Alfa Romeo Stelvio DIY full Lip kit

Alfa Romeo Stelvio full Lip kit install
This is my 2018 Alfa Romeo Stelvio. This is a DIY in how to install a full lip kit from MAXTON DESIGN. This is the process I took to get them installed.
If you guys like my content and would like to support my channel and allow me to continue to make DIY videos like this your support will be greatly appreciated.
cash.app/$RONDIYMODS
www.paypal.me/rondiymods
venmo.com/u/RONDIYMODS
Tool I used
Double side tape
Rubbing alcohol
Provided screws
Front
www.maxtondesign.co.uk/front-...
Rear
www.maxtondesign.co.uk/rear-d...
Sides
www.maxtondesign.co.uk/side-s...
Rear side splitters
www.maxtondesign.co.uk/rear-s...
IG: rondiymods?igsh...
DISCLAIMER: This video is not endorsed by, directly affiliated with, maintained, authorized, or sponsored by Alfa Romeo. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of RonDiyMods, I cannot guarantee against improper use or unauthorized modifications of this information. RonDiyMods assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. RonDiyMods recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of RonDiyMods, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not RonDiyMods.

[@Illyrian_Adventures]

im on my 5th alfa romeo right now and never had the need to change anything on them appearance wise. they just come perfect from the factory, from the rims to the body and color.

[@RonDIYMods]

I agree these are nice from factory but I like to put my own style to it. To each their own brother.

[@mickeywilliams771]

Bro, I ordered min last week, it arrived today. This lip changes the total look of the car. It balances the the look now from the front to the back. Bro they need to make you a sponsor for the US and get a promo code… $$$$$

[@RonDIYMods]

Thanks bro. Yeah this lip changes the look. It looks more aggressive and sportier. I love the look.

[@JohnDo-ntchaknow]

It really does make a noticeable improvement in the appearance of the vehicle.

[@RonDIYMods]

Yes it does. I’m loving the look.

[@1lobochris]

This has helped a ton thanks man. I will install mine this weekend!! 😊

[@RonDIYMods]

Have fun!

[@danilomancini1513]

Forever alfa Romeo 🙋‍♂️❤💯🐍🍀😎🇮🇹

[@RonDIYMods]

😎👍🏻

[@bpp325]

Nicely done and informative. Thanx.

[@RonDIYMods]

Your welcome

[@drjoshuasenne]

Dude that looks legit.

[@RonDIYMods]

Thanks bro.

[@loicecollins8158]

Beautiful. I wish I had someone to do mine

[@RonDIYMods]

Thank you.

[@dporrasxtremeLS3]

Get some tools and get in there! You Can Do It !!! Now that you seen it Done !!!

[@jmangualcruz746]

Nice. I have one Veloce. I already mounted the suspension but I would like to put thats lips. What's the make on lips and where you brought or order?? Thanks

[@RonDIYMods]

It’s a nice lip kit. I have the links posted in description of the video where you can order.

[@jmangualcruz746]

@@RonDIYMods Thanks for your help. Look great, aggressive and sport at the same time.

[@RonDIYMods]

@@jmangualcruz746 yes I agree

[@Ybshy]

Looks 🔥 bro, how much that kit cost you?

[@RonDIYMods]

Hey bro, thank you for the comment. If I remember correctly, I’m not too sure. I think it was around $600-700 for the whole kit. It might’ve been cheaper.

[@braviux]

Brother i own a 2021 stelvio ti sport.. you think this would fit no problem? I think they still look kinda the same

[@RonDIYMods]

Yes it will according to the maxton design website. I’m going to update the links tomorrow

[@ROxofficielRobo]

Hello, I would love to know if you are in the US or Canada, how much you paid in shipping

[@RonDIYMods]

I’m located in the US in California and I roughly paid about 180 if I remember correctly for shipping.

[@jonhamilton2962]

I'm thinking about picking up a stelvio and just asking how you like it?

[@RonDIYMods]

Honestly, yeah I like the look and I like the luxury of it and how it drives it’s a fun car

[@stagebug79]

Yo what’s the best way of gojng to install the diffuser piece it’s way harder then it seems ?

[@RonDIYMods]

It could be a bit tricky to install. Ok what I did is I ran a self tapping screw in the top middle of the diffuser. If you see my video at the 6:32 mark all the way to 7:05 I explain to location of the screws. So I had my buddy hold and push the diffuser in place in the middle so I could drill the self tapping screw that hold the diffuser in place in the middle. After the middle one is done. Then I had him push the left and right side tab in and so I can mark the location to drill out the holes. So when I go back and install the diffuser the holes are already their just to put the self tapping screws in. And for the last two holes on the bottom of it, I just drilled a hole big enough to use the existing hardware.

[@Enrique-yd4ei]

Maybe would be better with the black “V” too

[@RonDIYMods]

Yeah I’m getting the V in carbon. Will be installing soon

[@dugiklc]

Pozdrav, isntalirao sam prednji spojler i nakon toga mi se pale prednji parking senzori? Dali je imao tko slican problem?

[@RonDIYMods]

There’s no reason why your parking sensor should come up when installing the front lip. They are nowhere near the parking sensors. Just make sure that your screws didn’t hit any sensors.

[@ButterxClan]

whats the matte black trim u have around the car?

[@RonDIYMods]

Hello, my Stelvio is a 2018 model these models came with the black matte trim the newer models have painted to match trim so it’s stock but it’s just black matte new ones are color matched. The gloss black is a lip kit.

[@ButterxClan]

@@RonDIYMods damn i just picked up a 22 the black trim looks way cleaner especially w the kit

[@tomaszs6784]

would look much nicer with color painted plastics that you have around the car.

[@RonDIYMods]

That might be something I’ll do down the line.

[@thomasspencer483]

How did you put on your license plate?

[@RonDIYMods]

It’s actually how it come from dealer. But it screwed on to the bumper it self.

[@thomasspencer483]

@@RonDIYMods I hate to drill holes on my bumper, but it looks good. I might just have too. Thanks.

[@dtowndurango]

Dope. U think this would fit the Guilia ?

[@RonDIYMods]

This company has a kit for the Giulia www.maxtondesign.co.uk/body-kits/alfa-romeo/afla-romeo-giulia