Car still moves with handbrake on/How to adjust Parking pedal brakes Camry/Adjusting brake drum

[@dave9817]

Great video! My only concern would be spraying brake fluid everywhere you risk removing all of the required grease, typically 6-places on the back plate, upper pivot where shoes come together and so on...

[@bradleytribble419]

I had a shop do brakes on my car. The emergency brake worked fine until after they worked on it... Now I'm taking it to a different mechanic and getting this done. And making the other shop give me my money back! Thanks for the detailed video! 👍

[@AliMECH]

Sorry to hear that, hope my video will be helpful for you

[@wilsonemeka1833]

Alimech you seem not to be answering questions here. You only appreciate those who said excellent video. Try to respond to questions as well. Most of us learn from those questions and the answers you follow up with

[@mrmrjims3865]

same here, my parking brake worked fine until I replaced my brake/rotor/caliper at a big box shop, now they want another $1000 to fix the parking brake

[@Ahmed-lc7ow]

Wow very nice camera angles and explanation! This is the clearest video I've watched on how to adjust the parking brake for my Camry.

[@AliMECH]

Thanks Ahmed ,glad you like it

[@leonardomathew9417]

To too

[@ala_care]

@@AliMECH good explains 👍

[@AliMECH]

Thanks 🙏

[@Elite_Employee]

Mine is the exact opposite. I had a friend replace rear brake pads and the Parking brake shoe and if I’m on a slight hill and take my foot off the brake it won’t go up without pressing the gas. I feel like there some slight restriction and I’m having to press on the gas like 10-15% harder to maintain speed

[@garylangley4502]

Thanks for the great tip! When I started working on my family's cars, they were adjusted by tightening a cable, usually under about the middle of the car. Yes, I am so old that I remember when dirt was invented.

[@AliMECH]

Glad it helped!

[@fawiek]

The best video that shows and explains an ebrake adjustment on utube! Thank you!

[@jackieleung5365]

Thank you , i was easily able to adjust my parking brake by watching your video.

[@AliMECH]

Glad it was helpful, thanks for letting me know

[@mikart3d]

fully intuitive, now I can work on my own car by myself, no mechanics needed anymore for that part :) Thanks

[@AliMECH]

Thanks 🙏🏻🙏🏻

[@jimjones9491]

I've put up with my parking brake in the camry getting worse for 3yrs and now not holding the car at all. Today that all changes 😎

[@abe1992abe]

Great video. Awesome explanation and everything. I just have 1 question when adjusting how much resistance should the rotor have when you spin it. I understand you should still be able to spin by hand but how hard should it be when spinning? I’ve watch another video where that person explained to keep adjusting until you can no longer spin and than loosen it by a couple clicks and that way both sides would be equal. Do you think that’s a good way to tell how much to tighten it? Thanks!

[@fivemountains2224]

The instruction & photo are in good quality. This make video clip become helpful and practical. Thankyou

[@AliMECH]

Glad it was helpful!

[@paulkeating9950]

Incredibly good video including the quality. Very informative with crystal clear video. Excellent job!

[@AliMECH]

Thanks for watching 🙏🏻🙏🏻

[@ahmetturkmen0011]

Bro this was really good. Simple, straight to the point and easy to understand. Very clean job 😊👍🏼

[@abdulwahidyaseen2844]

I'm a new subsciber, your channel is awesome.

[@AliMECH]

Thanks and welcome

[@ahmaderin]

Thanks for the way how to do adjustment on parking brake. excellent video and easy to understand.thanks again bro.keep it up impressive work on next video.

[@AliMECH]

Thanks for watching and supporting ✌

[@lego4av]

great video . sometimes you only need to unplug the whole and use the screwdriver without removing the rotors or caliper .. thanks for the video ..

[@AliMECH]

I always like to remove the rotor to clean the brake dust and then adjust it

[@waqarqadeer5217]

Thank you Brother. I am having similar problem in my Camry. I will try fix it soon.

[@AliMECH]

That's great, thanks for watching

[@hugostiglitz1109]

Thanks for the tips. Just wondering how do you ensure both rear tyres has the same amount of ‘grab’ when you engage the handbrake? Is there an indicator or it’s just done by feel for each rear wheel? Thanks

[@AliMECH]

Count the teeth When you turn the adjusters, and after you done, engage the brake and drive the car forward if its front wheels drive, if both wheels locked, you r good to go, but always count the teeths

[@raphaelmahumane1648]

@@AliMECH Best answer, I wanted to know too. Thank you.

[@AliMECH]

No problem 🙏🙏

[@wilsonemeka1833]

That's means you would do this for both rear tyres??

[@henrybikeman]

Good job. What you call a 13mm bolt for pulling off the disc rotor is in fact an 8mm M8 bolt that has a 13mm AF head!

[@badmann696969]

You're very clear and precise on your explanations, great channel you have here man. Liked and subscribed 🤙

[@AliMECH]

Thanks appreciate that ✌✌

[@rustypotatos]

Great video. Now we can drift that Camry so hard

[@AliMECH]

Lol yea, my kinda guy 😅

[@oriondragos5876]

Thank you for the tip. Easy to follow, no BS. 👍

[@AliMECH]

Glad it helped

[@reuti4135]

The part where you used a flat screw driver ,is it for the hand brake or the pedal brake ?

[@AliMECH]

Yes paddle parking brake or hand brake adjusting

[@saroqhashim9766]

Clear description , Dast xosh

[@AliMECH]

Thanks bro, 🙏🏻🙏🏻

[@1975reispedro1]

You very calm explaining what you are doing and using well selected angles. Your rear wheel have both types of brakes? Disc and polie?

[@AliMECH]

Thanks, yes it has both

[@repsgsongs4562]

Do I really need that rubber plug back in or its okay if I didnt put it back in?

[@wrsteep]

Great video Man! A well documented process.

[@AliMECH]

Thanks for watching

[@scnw95]

Thanks for the great video! As an amateur car enthusiast, I've got two questions: 1. To open the brake shoes and get them closer to the rotor, is there a particular direction (clockwise or counter-clockwise) you need to turn the small gearwheel using the flat screwdriver? 2. Do you need to do this for both rear wheels? Or is one sufficient? Apologies in advance if my questions are too dumb. Appreciate a response. Thanks!!

[@miguelcarranza142]

Very good video, I will apply your advice, could you give me the name of the spray you use to clean the brakes, thanks.

[@AliMECH]

Thanks, its Brake cleaner

[@jackman2865]

Thanks, all good to do my rotors tomorrow

[@juliobello4561]

Nice took so long to find this video. One time I left my car on parking brake and put it on drive and it was moving and is what I need to do

[@agostinodibella9939]

I really liked this video. So pushing up on star wheel tightens parking brake shoes and pushing down loosens them. Correct? I would always get it mixed up.

[@leftoverpizza01]

Did I miss something or can you not just adjust the parking break by rotating with the screwdriver through that hole without removing the rotor? Why was there a need to take out the rotor in the first place?

[@Bianedden]

Fast and right to the point

[@AliMECH]

Thanks

[@MaksimLiutyy]

Good video, but next time also mention, please, first, to put your brake caliper back on you have to push piston back with a special tool (or wedge or whatever suitable for you) and also you have to monitor brake level liquid (where your small brake liquid tank is located) whilst pushing the piston. Second, adjustment of your hand brake should be done kind of simultanuously on both rear wheels and you should check and test it rather by hand and NOT by counting of how much gears you clicked. Also I agree with the comment about cleaning compelte drum brake unit with brake cleaner liquid or spray as that will remove lubrication from the pairs of friction (which are gliding/sliding pins of the brake pads), however I don't mind of spray liquid cleaning the drum itself. Third, I wouldn't recommend people to check and test hand brake tightness by simply engaging the brake and setting automatic gear, because it is ridiculous mate!! Use any natuaral or artificial ramp elevation/inclination rather than your automatic transmission. Other than that, man... This video is the true good video of how hand brake should be adjusted (NOT on the hand brake lever, but on the wheels). Good on you!

[@rashidalmany6096]

You the best ever thank you 🙏👍

[@AliMECH]

You're welcome

[@willliam9927]

What a great video!! my only question is , do i have to adjust only one wheel or both of them?

[@AliMECH]

Thanks, yes you need to do for both sides

[@shapethedatacompany4285]

Excellent tips and advice thanks

[@AliMECH]

You welcome 🙏🏻🙏🏻✌

[@donwolfjr1]

Do you do both sides of the rear or just the drivers side?! Excellent video!!!

[@AliMECH]

Thanks, yes of course, that's my latest video kzbin.info/www/bejne/sGaaiJumYp6XfMk but different car, if you wanna see more and understand the process better

[@donwolfjr1]

Cool, thanks!! The car I'm needing the ebrake adjustment in is my '17 Sonata Sport, and I'm thinkn it's very similar to the Camry you did here!!

[@owenst.edward3412]

Great installation video

[@AliMECH]

Thanks 👍

[@jiminma50]

Awesome video! Thanks for this.

[@AliMECH]

Thanks

[@kullu34]

Wonderful explaintion bro.. Thank fo give good knowledge

[@AliMECH]

Thanks and welcome

[@renaldobrown5570]

Good day I have an infinity i30 maxima but my hand brake is a foot pedal an it's really lose but I don't know if it carry brake shoes in the back I know it's four wheel disk do you have any info on this an how do I adjust it I recently bought the car used

[@maharajraynal790]

Thank you so much for the video buddy

[@AliMECH]

No problem, thanks for watching

[@zackvizeman5329]

Dear Ali - Great video As ususal ! I have a short question. I want to change my rear brake dust shield (2013 Lexus RX350). I believe I have to remove the bearing first. Do you know if I have to take the entire energy brake apart, or would I be able to just release the cable and reroute it through the new dust shield? Your reply is much appreciated!

[@DelphyM]

Yeah, pretty awesome tutorial for the amateurs like me. However, I'm strugling to buy the right 13 mm bolt to remove the rotor. I got one, but the thread may not be the same angle/pitch. Any more detailed spec for that bolt, please?

[@Rick-rj4bq]

This is probably late but the bolt is a M8 x 1.25 -1.25 is the pitch. 13 mm had to be the length he used. I use a M8 X 1.25 20mm length. I’m sure you got this by now but if not - hope this helps.

[@DelphyM]

@@Rick-rj4bq Thanks matey, that is very helpful. I didn't get it by now, so much appreciate that:) Take care.

[@magyaradam]

Is this the same for ford falcon BA?

[@Extremegaz25]

Excellent, cheers for information.

[@AliMECH]

Glad it was helpful!

[@Official-bg1dt]

Nice video Sir. From India

[@AliMECH]

Thanks

[@KaranSiyodia]

Thank you so much for this video. It was very helpful.

[@AliMECH]

Thanks

[@MrRay-xh5tv]

Best video ever

[@AliMECH]

Thanks

[@rennierattan3665]

Great video I'm going to get that done! What cleaner did you use?

[@AliMECH]

Thanks, I used carb cleaner, brake cleaner can be used too

[@rennierattan3665]

@@AliMECH what brand?

[@AliMECH]

Any brand, they all the same, I use abro

[@acmelbourne]

I have a 2016 Camry and it looks nothing like this particular car - I followed your advice and cleaned everything, then put it back together, but was unable to adjust the brakes.

[@anthonydejesus5046]

Excellent video nice and clear thank you for that preciate it buddy thumbs up

[@AliMECH]

Glad you liked it

[@philipwang4600]

Is it true turning the adjuster wheel upwards would expand the pads closer to the rotors for both the left and right sides? Therefore makes it tighter when pulling the hand brake handle.

[@MiataMan]

Great video and excellent explanation. 👍👍

[@AliMECH]

Thank you! 👍

[@tonymontana897]

Excellent video Sir. Khalile yek.

[@AliMECH]

Thanks Tony

[@singhdavinder4444]

Good! Helpful Video!

[@AliMECH]

Thanks for watching

[@MrRay-xh5tv]

What size bolt u use to remove the disc?thank you

[@AliMECH]

13mm

[@kusinaadventures]

Is it that adjustment will self adjust itself when you stop and break?

[@jorgeesparza829]

Bien explicado saludos de Monterrey

[@AliMECH]

Muchas gracias por todo

[@jbwjr54]

Good video.

[@AliMECH]

Thanks

[@21stcenturyexaminedlife45]

Thanks Ali

[@AliMECH]

Welcome

[@ajsalazar82]

is it supposed to spin freely on awd vehicle as well

[@Pandemos]

Is it normal to hear some friction after adjustments, even if it spins freely? If I adjust to where there is no friction sound, the ebrake doesn't hold the car when engaged.

[@AliMECH]

It's totally fine when u hear that, it means the brake shoes close but not too close I always adjust them to the point I hear that sound

[@Pandemos]

@@AliMECH cool, so it won't wear them down, since that's in the retracted setting and they're still making contact?

[@sadmanzarif6437]

I have a toyota Mark II 2004 gx110. When Handbrake is on and if i move the gear lever to R or D, the car moves. It shouldn't have moved if Handbrake was on. So is this video's fix similar for my problem ? PLEASE LET ME KNOW

[@AliMECH]

no, it shouldn't move, it should lock the read wheels, even if u put on D, it should drag rear locked wheels, but don't let it spin

[@sadmanzarif6437]

@@AliMECH if i follow these steps on this video, will it help me. i mean does my car have this problem which u mentioned in ur video

[@mgislao7]

Great video! But do you adjust with the parking brake applied or released?

[@AliMECH]

Thanks, you have to adjust it with parking brake released so you can turn the rotor by hand to feel the resistance

[@mgislao7]

@@AliMECH gotcha, thanks!

[@JG-ey5ml]

Thank you bro

[@AliMECH]

Welcome

[@GUnSNRoSeSrOcKzz]

Thank you!

[@AliMECH]

🙏

[@saadalshehri9075]

great video, subscribed. excuse my question if it is silly. but is this process done to all 4 tires or only the back ones, or what exactly? Thanks Ali

[@AliMECH]

No problem, only the back tire has parking brake, so only rear tires

[@djrednitro4116]

mine was not adjusted with the hole. I had Firestone replace the brakes, roots, and caliper and they didn't bother aligning the holes

[@ridvan61usa]

Is it only on one tire. Or does the right tire has this break too?

[@AliMECH]

No, both rear wheels has that

[@mattysarich5350]

Do you have too adjust both sides

[@AliMECH]

Yes

[@crawlspaceemora]

Lol just now I ask my mechanic regarding adjustment the foot brake. He said it can’t be adjusted!! I’m not a mechanic and I know it can 😅😅😅😅😅😅😂😂😂😂❤

[@AliMECH]

If u mean parking brake, I don't know he didn't know or he was having a bad day 😅

[@kevinkevin7105]

my car that problem and also when I turn the car right and left and y uturn I hear the sound inder car around the brake. And when I pust brake too show on. You know what is problem? I have 2015 camry se

[@gootywooty]

My handbrake makes noise when driving, I think it's touching but I can still roll tires fine. Is this issue with something else?

[@joystickadamchircop7278]

Good job

[@AliMECH]

Thanks

[@seamosserchin9024]

Nice!... love it.

[@AliMECH]

Thanks

[@jon2al356]

In my 17 Camry, when I'm in reverse and hit the brake, there's a clicking sound. But there's no clicking when I'm in Drive. Any thoughts?

[@rogeryanez8107]

Good video my friend, Will using a brake gauge be more easier when adjusting?

[@AliMECH]

Thanks, no need to, just count the turning to be same for both sides

[@rogeryanez8107]

@@AliMECH Thanks brother 👍

[@hawberadilm]

Dast xosh bet

[@AliMECH]

Supas bram

[@saroqhashim9766]

@@AliMECH hhhhhh ba Kurdi ?

[@AliMECH]

😀🙏🏻🙏🏻

[@colinjones7916]

thank you

[@AliMECH]

You welcome

[@CM-ch5vc]

good video

[@AliMECH]

Thanks

[@sultan26706]

What this calipers blue ?

[@AliMECH]

I painted them long time ago here kzbin.info/www/bejne/h6vMooOpeLukh5o

[@Justacogg]

Don’t forget the torque wrench on the Lugnuts.

[@AliMECH]

🙏🏻🙏🏻

[@toyotacamry4657]

Did you figure out why its not automatically adjusting your foot brakes? You manually tightened it... so it will happen time after time again.

[@AliMECH]

Yes its adjusting but not that much, the car was still moving, so yes maybe after few years it will need adjustment

[@yacobs6245]

Best

[@AliMECH]

Thanks

[@davegoetz2825]

I love ti

[@sanafaiq1653]

🙏🏻🙏🏻👍

[@AliMECH]

🙏

[@kimchee94112]

Torque down the lug nuts to specification.

[@ACommenterOnYouTube]

Impact wrench on lug nuts ?? Thats a HUGE NO.

[@kaissattieh]

Nice socks

[@AliMECH]

Lol thanks ✌

[@therandomstuffchannel1051]

Yo why u got paddle shifters on your steering wheel 😆

[@AliMECH]

i designed and 3d printed them, my car got more power now lol

[@ACommenterOnYouTube]

Its called SPORT SHIFT ....

[@jdmfans6078]

brother same process to a 2010 toyota prius?

[@AliMECH]

Yes, you can watch my latest video, I explain which wheel should be bleeded first kzbin.info/www/bejne/fZuvm2lrgN6mpqc

[@EsalaTanuku]

Great video. Thank you.

[@AliMECH]

You are welcome!

[@drs540]

Good video

[@AliMECH]

Thanks

[@josephquizo5476]

Thank you

[@AliMECH]

Anytime