Engwe M20 Display & Controller Settings - Yolin YL81C-B kph to mph

[@FearMcknight]

Thank you you helped me finally set up my bike don't forget if you lock your bike in p8 by accident you put 1212 and it bypasses to set it up again

[@BRichSolution]

Thanks for the feedback

[@NajmulHasan-xu1jo]

tnx man i was fucking up with the password and didn’t remember that ..after starting reading the cmnt i got u😂❤️

[@chocochicochef]

I need help!

[@FearMcknight]

What's up

[@EuroVenture-up5zp]

Which button is bypass I don't know bypasses my cycle is stock because of P8 😢😢😢 seriously I am like crying 😭

[@martinburdge8820]

Thanks for running through the controls on the engwe m20 very helpful information.

[@BRichSolution]

Glad it was helpful!

[@Unknownislamg]

Legend for this video I couldn’t find this anywhere what the settings actually do like P6 but you explained perfect thanks 🙏

[@BRichSolution]

Glad it helped

[@DerekGRIMWOOD]

I managed to lock myself out on P8 , the release code is as advised 1212 however despite several frustrating attempts over some 30 minutes the code was not accepted. Then suddenly the unit decided it was right & allowed me to reset. Seems there is some kind of inherent fault.

[@BRichSolution]

Interesting and thanks for the feedback

[@peterjervis7028]

Hi there,very informative video,although I have a problem,my display is now stuck on P8 and the 4 digit display is flashing,I have tried to reset to factory settings as you described holding the power and plus button but no go.any advise please as my M20 won’t let me power up?Kind Regards Peter

[@BRichSolution]

Try password 1212 if that doesn’t work reach out to manufacturer or seller

[@peterjervis7028]

@@BRichSolution cheers Bro worked 1st time,much appreciated 👍

[@lillbuck325]

Thx man ! I was wondering if by reducing the Amps it would lower the speed of each electric assistance stage: Like i beleive taht with the first assistance, the bikes goes up to 20/25 km/h. And i would love to like put it at 10 km/h . Is it possible you think ? or is there an option dedicated to that ?

[@BRichSolution]

Yes lowering the amps & speed the range will go way up

[@arturbier]

Hi! And what happens if you set the voltage to 24? And what are the magnetic sensors responsible for? I would like to increase the sensitivity of the pedaling

[@BRichSolution]

Not sure… I did set volts once to 36v to extend my range on long rides but it cycles the battery below BMS

[@thertsr9999]

​@@BRichSolutionwtf I put mine on 36v 25amp and the controller exploded

[@ytpcgalaxy]

@@thertsr9999😂now you gotta get a new bike

[@kezmer]

Hello, the sensory speed make faster to reach 25km/h when u pedaling?

[@BRichSolution]

Yes

[@kezmer]

I must to make it lower or higher than 12? (My currently is 12)

[@Unknownislamg]

Hi just wondering what settings would you recommend changing for long rides I would like to ride it for a longer time rather than speed or is it best to just use lower assist

[@BRichSolution]

Change the max amps from 22A or 20A to 15A to prolong your range

[@Unknownislamg]

@@BRichSolution thank you so much for your reply

[@MilliJf-nf1ki]

Great video! Can you adjust the brightness of the screen? Can’t figure it out on mine. I mean like besides the dimming option, your screen seems brighter than mine.

[@BRichSolution]

I think mine looked brighter cuz it was in a dark garage. I can only dim the screen one setting; see video at 1:06

[@miles8169]

Hey man thanks for the video. Would you know if these settings be okay for my Engwe L20? Looks the same display controller

[@BRichSolution]

yes same setting apply to L20

[@miles8169]

@@BRichSolution Thanks so much 👍

[@christophercollins1959]

My bike initially had 8 pas modes after some messing around now I can only reach 1-3 any idea how to adjust back?

[@BRichSolution]

See user manual and worst case factory reset see section 3.2 myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf

[@christophercollins1959]

Yea I’ve already gone through this manual as well as an older one and still haven’t been successful have reset multiple times not sure what else to try or what parameters to change have gone through every p setting 1-8 none change the amount of pas modes

[@christophercollins1959]

I just got this a week or two ago and before understanding what I was doing I ended up just resetting to default which is what brought me to this state (bought this second hand fyi so not sure what the other guy did)

[@katarzynaprazewska1200]

Hello, I’ve bought mine Engwe m20 750W, but I’ve got one with the manufacture sticker saying it’s 250W. I’ve contacted Engwe and they are saying that my bike is actually 750W and “The 250w mark on this sticker is only for customs clearance”. Have you guys had the same problem? And of course I can’t unlock the speed 🤨

[@BRichSolution]

Can’t unlock it? Does the screen have a passcode? If so try 1212 or ask engwe for passcode

[@XtremeDSLR]

My new US version of the M20 only goes up to 40 for the highest speed adjustment in the display. Does the changing of the AMPs really do anything?

[@BRichSolution]

Were you able to confirm the speed with gps app? I have a ebike says I am doing 37 but confirmed with GPS app showed 32 mph

[@XtremeDSLR]

@@BRichSolution I edited it. It only goes up to 40 on the display for adjustment vs the 60 I keep seeing on the videos.

[@sector7676]

Hey thanks for the video but my question is you had the tire diameter at 23. Shouldn't it be 20 since they are 20x4 tires?

[@BRichSolution]

23” is the outside tire diameter of the 20x4 wheel

[@sector7676]

@@BRichSolution ohhhh. Ok thanks 😅

[@Esp32Experimental]

Is there any way I can limit the speed the throttle can output as in germany the throttle is only allowed to go up to 6kmh?

[@BRichSolution]

Not that i am aware of. I would disable the throttle or unplug it and use walk mode for 6km/h

[@Esp32Experimental]

@@BRichSolution thank you in p3 I put the speed to 25kmh but it still goes 30+ on Pas 5 I dont know what to do

[@ZpaztiK_TaktikZ]

For those who can't adjust speed in +- menu when you enter the "+-" menu hold power button and + together on P1 untill screen flashes with 60kmh. The you can increase amps to 25... Other than that there's nothing you can do. Bike will top out at 27/28mph .

[@BRichSolution]

Thanks for the info!

[@guillermoarias5560]

Mine was going 33 then I took it to the bike shop to a popped tire and when I git it back it won't go past 25 miles a hour

[@nipunmadushan-tj1mn]

Doesn't work

[@theotsilfoglou627]

Thanks for the help bro...

[@BRichSolution]

Happy to help

[@ss-sh6nb]

Great video, thank you

[@BRichSolution]

Glad it was helpful

[@mohammedsaleh7121]

Cool. If you could upgrade or do something for the display. The buttons so small when you want to change from 1 to 5 during driving

[@BRichSolution]

I agree PAS + and - too small. Sold the bike and bought a faster Ridstar Q20 with mote comfortable seat too

[@chiisuigintou]

Very helpful, if I wouldn't have tried this already.,. The thing is, pushing + and - simultaneously doesn't open this illusive settings changer.

[@BRichSolution]

sometimes if you push one button first and not simultaneously it will not enter advance menu

[@genasgenas]

Hi . Could you tell me please if its possible to choose 9 level instead of default 5? In other Engwe bikes with YL80C display you can have up to 9 levels and fine tune each level from 20% to 100%

[@BRichSolution]

Im not sure… I sold my Engwe as seat was uncomfortable and bike was too slow

[@ziauddin443]

Hello just want to know that i want to reduce the speed is that ok or i should Reduce the amps also

[@BRichSolution]

Ya reduce amps will lower speed and increase range

[@brunomedeiros8968]

I think I don't need to reduce the amps to get lower speed. Because my Engwie M20 has only one battery. I left to 13 amps. Is my was with two batteries I will leave. So I set in the P3 to 60 km and it works. I set to use all the magnetic heads and it works very well.

[@brunomedeiros8968]

Someone made a video that if we hold the + button for ten seconds displays will show 63 km.. But I didn't do it yet. Cause I don't know what can happens later.

[@EuroVenture-up5zp]

Sir my cycle stuck 😞 in P8 how to get back normal screen

[@viktorodjov2726]

Can you change the speed limitation on the EU version of the bike?

[@BRichSolution]

Yes, but with 250W motor doubt you can go more them 32 km/h

[@tonyelliott4541]

I have the same display but on a different ebike. My settings are set at P0 and 4 0’s underneath that. Is there any specific number combinations? The bike company isnt very responsive

[@BRichSolution]

I believe that is password to lock settings

[@tonyelliott4541]

@@BRichSolution okay cool so im assuming the bike company will be the ones to help me figure out the 4 digit code. Thank you

[@Sivlelvis]

I have the same controller, but when I go into the advance settings, it goes to P0 and I can’t advance it past that it has four numbers I can change at the bottom to start off at 000 but I can’t get into the advanced settings for the real size and changing the speed

[@BRichSolution]

Ask engwe for the passcode

[@ENORMOSAUREL]

Do you have any changes on the throttle ?

[@BRichSolution]

upgrade throttle - half twist is safer kzbin.info/www/bejne/ima9l4SQibVjarc

[@gilleslaurent4917]

Hi, How to disable completely the light ?

[@BRichSolution]

Disconnect the headlight cable

[@enemy1704]

I see a Bluetooth logo on my screen, what does that do ?

[@BRichSolution]

I am not sure maybe for future use or programing at the factory

[@ThatOnePoliceOfficer]

Why does mine says _ _ on p3 settings? How do i fix that

[@BRichSolution]

Ask engwe for the password

[@kherber1]

I can't adjust my speed higher than 25kmh, and I can't get the bike to work in throttle only mode. I've tried all suggestions in videos etc. hope you can help

[@acp2681]

I got mine yesterday and can’t adjust that either. The plus & minus buttons do nothing on that section. I’ve emailed ENGWE and they said to do factory reset which I’ll try when home.

[@BRichSolution]

Ask Engwe support they are helpful

[@kherber1]

cheers anyway I will keep trying. Engwe respone has been to just send me links to KZbin video. Engwe uk don't seem to be mega helpful so far

[@acp2681]

@@kherber1 I’ve emailed them and sent them the video of me trying to unlock the speed and they’re sending a new digital screen. When you go into the P3 settings, do the plus & minus buttons do nothing like mine? It’s strange as they work in the the other sections of the menu.

[@nevazhno1312]

@@acp2681I have same problem. If u fix it let me know pls

[@pongphanchareonsri7416]

I have a question can you turn down the light of the front totaal down ?

[@BRichSolution]

The headlight swivels on the bracket so you can adjust the beam down

[@pongphanchareonsri7416]

Thanks for replaying , But can you turn the lights totally down wil the bike is on

[@trevjordan5460]

Hi when my m20 is in p3 setting it will not show me a number underneath just two lines flashing

[@BRichSolution]

Not sure ask Engwe

[@trevjordan5460]

@@BRichSolution thank you

[@Jaxon_Comer]

Hello, im here in Naples, Fl and i was wondering how much you would be willing to sell your fully upgraded RSF650 street bike for. I am very intrested in buying one of these, i just dont have the time to order all the parts and build the bike itself.

[@BRichSolution]

I sold it 6 months ago someone offered me $1350 for it. I could build another one if needed

[@kinyo_evo]

M20 dual bat. When I go to the advanced settings, on P3 it doesn't let me increase the speed, it always stays at 25 km.. can you help me?

[@BRichSolution]

Ask engwe for password to unlock the bike

[@kinyo_evo]

@BRichSolution I can move and change all the menus, except the speed one

[@aqua.editzz]

@@kinyo_evosame did you fond a solution yet?

[@kinyo_evo]

Hey, yes, it's finally unlocked

[@taladno863]

@@kinyo_evo How?

[@ytpcgalaxy]

i have a different bike with this same display and it’s stuck on p1 how to i unlock it?

[@BRichSolution]

Ask seller for unlock code. Try 1212

[@ytpcgalaxy]

@@BRichSolutionhow to i punch in unlock code?

[@ytpcgalaxy]

@@BRichSolutionplease reply

[@timray4988]

How does your go to 25 and mine go to 20. I want the extra 5 on mine. Please help

[@BRichSolution]

make sure P03 is set to 60 kmh and P06 is set to 25 amps

[@dronepro53]

Is this display compatible to s830 display

[@BRichSolution]

Not sure

[@BRichSolution]

Not sure

[@SILVANO6938]

Hello, why in my unit only P0 with 0000 lightening ? thanks

[@BRichSolution]

Not sure.. can you change it 0000?

[@rats2864]

I accidently sent a password on the display and can't remember what I put it as. Is there a way to reset it or something?

[@BRichSolution]

Ask seller or manufacturer

[@jalindell]

Anyone know what the wheel setting should be? the diameter of the tire or just the wheel? Cause it is set to 26" from the factory, but the wheels are 20"

[@BRichSolution]

adjust wheel size to speedometer accuracy. Use GPS app on phone to confirm. I set mine to 22" which waqs accurate lower speed and high speed off by 2 mph

[@awaisiqbal1897]

Hi how I change into just power without assistance????

[@BRichSolution]

I don't see a setting for disabling the Pedal assist. You could dry to disconnecting the cadence sensor on the pedal crank at the controller to see if that works

[@blu3i]

How do I remove the lag when puling the throtal

[@BRichSolution]

Not sure… maybe one of the settings allows you yo adjust lag. Mine doesn’t have lag. Ask Engwe customer service

[@AdamX_pl]

See how to unlock the full power of this bike - Enegwe P1 - new models - kzbin.infonNEdpEEmtbk?si=qTPty4NpYOC9yn8C

[@BRichSolution]

Thanks

[@jorgeoliveirak5851]

How can i turn off the light? Do i need disconect the wires?

[@BRichSolution]

There is headlight button. Or you referring to small light bar jn head light for safety? If so you can turn off

[@nipunmadushan-tj1mn]

I have the same problem. I want to turn off the light. Can you help me?

[@compa8164]

Hello bro, you know how to remove the password, I was touching some things and by mistake I activated it and I don't know what it is. Thank you

[@compa8164]

When I turn on the bike directly, I'm in the password menu and I can't restart it from the factory

[@compa8164]

I already got it, don't worry 🤣🤣🤣🤣

[@BRichSolution]

As seller manufacturer for password

[@Polar-td6of]

🙏🙏🙏

[@BRichSolution]

Thanks

[@hgallegos915]

What's Max's mode?

[@BRichSolution]

Pas mode 5

[@matthewfarrell8413]

I think i changed the password setting and now its coming on but is stuck on p8 and when i hold power button and the + its not giving the option to factory reset,??help please

[@BRichSolution]

See user manual section 3.2 for factory reset myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf

[@EuroVenture-up5zp]

Sir I have the same problem now please help

[@EuroVenture-up5zp]

Please explain me how you come out from P8 I am still stuck 😞😢

[@Angel-jr4dv]

No alarm or key/passcode for this bike?

[@BRichSolution]

Not on this bike. I heard passcode is 1212

[@evgenydovbiy8574]

Как настроить другой датчик pas ? Хочу установить на 6 магнитов

[@BRichSolution]

Why 6 magnets?

[@evgenydovbiy8574]

@@BRichSolution у меня стоит датчик pas на 12 магнитов, нового купить,его нет. Есть возможность выбора 6 вместо 12? Можно настроить дисплей?

[@davidinmossy]

How do I get it off pedal assist ?

[@BRichSolution]

Ask Engwe. The manual does not allow for user to configure PAS mode. Maybe disconnect the cadence sensor on the crank from the controller? Full user manual myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf

[@davidinmossy]

@@BRichSolution Thanks yeah its the same manual you get with the bike.

[@davidinmossy]

@@BRichSolution I got it working thats it in full throttle mode 😍

[@KM_F19]

When i turn on there is p8 on password what can to do?

[@BRichSolution]

Try 1212 if that does not work then as Seller or Engwe

[@KM_F19]

@@BRichSolution ok thanks

[@ytpcgalaxy]

hello how do i reset this display?

[@BRichSolution]

See section 3.2 on manual fot reset display myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf

[@euro35maks]

Author, thanks for the video. How to remove speed limits? My ENGWE O14 bike travels at a top speed of just 26 km/h.

[@BRichSolution]

Try passcode 1111 if that does not work then contact Engwe

[@euro35maks]

@@BRichSolution You can find out more about exactly how to do this! and where to enter this password?

[@euro35maks]

@@BRichSolution Thank you. Can you be more specific about where and how exactly this code should be entered?

[@brendanmonkey3599]

Why is the battery sign on my display not there?

[@BRichSolution]

Not sure

[@billvarvarigos6459]

i face problem with the speed and distance indicator. i am cycling with 39 -45 km/h and shows 0. Engwe send me a new controller but ALL THE SAME. Could anyone help, pls???

[@BRichSolution]

Interesting. I wonder where it gets the speed from? Its not the cadence sensor on the crank as mine went bad. It must be a signal inside the rear hub motor? What did Engwe say?

[@billvarvarigos6459]

I don't know probably the sensors are inside the motor... and Engwe is sending me a new motor.... i am waiting 12 days so far... probably it will need 15 days more to wait, the same days as i was waiting the controller that they send me.@@BRichSolution

[@achiez11]

why does mine only go up to p7? I don't have p8

[@BRichSolution]

Not sure ask seller or manufacturer?

[@ugosalvadori7513]

Sorry man .. i Didnt know the p8 button .. and maybe clicking no paing attention IV changed the default s password.. how can i do ?? The bike Is blocked on P8 0000

[@BRichSolution]

My default was password was 1212. You can do a system reset see video to unlock

[@ugosalvadori7513]

@@BRichSolution thank you so much.. I solved .. Actuallt, in my ignorance, i set the time on the p8.. I rember that was 18:42.. So i out those pass and the e bike unloncked.. I was really scared.. Anyway ,still i cant do the reset.. Hope that i won t Need 🤣

[@meeeeu6770]

@@BRichSolutionhaw do I do a system.reset because I'm stuck at p8 ? Thanks!!!

[@EuroVenture-up5zp]

Please help me I have the same problem now 🙏😢

[@chocochicochef]

My engwe m20 won't let me increase the maximum speed. because?

[@BRichSolution]

Do you have 250W or 750w motor? If 750w ask engwe for password

[@chocochicochef]

750w but I can't delimit it. How could I do it?

[@chocochicochef]

@@BRichSolution kzbin.info/www/bejne/Y6LWdmSphbGKh68si=3yZj8YpYaeHm9QXZ

[@chocochicochef]

kzbin.info-qsE1sPLWQM?si=pHw5sIph-Lbnv9tm

[@chocochicochef]

I need help pleesee!

[@Andy-mp5jj]

Does anyone know how to fix error 30?

[@BRichSolution]

E30 is communication error according to manual see link below. Check the connector on the wire harness. Disconnect the connectors and reconnect to ensure they are seated. Did the bike get wet? myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf

[@ziauddin443]

Hello P3 is not working it's on 25 not increasing and not reducing

[@BRichSolution]

reach out to Engwe for solution. Do you have 250W motor or 750W motor?

[@Zmaj035]

Hi, On my M20 bike i can't change with the +/- the speed limit. Do you maybe know how to resolve this problem?

[@BRichSolution]

Not sure… contact engwe

[@stoney2846]

I have the same display but mine goes to p19

[@BRichSolution]

Interesting

[@ΜΙχάληςΚαλαμποκάς]

I lived in p3, it goes up to 25 km

[@BRichSolution]

Okay

[@ΜΙχάληςΚαλαμποκάς]

at p3 it stops 25 km

[@BRichSolution]

As manufacturer why?

[@ΜΙχάληςΚαλαμποκάς]

I dont now how to hack

[@Yo_Big_Homie]

I accidentally left my battery on for a week now my battery indicator doesn’t work

[@BRichSolution]

Charge full then try it again

[@RamiroJunTV]

I am still have problem because is still in P1

[@BRichSolution]

P1 is locked?

[@sweptapostle2473]

the manual didn't explain any of this and now I'm locked out of my bike...

[@BRichSolution]

try factory reset outlined at 4:04

[@JamiePaterson-q9p]

@@BRichSolution hi I have done the same with p8 setting and don’t know the password

[@TheSteve875]

​@@JamiePaterson-q9p paswword is 1212

[@TheSteve875]

1212

[@Jamescriddle-n1v]

​@@BRichSolution how do you turn the head loght of ? I have held the "light on button for 2 secs ) as instructed but I can't seam to turn them off now😂 I've tried holding the light on button for 2 secs , also tried the light button by the horn ... im stumpped🥴

[@ugosalvadori7513]

Please help me

[@BRichSolution]

What is the issue? Do factory reset by holding power and + button for 3 seconds

[@jamesgopro4233]

Hello, P6 must be 20. Because of a controller maximum is 20 Ah. At 25 maybe heat your controller.

[@BRichSolution]

Yes it won’t take more than 20a

[@Sentoki_FR]

est ce qu'il peut etre en dessous ?