :)

[@SusanSmith-hl3iv]

Loved skipped stitch at corner tip. Very helpful and one I didn't know. Thank you.

[@AlexanderDyer]

I am glad I could help.

[@stephenvinson6474]

Great instructional vid!!!!! common sense and craft People who work a lot with machines know that you kind of develop a 6th sense and become one with the machine in a sense...you become part of the mechanism ..otherwise your gonna often times be at "odds" with your work partner, the machine. If you are at odds then chances are the machine could mal function and that spells trouble...

[@sarahtesta96]

Great idea Alex 'bout the corners. What I do is reduce my stitch to tiny, TINY length and stitch Across the point.

[@jmarylastone]

thank you - you showed this on an "old" machine and just because I have a new fangled Singer to sew on I still use my oldie but goodie Belvedere Adler for sewing

[@AlexanderDyer]

Newer is not always better.

[@kathyhughes3224]

jmarylastone nb

[@THESHOMROM]

I have a Treddle Singer dated 1902 which still works great. It's especially good for delicate work and quilting. A powerhouse!

[@dzymslizzy3641]

Thumbs up! I do think one of the most aggravating annoyances when sewing is running out of bobbin thread in the middle of a seam! There you are, ripping happily along at 90 mph, get to the end, and find the last 50% not sewn! Bobbins are SO small in relation to the size of thread spools machines will hold! You would think after all these years, that manufacturers would figure out a way for the bobbin case to hold (or connect to) something that holds at least a regular consumer's size spool of thread!

[@AlexanderDyer]

You are in Luck! Check out my latest video for a clearer understanding to your question. kzbin.info/www/bejne/hZiUmYBunrhlaLM

[@drmichaelelinski6992]

Great collaboration with Jasonofall trades! Thanks for all the tips.

[@sartorst3376]

Good tips. Here is anther With 2sided basting tape place a quarter about 4 inches behind presser foot before starting a stich wrape the 2 tails around the quarter This stops them from tangling in the beginning of the stich

[@mikew7104]

Ditto on when to turn the corner tip. Great to know! I wonder if the 'when' is slightly different on different machines. I'll be testing it with my LSZ-1.

[@AlexanderDyer]

I think so.

[@williamwitter3783]

Always learning here

[@nalodailec]

Loved all the tips but the one about the skipped stitch when turning a corner is very helpful indeed - thanks so much.

[@AlexanderDyer]

That has been a popular one. I'm glad you found it helpful. Thank you.

[@sandra447murray]

I like your style. Directions are very clear visually and verbally!

[@AlexanderDyer]

Such a nice thing to say. Thank you.

[@marilyn6068]

I am 72 and didn’t know about the corner. Will be doing it from now on. Thanks

[@AlexanderDyer]

Better late than never. LOL I think half of sewing is operating the machine.

[@sharoncares6599]

The threading of the needle was a great tip for me. Thanks so much!

[@AlexanderDyer]

Outstanding

[@TheStitchWright]

Great fundamentals of sewing tips!

[@AlexanderDyer]

🌟✨

[@floridasaltlife]

Great tips, love your channel, thanks for taking the time to do these videos for us, many people like me can learn so much faster from the gracious efforts of yourself and others.

[@apeterson23]

#4 Best tip ever. Makes me not cuss the machine as much... lol

[@AlexanderDyer]

That's great!

[@angelfiremimosa]

Great tips!

[@donrofkar]

Hey - the two guys I enjoy watching collaborating! Lol There must be a lot of guys who will get more into sewing and the machines with videos like you make.

[@AlexanderDyer]

Heck Yeah, I like the way you think! Thank you.

[@rabaile1]

What GREAT tips! It just proves an old dog (ME) can learn new tricks. :o) Thanks a million, Annette

[@sharonanderson6962]

The collaboration was a great idea and thanks as I found your channel because of it. Subscribed and thanks for the tips.

[@AlexanderDyer]

Great! Thanks for the feedback. I owe thejasonofalltrades a coffee, this was his idea and a very good one at that.

[@kim4561]

This is such a great video

[@stoneblue1795]

Great work you guys. I look forward to any/all vid's either of you post. Inspires me to make something or get back on task with a half completed project I may have walked away from...

[@AlexanderDyer]

Thanks J.P. Stone. Always good to hear from you.

[@lindamendoza2792]

Thank you for these helpful tips. Have a nice day and week to come.

[@AlexanderDyer]

Thanks, you too.

[@fanitram]

Is it possible to the unwind bobbin with the machine?

[@eddielamont9085]

Great video.., I have a console industrial model number 7360 R .I am sewing basic denim... My needle keeps breaking!! It works fine on other material.. But as soon as I get some denim under there like a hem, etc, the needle breaks Now I am using Organ Needles, 110/18. DB x 1. What is the strongest needle that I could possibly use???

[@AlexanderDyer]

Probably the machine, more so than the needle. The feeding mechanism is perhaps not that well suited for the material. Remember, no machine does everything. Industrial sewing machines are specialized.

[@aaliyahimmanuel1096]

hi and thank you for using an old machine for this tutorial. i have an extremely old toyota brand ydk model ym 140-A machine n was wondering if you could guide on how to thread it.

[@AlexanderDyer]

Sorry, I don't have that one. I encourage you to look through my videos and see if one of the machine looks similar to yours and then see if you can use that to inform your endeavor. Good Luck and Thanks.

[@imalover4011]

Very constructive, thank you.

[@AlexanderDyer]

💥

[@cutformllc3451]

A tip you could share is to use Neodymium magnets glued to the front of the machine to hold your screwdriver, pins, or whatever else is metal that you need to have handy without getting lost in your drawer

[@AlexanderDyer]

Thanks for your comment. I am not a fan of that tip personally and so I won't make it but I am sure it is fine for some. I have had several antiques over the years that have had the finish mutilated from pins being stored on a sleeve around the machine. We all do things a bit different and that is a good thing.

[@sharonbaughman7414]

Love the tip on avoiding the skipped stitch. Just subscribed. Looking forward to future tips from you and Jason.

[@AlexanderDyer]

Cool, Thank you, Welcome!

[@josephnjuguna5261]

Kihejo

[@peggylooby631]

I love your machine! Your tips were pretty good too! Thanks for sharing!

[@AlexanderDyer]

Thanks

[@kiwipommiegirl]

Very helpful tips for a beginner sewer like me,thank you!

[@AlexanderDyer]

Glad to help, Thank you.

[@mikayle3028]

I want to learn more on how to use the sewing Machine in a techniques way . And also in making dress as well . Thank you .

[@Braz1956]

Have you thought of doing tour videos of your sewing and woodworking areas? Since everyone approaches things differently, I always like to see how others organize and set up their shops.

[@AlexanderDyer]

I have thought about it but I'm not sure. I feel shy about it. I do appreciate your suggestion, maybe I will work up the courage one day.

[@a.k.7183]

You should do it! I’m with this viewer- I would love to see how you have everything situated for sewing. We could learn a lot from it ya know! ;)

[@angelarobinson7717]

Please could I ask, I've received I very dirty oily bothers industrial sewing machine, I've clean most of the brown old oil off around the top, It's not self oiling, So do you have any tips on that ?? Not sure where to start with the over-locker that came with it, just the motor carries on when you turn it off, haven't cleaned it yet. thank you for reading Kind regards Angie

[@AlexanderDyer]

Manual oiling is not hard. Just a single drop of oil can lubricate any point where any parts move against each other. Use only clear sewing machine oil. Watch this too. kzbin.info/www/bejne/kKG1Y2mwnailhqs and I oil a machine in this video too. kzbin.info/www/bejne/bXaklYSLeKlnkLc Hope you can find something useful.

[@tonicoote6388]

Very informative. Thanks for sharing.

[@Manotz]

Wonderful tips...

[@angelasheppard7197]

Which inexpensive machine would you recommend for a somewhat beginner quilter/mender

[@carolinepalatucci3414]

Great Tips Thank you

[@AlexanderDyer]

You are welcome, glad you liked them.

[@brucevilla]

Thanks for Uploading.

[@mjp5129]

You didn’t mention skipped stitches. 🤨 My brother industrial will sew some stitches and then skip. Sewing vinyl mostly. Do you have any advice. It’s DB2 B755-3

[@1tinac]

Thank you for sharing.

[@adele2382]

Thank you, from the first tip to the last. Less aggravation and more time to be creative. 👍

[@nancylourose]

last two tips were helpful, thanks

[@AlexanderDyer]

🎥

[@janetcozens4623]

Really great tips and advice thank you so much

[@bibijaikaran1840]

Very good tips

[@AlexanderDyer]

👊

[@wilkbor]

Thanks for the video. It's good to see you and Jason working together. Here's a question I left for Jason: how do you store thread wound on large spools. THe ones I buy don't seem to have a notch for keeping the loose end from unraveling while it's in storage. I'm using tape to keep it secure, but there has to be a better solution. Any ideas? Thanks again, KB.

[@AlexanderDyer]

For me it is not as much of a problem since these tend to hold still for long periods of time so often loose is how I go. I have used masking tape but I guess about the best proactive tip I could give is to cut a nick into the bottom edge of the plastic cone's lip and pull the thread down into that.

[@andreatommy217]

@@AlexanderDyer hi, I'm new to both you guys vids and love em!! I have a tip for that cone storage issue. I save garlic bulb netting. The kind that you buy at the grocery, covering the bulbs of gatlic. They slip over cones and spools nicely and hold the thread with out residues. I work with woven fishing line on some of my hand beading and sewing , these nets slip over these spools as well and keeps those ultra fine lines from making a huge mess. They can be ct down to accommodate smaller domestic spools as well. Even as i work to pull lengths as i need them leaving the tails free inside the netting. Another tip, this one for Jason. Those staples can make quite a mess on the floor or slip into your machines. Might i suggest a good magnet set close by as you work them out. You can , lol, almost fling them in the direction and the magnet will collect rhem. Keeping your surface, your floor and your machines clear of stray wire. Hope these are helpful. I know your tips and vids are a huge help to me. Thanks again.

[@monicahaigh4490]

Thanks for some great tips

[@AlexanderDyer]

Thanks for your comments. I appreciate you taking the time.

[@poppygallagher8521]

Thanks so much! Your always so helpful.

[@AlexanderDyer]

Glad I could help, thanks.

[@ronmartinmhg2804]

Good clear video. It seems like you thread your needle from side to side. My needle threads from front to back making it more difficult to thread. Am I putting the needle in incorrectly or are some machines different to others. A stupid question maybe

[@AlexanderDyer]

Your inclination is correct. Not all machines are the same and it depends on the design of the machine as to which way the needle goes. Follow your machines specification.

[@IsaiahThirtyTwenty]

If you notice the position of his bobbin housing, its on the side so the threading goes from side to side in line with the housing. If your bobbin housing is in the front, then you would thread your needle from front to back.

[@BarryGlusman]

I have db2 is there a return spring or a spring that operates the dogs I have looked at my working 737 and cannot figure out where the missing return spring is

[@AlexanderDyer]

There is no spring to operate feed dogs, they are controlled by a rotating cam.

[@christinemoritz9574]

Excellent

[@opaz3005]

Helpful thanks

[@OriginalR69]

.."like pushin' a rope uphill.." lol Yeah, that's ONE way to describe it ;) First time viewer of your content here.. G'day! Anyhow, I enjoyed your vid. Cheers :)

[@AlexanderDyer]

Thanks for you comments and Good Day to you as well. I am glad that you enjoyed the video

[@OriginalR69]

@@AlexanderDyer That's very kind of you to reply to my comment, Alexander. So many KZbinrs just don't.. Yes, even when they specifically ask you to leave a comment or question, or to introduce yourself if you're new subscriber, and say they will reply. I guess, like you, growing up in the 70's I was raised with a different standard of manners, eh? .. haha! Nah, just jokes (Yes, I understand creators with a large number of followers just don't have the time) Anyhow, that's my whinge for the day and my attempt at social interaction all rolled into one, all done! All the best and keep up the good work. I know where to come now next time my machine has a hissy fit ;)

[@JeffMyers-l7u]

I have that exact brother industrial machine, I just broke a needle and replaced it, now it won’t pick up my bobbin stitch?

[@AlexanderDyer]

If it is the correct needle then it is probably not installed correct. Watch this for helpful advice kzbin.info/www/bejne/b6jInGmVlquslassi=VyAfXtQF_cDnsWEC

[@crl52689]

Hi im a new subscriber! Your machines are absolutely amazing! I own a juki tl 2010 which I love but I do wish I had one of your machines! I am in awe of you! thank you so much for taking the time to teach us these things. It's unbelievably nice of you and so very appreciated! I have a question.. do you happen to know how to service your own machine. I need to get mine done, but I really dread being without a sewing machine for a week while it's being serviced! I love sewing too much! I need to start selling some of these bags I've been making and maybe buy another machine! I would want a work horse like one of yours!

[@AlexanderDyer]

Yes, I work on my own machines but I don't work on other peoples machines, weird right? Clean and oiled is all most machines need. Slight adjustments are sometimes in order and require only a bit of aptitude, patience and a few tools. I have shown a few adjustment videos but not many. Good luck in your hunt for your dream machine and I would love to see your bags.

[@crl52689]

Alexander Dyer how do I show you pics? An email maybe? I'll show you the big canvas tool bag you have a video on too that I was able to make because of you! ? My fabric wasnt as sturdy as yours. Thinking I should of done a stabilizer and a lining maybe.. I'll do another when I get the proper canvas! Not sure if I told you, I have a juki tl 2010. Great machine. But still want yours. What is the exact model of your juki workhorse?

[@crl52689]

Also do you sell industrial sewing machines? If so what is the lowest price point for a workhorse that you would recommend?

[@AlexanderDyer]

I sell some machines on eBay. My walking foot machines start at 750 plus shipping and these Juki's are around 1000

[@adorasmith4700]

Tks much

[@myreefaquariumisaabdulrahm4568]

I have one just like that one and i lilke ti to saw leather. What waking food you recommend

[@AlexanderDyer]

kzbin.info/www/bejne/q5KYkK1_jt2Bpqc kzbin.info/www/bejne/opPLiKF_rNprqM0 kzbin.info/www/bejne/l6fVZKOElNqXg6M

[@daleodberg6714]

Real good!

[@terryivey5374]

Great video, thank you. Have to admit, you gave me a case of machine envy :) Just wanted to see and hear that baby sew.

[@AlexanderDyer]

Might I suggest this video that others have commented about liking the sound of. kzbin.info/www/bejne/nJS8daKXbruUr5Y and there are a few others. Thanks and enjoy.

[@zulaigaworth4401]

Thank you

[@AlexanderDyer]

🌟

[@richarortiz8586]

omg thank u so so much .. u show me more stuff I need it to learn I so appreciate u and ur videos thanks alot.

[@AlexanderDyer]

✨

[@deeztube1]

awesome! thanks much!!!

[@stonecrestquilt]

Where do you get your big BIG thread cones?

[@AlexanderDyer]

California Thread Supply and Wawak are worth looking into.

[@stonecrestquilt]

@@AlexanderDyer I always order from Wawak. Which thread is that big cone?

[@AlexanderDyer]

www.wawak.com/Thread/Thread-By-Use/Serging/spun-polyester-thread-tex-40/?sku=SPT110ACR

[@derekforestier1708]

I just wanted to say finding your channel is a god send. I have been hand stitching leather and wanted to get a machine. I found a singer 241-12, (curbside) that is in like new condition. I have never sewn on a machine so it has been difficult, but learned quickly I wanted reverse. My neighbor retired as an upholsterer at 91 and gave me his Mitsubishi DY 337. It needed a good cleaning and when I put it back together I think the timing might be off. I keep breaking thread and it looks like as it comes around the bobbin case it catches on something. First of any idea what it might be catching, or a good video to see how to adjust? Thanks in advance Derek

[@AlexanderDyer]

Here is a guy who is a master upholstery wizard and he works on a 241-12 to set it up for upholstery. You are so lucky. Watch this guy a lot. He has more than just this video so explore and let me know how it goes. kzbin.info/www/bejne/kIPEoIpvoLGSpbM

[@AlexanderDyer]

As for what it is catching on, Get a parts manual, you should be able to find a free one for download, then you can identify the part that it is catching on. That will then help you tell me what it is catching on. Really get in there a look closely, move the machine by hand as you look.

[@derekforestier1708]

Alexander Dyer thank you I did and. I video taped it. I took it apart and redid the timing and adjusted everything. I think it was when the thread came across the bobbin case it was catching the latch hinge. I took your advice and just ordered a servo motor, light, and I want to get a couple other accessories. When the thread spool is 1/2 full is it possible to get bound up? The thread gets tight and then breaks free. I have it on a setup where it pulls it straight up. Once again thanks for the reply and looking forward to binge watching your videos.

[@AlexanderDyer]

I'm not sure what is going on with your thread. Inspect it very close to try and Identify where and how it is catching.

[@derekforestier1708]

Alexander Dyer thanks for the suggestion, I am already following him, he is great. I think I am going to bring it to a shop and have them look at it. It binds as it comes across the bobbin case. I introduced thread thru the needle thinking it was pulling tight there but it’s not. The hole has plenty of room so that’s not the issue. I took your advice and bought a servo motor for it. The original one is one and runs real hot. Thanks for the reply

[@cakeshoe]

For beginners: some good tips -- especially about skipped stitches in corners, but I think you should have explained / shown what stitches look like when the tension is too lose or tight, rather than just saying "that's better". Nice machine, by the way.

[@AlexanderDyer]

Ha Ha, thanks for the critique. I only had room for 5, friend but if you are interested I have covered tension, in depth in this video.kzbin.info/www/bejne/r2PPpX6lr9GBsJo I appreciate your engagement, come back soon and often.

[@cakeshoe]

Ok. Good that you have already covered it - I had only stumbled upon THIS video, but SUBSCRIBED, anyway due to your catalogue of man-sewing projects 😁. Keep it up. Good stuff!

[@vintagesewingcentermuseum6636]

mr dyer , i am opening a hands on museum here in tulsa okla , new to sewing but through your videos and a few others we have learned so much information about our industrials . the admin of the museum suggested i ask you if we can run your videos in the museum . before you answer please visit Vintage Sewing Center and Museum on facebook and answer the question to get accepted that states the group is for recording the inception of the museum from day one when i had one machine one year ago till now . we have over 1000 machines and more are donated daily so this is a legitimate collection of machines and memoribilia . if this post is out of line no offense if you wish to delete it . oh , by the way , you crack my son and i up , thanks for that .

[@AlexanderDyer]

Go to main channel page, select the "About" tab and send me a message and leave me your email address.

[@gkshighfalutintubeexperien8205]

I wanna buy a sewing machine with different patterns which ones do you prefer ???

[@AlexanderDyer]

Pretty rare in industrial machines. As far as home machines go, I like the Singer 319 and the Singer 401 kzbin.info/www/bejne/kKG1Y2mwnailhqs kzbin.info/www/bejne/aqiXd2eBiMqaZ68

[@kiranjeetpandher198]

How much

[@marcoantoniomartinezcarril8646]

👍Aprendí mucho gracias

[@joelwestlin5202]

What model (number) is this machine? Can't see since it happens to be behind the reverse lever in this video. Thanks in advance!

[@AlexanderDyer]

Brother DB2-B791-005 🙂

[@jrg0143]

What do you and Jason make? Are you workrooms and do upholstery also? Just wondering. Thanks, love your videos!🥰

[@AlexanderDyer]

This is my hobby, so a little of this and a little of that. I mostly just like these machines and like to get them and make them run as good as I can.

[@lisastoner6635]

I have a really hard time using that kind of needle threader with a needle that is threaded from front to back.

[@AlexanderDyer]

It is pretty tricky with a double needle machine too. I tend to use bigger needles and so these work really good for me but they are not for every situation. Is there something that you prefer?

[@lisastoner6635]

Well, I have considered threading the sewing machine needle before I put it in the machine! ! (I have vintage sewing machines) There are a few other ideas I've read about: Sewing Machine Needle inserter and threader (fragile) Put white behind the needle to see the hole better Cut the thread at 45’ angle with very sharp scissors Stiffen the end of the thread with beeswax, water or saliva And I have the beeswax!

[@AlexanderDyer]

I do use the 45 degree angle technique and I have a magnifying hood and lots of light to help me see. This works pretty good. My mom says to lick the needle instead of the thread. Thank you for comments.

[@lesleygilbert1945]

I had the same idea of using a threader, but my needles thread from the front to the back and I find it too difficult to get the threader into the hole from the back, to pull the thread through, even after bending the thin wire and moving the needle shaft up and done for easier access - any tips for that? Thanks for the other tips :)

[@AlexanderDyer]

The needle threader won't work in every situation. Use fresh cut thread, don't lick it, lots of light, magnification and some nice tweezers and then you can get it every time.

[@lesleygilbert1945]

Thanks for the tip - I first read it as 'use fresh cut bread'!! haha I need new glasses :)

[@epoelker]

Hold a small scrap of white paper behind the needle. This makes it easy to see through the eye of the needle. I get the thread through the eye on the first try almost every time. Hope this helps.

[@geraldinelombardo7897]

I heard of a threading tip that works great. Instead of licking your fingers then the thread, lick your finger and pass it along the BACK of the needle. Wa la! I dont recommend licking the needle in the machine! LOL!

[@emeraldgypsyheart]

We call our test strips are called Frankstein. Thanks for tip 4.

[@JENNISWISS]

great video nice tips and very good content💪💪💪

[@AlexanderDyer]

😎

[@sqcrochet3812]

What is price this machine