Introducing FlyWing FW450 V3 GPS Helicopter Upgrades Main Rotor Quick Release System

Introducing the FlyWing Main Rotor Quick Release System for FW450 V3 GPS Helicopter! This innovative upgrade not only ensures easy installation, but also makes storing and transporting your helicopter a breeze. With its quick and hassle-free assembly and disassembly on the field, you can spend less time preparing and more time flying. Whether you're into scale or 3D aerobatics flights, this system delivers exceptional performance and reliability.
New Rotor Upgrade for UH1 and Bell 206: bit.ly/UH1upgrotor
Get the new GPS here: bit.ly/3SpmfPB
FW450 V3 Helicopter Quick Release Main Rotor: bit.ly/fwmrqr
EdgeTx Heli Models: bit.ly/edgetx16shelis
Best RC Helicopters
Airwolf: bit.ly/fwairwolfv3
FW450 V3: bit.ly/3YT8qeF
Huey UH1: bit.ly/3ugxzT2
Bell 206: bit.ly/3HCnVl4
FW200: bit.ly/3OYCFgi
SeaHawk: bit.ly/yxbhrsc
BlackHawk: bit.ly/yxblackhawk
RC MD500 helicopter: bit.ly/48l8jhs
Best Radio Controllers:
RadioMaster TX16s: bit.ly/3FBQMnt
Pocket EdgeTx: bit.ly/rmpocketx
Boxer EdgeTx: bit.ly/rmboxertx
Visit Our Site: createc.store
Buy Me a Coffee: bit.ly/alicoffee
Join Channel: bit.ly/joinalishanmaoyt
My 3D models: bit.ly/2H3pxDH
Helicopters Spare Parts:
Huey UH-1: bit.ly/3SpmfPB
FW450L: bit.ly/3m4GOVm
F09S Seahawk: bit.ly/3lYgAUD
Bell 206: bit.ly/3INPDw0
FW200: bit.ly/3xPcAZn
#flywing #helicopter #gps #fw450v3 #fw450 #rc
00:00 Intro Trailer
01:47 Introduction
03:00 The Upgrade Part
03:45 Closer look at Parts
05:00 Unboxing New FW450 V3
06:21 how to install blades
06:56 How tight blades should be?
07:38 How to add remove quick release Blades
08:19 How to disassemble quickly
08:40 How to Pack FW450 V3
09:18 My Best Assist V1.9 Settings
09:31 Pre Flight Check
10:00 Flight Testing
11:07 Auto 3D Test
13:19 Manual 3D Test
16:37 RTH Test
17:59 Post Flight Check
18:25 34 Seconds Quick Packing
19:10 Conclusion

[@alishanmao]

Order Main Rotor Quick Release Here: bit.ly/fwmrqr 😀👍

[@stevetillson3268]

Fantastic, Ali. Again, thanks for a terrific video and for assisting in the idea and design of the quick release blade holder; quite an innovation! Forgive me if the following items have been mentioned before: 1) I own 3 FW450's (v.1, v.2.5 and v.3), and wanted to comment on the new tailrotor blade design: My v.3 tail is so much quieter than the first two versions. Those attractive little blade tips really make a difference. Congratulations, FlyWing for yet another improvement. 2) I can't congratulate FlyWing enough for not only producing an extraordinarily product but offering this complete package at such a reasonable price! For those thinking about either a first heli or adding to their hanger, simply shop around and discover for yourself what a bargain this is. Add it all up; i.e. : you get a complete assembled heli (servos, motor, ESC, battery, flybarless controller, GPS, receiver and transmitter already pre-programmed to your specific model all perfectly packed up in an attractive and rugged carrying case!) Extraordinary! And thanks again, Ali, for taking all your time and effort to bring this incredible product to life via your informative and entertaining videos. Steve

[@davidrivero7943]

From today on it shall be called , Ali's main & tail quick release. You suggested it & it happened.

[@goldenmanuever1176]

I’ll take it one step further. They should give him some type of compensation, bonus or cut of every sale made, etc. But knowing the Chinese, they won’t give him Jack.

[@alishanmao]

That what I totally agree with you. they just say thank you. in USA it should have been my patent and they pay pennies for using my patent on every helicopter. but hey welcome to China. in fact i gave them a draft design as well for this. but again, i would be more than happy if flywing even says once or twice that this was AliShanMao's idea and design and we thank him for making our helis better. waiting for it if this happens

[@alishanmao]

Yes buddy, but as Golden Manuever says, that should have been better

[@curiaalfonsocuriaalfonso6406]

@@alishanmao Buona sera vivo in Italia volevo comprare il modello FW 450 GPS. Perché in Italia non li trovo. La ringrazio.

[@alishanmao]

@@curiaalfonsocuriaalfonso6406 just order through the links in video description buddy :) have fun

[@paul0367]

Thank you for your time reviewing this Heli, I’ve seen many but this is bare bones and what we want to see in any review. No supprise that flying gave you another to review with the quick release system, again thank you .

[@alishanmao]

you are welcome buddy

[@NiCadHeliPilot]

So, the quick release system is a bayonet style? Awesome. Probably the only thing I can think of with that is (I am definitely moving the goal post, here. So, bear with me) the quick release mechanism being a wear point (especially when the helicopter is being flown through aerobatic manoeuvres). With thar being said, most people probably crash more frequently than the amount of time it would take for the quick release mechanism to show any signs of wear anyway. Either way, this is amazing, & seeing how far FlyWing has come is also incredible. Excellent work here, Ali. Also, I want to clarify what you said in your conclusion, regarding the blades & why they need to be loose in their blade holders, but not too loose: 1.) Blades too loose will cause them to strike the tail boom & other parts of the helicopter. This part you're correct. 2.) The Main Rotor Blades need to be loose enough in their blade holders in order to swing enough to align with disymmetry of lift. The advancing blade (IE the blade moving from the tail to the nose) must be able to lag behind the main rotor mast. The retreating blade (IE the blade moving from the nose to the tail) must be able to lead in front of the main rotor mast; 3.) If the Main Rotor Blades are unable to lead/lag like this, the helicopter will be incredibly unstable to the point where it won't be able to be controlled. The helicopter will have a tendency to roll or pitch in whichever direction the disymmetry of lift is taking it. This is relative to whichever direction that the helicopter is travelling in. Also, the lead/lag thing is how disymmetry of lift is addressed in a rigid/semi-rigid main rotor system - which is common to the vast majority of remotely piloted helicopters.

[@alishanmao]

Thank you for your comment buddy and yes very much appreciate the details on why blades should not be too tight. Hope this helps all RC Heli pilots out there :)

[@NiCadHeliPilot]

@@alishanmao Absolutely; & you're welcome. =^/,..,^=

[@alwaysflying6540]

That's a game changer for helicopters right there. I'm hoping they take it one step further for high powered 3d helicopter. The scale guys with multiple rotor heads will love that

[@alishanmao]

Very well said buddy :) totally agree with ya.

[@ronaldcobbs5260]

This upgrade looks great. Wish they had this installed when I got my V3. Well looks like I will have to order the upgrade kit

[@alishanmao]

well just buy it now. link in description :)

[@bowttech69]

I always love your reviews great product good flying I just ordered the V4 version today! Thanks for your help

[@alishanmao]

congrats and enjoy. please join subscribe to www.youtube.com/@parababahobbygarage my new channel because all new videos will appear there

[@appgamer3106]

Another great very informative video. Excellent job and very impressive flying!

[@alishanmao]

Thank you so much 👍

[@eugeneaustin]

nice one Alishanmao still waiting for my FW450 V3 from Chine ordered 15th january, never known it takes so long for delivery nice couplings works well great review mate.

[@alishanmao]

Hope you enjoy it! thank you :) for following my work

[@SayemsWorld]

Assalamu Alaikum. Dear Ali Brother, it's really a nice video and I enjoyed. Seeing from Canada ❤

[@alishanmao]

wassalam, Thank you so much. are you traveling or moved to Canada?

[@nostalgia3750]

It seems your comments about Chinese customer service have done some good as I have had 3 E-Mails from Pengpilot (at FlyWing) in the past couple of days - one of them saying that my FW450 V3 has been shipped - which is good news. Unfortunately he also says that Software V 1.9 for the helicopter is only available for Windows users, so us Mac owners still have to borrow friends' computers - which is very frustrating! Thanks for all your videos, Ali - excellent and informative!

[@MangGai168]

Great video 👍👍 Thanks for sharing 🙏🙏

[@alishanmao]

always welcome buddy. if you like join my supporters group here: www.buymeacoffee.com/alishanmao

[@lynsmith1096]

Very good review Ali.

[@alishanmao]

Thank you So much. Appreciate it buddy. 👍🌹

[@goldenmanuever1176]

Ali I see tic marks I’m in and I’ll support your link. Thanks !!!!

[@alishanmao]

always welcome my friend :) appreciate the support :)

[@chandrat7236]

Awesome Ali 👍🙂

[@alishanmao]

Thanks buddy 👍😀

[@izzaniielachannel]

Thanks for sharing sir

[@alishanmao]

Thanks buddy 👍😀

[@Maltojo]

Great Video as always and cool info! I have a quick release on order now! Thanks!!! Just a note: My first flight I was flying the circle, went to flip it back to normal, but hit the kill switch instead. Ouch. Broke a server horn and landing skid. Waiting for those parts. I think I'll reverse the run switch because I'm used to having that one forward to disable on my Radiomaster.

[@davidschrieber9308]

Flywing gives you this heli to review. But it’s not available….backordered. I feel if you’re gonna review one than make it available.

[@alishanmao]

this helicopter is really very popular now and stock selling out very quick but flywing is making more of course regularly and next batch is coming soon. you can order it using this link: bit.ly/3YT8qeF

[@alishanmao]

Ouch, yes I have done that as well LOL. glad i was in normal flight and i did an auto landing quick. yes make the switch where you do not accidentally touch it

[@marksampson7652]

Loved the video! Was very impressed by the flying and features. If I already have a RadioMaster TX16S, should I even bother with buying the bundle that comes with their own TX?

[@alishanmao]

no need, tx16s is best for this heli. i have video tutorial on setup as well

[@JrLongo]

Passando aqui para prestigiar o canal, e deixando aquele super like valeu..

[@alishanmao]

Thanks buddy 👍😀

[@goldenmanuever1176]

Hey Ali, I don’t want to experiment and then crash…for agility what is better for precise or slow? With the Chinese translation I am thinking precise is very quick and crisp and slow is just that less responsive.

[@alishanmao]

actually, when I put my settings to precise, I find helicopter is much more responsive and easy to control :) if i put it to slow, it gets sluggish and doing manual 3d is even not so comfortable with that settings. you may wanna give it a try

[@leonbroekharst4724]

Super helikopter. ❤❤❤

[@alishanmao]

thank you

[@glorbeard]

Just wondering if you are still going to produce a video showing how to convert the standard rotor head version to the quick disconnect (QD) version. I can't find any info on this (or a FW450-V3 parts list) and I have just received my FW450-V3 QD rotor head. Especially interested in finding a source for decent ball-link pliers and learning to use them properly without damage to the parts. Love your videos! Thanks!

[@alishanmao]

sure once i get back to China

[@willp3137]

Hey Ali... can't thank you enough for your videos. They have been excellent. I meant to ask... does the timer function work on the transmitter? At lease mines is not working, not sure if that is how it should be, as I can find were to adjust in the transmitter menu. Thanks in advance!

[@alishanmao]

It should. Unlock and click on timer. Set timer and it's options. It should work

[@willp3137]

@@alishanmao Lmao... couldn't find anything going through different menus, never occurred to actually press the timer text at home screen. Thanks a mill!!

[@SamcroHD]

Hi. Great review. Quick release system seems to be a little bit longer in diameter than original (about 1 or 2 cm longer) but your flights seem identicals. Do you feel a difference in the handling of the controls or not? Following your review, I don't think that quick release could be more dangerous than standard fix. For me it is a great option to have, better to screw/unscrew the props at every time. Once good screwing is made on quick relese system, it should not be worried about (but as all RC models, check everything before take off of course).

[@alishanmao]

I feel no difference in flight or controls. only thing is that this system puts a little more load on motor and esc so they are running slightly more hot (just nominal) than before. however still perfectly in normal temp ranges given the outdoor temps. more load of course because the diameter has increased. maybe Flywing needs to consider designing new shorter blades with wider body to compensate.

[@kunad2294]

Very good idea quick and easy to use, anyway my question is will the fly wing fw450 v2.5 Head and swash plate work on fly wing fw450v3, I would like to convert my 450v2 from the belt drive to the fw450 v3 set-up thanks.

[@alishanmao]

You may check both rotor head and swashplate parts. if they are the same they should work. if not, do not try it

[@kunad2294]

@@alishanmao thanks again, if not will just purchased new swash plate.

[@nostalgia3750]

My v.3 arrived this morning but it does not have the quick release blade mechanism so I have ordered this from your link - I'm grateful for that! A question - would there be an advantage to use the 52WH battery which came with the v.2.5, which is smaller and lighter than the 5000 mAh that is in the v.3? I've tested the C.of G. using the 52WH and it balances perfectly.

[@alishanmao]

I fly my V3 with small battery. I find flight time to be satisfactory and helicopter flies lightweight and easy. i use 5000mAh only when I put my V3 in Airwolf.

[@nostalgia3750]

@@alishanmao Thank you, Ali - that is exactly wanted I wanted to know!

[@willp3137]

Hi Ali... which battery do fly on the FWv3? or do you only use stock? Been looking at trying another brand, but size comparison on a 5k miliamp seems way off/larger than would fit.

[@alishanmao]

stock battery.

[@ratcat7668]

Is this Heli 880 or 700 mm long? I'm getting conflicting info. Thanks for the video BTW. And that snow is amazing. Where I live in central Victoria (Oz) we dont get snow at all, maybe the occasional hail. but it dows snow in the mountains of Victoria

[@alishanmao]

700mm buddy :) well where we are moving to now, there is nothing but heat and heat and heat. no snow

[@Freddy-tv2ki]

hello, first of all thank you for your superb videos. I just ordered the FW450 V3 from Banggood, will it already be equipped with this rapid blade system? Or do you have to order the system in addition? THANKS

[@alishanmao]

I am not sure. this maybe need to order separate

[@Freddy-tv2ki]

@@alishanmao hello, I received my orange fw450 V3, it is very beautiful! I activated 3D security as you explained. I ask myself other questions before using it: is this helicopter equipped with an audible buzzer for low battery or signal loss? in fact I had the Fw200 before and I had lost it following a loss of GPS it had gone offshore... it was thanks to the integrated buzzer that I managed to recover it from the noise. THANKS

[@sotheamam1244]

Hi. That is cool

[@alishanmao]

Thanks

[@butchlacour4548]

At least you ESC hasn’t burnt up yet

[@goldenmanuever1176]

Mine has.

[@alishanmao]

So far i have never burnt any FlyWing ESC

[@nv180399]

A me è accaduto proprio ieri.sul mio v3...in base alla vostra esperienza..cosa sarà successo?...

[@goldenmanuever1176]

@@nv180399 Tommy when it burned out did you crash?

[@alishanmao]

@@nv180399 how did it happen? I actually even charged my V3 Batteries to LiHV settings 4.35volts per cell. still no issues at all

[@BF1GUN]

When will you be releasing a video on how to install the quick release system? Mine is due to be delivered soon. Thanks.

[@alishanmao]

once i get back to China. 8th August we will return.

[@luqmankajari3191]

Please help me with some information about the Zeno 2 Plus drone. Thank you very much

[@alishanmao]

very sorry, i do not support hubsan and their products anymore.

[@user-ry1mw7tn6h]

素晴らしい飛行ですね😉🐭😉✌️

[@alishanmao]

Thank you so much

[@ThomasGro-er9sf]

Really good item, especially for transportation. Question, can I use this quick release part also for the FlyWing Bell 206 V3?

[@alishanmao]

do not think so, it makes blades longer and will strike tail blade maybe

[@ThomasGro-er9sf]

@@alishanmao thank you for your prompt response. I think you are right. Which helicopter looks more realistic, the bell 206 v3 or the huey uh-1 v3? Both are really nice and have similar the same flight characteristics. And by the way, you are the best expert in presentation of rc models. Best regards Thomas

[@alishanmao]

@@ThomasGro-er9sf there will be a quick video about Bell 206 V3 fuselage soon. For Huey V3 I would say wait, The V4 is coming and it is more realistic and improved

[@ThomasGro-er9sf]

Thank you. I will wait for the Huey UH-1 V4. By the way. The Airwolf V2 is really nice but why does it not have a pull-in suspension? It would be more realistic during the flight. Maybe you can inform FlyWing about it 😉😁

[@RGCbaseace]

Will it fit the fw450lv2.5 ??? I challenge you to try I don't have both assemblies to try is It possible? Are the shafts same main bolt size controls arm lengths maybe only head recalibration? I would love too try it but don't want too if many things have to change yes no maybe ❤ looks like only a new swash plate and the unit if the shaft dia is the same ??

[@alishanmao]

if i had my 2.5, i would try it. but lucky me, those were sold out lol

[@Tagbart]

If I order a FlyWing FW450 V3 GPS Helicopter today, Does it come with the quick release or do I have to order it separately? What store would you recommend ordering the heli from? I live in Norway

[@alishanmao]

I believe you need to check this with the seller. if you are ordering using my links in description, talk to them before ordering and they will reply quick.

[@Tagbart]

@@alishanmao Thank you for your answer. Rc Going are sadly out of stock. Can you recommend another store to buy from that has the helicopter in stock?

[@alishanmao]

@@Tagbart just order it, they will have stock soon

[@THEMIGHTYCB]

Neww V3 coming soon. Which way for orientation do I mount gps on top for Airwolf? I want to make sure I install gps the correct way

[@alishanmao]

I mounted GPS inside fuselage, cable facing to rear of heli

[@THEMIGHTYCB]

@@alishanmao Man I’m really devastated. I only got 90 minutes of flight time with my FW450 Airwolf and had that servo fail mid flight. It swayed back and forward and followed the exact CG of battery nearest the front. I’ve spent so much money and will email FlyWing as I’m saddened by the incident and the damages caused to the Heli. I’ve tried to look at servos but I’m not experienced enough with them to do any replacements as I’m not confident with swashplate adjustments or any recalibration of servos etc.

[@alishanmao]

@@THEMIGHTYCB Sorry to hear that buddy. It should be easy to replace the servo. a little bit adjustment needed to level the swash which is easy with assist program.

[@chriswagoner6875]

I just got these...should we change any parameters from your first setup being there is more aluminum..my v3 helicopter doesn't auto roll good anymore..my settings are from your last video where you showed us...unit was calibrated..my gps isnt a black box tho like what im seeing that now is new..any help plz and thank you anyone..

[@alishanmao]

when i get back, i will play with settings more. right now in thailand. will do some videos about new setup

[@chriswagoner6875]

@alishanmao thank you and safe travels

[@enlightened9538]

Looking forward to how to Install new head

[@alishanmao]

once i get back to China, I will do a video

[@SayemsWorld]

Sorry to say that I didn't find the BIG like button you said 😂

[@alishanmao]

damn, they did not make the big like button yet? hahahaha just hit the like button with love

[@user-ug8zr5gg7d]

does the quick release system work on V1 and V2 helis as i have V2 heli

[@alishanmao]

checking with flywing and will update in a pinned comment

[@luchomartell3047]

Let me ask you about 3D if you fly in easy way commands are the opposite or are normal?

[@alishanmao]

normal

[@goldenmanuever1176]

Hey Ali, happy to report mine just shipped, as a side note, wanna hear something funny? I got my new FW450 motor today and the grub screw used to hold the pinion on was 3 X too long....so, tightened down all the way, the screw was sticking PAST the gear itself. You know well enough OMP, Goosky and YuXiang would never do something that off the wall! What is FW doing over there? If someone didn't know what they were doing and spooled it up, the spur gear, driveline, motor and ESC would have been destroyed! Ugh! 🤷‍♂🤷‍♂🤷‍♂🤷‍♂

[@alishanmao]

Ah man. Flywing sure needs to pay more attention to QC and inspections. I will again emphasize on this to them

[@goldenmanuever1176]

@@alishanmao Ali I threw the screw out wished I could of shown you this. I did chuckle it is funny and then I was like you “omg man” 🤣🤣🤣🤣😂😂

[@THEMIGHTYCB]

Does it matter which port in the receiver to plug led lights into? I don’t wanna cause any interference Also, can I use my pc on the field offline to complete calibration?

[@alishanmao]

Which LED lights are you talking about buddy? these have built in batteries, you charge them. thats all. no need to plug anywhere: bit.ly/3KxfM3l no need internet connection for compass calibration

[@THEMIGHTYCB]

@@alishanmao I got myself my own led aircraft navigation lights. They need to go into receiver to power them.

[@willp3137]

​@@THEMIGHTYCBI connected my LEDs directly to power supply using balancing port on the lipo using small extension. Personally, find it easier that way as it does not require adding any module connected to receiver. Just need to plug manually when I fly night time. Hope this helps you.

[@victormadison3719]

Where can I purchase the FW450 V3 mechanics (complete assembly)?

[@alishanmao]

here: bit.ly/fw450v3parts

[@reginaldmcnab3265]

5:22 can a RadioMaster tx16 fit in the carry case?

[@alishanmao]

its a big radio but if you do some careful cutting, you can fit it in

[@reginaldmcnab3265]

@@alishanmao Thanks for the reply: From just looking at the video, that carry case is so beautiful! I wouldn’t want to cut it🙂

[@luke4800]

do they all come shipped with them pre-installed now?

[@alishanmao]

I am not sure. check with seller before ordering

[@pahlevan1352]

can these also be used on the 450 V2.5?

[@alishanmao]

I am not too sure.

[@trebor1973j]

Can you recommend a good source for flywing fw 450 v2 parts i am a long time subscriber

[@alishanmao]

yes get them here: bit.ly/fw450v3parts

[@trebor1973j]

@@alishanmao thanks 😊

[@henryhartsfield4574]

Will it work on the 450 2.5

[@alishanmao]

I do not have confirm news now if it will work on older models

[@jeffgrizzle5476]

What is the top speed in GPS mode?

[@alishanmao]

max i have done is 100km

[@donhale4137]

How to add quick release system to the version 2

[@alishanmao]

it should fit but i have not tried it so can't say for confirm

[@charlesdronenaveia]

Salve irmão

[@alishanmao]

Thanks buddy 👍😀

[@mdjalaluddinprodhan6140]

whats the price ? me from bangladesh and want to buy

[@alishanmao]

check links in description

[@willp3137]

Hi Ali... ordered the quick release and absolutely loving it!!! Awesome improvement to make assemble and disassemble supper quick and easy! One note as you are always working on improvements... why not led night blades for this heli. Can't find anything on the web nowadays... your thoughts

[@alishanmao]

Glad you like it! LED light blades used to be available before. maybe flywing will do something like release a night flying light combo that can be plug and play

[@willp3137]

Would be great if they could... perhaps you can put in a good word and make it happen... 😉 Best yo you and look forward to new vids!

[@luqmankajari3191]

Asalamw halekwm brother can you help me please

[@alishanmao]

wassalam. for helicopters yes, for hubsan no