All Black PC Build! ASUS Prime AP201 Glass w/ Dual RTX 4060Ti OC + ROG RYUJIN 360

Building an all-black designed PC build with the ASUS Prime AP201 glass, ASUS Dual GeForce RTX 4060Ti OC, and ASUS ROG RYUJIN 360. Thanks to ‪@ASUS‬ ‪@asusrog‬ for sponsoring this video!
ASUS Prime AP201 Glass Case: amzn.to/3QUQYoL
ASUS Dual GeForce RTX 4060Ti OC: amzn.to/3SHjDyO
ASUS ROG RYUJIN 360: amzn.to/47eBiT8
ASUS ROG Strix Z790-i: amzn.to/47e1Ljy
Intel Core i5-13600K: amzn.to/479Lxrv
Corsair Vengeance RGB DDR5 32GB: amzn.to/467IgYE
Crucial T700 1TB: amzn.to/3QSXwUN
NZXT Power Supplies (1000W 80+ Gold used in video): amzn.to/49xijVj
#asus #asusrog #tonytechbytes #pcbuild #custompc
-----------------------------------------------------------------------------------------------------------------------
Business inquiries: [e-mail]
Check out all my social medias: solo.to/tonytechbytes
Music used in my videos: www.epidemicsound.com/referra...
Check out my Amazon storefront to find all the tech I use (affiliate links with no additional cost to you): www.amazon.com/shop/tonytechb...
My ENTIRE LIST of GEAR: kit.co/TonyTechBytes
-------------------------------------------------------------------------------------------------------------------------------
ALL My PC Parts:
(CPU) Intel Core i9-13900K: amzn.to/3VAKSJI
(Motherboard) ASUS ROG Strix Z790-E GAMING WIFI: amzn.to/3H2R6hg
(Case) NZXT H7 Flow ATX: amzn.to/3OTKZxI
(Graphics Card) EVGA GeForce RTX 3080Ti FTW3 Ultra: amzn.to/3XRpQbt
(CPU Cooler) NZXT Kraken Z73 360mm AIO: amzn.to/3FmGn0a
(RAM) PNY XLR8 32GB (2x16GB) DDR5 6000MHz: amzn.to/3FkQmTz
(Storage) WD Black SN850X 2TB (without Heatsink): amzn.to/3EVrosC
(Storage) WD Black SN850X 2TB (with Heatsink): amzn.to/3XJTrDX
(Power Supply) NZXT C1000 80+ Gold: amzn.to/3FjSJ96
(Fans) Lian Li UNI FAN SL 120 V2 RGB: amzn.to/3VNmlB1
(Cables) CableMod Pro ModMesh Sleeved Cable Extension Kit: amzn.to/3uk9Y3M
(Vertical GPU Mounting Kit) NZXT Vertical GPU Mounting Kit: amzn.to/3P9v52F
-------------------------------------------------------------------------------------------------------------------------------
My List of GEAR for recording videos:
AWESOME Camera: amzn.to/3VMb5F4
Versatile Lens: amzn.to/3ukgffQ
Wide Angle Lens: amzn.to/3Ukh9Ug
Standard Lens: amzn.to/3W2kqJl
Telephoto Lens: amzn.to/3UpsulW
High Quality Mic: amzn.to/3EUImqP
Travel Tripod: amzn.to/3EZo8MV
Tripod Video Fluid Head: amzn.to/3XRckon
Favorite Camera Bag: amzn.to/3FhL4bs
Camera Duffel Bag: amzn.to/3gUaimW
Audio Recorder: amzn.to/3B2LU9B
-------------------------------------------------------------------------------------------------------------------------------
FOLLOW ME On My Social Medias!
TikTok: / tonytechbytes
KZbin: / @tonytechbytes
Twitter: / tonytechbytes
Instagram: / tonytechbytes
Twitch: / tonytechbytes
Solo (all links in one site): solo.to/tonytechbytes
TonyTechBytes LLC is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com, Amazon.ca, Amazon.co.uk etc. The Amazon Associates Program gives a bit of commission to the creator (without any additional cost to the purchaser) whenever one purchases from the links in the description.

[@dskztar9348]

The build looks good, don't take it the wrong way, but you could have gotten a better graphics card if you invested in a cheaper air cooler like a peerless assassin, a lower wattage PSU and a M-ATX board... poor allocation of resources in my opinion... but it still looks good!

[@OntarioGuy430]

I have used this case for a while and then went to an O11 Dynamic. After using that for a while I just re-ordered the AP201 - Super nice case, fits a founder 4090 and looks great. I had the all mesh version - I found the temps a bit warm with a 360 Aio in the roof and a 13600k. After some undervolting I am hoping the glass will help air move around properly instead of just blowing out the side.

[@_jiraffe_]

Why did you choose mitx over matx?

[@soddazz_2029]

The 13600k is a bit overkill for the 4060ti but the build looks amazing

[@briankrol]

I find it crazy how your helpful channel has only 50k subs. You will blow up soon ❤❤

[@MarkoVuckovic32]

Great build. I'm considering this case for my own build but most likely the mesh version because tg version has that large PRIME written on the side which doesn't look particularly good in my opinion.

[@THOTHvii]

Ok I have this case and just purchased the Asus RTX 4060 Dual. When I plug it into the slot it looks tilted versus if I remove the mounting bracket (which happens to ground the board) it will plug in evenly.. My question is does it still work? I am using the B660m motherboard, the ap-201 all mesh case and I just don't like how the GPU sits in there when the tab to screw in meets the screw hole on the case.... If that makes sense.. Just seems like the tab could have been a 1/4" longer to make a nice fit.

[@N8.the.Gr8]

Hey there Tony, great video. I’ve been following you for a while I first got interested in your videos when I was shopping for a office chair and you helped out a lot. I also like how you review many things like when you got a Tesla (bc I’m now shopping for one). I’m currently in the market for a gaming pc but don’t have a huge budget (less than a grand total). Any suggestions on which direction to go? Would you recommend out of the box to get me started or my own build? TIA!

[@Tuniyatv]

Gaming powerhouse

[@Direkt_Xero_Gaming]

Insane build dude, that’s a hella fine unit.

[@Jargon]

2:38

[@kimhunter6733]

If you try for 3x bottom intake the right-most fan will not be aligned with the others. there will be a gap unfortunately.

[@johndavis29209]

I recently built my rig with this case but with the mesh side panel. I only have the stock exhaust, my cpu fan, and a single 120mm fan in the bottom and I have never gotten temps above 63-65 degrees for gpu and cpu, and that's only testing the newest games at max settings (7800xt, 5800x3d). Really happy so far.

[@harrisonpayne9010]

Powerful build

[@peachietech]

So clean 🥶🥶🥶 amazing video

[@randermizerINC]

That is a beautiful build my dude 😎😎

[@rompeldipp8488]

Do you think you could fit a 240mm aio at the bottom for thr cpu?

[@RioRex77]

Looks Really Awesome mate

[@katianamariii]

I FOLLOWEDDDDD YOUR KZbin FOR THE PC AND TO SUPPORT !!!

[@Lukini1902]

Nice Build