Car still moves with handbrake on/How to adjust Parking pedal brakes Chevrolet /Adjusting brake drum

[@alienlatino2945]

Wow the best, most simple and most efficient video on how to do this job on KZbin, without the unnecessary talk.

[@AliMECH]

Thanks, glad it was helpful

[@jasonmanukau6978]

Good job on this demonstration, Americans need to watch and learn how the present tutorials.

[@GuidelinesViolator]

With a broken microphone and 20 fps?

[@evanricard6468]

Nice job, the 3d printer rotor helped a lot. Good effort man! Quick and to the point l

[@AliMECH]

Thanks Evan, I had to do something different to show it works

[@AChi__]

@@AliMECH That blew my humble mind 🤣. Thanks man 👍🏻👍🏻. Oh, and you earned yourself my damn sub for that 🤣

[@bereketmol4227]

Clear and quick explanation with simple language, straight to the point. Like this video. 👍

[@AliMECH]

Thanks for watching

[@olenaerhardt7725]

@3:05 Thank you so much for the explanations on adjustment of the Emergency Break. We have such a problem on one of our cars, not so dramatic as in this film, but still the car is moving a bit after the Emergency Break is applied. I thought you need to do something with the Em Break Cable to adjust it, and not just via the Adjuster on the Drum Breaks. I know how to do it and did it a couple times, so I can adjust the problem on our Chevy. Thank you again.

[@AliMECH]

Adjusting from cable will cause damage in long term, because it will always be under tension, adjusting must be from brake shoes to have minimum gap

[@LakshmananLM]

Short and to the point! Thank you.

[@AliMECH]

Thanks for watching ✌️

[@lazarusiyambo8877]

Thank very much it short but clear and direct to the point watching from Namibia 🇳🇦 thank very very much once again

[@AliMECH]

You are very welcome

[@rowbless393]

Saved me hundreds of dollars lmao. Thanka for making the video quick and easy

[@AliMECH]

Thanks, glad it was helpful and save u money

[@mertus4395]

Nice video man! You take a lot of effort just to do the camera angles, and explaining is clear. I'll suscribe

[@thauansouzadeazeredo1494]

Awesome! Im from Portugal and i have this car. You help me a lot with your videos! A big thanks to you, mate!

[@AliMECH]

Thanks for watching, glad it was helpful

[@donwolfjr1]

Another excellent video!! Thank you, Ali!!!

[@AliMECH]

Thanks for watching and supporting 🙏

[@sherwannasradin]

Slaw la to kure bash dast xosh esheke jwana

[@AliMECH]

Zor supas bram

[@lukeneave]

Wouldn’t it be wear out the shoes if there slightly touching while drive or make fuel economy worse? Great video easy to understand

[@AliMECH]

No, the important part is,when you adjust it, you will still be able to rotate it by hand, anything more than that, will wear out and put resistance on the engine

[@MarcoS-fb3qr]

@@AliMECH how do you unadjust it if you adjust it too much?

[@luffyking3513]

​@@MarcoS-fb3qr Ctrl + Z

[@talion9289]

If you don't want to clean it could u leave the calliper on and adjust it?

[@vladisimi]

Nice video. Short. On point. Like it 👌

[@AliMECH]

Glad you liked it!

[@karwanali3155]

Bro gou are simply amazing

[@AliMECH]

Thanks brother, appreciate your support 🙏

[@93Abydos]

Just what i looked for. Thanks!

[@AliMECH]

Thanks for watching

[@AlexS.2016]

Awesome, Thank you, Just perfect!!!

[@AliMECH]

Glad you like it!

[@hellohello8556]

Good video mate. 👍

[@AliMECH]

Thanks

[@aungwin1013]

I can ever adjust the rear bake on my Camry to be able lock when I pull hang brake. You know why ?

[@sebastianhanzlik4644]

Thank you for this video!

[@AliMECH]

Glad it was helpful!

[@Unabridged-j3h]

Thank you Ali.

[@AliMECH]

My pleasure

[@reynaldosaratobias5808]

GOOD JOB SIR I'M ALSO NEW MECHANIC THANKS FOR THE VIDEO GOD BLESS 😊

[@AliMECH]

Glad it helped

[@r.lawless8316]

Well done. 😎

[@AliMECH]

Thanks

[@soumix9936]

I have the same problem in my car thank you so much

[@AliMECH]

You are welcome

[@WickedTimeFox]

Hey AliMECH, this is the same system as on my sienna. I used the adjuster to loose the parking brake, but the pads are partially stuck still. Any tips?

[@abdullahalaaaliraqi171]

Clean it

[@papatalkmall21]

woaaa nice demo...

[@AliMECH]

Thanks

[@MotionArtist3D]

Excellent Video! Thank You! Subscribed! 🙏

[@AliMECH]

Thanks

[@brendanpells912]

Handbrake is similar on my old Hyundai, the lever pulled by the brake cable can seize up due to corrosion and stops the brake shoes pulling away from drum. Because they're only designed to hold the car, not for stopping, they're pretty skinny so they can wear down pretty quick. It can also wear a groove in the drum which makes them hard to pull off unless you take that plug out and back the adjuster right off. As long as the handbrake is only applied after the car is stopped, the brake shoes linings shouldn't wear much and the adjuster shouldn't need much adjustment once it's set.

[@c.518]

Hi. Do you know if a ford 500 has brakeshoes and adjuster?

[@a01A01]

yaaaaah yeah 🔥❤️

[@bennyb6071]

thanks pal

[@BryanG830]

my car has disc brakes in the front and drums brakes in the rear. is it the same way to adjust the emergency brake? my car still moves when the e-brake is engaged.

[@Lonewolf_rider]

Yes it's the same! The video showed a brakedisc with a drumdisc build into it. The drumbrake bit is the same.

[@jklife8755]

Hi thanks for your video ! How many click should I make for the adjustment ?

[@AliMECH]

It depends how much the shoes wear out, adjust and turn till you feel its touching the brake shoes

[@ioanghiuro-hw5ve]

Brilliant!

[@danemoisan6189]

Thank You!!!

[@AliMECH]

You're welcome!

[@davidynamix496]

good explaination, but what if i dont have that hole for the screwdriver? how can i adjust it then?

[@AliMECH]

Thanks, then it will be at the backside

[@WV591]

I get no ratcheting sound on hand handbrake, any idea?

[@sikhumbuzomtatambi1259]

How to change or more a jammed cable, cable from handbrake lever to the wheels?

[@bobbobb7244]

Smart video

[@AliMECH]

Thanks for watching

[@onpsxmember]

If you have that additional screw holding the disc, you can use a fitting bolt like in my case an M8 to push the disc off. It's from the repair manual of my car.

[@narpalalatha9278]

Guruji your great

[@AliMECH]

Thanks

[@andremorgado8103]

Hello i have a question my are new I changed them last month (June) and now (July) I hear a noise while i brake what is the problem here?? and my car still move when I push the handbrake

[@avitalvital3209]

Hello sir,helfull video,thanks,can you please tell me how to convert drum brake to disc brake for hyundai getz

[@fforfahim]

Works the same on civic 2005?

[@nv6399]

thank you.

[@AliMECH]

🙏🙏

[@iqbaljoulay5307]

HI MY HAND BRAKE on my uno has NO ADJUST by the brake SHOE

[@spinerocker]

Now I know. thank you

[@AliMECH]

No problem, thanks for watching

[@bensonjohn5400]

Good

[@AliMECH]

🙏🤙

[@reccocon3442]

Like the newer version of same title. But like both really.

[@user-kt5cr9ri2x]

hello! I did all the steps exactly as I should! but when the car is facing down the slope, when I apply the handbrake, the car goes downhill! but when the car is facing downhill and I apply the handbrake, the car does not moves! What could be the problem?

[@AliMECH]

You need to adjust more, if the brake shoes are not wearout

[@ahmedhekmat8836]

I have side work only after i renew the wheel nails

[@gr8pdo816]

What do you do with a parking break that the handel doesn't move it is a Ford Escape 2005 XLT 6 cylinders 4x4

[@Bull1the1Great]

Also, shouldn't that adjuster auto adjust as the brake shoes get worn out . Maybe it's rather a sign to change brake shoes than tighten the adjuster

[@Bull1the1Great]

I guess you need to count and do exact adjustment on both sides

[@AliMECH]

Yes exactly, good point

[@trumpssleepparalysisdemon8569]

Still didn't fix the issue. My cars' brakes get loose again and I have to keep doing this (re adjusting) every two weeks. It's getting annoying. I drive a 2007 Toyota Yaris Sedan 170k miles.

[@shanmugasundaram1983]

How to clean optra car rediator

[@AliMECH]

Here is the video kzbin.info/www/bejne/oH-2n4GOZbOHfJI

[@alanw5812]

should check the handle before put everything back ! not just adjust to touch, should adjust to lock and release one or two,because shoes may not center ! I check how old or lady drive, they may can't pull up hand brake handle if less then three.

[@edwardanthony7283]

Rear disc, not drum, like all 3 of my cars have!

[@Ucannod]

Same with kia soul

[@AliMECH]

That's awesome then

[@Cardboardthunderbolt1000]

Is that an drum brake?

[@AliMECH]

It's drum for parking brake and disk brake for paddle brake

[@Animals-s2t]

Жентраю бу узбекмисиз ака

[@AliMECH]

No

[@Braveheart7914-idfl]

👍🏻🇬🇧👏👏👏

[@AliMECH]

🇬🇧✌️🙏🙏

[@Eve....747]

....👍

[@AliMECH]

🙏

[@kevin8566]

no true mechanic uses a duga duga gun to undo the wheels and tighten them and the fact he put the wheel back on and removed the jack stands before testing the hand brake..tut tut

[@TM-fx5le]

wtf are you on about 🤣🤣 Clearly never seen a rear mechanic do his work then..

[@kevstamc3676]

​@TM-fx5le bro..he used a juda gun which is a massive no no to someone who actually cares about his car..you have any idea how many snapped and threaded nut heads I've seen and even had due ti these guns? That's " wtf I'm in about"😂😂

[@TM-fx5le]

@@kevstamc3676 That’s HILARIOUS, people that don’t care about their cars use impact guns on them? If you’re snapping so many wheel studs and nuts then you need to put the tools down and find another industry mate.

[@Joshuadelanguillette-dq1hh]

@@kevstamc3676I use an impact on my cars all day, no issues. I think it’s user error lol. Maybe don’t use a 3/4in drive impact for sedan wheels, lol.

[@madcat4563]

I'd like to see a tyre fitment centre change wheels without using a air or electric gun.

[@reinhardwolters7180]

Many car mechanics do this, but it is still extremely wrong and dangerous. Never, ever, ever put grease on the mating surfaces between the disc and the axle. This is a frictional connection. With grease, the screw force is no longer sufficient to transfer the forces (like iron wheels on ice). Once movement has occurred the bolt force decreases and as it progresses the bolts shear off. The centering ring and the contact surfaces should better be thoroughly de-rusted and sanded. Grease can be applied very thinly to the centering ring. And why aren't the functional parts of the disc brake cleaned at the same time?

[@lukasl6895]

Thanks mate now I can crash my bmw by trying to drift😊

[@SwolKirby]

Did you end up crashing it?

[@lukasl6895]

Yup😂

[@aleksanderthomas9769]

hahah drives with parkbreak on

[@AliMECH]

It was for test 😅