Alibaba eBike Display & Controller settings = Yolin YL90T-H

  Рет қаралды 14,086

B Rich Solution

B Rich Solution

Күн бұрын

Пікірлер: 252
@hamishmmc
@hamishmmc 2 жыл бұрын
so looking forward to receiving mine! all based on your content
@BRichSolution
@BRichSolution 2 жыл бұрын
It’s a awesome bike for the money. Ive been looking at many other bikes and nothing compares to this bike for the money. I might order a 2nd bike for a buddy to ride
@silbernersurfer8264
@silbernersurfer8264 2 жыл бұрын
Great video, thank you! Thanks for the manual as aPDF. The plug in the manual is green and round. Thats possibly UART. That means that possibly the Bafang programming cable could be used to program the controller. Not sure about this! I will see it when my bike has arrived. It is shipped by train since 5 days. Usually it needs 40 to 60 days to arrive.
@BRichSolution
@BRichSolution 2 жыл бұрын
Let us know when you receive your bike and tinker with the settings.
@silbernersurfer8264
@silbernersurfer8264 2 жыл бұрын
@@BRichSolution I will report!
@Nevercholt
@Nevercholt Жыл бұрын
@@silbernersurfer8264 Did you receive your bike yet?
@silbernersurfer8264
@silbernersurfer8264 Жыл бұрын
@@Nevercholt Received the bike. No time to tinker with the controller. Max speed at the moment measured 45kmh.
@carlosjimz
@carlosjimz 2 ай бұрын
Great video and thanks to the person who posted how to fix the speed limit by turning on the bike and depressing the brake at the same time for 20 seconds and going full throttle after. Mine is I bike from Amazon with different frame and cargo basket in the back dual motor at little over $800 with speed of 15mph but after the trick went to 30mph Thanks
@BRichSolution
@BRichSolution 2 ай бұрын
Glad it helped!
@HackAllTheThings
@HackAllTheThings Жыл бұрын
Thank yo so much! You saved my behind! I was locked out of my screen from experimenting the manual you posted was helpful! For future ref default password is 1212 😅
@BRichSolution
@BRichSolution Жыл бұрын
Glad it helped!
@deseanp827
@deseanp827 6 ай бұрын
PW has since been changed to 1313
@MarkSvara
@MarkSvara 4 ай бұрын
How do I know if my controller is locked with a password?
@Nikolai-xu3zl
@Nikolai-xu3zl Жыл бұрын
Thanks for the video and pdf.
@BRichSolution
@BRichSolution Жыл бұрын
Im glad it can help you
@chrislee4744
@chrislee4744 Жыл бұрын
Thank you Sooooo Much you got me out of trouble. There was a setting off on bike. He did not run you are magic.
@BRichSolution
@BRichSolution Жыл бұрын
Congrats
@ChosenD1P
@ChosenD1P 10 ай бұрын
On the pro the on and off switch is for the front motor. The headlight is controlled by the button on the controller just like you hoped yours would work. I can turn my light on or off with the gray buttons headlight pic.
@BRichSolution
@BRichSolution 10 ай бұрын
Okay good info
@lesleiscaranelo7565
@lesleiscaranelo7565 9 ай бұрын
_Wow, what a class! _Thank you for sharing this information with us!!!
@BRichSolution
@BRichSolution 9 ай бұрын
Glad you enjoyed it!
@BRichSolution
@BRichSolution 9 ай бұрын
Glad you enjoyed it!
@silbernersurfer8264
@silbernersurfer8264 2 жыл бұрын
The ON/OFF switch on the left side is for the dual motor set up. Off is only rear motor, on is rear and front motor.
@BRichSolution
@BRichSolution 2 жыл бұрын
I only have the single motor bike. I think the dual motor is limited to speed of 25; Ive heard other people comment or complain that the dual motor top speed is limited
@silbernersurfer8264
@silbernersurfer8264 2 жыл бұрын
@@BRichSolution No, my dual motor bike goes faster than 50kmh.
@Nevercholt
@Nevercholt Жыл бұрын
@@silbernersurfer8264 Same for mine, my dual motor variant reaches 57 km/h
@silbernersurfer8264
@silbernersurfer8264 Жыл бұрын
@@Nevercholt Depends on your settings off wheel diameter! I suggest getting measurements over GPS or something similar.
@thetechgenie7374
@thetechgenie7374 Жыл бұрын
@@BRichSolution I get 28 to 29 on the dual motor version and heavy guy.
@theblowupdollsmusic
@theblowupdollsmusic 5 ай бұрын
Thank you for taking the time to put this together. Is there a way to show battery percentage? Or voltage level? I have no idea what the five bars are set to voltage wise. They're older controllers are not 20% each bar, the first bar is 40% voltage. Unfortunately it's not in the manual.
@BRichSolution
@BRichSolution 5 ай бұрын
No i wish there was
@Victor842
@Victor842 2 жыл бұрын
I talked personally with the factory sales manager. He told me this; -P6 is not available to modify in the (jingyu-yolin e bikes). They programmed (in the controller, not the display) the speed average to 30km/h in the "locked" mode and 50-55 km/h in the unlocked speed limit. -P8: you can not modify this. the bike it´s set to pedal assist + throttle mode. you can not turn OFF the thottle in the display. In EUROPE in general, the throttle it´s not allowed to use in a E-bike, NOT LEGAL. So you have to raise the seat and disconnect the throttle cables.
@BRichSolution
@BRichSolution 2 жыл бұрын
Good information thanks for sharing
@alnikocrypto6875
@alnikocrypto6875 Жыл бұрын
I received my bike today.. live in Europe.. is it easy to disconnect the throttle cables? Are cables marked?
@Victor842
@Victor842 Жыл бұрын
@@alnikocrypto6875 yes, talk to them via alibaba messages they will send you a photo or video
@alnikocrypto6875
@alnikocrypto6875 Жыл бұрын
@@Victor842 thanks mate!
@kikobeats
@kikobeats 8 ай бұрын
@@alnikocrypto6875 Hey, did you find the way? can you please share any information related with disabling the throttle? 🙏
@thewillvazquez
@thewillvazquez 2 ай бұрын
@brichsolution I just received this exact bike from Alibaba last night. Went for a test ride and followed all your instructions, but the bike still won’t go faster than 16mph. I asked the manufacturer and they said to hold one of the brakes for 20-25 seconds while powering on the bike, but it still won’t go over 16mph. What do you suggest I do?
@BRichSolution
@BRichSolution 2 ай бұрын
Did you buy a bike with 500W motor or 1000W? Is P02 in advanced set to 48V or 52V depending on batteries? Is P06 is set to set to 100?
@thewillvazquez
@thewillvazquez 2 ай бұрын
1000W rear motor (non-Bafang) / P02 48v / P06 at 100% I had to set P05 to 1-9 for mine to go fast
@thewillvazquez
@thewillvazquez 2 ай бұрын
@BRichSolutions do you ever have the issue where you charge both batteries at the same time, one finished charging but the other battery just stays charging?
@crookedletterg
@crookedletterg 3 ай бұрын
I have a 52v battery but I was thinking of switching to 48v on the yolin display screen would it affect battery ?
@BRichSolution
@BRichSolution 3 ай бұрын
No you can go down to 48v without issue
@kafkent6727
@kafkent6727 8 ай бұрын
Hi, I'm looking for the Crazybird color screen manual, do you know if this is the same.... apologies for the question 😊 I just can't find out anywhere else. Thanks 👍😊
@BRichSolution
@BRichSolution 8 ай бұрын
Ask manufacturer for user manual
@DanielMondor-g3n
@DanielMondor-g3n 10 ай бұрын
Hi, I really liked your explanation, it's great, but I have a question, I have almost the same bike as you, I have two batteries and two motors, and on the instruction booklet, on the controller: Model, YL-90T-H, it shows two battery indicators, how do we get both battery indicators? THANKS
@BRichSolution
@BRichSolution 10 ай бұрын
Good question but not sure how. I will ask seller
@theblowupdollsmusic
@theblowupdollsmusic 5 ай бұрын
Did you ever get an answer on how to show percentage either? Or battery voltage? It's not in the manual.
@censorshipisreal3553
@censorshipisreal3553 11 ай бұрын
I have the same bike but with two motors front/back wheel. The headlight button on your bike switches my front motor off/on and the dimmer switch on your bike controls my head lamp/dimmer.
@BRichSolution
@BRichSolution 11 ай бұрын
Very cool
@SCHOTTIE65
@SCHOTTIE65 11 ай бұрын
First of all thank you very much I've been trying to figure out how to put it on miles per hour your video is awesome I really appreciate now I have a question I have two 1,000 w motors 2000 w e bike and I travel about 20 miles back and forth to work when it's not snowing I'd like to shut one of the motors off and I think I can do that on p8 now will that hurt anything if I only run one motor going down the road. I hope it's not a dumb question but like all my bosses ever said there's no dumb question only dumb answers
@BRichSolution
@BRichSolution 11 ай бұрын
I would shut the battery off that drives the front motor is the easiest way
@mariuskalnins4311
@mariuskalnins4311 8 ай бұрын
Hi. One more question. I can't find a suitable julet cable. There it turns out 1to6 and the main cable is 10pin. Where can I buy it? Or where to find information with pinouts. I'm trying to fix it up myself, but the throttle doesn't work. Or, on the contrary, the wheels slowly rotate on their own.
@BRichSolution
@BRichSolution 8 ай бұрын
Ask manufacturer for cable
@mariuskalnins4311
@mariuskalnins4311 8 ай бұрын
@@BRichSolution Yes. Finaly I Found it in official webshop. Great. Thank you.
@MarkSvara
@MarkSvara 4 ай бұрын
Hey awesome video. Need some help. I have a totem bulldog with this exact display. I was able to perform a factory reset twice but I cannot get into the personalization menu. Do you think this was hard coded at factory deliberately?
@BRichSolution
@BRichSolution 4 ай бұрын
sounds like its locked. Contact Totem and ask them for password to unlock
@MarkSvara
@MarkSvara 4 ай бұрын
@@BRichSolution tried. They won’t budge.
@MarkSvara
@MarkSvara 4 ай бұрын
@@BRichSolution btw how do you even get to input the password?
@MarkSvara
@MarkSvara 4 ай бұрын
@@BRichSolution tried, no luck. They won’t budge. I took some time today to open the controller and man what have they done! The entire inside of the controller is filled completely with a grey silicone rubber type material. I assume it’s heat absorbent but there’s no fixing that controller. Why would they fill it with that?! The controller is a b-wzkd4825ka-f4
@floydcodlin8447
@floydcodlin8447 11 ай бұрын
HI there, I bit the bullet and brought the Yolin e-bike, nearly finished setting it up, only to find that the cable attached to the main front light, does not go all the way into the connector. Am I doing something wrong? Appreciate, any help you can give
@BRichSolution
@BRichSolution 11 ай бұрын
Headlight connector should go all the way in
@floydcodlin8447
@floydcodlin8447 11 ай бұрын
@@BRichSolution I will give it another try
@floydcodlin8447
@floydcodlin8447 7 ай бұрын
Hi there, the manual shows both batteries on the display, but for some reason, only one of the battary level indicators is showing...Why do you think this is?
@BRichSolution
@BRichSolution 7 ай бұрын
Not sure why the display cannot show both batteries, most likely controller does not have the function. I usually toggle back and forth between batteries and shut the bike off and turn back on to get accurate reading
@floydcodlin8447
@floydcodlin8447 7 ай бұрын
@@BRichSolution The manual does show the two battery symbols, but I can live without that tbh. What's more worrying, is that despite the left battery being at full charge, it does not kick in when the battery on the right runs low. Could it be something to do, with the battery cradle?
@aymanzarouali3075
@aymanzarouali3075 2 жыл бұрын
What did the seller told you about shipping time and how long did it actual take to ship, he told me 38-41 days if he is right I have 1 to 2 weeks left to wait
@BRichSolution
@BRichSolution 2 жыл бұрын
shipping was more like 75 days, but not sure if it was because I was in Florida or time of year
@DyLemmaOG
@DyLemmaOG 2 жыл бұрын
38-41 days was about right. I got mine somewhere between 38-41 days
@alnikocrypto6875
@alnikocrypto6875 2 жыл бұрын
hi, great videos.. does the bike have a torque sensor?
@BRichSolution
@BRichSolution 2 жыл бұрын
No torque sensor only Cadence sensor
@ot5340
@ot5340 Жыл бұрын
Do you if i can replace this display with a bafang display. I need something that reads the voltage
@BRichSolution
@BRichSolution Жыл бұрын
I think you can replace with bafang screen if you have a bafang motor?
@zeusebikes
@zeusebikes 6 ай бұрын
mine won't go faster than 55kph even though I changed the speed limit in the setting to 100kph, do u know if there is a way of removing the speed limit completely
@BRichSolution
@BRichSolution 6 ай бұрын
55kph is about as fast as 48V or 52V battery will allow. 100 kph max means speed is not restricted. $5000 super 73 ebikes only go 50kph
@bbobby15
@bbobby15 7 ай бұрын
i just got mine today .. all black , dual battery 48v 22 amp ..only one motors ,1000w bafang . but the max speed on truttle only was 28 mph -45 km/h.. im a bit disapointed 😓
@BRichSolution
@BRichSolution 7 ай бұрын
Check your speed with GPS app, screen on the bike is not accurate. Also when the weather is warmer or long straight aways the batteries will level out and then peak power kicks in and should get you to 31 mph or 50km/h Yes bafang is slower motor thats why in many reviews specify the Xiongda motor. 52V batteries would have helped too. 52V with bafang should get u to 33mph
@bbobby15
@bbobby15 7 ай бұрын
thank you for this information . yes its still cold a bit here maybe thats wy .. im not good with order online .. i got my bike on fb market ,new ,0km on the screen and the battery still in the package.. also the tire were perfect imaculate condition he was asking for 2600$ canadian money i gave him 2300$ ..is this a good price ? at least i didnt wait 2 months..
@ricardomonteiro5555
@ricardomonteiro5555 9 ай бұрын
I just bought a yolin bike and its giving the 05 error which is a brake failer, do you know how i can fix this problem? Thanks
@BRichSolution
@BRichSolution 9 ай бұрын
Try flicking the brake levers as the sensor maybe stuck. I had this happen on another ebike. If that doesn't work disconnect brake sensor line to the controller to clear error and if that works as seller for replacement brake lever
@jimworsham1649
@jimworsham1649 4 ай бұрын
How can I get my bike to go faster than the factory settings if you could help me out I'd greatly appreciate it
@BRichSolution
@BRichSolution 4 ай бұрын
See video and change p6 setting to 100
@bbobby15
@bbobby15 7 ай бұрын
I saw a video of a guy that unplugged a wire from is controller to turn off speed limit , do you think its possible ?? because my yolin is stuck at 28 mph but seems that he can go faster , even if im pedaling it stuck there At 28 mph even if i changed the limit on the screen display…
@BRichSolution
@BRichSolution 7 ай бұрын
Did you opt for bafang motor and 48V? If so the bafang is slower then cheaper Xiongda motor.
@bbobby15
@bbobby15 7 ай бұрын
i did
@DeviceOverDose
@DeviceOverDose Жыл бұрын
Awesome video. How do I get into the cruise control 🤷🏾‍♂️ I tried holding negative for 3 sec @ 10mph in PAS 1... and I got nothing... any tips..
@BRichSolution
@BRichSolution Жыл бұрын
I could not get the cruise control to work either. Another alternative is adjust the cadence sensitivity and select the PAS level and lightly pedal and you can release the throttle and cruise at desired speed
@DeviceOverDose
@DeviceOverDose Жыл бұрын
@@BRichSolution Nice work around, thanks... 🤔 something strange about that cruise control claim 😏... Nice device otherwise ...
@Subcribe_for_Subscribe
@Subcribe_for_Subscribe 8 ай бұрын
@@DeviceOverDose did you figure out how to use cruise control yet?
@tenncutt
@tenncutt 6 ай бұрын
Hold the + button until the cruise symbol comes on then maintain a fixed throttle speed for 8 seconds
@TelepathicSchizo
@TelepathicSchizo 6 ай бұрын
@@tenncutt did it work? my thumb gets so sore going speed 9. the pedals do not grip at speed 9.
@HoangNguyen-xc7sd
@HoangNguyen-xc7sd 6 ай бұрын
Do you know why my lcd speedometer display shows 0 when I throttle up , and when I release it then It shows the speed on it. I can never get the speed show when I throttle.
@BRichSolution
@BRichSolution 6 ай бұрын
Not sure
@Karabas-Barasbas5
@Karabas-Barasbas5 5 ай бұрын
Hello, thank you for the video it's very helpful and great. I can't access set up mode by pressing + and - . Is there is another way how to access set up mode ?
@BRichSolution
@BRichSolution 5 ай бұрын
Hold the + and - buttons for 3 seconds. If locked ask seller for password
@Karabas-Barasbas5
@Karabas-Barasbas5 5 ай бұрын
@@BRichSolution Hi, thank you for your input. And where should I enter the password ?
@Karabas-Barasbas5
@Karabas-Barasbas5 5 ай бұрын
@@BRichSolution I think I found it. Could you please explain how to enter it ?
@ehisasia
@ehisasia 4 ай бұрын
good morning please my ebike is on PE I don't know what to do to resolve it please help me out
@BRichSolution
@BRichSolution 4 ай бұрын
PE is password activated see page 13 of user manual drive.google.com/file/d/1Rk7iSs0_lVSC2uSJVsuj94h9z_fuZ7xR/view?usp=sharing
@peterclondas3948
@peterclondas3948 2 жыл бұрын
My bike just arrive yesterday. Love it! I went with the dual motors. Climbs hills like a dream. I saw the setting to adjust the max speed, but it still only tops out at 25 mph. Does anyone know way to increase?
@BRichSolution
@BRichSolution 2 жыл бұрын
Another person posted the same thing. I believe the dual motor draws too much current to each motor it limits the top end speed. To confirm this unplug the front motor cable from the controller and do a speed test with only the rear motor so it gets the full 25amps
@billy_wizz
@billy_wizz 2 жыл бұрын
It's not down to having dual motors. I disconnected one motor and still had a the hard limit at circa 25mph when running one motor (wheels in the air). Either there is a enforced limit or the controllers are underpowered and maxing out.
@billy_wizz
@billy_wizz 2 жыл бұрын
I suspect they have different/better controllers shipped with the single motor version...or the controllers they have shipped with changed recently.
@billy_wizz
@billy_wizz 2 жыл бұрын
I've read that there could be a single (normally white) wire that can be disconnected from the controller and it will unlock the full speed. I can't test on my bike as I'm away but someone may be able to verify if this unlocks the speed restriction.
@SneedsBerg
@SneedsBerg Жыл бұрын
@@billy_wizz have you tried?
@gustavovaldez1544
@gustavovaldez1544 8 ай бұрын
I have almost the same bike with the same display. But it's limited to only 15 mph. I was trying to figure out how to program it myself but I have no luck. I might have to do a factory reset I'm not sure is there a way that I can program it in order for it to go faster
@BRichSolution
@BRichSolution 8 ай бұрын
Make sure p6 is set to 100 like shown in video
@gustavovaldez1544
@gustavovaldez1544 8 ай бұрын
@@BRichSolution Yes. I've tries doing that. Am I supposed to lift the bike up so both wheels are off the ground to set the speed? I have tries everything on the video.
@carlosjimz
@carlosjimz 2 ай бұрын
​@@gustavovaldez1544mine goes 15 mph as well I'm trying to figure out, maybe the wheel size will do it, and also I don't know how to make only one wheel drive
@DevinHarwell
@DevinHarwell Жыл бұрын
Thank you for this video. Have not been able to find any literature on this display. We had this code PE on the bike for two days realizing that with this video, we accidentally put a passcode on our bike any suggestions on how to bypass?
@DevinHarwell
@DevinHarwell Жыл бұрын
Found the default passcode via the attached user guide. Extremally helpful thank you!
@BRichSolution
@BRichSolution Жыл бұрын
Glad it helped
@BRichSolution
@BRichSolution Жыл бұрын
Does factory reset work?
@steelrain9159
@steelrain9159 Жыл бұрын
Im having same issue but default 1212 does not work. Bike is useless without knowing the code. Locked out.
@AmitDhankhar01
@AmitDhankhar01 8 ай бұрын
hi you found any solution with me same situation 😢
@famtone47
@famtone47 Жыл бұрын
hi there, is this controller compatible with KDS protocol?
@BRichSolution
@BRichSolution Жыл бұрын
Not sure
@kikobeats
@kikobeats 8 ай бұрын
Did you find a way to disable throttle?
@BRichSolution
@BRichSolution 8 ай бұрын
No thru display. You can unplug it from controller will disable it
@dalehoward62
@dalehoward62 Жыл бұрын
I have this exact Yolin YL90T-H display. Any help on this PE would be great. I accidentally set a password on my Power-on password setting(PE) and now I am virtually locked out of my ability to go beyond the PE display. No idea how to get out and reset my display. Thanks in advance..........Dale.
@BRichSolution
@BRichSolution Жыл бұрын
Do a factory reset see manual for how to perform
@dalehoward62
@dalehoward62 Жыл бұрын
I can't get out of the PE setting. Do I have to replace my display? Thanks B Rich @@BRichSolution
@doggydas23
@doggydas23 Жыл бұрын
​​@@BRichSolutiondidn't work still locked out in the PE mode. Factory reset didn't work hold the light and the plus down at the same time is the FACTORY RESET for the Yolin LED. Didn't work still stuck
@deaconx55
@deaconx55 6 ай бұрын
I couldn’t find the pdf on this iPad. Can you send to me please? Thank you
@BRichSolution
@BRichSolution 6 ай бұрын
Below is a link to PDF of the under manual: drive.google.com/file/d/1Rk7iSs0_lVSC2uSJVsuj94h9z_fuZ7xR/view?usp=sharing
@deaconx55
@deaconx55 6 ай бұрын
@@BRichSolution thank you so much for doing that ! if I get in over my head ,could I hit you up for advice ?
@thehighriseconstructionob9679
@thehighriseconstructionob9679 3 ай бұрын
My millage is 5 mile slower how can I change it please let me know
@BRichSolution
@BRichSolution 3 ай бұрын
Change wheel size in settings to 23 which is outside diameter of the 20 inch wheel
@SeanGilchrist
@SeanGilchrist 7 ай бұрын
Pressing + and - didn't open the parameters menu. Any suggestions?
@BRichSolution
@BRichSolution 7 ай бұрын
Hold the + and - for 2-3 seconds
@SeanGilchrist
@SeanGilchrist 7 ай бұрын
I did that, but no menu came up. ​@@BRichSolution
@MarkSvara
@MarkSvara 4 ай бұрын
Same here
@graffiti868
@graffiti868 Жыл бұрын
Hello, I have a problem, I adjusted the YL 90 T-H screen of my SameBike RS-A01 bike, but when I open the screen, the PA is displayed, and asks for a setting 000 0 . I do not know what to do. I don’t know how to do it with the manual. May i do a factory reset? Is it dangerous to do?Please kindly help me.
@BRichSolution
@BRichSolution Жыл бұрын
Try a factory reset or reach out to seller for password
@graffiti868
@graffiti868 Жыл бұрын
@@BRichSolution ok I’ll wait for the seller’s answer
@graffiti868
@graffiti868 Жыл бұрын
The seller is SameBike store. I am French and it is not easy to reach them..
@graffiti868
@graffiti868 Жыл бұрын
yolin answered me, there is an initial code 1212. again thank you for your answer.
@imadsuper4307
@imadsuper4307 Жыл бұрын
@@BRichSolutionhi there! How do I do the factory reset? That would be so helpful🙏🏽
@helenkarterQ
@helenkarterQ Жыл бұрын
when I start my display on my bike it shows 4 numbers and PA but I can't change anything, do you know how I can solve it?
@BRichSolution
@BRichSolution Жыл бұрын
I don’t know password message the manufacturer and ask them? 9999 or 1234?
@helenkarterQ
@helenkarterQ Жыл бұрын
9999 or 1234 Would that be a possible password? Why when I start it appears 0000 PA
@tenncutt
@tenncutt 6 ай бұрын
1212
@jasonbaker9507
@jasonbaker9507 5 ай бұрын
my display only shows one battery i have 2 and only on battery is being used why ridstar Q20 pro
@BRichSolution
@BRichSolution 5 ай бұрын
All dual batteries only show one battery i the display as the batteries combine outside of the controller. What I do is start out on one battery until 2 bars are left, shut battery off then switch the 2nd battery and ride that to 1-2 bars left then shut bike off and turn both on for the ride home
@graffiti868
@graffiti868 Жыл бұрын
Hi, do you have a french manuel pdf? Best regards. I tried, but I couldn’t.☹️
@BRichSolution
@BRichSolution Жыл бұрын
I do have french. You can translate manual from english to french using google
@graffiti868
@graffiti868 Жыл бұрын
@@BRichSolution i tried, but i couldn't ☹️
@graffiti868
@graffiti868 Жыл бұрын
@@BRichSolution now it's ok. best reggards
@graffiti868
@graffiti868 Жыл бұрын
my display is yl 90TV and not yl 90TH. there are differences of settings.
@KylesYTU
@KylesYTU Жыл бұрын
Anyone know how to bypass the speed limiter? I used to be getting 30mph and now out of the blue I’m getting a max of 15 mph
@BRichSolution
@BRichSolution Жыл бұрын
You cannot change it higher than 30? The setting is in km / h and I have mine set to 100 km/h and get to 35 mph in long straights
@KylesYTU
@KylesYTU Жыл бұрын
@@BRichSolution nope, I’ve tried everything
@saulGjr
@saulGjr Жыл бұрын
@@KylesYTU did you figure out your problem?
@KylesYTU
@KylesYTU Жыл бұрын
@@saulGjr I found out how to get back to the 30 mph. 1) Turn off the bike 2) squeeze one of the brake levers 3) while holding the brake lever turn the bike back on 4) keep holding the brake lever for 20 seconds 5) after 20 seconds let go of the brake lever and immediately give the bike throttle while also increasing the bikes max power to (5)
@saulGjr
@saulGjr Жыл бұрын
@@KylesYTU good information to know. Maybe make a video explaining your situation and how you resolved it for future riders. I'm getting my bike in a couple weeks and just was curious if you resolved your issue 👌
@dnbqup
@dnbqup 2 жыл бұрын
Is there a horn?
@BRichSolution
@BRichSolution 2 жыл бұрын
Yes, the horn is the yellow button on the headlight switch. I forgot to include it
@SCHOTTIE65
@SCHOTTIE65 11 ай бұрын
Well I thought that would shut one of the motors off p8 but it doesn't unless I'm doing it wrong
@BRichSolution
@BRichSolution 11 ай бұрын
I would shut the battery off that drives the front motor is the easiest way
@mariuskalnins4311
@mariuskalnins4311 Жыл бұрын
Hallo. I have error 4 ,do you know what that mean,Controller is death?
@BRichSolution
@BRichSolution Жыл бұрын
see user manual last page. drive.google.com/file/d/1Rk7iSs0_lVSC2uSJVsuj94h9z_fuZ7xR/view?usp=sharing E004 is throttle error; did the throttle get damage or wet? Ask Victor or manufacture for a new throttle or this will work but not sure how to splice in to power to get voltmeter to work amzn.to/3qiIygc
@mariuskalnins4311
@mariuskalnins4311 Жыл бұрын
@@BRichSolution I disable trottle via menu and error is gone . Thanks alot for help.
@monstermusicc
@monstermusicc 6 ай бұрын
how to set up two-wheel drive ???
@BRichSolution
@BRichSolution 6 ай бұрын
Should be from get go
@jimworsham1649
@jimworsham1649 4 ай бұрын
How do I get this bike to go faster?
@BRichSolution
@BRichSolution 4 ай бұрын
See video and change p6 setting to 100
@thierryweissenbacher
@thierryweissenbacher 10 ай бұрын
When I switch ON the display, and go to parameter mode, it start with P0, impossible to go to P1 etc... Anybody can help to move to P1, P2...
@BRichSolution
@BRichSolution 10 ай бұрын
Are you prompted for a password? If so I heard password 1212 and if that doesn’t work ask seller
@badermohamed32
@badermohamed32 Ай бұрын
i still can't figure out the pc stand for?
@BRichSolution
@BRichSolution Ай бұрын
PC is controller current settings. See page 12 of full user manual drive.google.com/file/d/1Rk7iSs0_lVSC2uSJVsuj94h9z_fuZ7xR/view?usp=sharing
@hamid5720
@hamid5720 Жыл бұрын
Can u turn off 1 motor in the display to?
@BRichSolution
@BRichSolution Жыл бұрын
I have the single motor ebike. I believe you can turn off 2nd or front motor in the display or using the top battery from what I have learned from comments of people with dual motors
@hamid5720
@hamid5720 Жыл бұрын
@@BRichSolution oh ok thank you, and wdym with using top battery?
@hamishmmc
@hamishmmc 2 жыл бұрын
Just got mine, unlocked speed, lift up back tire and it only hits 20 km/h??
@BRichSolution
@BRichSolution 2 жыл бұрын
Is it dual motor?
@hamishmmc
@hamishmmc 2 жыл бұрын
@@BRichSolution resolved that I was being dumb and had it in PAS 1. However now it intermittently cuts power and sometimes displays the error code for brakes (error 5). When I did get it working I got up to 48kmh
@hamishmmc
@hamishmmc 2 жыл бұрын
Update: had to adjust brake motor cut off - found a similar walkthrough on a iuiced bike. basically loosen two set screws and pull the wire out a tad and now the lever isn't so sensitive. My revised first impressions are I am blown away by the build quality and speed and torque. 47 kmh on flat ground with a passenger. I think I might look for a better rear shock as Rich advises, but the value with this bike is insane on my first impressions. I'd like to source some less flappy rear pegs, these are serviceable but ones with a stronger spring would be nice, but it seems sort of proprietary.
@Bs.zay.
@Bs.zay. 10 ай бұрын
How can u reset it
@BRichSolution
@BRichSolution 10 ай бұрын
See manual in description under video there is reset to factory settings
@cyrus3034
@cyrus3034 2 ай бұрын
Do you know the code of p2 ?
@BRichSolution
@BRichSolution 2 ай бұрын
Try passcode 1212 if that does not work then ask seller
@boraeser3396
@boraeser3396 2 жыл бұрын
Make a acceleration video to 0-30 pls
@BRichSolution
@BRichSolution 2 жыл бұрын
Will do, im on it
@BRichSolution
@BRichSolution 2 жыл бұрын
Speed & Acceleration test. watch all 3 runs. kzbin.info/www/bejne/raOUm5SOitmLd5I
@ginolipari3976
@ginolipari3976 Жыл бұрын
this is compatible with ouxi v8?
@BRichSolution
@BRichSolution Жыл бұрын
No this is yolin ebike
@zeusebikes
@zeusebikes 4 ай бұрын
My customer is stuck in tbe PE menue do u know to original password man
@BRichSolution
@BRichSolution 4 ай бұрын
Try 1111 or ask seller
@tommest9934
@tommest9934 Жыл бұрын
How you change the mph range level 1 thru 5 speed. level 1 10mph . Level 2 20mph level 3 26mph level 4 30 mph level 5 35mph.
@BRichSolution
@BRichSolution Жыл бұрын
The levels are dictated my the max speed set with the amps on setting p14
@tommest9934
@tommest9934 Жыл бұрын
where the amp setting , i dont see a p14
@mubamuba3394
@mubamuba3394 2 ай бұрын
What if a display not turning on?????
@BRichSolution
@BRichSolution 2 ай бұрын
Check connections, unplug and reconnect. Turn clockwise, the hold power button
@AngelGonzalez-l8m
@AngelGonzalez-l8m 2 ай бұрын
Como puedo salirme de PE aparese en mi pantalla
@BRichSolution
@BRichSolution 2 ай бұрын
Try holding + and - buttons down at the same time
@silbernersurfer8264
@silbernersurfer8264 2 жыл бұрын
I cant set max speed to 25Kmh. P6 shows 25Kmh. But the bike drives much faster. Any ideas?
@BRichSolution
@BRichSolution 2 жыл бұрын
Not sure… you cannot change it above 25 like shown at 4:28 in video?
@silbernersurfer8264
@silbernersurfer8264 2 жыл бұрын
@@BRichSolution Other way around!! My dual motor bike drives more than 50kmh. I have setted the p6 setting to 25kmh. But the 25kmh limit isnt working.
@silbernersurfer8264
@silbernersurfer8264 2 жыл бұрын
@@BRichSolution I have received this vid to unlock the controller from my Alibaba seller. Havent tried it, but will tell if it works. kzbin.info/www/bejne/kIHEpqWdeZ2ta5o
@silbernersurfer8264
@silbernersurfer8264 2 жыл бұрын
@@BRichSolution Now seller has confirmed it. My version of the controller has no speed limiter. That means I can not limit speed to 25Kmh via Display. Also some other P-settings arent adjustable in my case. For example P6 cant be adjusted. Seller will send me another controllers.
@ginstar
@ginstar 2 ай бұрын
@@silbernersurfer8264 hi just wondering. did the new controllers work?? i have the same issue
@imadsuper4307
@imadsuper4307 Жыл бұрын
Hi everyone, I can’t access the display and it tells me 0000 (password requested) I tried 1212 but it didn’t work. Is there a way to reset the display? I’d be very grateful for your help. Got stranded in the middle of a forest yesterday and paddle time with this 50kg behemoth it was😄
@BRichSolution
@BRichSolution Жыл бұрын
Try resetting setting to factory settings, see user manual link is in description of video. I think details are at bottom of manual. If that doesn’t work Reach out to victor on chat and ask his for password
@imadsuper4307
@imadsuper4307 Жыл бұрын
Thanks for the quick reply:) But that’s the thing - I am looking for a way to reset the display because I can’t access it past the code. Couldn’t find anything in the manual and Victor and his assistant Nicole say that it has to be replaced. I am surprised that you have the exact same supplier - how is your experience? I’m a bit disappointed because the quality is so poor. The lights stopped working, the chain, gear switch and from suspension are rusted. The back suspension was too short and hard(had to replace it), the brakes lost oil… It’s really fun to ride but now, that so many guarantee cases come up Nicole is suggesting them to be my fault. I’d like to know what you think about all of it. Thanks for your work!
@metaverz
@metaverz Жыл бұрын
Try 3288
@voicesoul5951
@voicesoul5951 Жыл бұрын
@@metaverz Hi Allan! Is that the infamous master password? It didn't work out for me unfortunately. Just to be sure I am doing it right: I type the code in and then press "i" for some moments, right? I colleague had contact to Yolin, asking for the master password but they don't want to share it. Reasons to-be-guessed! :)
@metaverz
@metaverz Жыл бұрын
@@voicesoul5951 i dont know about a master password. But there is a manual for an older model display where it says the password is 1212 or 3288. For me 3288 works. I wil send you a link( its for the older model) bus same way to get in. m.kzbin.info/www/bejne/mHWnfmV4i5WLgLc
@PassionatePlumbing
@PassionatePlumbing 9 ай бұрын
How do I remove the speed limit mines on like 40 km right now
@BRichSolution
@BRichSolution 9 ай бұрын
The make is 40km/h? U cannot change settings to go higher?
@PassionatePlumbing
@PassionatePlumbing 9 ай бұрын
@@BRichSolution at first before I clicked buttons on the computer it was showing 51 KM
@PassionatePlumbing
@PassionatePlumbing 8 ай бұрын
@@BRichSolution yeah it’s suppose to be 55 Km
@N33M00
@N33M00 8 ай бұрын
@@PassionatePlumbing You got the ekx x21 aswell? haha
@PassionatePlumbing
@PassionatePlumbing 8 ай бұрын
@@N33M00 yes sir!
@oknoztprk
@oknoztprk 2 жыл бұрын
Is there cruise control?
@BRichSolution
@BRichSolution 2 жыл бұрын
I believe there is but I haven’t figured out how to engage it
@aymanzarouali3075
@aymanzarouali3075 2 жыл бұрын
Figured it out?
@thetechgenie7374
@thetechgenie7374 Жыл бұрын
I need to figure this out as also can supposedly get where it tell you the wattage but claims optional
@Trillville43
@Trillville43 Жыл бұрын
Do not lower the cutoff voltage that is the worst thing you can do especially if you want to reduce the life of the battery. Do not go lower that 39v which is 3v a cell and is usually set to 42v or 43v which is better for the life of the battery.
@BRichSolution
@BRichSolution Жыл бұрын
I agree
@panoskonomi2875
@panoskonomi2875 Жыл бұрын
hey there, how can i reset the password on PE mode?
@BRichSolution
@BRichSolution Жыл бұрын
Not sure. See link to full user manual in description below video
@KylesYTU
@KylesYTU Жыл бұрын
Anyone know how to completely reset the system not just reset the display?
@BRichSolution
@BRichSolution Жыл бұрын
See section 7.1 for factory reset. Link to full user manual in description under video. Here is a quick link drive.google.com/file/d/1Rk7iSs0_lVSC2uSJVsuj94h9z_fuZ7xR/view?usp=sharing
@theebikeguy3852
@theebikeguy3852 Жыл бұрын
P six, even the what says kilometers per hour. That's not correct, it's actually the percentage you ignore. In this case, the kilometers per hour. The units are percentage, so 50% to a 100 %, whatever.
@BRichSolution
@BRichSolution Жыл бұрын
Okay good to know
@nickglenn4946
@nickglenn4946 Жыл бұрын
when i press + - it ask like some sort of pin
@BRichSolution
@BRichSolution Жыл бұрын
Not sure what the default PIN is? Try 1234 or 4321? Reach out the the seller to ask
@tenncutt
@tenncutt 6 ай бұрын
1212
I Bought the Cheapest, Fastest Electric Motorcycle(Not Amazon)
36:57
Bikes and Beards
Рет қаралды 1,8 МЛН
10 Tips To Make Your E-bike Go FASTER!!!
6:06
EbikeSchool.com
Рет қаралды 537 М.
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 269 #shorts
00:26
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18
Ouch.. 🤕⚽️
00:25
Celine Dept
Рет қаралды 29 МЛН
MY HEIGHT vs MrBEAST CREW 🙈📏
00:22
Celine Dept
Рет қаралды 93 МЛН
Yolin YL90T-H E-Bike Controller Settings (EKX X-21)
5:37
Usva78
Рет қаралды 2,5 М.
13 Coolest Bicycle Gadgets & Accessories on Amazon
8:30
Bike Zone
Рет қаралды 341 М.
Engwe M20 Display & Controller Settings - Yolin YL81C-B  kph to mph
4:30
THIS 46 MPH E-BIKE IS INSANE | EAHORA ROMEO 2
26:05
MC Cycles
Рет қаралды 9 М.
How to Buy eBike on Alibaba - save $100's or $1000's
3:58
B Rich Solution
Рет қаралды 54 М.
ADO A20 / A20F / A16 S866 LCD - Complete Settings Walkthrough (P01-P20)
10:23
NEW SABVOTON EBIKE CONTROLLER WITH TFT DISPLAY!!!
29:48
andy kirby
Рет қаралды 105 М.
11 Things I Wish I Had Know Before Buying an E Bike | Essential Electric Bicycle Info
14:04
sixthreezero EBikes & Bicycles
Рет қаралды 599 М.
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 269 #shorts
00:26