Top 10 Gasmasks That Will Make You Pick up That Can
@ClassyDeerBoi4 жыл бұрын
Love the HL2 reference. Lol
@rtji04 жыл бұрын
and then put it in the trash can
@holdenpop31324 жыл бұрын
And the yeet it at the cp
@abysswalker25943 жыл бұрын
Is it a good game never really played it
@DiegoClaudioSergio3 жыл бұрын
Man of culture I see
@HitachiTRQ-2254 жыл бұрын
4:05 that hole in the top you called it a “carry handle thing” or whatever, I looked into this mask a lot because I absolutely love it, anyway that is an open top for the soldiers head to prevent overheating because it allows they top of your head to release more heat rather than having all of it trapped in the rubber mask
@t-55am2b54 жыл бұрын
Sebastian Sims It has multiple benefits because you have something to grab onto which makes putting it on easier and faster. It uses much less rubber so it’s much more economical, and it also prevents overheating as you said.
@BigBosley6 жыл бұрын
All these Rusky masks are trippy looking. Am I wrong in assuming that the number one design criteria for Russian/Soviet engineers was to make it weird and creepy to [ostensibly] demoralize the enemy? :D
@Weaponsandstuff936 жыл бұрын
I'm sure they made them look like Skulls on purpose as a psychological warfare tactic. The other reason being it was super cheap to make them like this as they all share common parts, just mass produce the parts and design the masks around the mass produced parts.
@BigBosley6 жыл бұрын
Something to be said for economy of scale...
@classifiedclassified56544 жыл бұрын
@@Weaponsandstuff93 where would you get one of these gp6 gas mask plz respond
@enrlichhartman4 жыл бұрын
@@classifiedclassified5654 Pretty rare right now , try on internet stores
@jessemano98804 жыл бұрын
@@classifiedclassified5654 on ebay There Are lots of them
@deegasam39656 жыл бұрын
About that beer I owed ya!
@goofyahhuncleproductions420695 жыл бұрын
im way behind on my beating quota
@kesselsauer44413 жыл бұрын
Sorry for the scare, I had to put a show on for the cameras. We can’t take too long or else they’ll get suspicious. I’m way behind on my beating quota.
@trashboye12355 жыл бұрын
*PICK UP THAT CAN*
@acidisprettygood2054 жыл бұрын
Trashboye I don’t get the joke
@acidisprettygood2054 жыл бұрын
Trashboye is it from half life
@richardwong56164 жыл бұрын
@@acidisprettygood205 yes
@ClassyDeerBoi4 жыл бұрын
Now put it, in the trash can.
@VeryGemmy4 жыл бұрын
@@acidisprettygood205 did you answer your own question?
@alyaspencer77294 жыл бұрын
I actually got introduced to the pmg1 from a modern warfare mission and he looked really cool so I'm looking to get one now
@Weaponsandstuff934 жыл бұрын
Cool
@alyaspencer77294 жыл бұрын
@The Doge-Emperor of Dogekind yup thats him!
@shank90254 жыл бұрын
@@alyaspencer7729 that's my favorite level, j12 made me like pmgs even more
@slavnugget27443 жыл бұрын
Lmao
@KrystaKream6 жыл бұрын
all i can think when I see the mask is the one voice line that’s just “TAKE EM’ DOWN!”
@Weaponsandstuff936 жыл бұрын
LOOK OUT!
@slavnugget27443 жыл бұрын
Its going to sound like pyro
@connorlange5946 жыл бұрын
You should test the 60mm filters with different soviet voice diaphragm threads
@Weaponsandstuff936 жыл бұрын
I'll see at some point if they fit but I think it's going to be a random screw size.
@connorlange5946 жыл бұрын
Most likely, but it would be funny if they still fit in some mask
@jacksonkouns56234 жыл бұрын
@@connorlange594 when you need to filter everything
@charles-vi7qb6 жыл бұрын
I just overall like the design
@Weaponsandstuff936 жыл бұрын
Soviet masks are all creepy looking.
@BOT-MERC3 жыл бұрын
@@Weaponsandstuff93 that's why I like it
@hardrivethrutown3 жыл бұрын
Just got one of these, it's actually surprisingly decent, not to difficult to breath through, not too uncomfortable, personally I use a filter hose to avoid the sag issue. (The intake on mine is hard plastic rather than rubber so it doesn't really sag that much anyway) Mine was manufactured in 1991 and has more holes on the voice diaphragm cover as you mentioned. Oh yeah and Pick Up That Can!
@sabahattinkayrul1026 Жыл бұрын
The fact that the diaphragm has more holes indicates that its a 70m
@Placeholder1225 Жыл бұрын
@@sabahattinkayrul1026 actually late versions had more holes, and holes are a terrible way to tell, on the 70m theres a orange-ish band around the diaphragm
@sabahattinkayrul1026 Жыл бұрын
@@Placeholder1225 thanks! Didn't know that
@victorman22274 жыл бұрын
Just got myself a PMG-1 in size 2, and it is the most comfortable mask i have compared to my gp5(size 3) and size 1 ShMS.
@vj31376 жыл бұрын
Nice! I’ve always liked the PMG. Quite a cool mask if you disregard the filter intake and how tight it is. Hoping to get one sometime.
@Weaponsandstuff936 жыл бұрын
As long as you size up with the mask it isn't all that uncomfortable.
@b.muhi.62306 жыл бұрын
That mask looks really good Nice vid btw!
@Weaponsandstuff936 жыл бұрын
Thanks
@7thSpring6 жыл бұрын
I really like your channel, thanks for sharing lots of great info and keep up the good work.
@Weaponsandstuff936 жыл бұрын
Thanks
@goofyahhuncleproductions420695 жыл бұрын
i kinda want to get one of these... I already have a GP-7v but i kinda like the look of this one because it looks like a metrocop mask plus i need a real light weight one.
@Weaponsandstuff935 жыл бұрын
Makes a far better face seal than the gp7 as well
@stevensurack29236 жыл бұрын
Remaining units contained...
@zetazane6 жыл бұрын
4:35 *Big brother is watching...*
@ignorethischannel69566 жыл бұрын
What did he say or do
@ignorethischannel69566 жыл бұрын
Ok?
@Pedro17454 жыл бұрын
I can see you are a person of culture
@declan75514 жыл бұрын
@@ignorethischannel6956 listen to what he says at exactly 4:35
@benmartin61375 жыл бұрын
Will be buying this mask after watching this video. Thank you very helpful
@Weaponsandstuff935 жыл бұрын
Cheers
@Kryddoson6 жыл бұрын
Really cool looking mask, good video!
@Weaponsandstuff936 жыл бұрын
Thanks
@howicrashed78782 жыл бұрын
To be honest I never even knew their gas masks and Half-Life 2 I just thought this is an interesting gas mask
@ivory2314 жыл бұрын
Personally I love Russian Gas Masks they might look scary that makes them intimidating.
@hauptmannfriedrichkonrad41056 жыл бұрын
my pmg voice diaphragm the steel part is rusted is it still ok to use??
@Weaponsandstuff936 жыл бұрын
As long as it's not leaking yes.
@_Anti_Communist_4 жыл бұрын
Cool, scary looking
@girlwithgreenhairpfp3 жыл бұрын
So I was thinking, since in the PMG-1 the filter attachment screw is made of rubber, do you think it could be possible to put a 40mm NATO filter and make it effective? I was thinking the rubber would make it to where it could stretch or flex around the 40mm NATO threads.
@Shootinstuffss6 жыл бұрын
you have a hammer and sickle on your door
@Weaponsandstuff936 жыл бұрын
No I don't.
@shmokeythefatcat5 жыл бұрын
@@Weaponsandstuff93 yes you do
@davidherron91514 жыл бұрын
He is referring to the knotting in the wood of the door
@betaium4 жыл бұрын
Where?
@seven-sixtwo7624 жыл бұрын
"GAME OVER, SUKA!"
@AK47avtomat4 жыл бұрын
THE GENERAL DOESNT LIKE LITTLE TERRORISTS!
@shank90254 жыл бұрын
"COME OVER, SUKA"
@SilentYeti69 Жыл бұрын
Interesting. I never really had any major problems with the PMG when I got it. In fact, I found it actually much more comfortable than the GP-5. To be fair, the GP-5 that I own is Size-0, but you get the point.
@o80y12 жыл бұрын
“…made in 1984, this one…” 😳
@tabbyclawproductions79436 жыл бұрын
Before watching: This is one of my favorite masks I have. I sure hope they aren't made out of cancer or something! In my opinion, stuff like that is one of the creepiest parts of gas masks. They saved people from gas, and later gave them cancer. The thought of being slowly killed by something you thought could save you- without ever knowing. And even now, some people unknowingly use old filters, and stuff. They don't know that they are slowly poisoning themselves until they read about it. And by then, it is too late to go back.
@tabbyclawproductions79436 жыл бұрын
After watching: Thank goodness it isn't made of cancer and death! But holy crap, did he put it on with a filter attached?!
@Weaponsandstuff936 жыл бұрын
At the time of issue asbestos filters were safe as the filter material was in good condition, asbestos is dangerous because overtime it breaks down into a dust which is then inhaled.
@Weaponsandstuff936 жыл бұрын
That's not a Soviet filter in the video.
@tabbyclawproductions79436 жыл бұрын
What filter is it?
@battyroshko14314 жыл бұрын
So i'm not the only one who likes the PMG because of HL2
@Omega_-cc6pd6 жыл бұрын
That would’ve been hilarious if you were actually able to fit a filter on the front because then you would be able to fit filters on the front and the side and if the filter made a tight seal then you’d still be able to breathe out because the Exhale valve is on the bottom of the mask haha
@Weaponsandstuff936 жыл бұрын
Would probably block the view from the front with another filter on it.
@Omega_-cc6pd6 жыл бұрын
Yeah there’s also that
@sjzee822 жыл бұрын
getting my PMG in just 3 days! ordered it a month ago lol
@ihateyou91813 жыл бұрын
RIP J-12
@bladesmilitariauk50136 жыл бұрын
At this rate your gonna reach 20K subs before the new year, something to celebrate? 100K subs might not be impossible by 2019 but you would have to find another niche. Gas masks are just too specific to appeal to a wide audience. Maybe look into expanding into something loosely related too, like doomsday prepping, which because of the variety appeals to a larger audience especially in the states.
@Weaponsandstuff936 жыл бұрын
I always find it a bit weird when other people seem to be obsessed over my channel stats but thanks regardless. Every time I've tried stuff that isn't gas masks, people barely watch it.
@bladesmilitariauk50136 жыл бұрын
Were like minded so naturally I want you to do well & continue what your doing. There's only so many gas mask videos you can make before you run out of ideas. I don't mean to tell you how to do what your doing, just trying to remind you of the inevitable. Maybe consider just do one vid a week or two weeks on something loosely related to try & zone in on how your content could adapt & subs increase. To me it is a no-brainer that prepping videos whether it be advice on MRE's or water filtration etc. it could give you unlimited content that could keep you busy for years :-)
@triadack47505 жыл бұрын
Yeah this didnt age well
@the_vileblood5 жыл бұрын
I love the Russian impression
@luftmoth3 жыл бұрын
" you pick up that can"
@taco64114 жыл бұрын
Are there any PMG 1s that have a hose where the exhale valve would be that would connect to a filter in a pouch?
@jesuschrist42744 жыл бұрын
Can always just connect a 40mm hose to a filter, like a 55cm long one.
@taco64114 жыл бұрын
Jesus Christ Ik, but I’m just asking because there’s a character in a video game that has the hose coming from the bottom so I just thought maybe there was a model that had the hose at the bottom
@jesuschrist42744 жыл бұрын
@@taco6411 oh Well no, that's another video game mask that doesn't quite exist
@taco64114 жыл бұрын
Jesus Christ yeah I assumed that but was just curious
@jesuschrist42744 жыл бұрын
@@taco6411 fairs
@bigshmitty1695 жыл бұрын
Still better than Hunt Down the Freeman
@Blitz-00126 жыл бұрын
My mask has a small bit of rubber poking out of the filter port/hole ( Idk what to call it ). It also has the diaphragm with the smaller but more numerous holes. It is a size 4 made in 1991.
@Weaponsandstuff936 жыл бұрын
That will just be a bit of the valve.
@Blitz-00126 жыл бұрын
I take it that it doesn't matter if it comes off? Since your one in the video does not have it.
@heisenberg23684 жыл бұрын
I bought a PMG today and to the measurement my size is 2 but the masks 4. For all that I had to try about 15 min to get on. Its so tight and small to me. Why that kind a thing happened to me?
@_Michal_Michal_4 жыл бұрын
Yh , I think this mask is smaller and if a size 2 is too small get a size bigger. I might be getting a pmg and I measured that a size 2 or medium would fit me but maybe I should get a large
@brennandunn39854 жыл бұрын
So I recently bought a ShM-2012, and I was wondering if it is a common mask, because I haven’t seen many if at all. Is it worth anything? Is it rare? I posted on a Facebook group and they said it was a nice mask to have...
@videosofmygrandpaeating61424 жыл бұрын
It is a fairly rare mask outside of Russia and Belarus. Quite an interesting mask
@quarantinehitsdifferent52744 жыл бұрын
I am trying to find one but I’m not sure if I should trust eBay
@pabloescobar7802 Жыл бұрын
Love the GP5
@turonavyblue38634 жыл бұрын
I got one made in 1978 from my grandfather he was special operations forces soldier.
@Weaponsandstuff934 жыл бұрын
Interesting
@clubby78935 жыл бұрын
I just bought one of these, is it possible for me to get any anti-fog stickers or coloured lenses for it?
@Weaponsandstuff935 жыл бұрын
The anti fog inserts have long since expired, you can put anti fog paste inside though.
@lewisarthur67786 жыл бұрын
Nice video I really like that mask
@Weaponsandstuff936 жыл бұрын
Thanks
@АннаЖуравлева-з9с3 жыл бұрын
Это же наш пмг Нерехта и пмг-2
@Digger_SPBYT2 жыл бұрын
Урааааааа Русские!!!
@randomrock47076 жыл бұрын
Can you do a video abouth the diffrences between the ShM41 and the ShM62(gp5)?
@Weaponsandstuff936 жыл бұрын
+Random Rock I don't have a shm 41, I've been asked that a lot of times.
@_setanta_6 жыл бұрын
shm 41 face piece and shm62 face piece where both used to make gp 5s the way to tell the difference is with the y beside the sizes
@bencecsiki63954 жыл бұрын
Just reived my size 1 pmg and yes it crushes my head so i gotta get a size 2 and sell my size 1 lol
@germanwarrabbit10 ай бұрын
i really like the PMG both as a gas mask and beause i love HL2, plus, i got an amazing deal on mine *but* it was size 1 so im trying to get myself a size 2
@resurrectbritain62986 жыл бұрын
Mine is literally a nightmare to get on, is there any way to make it a bit more easier and less painful to get on?
@Weaponsandstuff936 жыл бұрын
In terms of less painful shave off any hair, facial and head hair, or just make sure you have the right size.
@resurrectbritain62986 жыл бұрын
@@Weaponsandstuff93 Right, I heard rubbing powder on the tight spots would also help, so I am gonna try that or modify it. Thank you for the idea.
@motus96124 жыл бұрын
Really I just deal with the pain of my hair getting pulled, I use a GP-5 mask so it hurts pretty bad
@dr.strange5484 жыл бұрын
Da random guy Of randomness well if you shave of your hair then no problem
@TobyClaesson6 жыл бұрын
I think of buying an mc-1 (the polish gasmasks) but i need the filter on and i cant hold my breath while doing a 40 min photoshoot. What do. As i am very tight on budget and i need the original colour of the filter. I know they have asbestos in them.
@Weaponsandstuff936 жыл бұрын
+Stan Marsh Maybe don't have the mask airtight so the air can enter from the sides.
@GunsGasMasks6 жыл бұрын
Just ask to take a breath every time
@alexowen10514 жыл бұрын
Awesome mask just purchased one does the nato 40mm filter fit
@Isolierter_Hazim3 жыл бұрын
You'll damage the threads
@dillonhall75142 жыл бұрын
It looks like the Poloski mask from COD Modern Warfare
@Hotlinemiamienthusiast Жыл бұрын
Thats because it is
@Luke-we6id6 жыл бұрын
My pmg and gp-5 were produced in 1977
@Weaponsandstuff936 жыл бұрын
Cool, don't use the filters though.
@Luke-we6id6 жыл бұрын
dont worry
@M9ff1nDuck8rАй бұрын
Pick up that can.
@cyberswiper63174 жыл бұрын
How do you find out the date of manufacture on the gas masks? I have a GP-5 (polish) it has F-146 95. 70.
@Weaponsandstuff934 жыл бұрын
Probably the OM-14 rather than a GP-5 but it's most likely from the 1970, generally with most warsaw PACT masks you get the serial number or batch number, that would be the F-146, a month and a year. So the year would either be 1995 or 1970 but 70 is most likely as it was a Cold War design. Lots for example may say something like 11 70 meaning November 1970 etc.
@_Michal_Michal_4 жыл бұрын
I fit an om-14 size 2 ,should I get a size 3(size up) if I get this one like you said?
@MidnightRobotics4 жыл бұрын
Pick up that can!
@enrlichhartman4 жыл бұрын
I really liked your video good one ,
@Weaponsandstuff934 жыл бұрын
Cheers
@Depwhattube10 ай бұрын
What filter would you recommend for the pmg to make it usable?
@dracowest81224 жыл бұрын
The 4eson I want this mask is just because of J-12 from mw
@BakalovGaming4 жыл бұрын
Draco West lmaoooo same 😂
@Train1157 ай бұрын
Is the rubber around the lenses supposed to touch your face?
@Venom-jk9rr3 жыл бұрын
Russian J-12 from Call of duty modern warfare 2019
@DiegoClaudioSergio3 жыл бұрын
Yeah...
@somethingbacon26946 жыл бұрын
COMBINE!!
@Weaponsandstuff936 жыл бұрын
Yes
@somethingbacon26946 жыл бұрын
I think their awesome
@_nixon_76516 жыл бұрын
Metropolice gas mask!
@Weaponsandstuff936 жыл бұрын
Yes
@cauallyawsome47612 жыл бұрын
The PMG-2 looks like a gp-5 with voice filter and ear holes
@patc55855 жыл бұрын
Can you link me an ABEKP gost filter that could ship to australia?
@justink-kh3ps5 жыл бұрын
Pick up the can
@PistaZOV5 жыл бұрын
If you would put the shms lenses on the gp5m, itd be a shms with earholes and another kind of tissot tube system
@MXnick_4877 ай бұрын
Where did you get the pmg gas mask with the side filter one
@jefi._damier6 жыл бұрын
For me the best part of pmg is the voice diaphragm .
@Weaponsandstuff936 жыл бұрын
PMG 1 or PMG 2?
@jefi._damier6 жыл бұрын
Weaponsandstuff93 Pmg-2 voice are rly cool
@misterr_chadsgaming90202 жыл бұрын
Where do you buy those gas masks?
@lambdrey Жыл бұрын
I bought one at an atombunker/hospital museum, in Budapest.
@kubbakubbynator26214 жыл бұрын
The cheeki breeki series.
@Eugene_Lassalle2 жыл бұрын
what was the mask J-12 was wearing in call of duty
@Dylan-fe4oc3 ай бұрын
This one
@thesearcher85866 жыл бұрын
RANDOM QUESTION who would you help in a apocalypse scenario, also could you get a filter adapter for a gp5
@Weaponsandstuff936 жыл бұрын
My family, and no there are no filter adaptors for GP-5s.
@SlickTwigDotWAVfile6 жыл бұрын
Weaponsandstuff93 I guess you could weld the screw on a gp5 filter to a nato mask intake.
@defconzero4 жыл бұрын
I realize I'm two years late to this, but the other day I found a plastic GOST to NATO filter adapter for like $15 on ebay. It looks neat and includes a rubber O ring. So they apparently do exist now
@chelovek1853 Жыл бұрын
This video made me want to add a PMG to my collection
@avidion62744 жыл бұрын
I own a PMG with fog lenses installed, how do i clean it?
@slavnugget27443 жыл бұрын
Google
@christopher-20006 жыл бұрын
cool video
@Weaponsandstuff936 жыл бұрын
Thanks.
@jesses.71076 жыл бұрын
Could you have put a hose in the intake for the pmg1?
@Weaponsandstuff936 жыл бұрын
Yes but it's silly because it has to bend.
@rayenbadis90586 жыл бұрын
im in another country
@l4d21606 жыл бұрын
Did a black version of the original PMG exist? I've been looking but I can't even find a photo of a black version let alone a listing.
@Weaponsandstuff936 жыл бұрын
I've never seen a picture of one.
@haalandbraut32953 жыл бұрын
What filter were you using
@victorvangrimgamming67844 жыл бұрын
Can the PMG 1 use a hose and run from the filter port to a filter in a bag say on a belt to chest? Also do you know if a hose with proper threading made? If so where can i find one.
@Weaponsandstuff934 жыл бұрын
Yes but it's awkward as the Soviet hoses are not 90 degree connectors, also you'd need a GOST hose, so an old Soviet/Warsaw PACT one or maybe a modern Chinese one if it's GOST.
@Raino-eh1pf4 жыл бұрын
Gas masks to scare your younger relatives
@b6studios1314 жыл бұрын
I actually like the Soviet gp5 gas mask because there's an SCP about it scp-1499
@ugandanknuckles95954 жыл бұрын
i have a pretty big head (like 60cm diameter) and it feels like im literally getting my head squashed every time i put the pmg on, is there any way to fix this or should i just get another one thats a larger size?
@Weaponsandstuff934 жыл бұрын
Get the larger size, for some reason PMGs seem smaller than the other Soviet masks in the same sizes
@BakalovGaming4 жыл бұрын
ugandan knuckles what size is the mask? I have a size 60cm head too and am looking to get a PMG. But I’m deciding whether size 3 or 4.
@ugandanknuckles95954 жыл бұрын
@@BakalovGaming my mask was size 1 and i couldnt even get it on (i know its stupid, but i didnt even know there were different sizes let alone that they mattered so much), i just ordered a size 3 mask which was the biggest one that the seller was offeirng and im hoping it will fit better. my guess would be that too big would be better than too small because if its too big you can still adjust it.
@Night-Owl-4 жыл бұрын
I actually have a pmg mask. Mine has the filter on the right side saddly. Also mines voice diaphragm isnt there. It fogs up pretty bad but I like the mask.
@Weaponsandstuff934 жыл бұрын
Sounds cool as a curiosity like that though.
@Night-Owl-4 жыл бұрын
@@Weaponsandstuff93 also it has a weird red stain in between the eyes. Dont know if its blood or something else. Pretty neat though.
@Mr.Crawlyo3 жыл бұрын
That thing looks awsome is there a price range?
@heavyjuggernaut39122 жыл бұрын
Which PMG would you recommend? Cuz idk which one to go with cuz I like both
@heavyjuggernaut39122 жыл бұрын
@@thatoneguywhouploads That's what I got
@sabahattinkayrul1026 Жыл бұрын
@@heavyjuggernaut3912where did you find a affordable one?
@polarprobe660011 ай бұрын
@@sabahattinkayrul10267 months late lol i got it from ebay for 15€
@seanpacanka44334 жыл бұрын
I bet the ear holes were for a tank headset and helmet. Is it for tankers because if so this could be very likely?
@Weaponsandstuff934 жыл бұрын
It was simply so whoever used it could hear better, and it's cheaper as you use less rubber making masks.
@LudvigJosvason Жыл бұрын
I do have a question, though. I assume the Hungarian 70M sizes exactly the same as the PMG, what size would you recommend for someone with a large head? If memory serves my head's about 26 inches around but "medium" (2) just doesn't really seem quite right unless non-NATO sizing convention is the reverse of NATO sizing convention.
@Dylan-fe4oc3 ай бұрын
Size 3
@GunsGasMasks6 жыл бұрын
When will you be posting your Q&a part 2?
@Weaponsandstuff936 жыл бұрын
Sunday as I mentioned on the last video.
@DrEdgarr4 жыл бұрын
would a hose fit in this mask if you wanted to attach to a bigger filter?
@Weaponsandstuff934 жыл бұрын
Yes
@justinblackfacetrudeau89436 жыл бұрын
think you could fit glasses under these? Curious about buying a set
@Weaponsandstuff936 жыл бұрын
No you would have to take the frames apart so only the front of the glasses is stuck into the mask.
@alexberserk36053 жыл бұрын
That’s weird my pmg voice diaphragm doesn’t make that noise
@Bogdan-fd5ib4 ай бұрын
Gas mask pmg cool😮😢
@alannguyen22216 жыл бұрын
Is there a way to get rid of the smell? My PMG has this really weird and strong smell on it that rubs off on my skin (my Chinese M56 also has a similar smell but is much less strong)
@Weaponsandstuff936 жыл бұрын
It will be a rubber smell, unless you wash the mask not much you can do.
@alannguyen22216 жыл бұрын
Weaponsandstuff93, any recommendations on how to wash the mask?
@alannguyen22212 жыл бұрын
@@thatoneguywhouploads hey, better late than never, lol. The soak won’t ruin the internals of the mask at all right? Also should I leave the voice diaphragm in for the soak or remove it?