Just a quick over view of the modifications on my 2004 Nissan Xterra. Suspension lifts, body lifts, armor, tires,, and all sorts of goodies.
Пікірлер: 139
@vermontvermont92923 жыл бұрын
You should go through and paint all the suspension/frame etc with por15 or similar product. Looks good, and protects.
@XterraRob3 жыл бұрын
I have heard good things about POR 15
@MrHellfinger6 жыл бұрын
Your steering mods are strong. I'm taking notes here. Thanks for posting this video!
@XterraRob6 жыл бұрын
+MrHellfinger thanks for watching and commenting! Glad you found a few things noteworthy!
@0riginall3376 жыл бұрын
My powersteering on my xterra is shit
@XterraRob6 жыл бұрын
Thats no good. What seems to be the problem? What year xterra?
@0riginall3376 жыл бұрын
Xterra Rob 2004, it is leaking fluid and it has alot of problems with the suspension. Just replaced the bushings, new shocks, and new balljoints
@0riginall3376 жыл бұрын
Also my gas pedal started vibrating when I accelerate and i also desperately need a front alignment
@SeanOMatic5 жыл бұрын
Amazing Xterra. I've got to redo the suspension on mine.
@XterraRob5 жыл бұрын
Thanks for watching!
@ballejosRB113 жыл бұрын
I got those matte love those
@XterraRob3 жыл бұрын
Awesome thanks for sharimg!
@ticoalochancho7 жыл бұрын
She's gorgeous
@XterraRob7 жыл бұрын
ticoalochancho hey thanks for watching ! do you have an xterra too?
@plutosforest4 жыл бұрын
Might get one tomorrow... To me they seem like poor man's 4runners but I'm poor so I guess it's all good.
@XterraRob4 жыл бұрын
I bought mine because I didn't want to spend an extra 2k for a used 4 runner of the same age and capability. Youre not wrong!
@plutosforest4 жыл бұрын
@@XterraRob my thoughts exactly. I found an 03, 213,000 miles, two owners and squeaky clean record. Will aim to get it $3,000 out the door. Similar 4runner might cost $6,000.. LOL. Wouldn't be surprised. Anyways, whether I buy it today or not, your channel has been a humungous help. I learned so much about these vehicles from your videos. Thanks.
@XterraRob4 жыл бұрын
Awesome, could be a good find. Thanks for the comments!
@plutosforest4 жыл бұрын
@@XterraRob well, I didn't get it. First, went to the wrong location (their mistake) then found out it had 3 trouble codes and leaking oil everywhere. They said it had no problems.. "runs and drives". Two trouble codes were about a misfire, no big deal. Other code I wasn't sure of: "vacuum cut bypass valve" or something like that. Not a dealbreaker, but the oil was. Oil under the front, sides, and rear. And here I was getting concerned about my Sequoia's valve cover gasket. I wonder if this Xterra is a lemon or if their seals start to break down at 200K+ . What could the owner have done to get it leaking so bad? BTW, the frame was in excellent condition, I was really surprised. They might have some extra rust proofing or something similar.
@XterraRob4 жыл бұрын
That sucks man! Id say that rubber components are likely to wear out at this age just due to time aging regardless of miles. I had to replace rotted coolant hoses on mine at 100k (12 years old at the time). I have a rear main seal leak right now that I'm debating whether I should fix it or not. I just leave Amazon cardboard on the garage floor for now :/
@lukekranyak5 жыл бұрын
Do you have a link to the backup camera?
@ryanbauer84247 жыл бұрын
Nice video man. I'd love to get a prerunner for mine
@cyranoburleson42404 жыл бұрын
i usually watch your videos while i'm working on my car and i'm is xnation for years but i was there was an easier way to get in touch with the group.
@XterraRob4 жыл бұрын
Whats your name on XN? If you need me you can just comment on whatever my latest video is. I answer everything I see come through.
@cyranoburleson42404 жыл бұрын
@@XterraRob oke thanks man. i'm bursje on xn and now also on IG and FB.
@dronejunglistplatoon4 жыл бұрын
this was great! thanks for the insight.
@XterraRob4 жыл бұрын
Thanks for watching!
@RevengeAvenger Жыл бұрын
Crap. I just purchased Mile Markers for my 2002. Do you know if they have changed their public opinion in the last 5 years. Everyone I know with them, loves them
@XterraRob Жыл бұрын
I have only ever heard good things about them. I think my issue was specifically the snap ring on the end of the axle wouldn't stay seated so it allowed the hub to loosen up. I think it would have been fine if my snap ring was working as it should. I swapped out my CV axles and snap rings when I changed to Warn hubs and never had another problem. Pretty sure my Mile Markers would have been fine too with a new snap ring and axle shaft
@kyplummer36574 жыл бұрын
Pretty dang good looking paint for 400 bucks!
@XterraRob4 жыл бұрын
Its held up well! Its showing age now and has a few spider web type cracks but still a lot better than it used to look!
@XterraRob4 жыл бұрын
Its held up well! Its showing age now and has a few spider web type cracks but still a lot better than it used to look!
@kyplummer36574 жыл бұрын
Xterra Rob I recently purchased an 04 as a second vehicle and I’m excited about cleaning her up I’m doing the plastics now and need some good tires for it. Thanks for the video.
@XterraRob4 жыл бұрын
Happy to help! Thanks for watching!
@stevieg24403 жыл бұрын
Could you help me find a front bumper like yours for a 2003 nissan xterra. I'm having trouble finding them.
@XterraRob3 жыл бұрын
My bumper was a custom one off build from a local fabricator. Best way to have a custom bumper built is to look on Craigslist for local fabricators or find local off road clubs or forums and ask around if anyone has a tube bender, grinder and welder. I basically took the stock bumper off and left my truck at the guys garage for a couple days while he built it to size on the actual vehicle. If you want a bumper made for an xterra right out of the box, then Google search for Shrockworks, PP Engineering, or Calmini.
@Warren01s10 Жыл бұрын
So what glue/spray did you use on the headliner i also have an 04 with a sagging headliner and need to redo it
@XterraRob Жыл бұрын
I ended up using a spray paint. I did it with a 3m spray adhesive and it melted by the time summer rolled around and it was sitting in a parking lot. There are other options that are probably specific for headliners and can handle the heat but I didn't want to deal with it again.
@lanceliu47206 жыл бұрын
can you make a video on how you made that back bumper and more in depth about the front one with the skid plate on it thanks
@XterraRob6 жыл бұрын
Sure. Ill add that one to the list.
@discgolfmark64445 жыл бұрын
Right on . Well i guess i will probably be finding out. How do you like it for comfort on long rides? Im planning on taking it on a summer long trip down highway 1 on the west coast and may keep going after that who knows.
@XterraRob5 жыл бұрын
Comfort is subjective. Its a 15 year old truck. Back seats aren't very comfy, but fronts aren't bad. Depends what you're used to though. I've never had a vehicle with 12 way electric adjust memory foam 7 way recline with active ventilation and heated seats. Maybe I just don't know what I'm missing?
@discgolfmark64445 жыл бұрын
@@XterraRob lol ya man me nether i joke about just test driving the seats not the cars lol
@XterraRob5 жыл бұрын
Hahaha!
@BOBMAN19804 жыл бұрын
I am seriously considering purchasing a 2004 Xterra for slightly less than $4000 (I'm probably going to try and negotiate for a bit lower). Any owners of this vehicle are free to talk about the vehicle. . .esp. the reliability. thanks
@XterraRob4 жыл бұрын
Major components are generally pretty rock solid. On a vehicle this old now...main concern would be nuisances of degraded rubber parts. Oil or coolant drips...AC performance due to refrigerant leaks, etc. Ask about routine maintenance...oil changes and spark plugs...and timing belt. Typical old vehicle stuff but not too bad. If you are handy with a wrench...you can do a lot of that yourself for a couple hundred bucks. If not, its worth the cost for a pre purchase inspection from a mechanic.
@zachmiller95435 жыл бұрын
Hi! Great video! Have you noticed any lack of power due to the 33’s? And is there a way to correct your speedometer after switching to 33’s?
@XterraRob5 жыл бұрын
Definitely slower on 33s. Of course armor and winches and lifts dont help. The speedometer isnt off much. I just let it ride.
@zachmiller95435 жыл бұрын
Xterra Rob Awesome! Thanks for replying!
@XterraRob5 жыл бұрын
No problem...thanks for watching
@TheBobertVR6 жыл бұрын
that looks awesome. what was the total cost ?
@XterraRob6 жыл бұрын
Total cost...?! Don't make me cry thinking about it! Its a tough question, because some stuff I had to redo because I didn't do my research, or some stuff needed replacing anyway so I might as well upgrade it. Some stuff I made...but bought tools to fabricate it (bumper, tire carrier). I'm a hobbyist, so I just incrementally tinker with things. The money spent, I consider it more of a recreational expense than an automotive expense. Ill try to make an approximate list though in the next comment...
@XterraRob6 жыл бұрын
Front bumper: $450 Rear bumper and tire carrier: $300 materials only Body lift: $150 total including relocations Suspension lift: $550 (UCAs and Adjustable shackles) Steering: $500 pieced together (not counting trail spares or repairs) 5 Tires: $1000 Winch: $250 Rock sliders: $200 used CB equipment: $75 Light bar on bumper: $50 Maaco paint job and dent repairs: $1000 Truck: $8500 like 5 or 6 years ago. ...anything else you want to know?
@gaara101225 жыл бұрын
@@XterraRob w h y
@XterraRob5 жыл бұрын
Because I can.
@johnnyranger94893 жыл бұрын
hey rob. your trck is sexy. i need your help, i dont understand why you needed to modify your idler arm and pitman arm. was the grassroots centerlink not enough to keep alignment? or did you want to overkill it? im not a smort man, please excuse my ignorance.
@XterraRob3 жыл бұрын
Mostly overkill. It's like a chain...strengthen your weakest link, and the next weakest link is your new weakest link. Repeat until everything is stronger!
@adammontgomery14056 жыл бұрын
Thanks for the video I’ve been looking for a front Locker. But Does the front Locker make a big difference in the way it drives on road. In conditions where you would still need or use four-wheel-drive.
@XterraRob6 жыл бұрын
Depends on road conditions and how often you drive in snow. I am in the south so drive in snow 1 or 2 times a year and for relatively short distances. I usually lock in my hubs and shift in and out of 4hi as snowy or icy patches emerge on the roads. If you have lots of traction (only patchy snow or wet roads), 4wd with a lokka will have more steering efforts ... But in those instances I stay in 2WD and let the weight of the vehicle keep it from sliding. Its all a spectrum...more friction between tires and road = more steering efforts and feedback from the lokka...but it also reduces need for 4WD. More snow coverage and less friction between tires and road = smoother lokka operation = more need for 4WD. If say I just made some slight adoptions to my driving style: little more finnesse on thr gas pedal, and let off the gas during tighter turns so the lokka ratchets. No issues for me.
@adammontgomery14056 жыл бұрын
Thanks I more than likely get lokka for the front of mine also
@XterraRob6 жыл бұрын
adam montgomery great mod if you go off road at all! Great traction. Let me know if you have questions on installation.
@endotron6 жыл бұрын
Awesome video, lots of great tips! I'm looking at a backup camera and was wondering which one you got, do you have an amazon link? Thx
@XterraRob6 жыл бұрын
I dont recall which one it was, though I know it was a cheap no name brand around 20 bucks. It was a flush mount camera that came with wiring but no screen. I bought the screen separately for less than 20 bucks on Amazon. I got them as gifts ...but let me see if I can dig the specifics up...ill be back!
@XterraRob6 жыл бұрын
Tiker was the brand of the camera. Works pretty awesome. I like it. You can just do a search for tiker backup camera on Amazon. I got the flush mount one with white LEDs. If you have a stock rear bumper, if probably try a license plate mount light instead. My plate is off center for my tire carrier and hitch...so I didn't want my camera view to be skewed.
@endotron6 жыл бұрын
Awesome! Thanks for the info and tip. You don't happen to have an install video of the LCD screen do ya?
@endotron6 жыл бұрын
How did you run the cable from the cam to inside the cab. Drill a small hole above the spare tire? I'm doing the install this weekend. Cheers!
@XterraRob6 жыл бұрын
There is a rubber grommet under the rear of the cab. Open up the hatch and look inside where the plastic side panels are in the cargo area. Both sides have a little cubby hole with a bungee net thing. If you take the panels off and look under where that cubby hole is...there is a hole (on both left and right side) with a rubber grommet. I took a sharp punch and poked a hole through it to run the wiring...so the rubber still sealed water from getting in. You can then run it up and behind the head liner panel...or below the carpet. I recommend putting the monitor on the dash somewhere. I had mine up top with the thought that I coukd see my rear view mirror and cam at the same time...but heat would cause any adhesive to drop it. I had to relocate it. Did all that make sense?
@fernandocabral2755 жыл бұрын
Hey rob did you use extended shocks with your 3inch suspension lift
@XterraRob5 жыл бұрын
I did bilstein 4600 shocks (also known as bilstein HDs) the blue and yellow ones. Picked them up from 4x4parts.com. I got the 3"lift shocks for the rear axle. I dont remember if the fronts were extended or not...but if they had them listed, I did choose the lifted option.
@bayardocordoba62496 жыл бұрын
Hey Rob, do you have any vids for the 2" body lift? am trying to get into that on my 04 Xterra.
@XterraRob6 жыл бұрын
"Tips and Tricks for thr Body Lift on the First Gen Xterras" or something to that effect. Also have a 2nd video called "Body Lift Extras: Relocate Radiator or hoses, Front Diff Breather" I have a playlist for xterra mods and fixes on my channel page where you can browse through the different videos
@bayardocordoba62496 жыл бұрын
Xterra Rob nice man.. very nice video, very instructive.
@XterraRob6 жыл бұрын
Cool glad I could help. Let me know if you have other questions.
@discgolfmark64445 жыл бұрын
Hay like it.... I'm thinking of getting a 2004 i found. want to put a tent top on it. Want to know if you ever had one on there and as to how you fill about the rollover filling of this ride. would have a small 4x5ft utility camping trailer on back too.
@XterraRob5 жыл бұрын
Never had a roof top tent, they are usually pricey. Ive seen some available on the internet though. No complaints about the rollover feeling of the vehicle. I dont tow, though.
@discgolfmark64445 жыл бұрын
@@XterraRob Right on . Well i guess i will probably be finding out. How do you like it for comfort on long rides? Im planning on taking it on a summer long trip down highway 1 on the west coast and may keep going after that who knows.
@kingj1986 жыл бұрын
you might have said it but where did you get the back bumper
@XterraRob6 жыл бұрын
Made it myself.
@NSRS15 жыл бұрын
Do you have a Bulb # For the LED interior lights?
@XterraRob5 жыл бұрын
Just went to auto zone and matched them up.
@gogaeradze96527 жыл бұрын
nice one!! I got the same colour same year but Manual )) Love ma boy ))) do you by any chance have some blueprints of the spare wheel mount on the back? really want to relocate it too. cheers!
@XterraRob7 жыл бұрын
Goga Eradze thanks for the comment! No specific blue prints, but I could make a video with more detail. Its pretty basic but functions well given the cost of materials to make it...probably under $200 if you already have a welder and angle grinder.
@gogaeradze96527 жыл бұрын
Rob C thanks mate! as i see u got a different type of a bumper, i have a stock one, so i gotta deal with it first....
@jamescloer15713 жыл бұрын
How does the mud terrain tires do at Uwharrie?
@XterraRob3 жыл бұрын
Great...although I haven't been out there when it was wet with all the clay and mud it can get. I rock some general grabber all terrain tires now that work really well too.
@jamescloer15713 жыл бұрын
@@XterraRob Awesome thanks. I have a 01 xterra.
@XterraRob3 жыл бұрын
Nice...you take it out to Uwharrie much?
@jamescloer15713 жыл бұрын
@@XterraRob No. I just bought it a week ago. Plan on taking it when they open this year.
@XterraRob3 жыл бұрын
Awesome man it should be fun! Have you been before? I have a series of videos called Uwharrie Trail Tours that shows how to navigate the different trails. May want to check them out.
@gideonsimmons80156 жыл бұрын
I bought Nissan terra floor mats and N issian seat covers
@XterraRob6 жыл бұрын
Nice! Do they fit and look good?! I want some seat covers for mine...but not sure what kind yet!
@gideonsimmons80156 жыл бұрын
They fit real nice my 2003steer has a small hook on to it nicely and have a XTERRA stamped on it and the seat covers are black sythetic leather with NISSIAN stamped on them I got the on eBay around 70 bucks
@ebbiketrip24974 жыл бұрын
Where is your backup camera mounted?
@XterraRob4 жыл бұрын
Inside my trailer hitch. I don't tow. I put a hitch cover/plug inserted into my hitch, drilled a hole through the face, and used a flush mount camera so its protected inside the hitch.
@ebbiketrip24974 жыл бұрын
Xterra Rob thanks man. I tow and carry a bike rack so I am looking for an option up high. I owned an X new in 99 and just picked up an 02 a couple months ago as a project. “ReXy” is getting a freshly rebuilt Vg33e this week :). Started watching your vids before I even found the rig. Thanks for all you do brother!
@XterraRob4 жыл бұрын
@@ebbiketrip2497 thanks for the commemts man!
@osakaboyz997 жыл бұрын
A 2004? Has 15x7 wheels weird my 2002 has 16x7
@XterraRob7 жыл бұрын
Osaka Boyz nice observation. I had the 16x7 wheels originally but got caught up in the spray on bedliner craze and blacked them out. It didn't hold up and faded and looked bad, so grabbed the 15x7s on Craigslist.
@E5mma_combat5 жыл бұрын
Why did u relocate power steering hose and how did u do it ?
@XterraRob5 жыл бұрын
With the body lift...the cab and body move upwards off the frame. Power steering reservoir is mounted on a bracket on the passenger side fender. The hoses go down to a hard line mounted to the frame. You need to either replace the hose with one that is 2 inches longer or make the bracket sit 2 inches lower. I cut the bracket and welded it back so the reservoir was sitting 2 inches lower. That way it doesn't over stretch the hose.
@E5mma_combat5 жыл бұрын
Oooh ok thank you appreciate your help
@XterraRob5 жыл бұрын
Yeah No problem. Happy to help!
@sstac86446 жыл бұрын
What would you recommend for my front steering? I have the exact same lift but only have the 4x4 parts steering brace on the pass side and a steering stabilizer. My alignment has been terrible and each time I take it in for an alignment it seems they can’t get it right.
@XterraRob6 жыл бұрын
+SS Tac that is a loaded question. One that I actually have a lot of experience with because it took me years to get everything sorted out and reliably aligned. Ultimate answer is that most alignment techs are stupid and you need a heavy duty center link, calmini steering system or something similar (king Kong, custom fabricated, etc). I will work on a video today with some tips on alignments and steering systems. Great topic with a lot of confusion around them. Everyone knows that lift kits are sexy, but steerirng systems and alignments don't get the same love.
@XterraRob6 жыл бұрын
+SS Tac what are your alignment numbers? Did the shop print out the results for you?
@sstac86446 жыл бұрын
They did not. I’m gonna take it elsewhere soon.
@XterraRob6 жыл бұрын
SS Tac alright...I'm editing a video on this and hope to have it completed in a day or two. I can answer basically every question you have on thia...but its a topic ill thoroughly cover in the video or 2 ill post. Lots of things to consider and think about.
@XterraRob6 жыл бұрын
+SS Tac just posted the first video with alignment specs, overview, and how to get your alignment close to what you want. Next video will be on weak points in the steering system and how to reinforce them.
@bakhosrachwan58206 жыл бұрын
how is the xterra different from the pathfinder? is it shorter or same length?
@discgolfmark64445 жыл бұрын
look up the specs bud. lol
@michealponce31126 жыл бұрын
Did you put your body lift on or did you have someone else put it on. If you did it yourself can you share a few tips on how to put it on
@XterraRob6 жыл бұрын
+Micheal Ponce I put it on myself. Any specific questions or concerns? I can do a video series with a lot of different tips and techniques. It's a long topic to cover
@michealponce31126 жыл бұрын
Xterra Rob yea a video would be really nice
@XterraRob6 жыл бұрын
+Micheal Ponce any specific questions I can answer for you? Or just start from the beginning and explain it all?
@michealponce31126 жыл бұрын
Xterra Rob explain it all i guess. I really just don’t know anything about it. That’s why I came to you
@michealponce31126 жыл бұрын
So I installed 3in control arms from 4x4 parts on my 03 xterra and I didn’t notice any difference in height. I already had my torsion bars cranked before I put the new control arms on. After I installed the arms I cranked the t-bars up all the way and it only lifted it a little. What could I have done wrong? Maybe my torsion bars are not as strong anymore causing them to sag and not get proper lift?
@XterraRob6 жыл бұрын
+Micheal Ponce did you measure the gap at your UCA and the bump stop? If the torsion bars are weak and sag...that causes the whole arm to sag...which in turn gives you more room to adjust the torsion bars. You basically lift until you get within 1/2 inch of the bump stop...and you're done. I should be posting a video tomorrow about the UCAs and lift...and it should help clear a couple things up on the bump stop gap measurements.
@XterraRob6 жыл бұрын
+Micheal Ponce the other option is if the adjuster "finger" in the sub frame (the lever that the adjuster bolt goes through) is bottomed out on the back of the sub frame. Then you may have room at the control arm to get more lift...but torsion bar is out of room. You can do a "re-index" which basically takes the torsion bar out of the spline anchor, rotates it one spline tooth over, and reinstall. This just gives you more room for the adjustment finger to rotate before it bottoms out inside the subframe.
@XterraRob6 жыл бұрын
+Micheal Ponce kind of hard to explain in the comments...but if you can wait until the weekend, I can post a video to better explain the process.
@michealponce31126 жыл бұрын
Xterra Rob No I didn’t measure them, I should have. I also notice that my lower control arms do not go down as much at an angle like many other Xterras with IFS do. I have my torsion bars cranked as far as they can go.
@michealponce31126 жыл бұрын
Yea I understand it a little bit and yes it’s bottomed out on the frame. And okay that sounds good thanks for the help. Will be looking forward to the vid.
@findingabe4 жыл бұрын
How bad were the mile markers?
@XterraRob4 жыл бұрын
Mile markers should be fine. I actually missed a c-clip installing mine which lead to their failures. Should be fine for all but some very tough rock crawling where you have to bump and run uaing that gas pedal.
@findingabe4 жыл бұрын
Thanks Brotha, I do more weekend overlanding and an on-call mallcrawler when parking is bad. LoL 😂 no rock crawling yet*. My stock hubs busted so I was looking for a good replacement
@XterraRob4 жыл бұрын
@@findingabe Mile markers should be good enough, just make sure you put the C--clip back on the axle shaft. I have a later video showing how to install Warn manually locking hubs. Process is the same.
@1menwolfpack5506 жыл бұрын
Where did you get your back bumper
@XterraRob6 жыл бұрын
Fabricated it myself. Local fabricators or DIY bumpers are the most cost effective way to go.
@1menwolfpack5506 жыл бұрын
Xterra Rob cool i might copy is that ok with you?
@XterraRob6 жыл бұрын
Sure thing man. Let me know if you have questions on how I did things or what materials I used etc.
@kyleszarzynski44746 жыл бұрын
I have an 04 Xterra, Silver Surfer is his name. Don’t call it a truck though... But that’s your opinion not mine.
@XterraRob6 жыл бұрын
+Kyle Szarzynski haha the age old debate of what exactly a "truck" is! I call it a truck since it is a body on frame vehicle with same suspension front (independent with control arms) and rear (solid axle on leaf springs) as most pick ups. There are all sorts of trucks...pickup trucks...uhaul trucks...18 wheeler trucks...monster trucks...etc. Not all trucks have an open bed.
@rayburt45696 жыл бұрын
Lol it IS a truck! Body on frame...... it's not a "pickup truck" but you get your ass it's a truck lol