alfa romeo cylinder head gasket instal

change cylinder head gasket for alfa romeo giulietta

[@MichaelHarwood0]

Wonderful video! I hope to see one on the Alfa 159 2.4 jtdm. Thanks

[@mechanical-MAT]

Thanks... in the future possible!

[@amanebeaute1562]

✅✅✅✅Naic

[@amanebeaute1562]

♥️♥️♥️♥️

[@postaraco]

Brilliant work

[@mechanical-MAT]

Thanks

[@matthiassieberer336]

A great job! Please do you have the Torque moments for the upper Head (Multiair head), the Multiair screws and the Camshaft brackets?

[@mechanical-MAT]

is 20 to 25 Nm for tightening all T45 bolts of the MA unit. At 23 Nm I had a perfect squeeze out of the blue sealing plastic at the both ends of the metal seal between block and MA unit. Be retightening the MA unit, I'd use a new metal gasket. Hope that helps

[@mechanical-MAT]

For a camshaft caps . 25.7NM to 31NM

[@matthiassieberer336]

@@mechanical-MAT thank you very much!

[@nathanhuggins1303]

34:00 Can someone please tell me the name of that part. mine is faulty but i cannot find a part number or figure out the name of it. Many thanks

[@floraaa9115]

Anasiiiib lah iwufaaa9

[@mechanical-MAT]

Amin

[@comfortmazibuko1921]

Great job, how did you remove the head it seems like it has been sealed.

[@mechanical-MAT]

Cylinder head gasket damage because no coolant

[@comfortmazibuko1921]

what must I use to take it out because a flat screw seems like will damage this thing any suggestion?

[@mechanical-MAT]

You had to unscrew the screws at the hot engine.

[@comfortmazibuko1921]

@@mechanical-MAT Thanks man I managed to take it out following your steps to reassemble it. so now I am on that final step of starting the engine I see it is taking longer to start it cranks and cranks the same as in your video, tell me what did you do to make it start?

[@mechanical-MAT]

@@comfortmazibuko1921 hi

[@mansaryoussef6587]

20w50 oil ?

[@mechanical-MAT]

In doha it too hot temperature

[@mechanical-MAT]

Only for frist start and engine flash. After 3 hour I change it 5w30

[@textilebuyingsourcing1045]

how much it cost for over hauling 147 1.6ts

[@mechanical-MAT]

For ove hauling it 5000qr labor charges + spar parts

[@jpcia260]

70 NM only? no 90 degrees add?

[@mechanical-MAT]

No 90 degrees add 👍

[@jpcia260]

@@mechanical-MAT That cant be right.... Checked, its 22NM, back 90 deg., then 22NM again, then 90deg, and then another 90 deg.... can you show a link where its only 70 NM?