All Canon G Series Printer Empty Pipe Solution Beginner's Guide with English CC | INKfinite

[@sierakh8249]

God Bless you sir, I did not understand your language but your clear demonstration was perfect, for stopping the flow back of the colors I used some blue tack in the holes soon as i removed the syringes.

[@INKfinite]

Glad it helped! 🙂

[@cjgrafixdesign]

Sir paano na resolved ung G1010 ko kapag nag print... parang may kumakayod sa papel ?

[@bluegarren9361]

Thank you! like sierakh8249 said, I can't understand but your demonstration explained everything. Unfortunately I already did the ink flush and it did use a lot of ink. Question, where did all the ink go? God Bless!! Blue@@INKfinite

[@PracticaProphetica]

@@bluegarren9361 It goes into some sponges at the bottom of the printer. If you do a lot of ink flushes, those sponges will get full and the printer will throw an error (absorber full). At that point, you should either replace the sponges, or run the tube that feeds them out into a separate container (thus avoiding the sponges entirely). You will also need to reset the absorber setting (so the machine doesn't think they are full...otherwise it won't print anymore once this error is encountered). This requires a special set of button presses to get into maintenance mode. Check for other KZbin videos that cover this procedure.

[@KimberlyDMcCallister]

I literally watched half the video before turning on CC.... I was able to understand exactly what you were explaining!!! You demonstrated every step SO well that anyone from any language should be able to follow along! You are awesome!!! Thank you!!!

[@atheist00123]

Same😂

[@kissababe143]

malaking tulong ang piakita nyo sa mga kagaya ko a walang alam sa printer.. salamat po

[@INKfinite]

Thank you for watching! :)

[@djben928]

salamat bro. naubos ko ink ko sa pagsasagawa ng ink flush. salamat sa video mo

[@INKfinite]

You're welcome! Consider subscribing to our channel to help us grow and to get you updated

[@renelyncarmelotes4503]

Salamat po, ito pong video ang talagang hinahanap ko para maayos ko na Ang printer ko nang Hindi na ngbabayad pa sa technician, thank you po.

[@ridesniuncledrew]

thank you sa tutorial na to. naubos ink ko kakaflush.. eto lang pala ang solusyon!

[@INKfinite]

You're welcome! Consider subscribing to our channel to get you updated ;)

[@TrojansWhisk]

katatapos ko lang gawin, sobrang helpful. thank you soooo much po tlga

[@arlynnavarro2785]

thank u so much po..nakatulong po ang video niyo para maayos ko ang printer ng pamangkin ko..Godbless po.

[@meditationrelaxationandhea4403]

that's one of the advantages of Canon and HP madali imaintain...pero napakamahal ng ink cartridge ng Canon G series printers...remember masisira at masisira lahat ng printheads at certain time kaya bago bumili alamin muna presyo ng cartridge at matutong mag-refill on your own. P3,816 per pair ink cartridge ng G series printers at bihira din nagbebenta ng basyo nyan

[@pautanginmo5554]

sobrang salamat lods! nkatipid ako ng 2k para lng dto. dahil jan subscribe ako sayo! solid solid

[@jsssmbrn]

Nakasave ako ng 500 pesos dahil sa tutorial na to! huhu thank you so much po! 😇

[@INKfinite]

Glad to hear that! 🙂

[@9683gggee9dgiwvd]

maraming salamat po sa tutorial...ang laking tulong at natuto po ako❤

[@mindoII]

thank you so much ! bumalik yung ink sa pipe pero after that pag nagpiprint blank paper lang so i cleaned it then deep cleaned and nozzle checked it then i encountered another issue yung black nagiging blue so i had to do ink flush and gumana na 😁

[@INKfinite]

You're welcome! Consider subscribing to our channel to get you updated 😊

[@JFS-JFS]

Ty Thank You Salamat Boos your the Best super linaw ng paliwanag.

[@mannyjoaquin3095]

Naka tulong po talaga ng malaki. Thank you and God Bless Brod!

[@maryjeancepeda4589]

Salammat po malaking tulong talaga to sa akin kc lage natutuyuan ng ink angnprinter namin

[@Dexter-c7u]

salamat!! naayos ko yung printer namin😇

[@albertoangeles1922]

nagdahil sa video nyo sir malaking tulong talaga sa akin lalo na canon printer nmin. lage natutuyuan ang hose ng printer nmin mahal p nmn ang bayad pagdinadala s shop. ask ko lng sir di ba naunlock yong white n yon so kong tapos n need pa bailock yong white? sa akin kc binalik ko. thanks

[@weixing3149]

To move print head to middle just long press STOP button twice while opening maintainence lid. First time long press will make print head go to left edge. If u do it second time print head will go to it's resting position (right side) and then rest in middle like u did. Mine is G3000 series and did work this way.

[@INKfinite]

In the video the printer is turned OFF. So there's no way you can move it using the STOP button. It's not recommended to do the procedure while the printer is turned ON to avoid any possible damage to the timing belt and cr motor. And that's the reason why we showed it in the video how to move the print head carriage manually

[@ArlynaSo]

marking salamat po!!! This was so helpful and finally my colors are printing correctly!

[@INKfinite]

Glad it helped!

[@raquelakelbiongmacalit-oce7159]

New subsrcriber po .. saLamat po sa video nyo na ito .. Ganitong ganito ang nangyari sa printer ko ..

[@INKfinite]

Our pleasure to help! Consider subscribing to our channel to get you updated

[@yoskid3646]

Galing nyo kapatid, me natutunan ako sa yo, salamat ng marami, God bless!

[@feonamariedom-ayan1471]

Very helpful po Sir. Maraming salamat po

[@INKfinite]

Our pleasure to serve! Help us grow by liking the video and subscribing to our channel

[@christianclydeunday5923]

Malaking tulong to sir maraming salamat sa videos mo

[@INKfinite]

Thank you for your feedback! Consider subscribing to our channel to help us grow and to get you updated

[@christianclydeunday5923]

Ilang milliliter ba yang gamit na pang sucking ng ink sir?

[@jenewintv4111]

thanks sir sa pagbahagi ng inyong kaalaman helps a lot..

[@INKfinite]

Happy to help! Consider subscribing to our channel to get you updated :)

[@tripnikuyatv8432]

Salamat brod malaking tulong itong tutorial mo.

[@lindodansoh6267]

I do not understand but i am following.

[@xeniatacaisan6524]

Very helpful thank you po. Paano sya ibalik tulak din ba?

[@cryzen7909]

salamat dahil sayo naka pag negosyo ako hehe

[@mashunx9121]

Thank you so much from North East India

[@INKfinite]

You're welcome! Stay connected to our channel to get you updated ;)

[@basherbikers9714]

Yown oh... Thanks for the tips.. thanks for sharing

[@INKfinite]

Your welcome! Thank you for watching

[@misaelpilipina9023]

Thank you lodi sa idea

[@legaspifam412]

Hi, well explained thank you. May i ask how about E05c error?

[@zymzymzym]

I followed this video with my G3520 and it is not working, even sucking it well and being very careful with the syringe. In G3520, the pipe is not being lock by the device as you tilt the ink cover, kaya nagbabackflow. Baka masira lang ang device and magkabutas ang pipe pag pinilit pa. Mga bossing, I highly recommend to just use the "Flush Ink" under "Maintenance Settings". Just flush either the Black or All Colors, safe pa siya and nafix ang issue ko within just 3 minutes. Yun lang, around 10% ng ink ang nagamit, for me konti lang naman, atleast sure siya at hindi hacky. 👌💯🇵🇭

[@ralphchristianrivera3698]

Helped a lot. Thanks for this very informative and helpful video. Kudos

[@INKfinite]

You're welcome!

[@BulbaHD1]

Świetny poradnik. Dziękuję.

[@amordejesus8575]

very informative thanks for sharing po

[@INKfinite]

Thank you too

[@gEraLd-b9e]

ask lang boss, same lang ba ang printer heads ng mga GSeries

[@MOTOVLOG1784]

Salamat sir! 😊❤

[@nayomiliwag1352]

Thank you so much!!! big help talaga!

[@INKfinite]

You're welcome 😊

[@shadowtactition2420]

Any idea what diamaeter that syringe was. Im trying to buy one in amazone that will fit wihtout hacing to cut it

[@jonnelalibay6828]

Salamat po sa tutorial hehehe nagamit ko din ito at effective talaga! 🙏

[@juliusestanislao1649]

salamat po.may natutunan na nmn ako

[@dr.barunsarkar6158]

thank you from INDIA

[@juhiwadhwani1998]

Hi can you show how to empty the ink from the printer and fill fresh new ink?

[@JimmB-u6i]

What did you do to keep the ink from backflowing back to the tanks? I didn't understand what you are saying, and understood using the syringe to pull the ink into the tubes, but no following what you did to prevent the ink from backflowing. Thanks

[@laughteristhebestmedicine821]

Me too I didn't understand how he prevented it from backflowing but I saw him opening blue lid before removing a syringe then it didn't backflow

[@svmcomputersolutions4827]

I would like take all videos of u about all printers how many printers details u can provide?

[@INKfinite]

Taking our video and re-uploading it to KZbin or other social media site is strictly prohibited. If found guilty, you'll get copyright claims for doing it! You are NOT allowed to take any videos from this channel

[@alexandrapepino3521]

@@INKfinite sir tanong ko lng pwedi b akong gumamit ng ink n hindi brand ng canon

[@KELLYCOLEENCONTRERAS]

Maraming salamat po

[@emjhaysmusic1870]

Thank you master❤❤

[@INKfinite]

No problem 😊

[@anyeventballoons488]

hello po. nakita ko po yun vedio nyo sa youtube. sana po may vedio din po kayu panu ayusin ang canon g1020 error code 5100. palagi po ganyan. 2 or 3 pages palang po na piprint. error na po kaagad.

[@ThirunelveliBala]

Really Semma use for myself. Thank You Brother. God Bless You.

[@INKfinite]

You're welcome! Consider subscribing to our channel to get you updated 🙂

[@hectorevite-le9tm]

Thank you po Sir.

[@balmagno3983]

Good morning Master, napanood kona po yang trouble shooting video demo mo, at ianapply ko sa g4770 with individual cmyk ink lock, pero pag tinatanggal ko ang syringe nag ba back flow pa din, Iba po ba ang pag aalis ng bubbles sa g470? Salamat po sa technical advice.

[@joseiiantoniob.948]

Hi sir, yung gi-790 ink ba pwedeng gamitin as substitute sa gi-490 ink?, wala kase mabilhan na gi-490 dito sa Pilipinas para sa aking canon pixma g3415 printer model. Printer bought in Saudi Arabia

[@sharewhatyouloveshamladiaz3451]

Kuya Ilan ml po Yun syringe 💉 na need bilhin SA mercury drug store for this po

[@studioflorist5169]

I have G1000 replacing my old epson L300. I never buy canon again, my L300 was problem free until I retired it. Everytime I want to print with G1000 (once a week approx.) I have to check the ink or clean printer in the utilities software. It is slower btw compare to L300 which I found instantly to print.

[@NishjasGame]

Big help sir ano po ung sukat ng syringes? many thanks more power!

[@lauralara1421]

Hi. I completed all the steps and the ink appears to be on the tubes but it's still not printing right. Any recommendations?

[@godiegenil279]

hello may I ask on what to do with my g2010 yung print nya po e may malalang guhit guhit tas malabo

[@SpicyRoll-m4r]

Sir pwede b sa canon g3010 series yung nd original n ink?

[@annelagriomangwag779]

Thank you, it help me so much being a struggling student🥰🥰

[@INKfinite]

Happy to help!

[@gagsty43]

@inkfinite pwede bang ibalik sa tank yung nahigop na ink galing sa syringes?

[@mariolegaspi681]

Bro. anong size ng SYRINGE ang ginamit mo? Kasi may malaki ang dulo at may maliit.

[@whindeuna1333]

Good eve sir ask ko lang ano kaya ang problem kapag steady lang ang light both black and color sir canon mp237 po ang printer

[@leletgracecastillo7412]

I should have watched this video first, nag ink flush ako..ayun naflush nga ung ink...grabe andami naconsume...huuhuhuh... sir ganyan din po printer ko,, nagbebenta po ba kayo ng pang refill ng Cyan, magenta at Yellow? hm po? @INKfinite

[@XellosMetallium]

I need help locating the waste ink tube so I can route it to a tank.

[@bishanlama7392]

I have pixma g2020 canon printer showing 7800 support code need solution please

[@raketerangnanaytipidrecipe]

Share ko sa anak ko.kasi may ganyan kami

[@INKfinite]

Share it to your friends and family

[@dynamos623]

salamt bro, di mo na ibalik sa original yung printer head, eh tulak ba yun pa kanan sa original na pwesto nya? tpos automatic maglock ba yung puti na na unlock mo?

[@skynarrow3208]

Hi sir. I bought this Canon G2010 printer 2 days ago and I facing an empty ink pipes problem just like in the video...is this normal for a newly bought printer?

[@ermehir]

Ano po naman ang problema na pag nag print canon ts8230 ang black ink po nagkakalat sa side po ng a4 paper

[@aldaleell]

many thanks my dear friend شكرا جزيلا" صديقي العزيز

[@pcnerd5994]

May God bless you.

[@tux.indigo1601]

Thanks a lot!

[@INKfinite]

You're welcome! Consider subscribing to our channel to get you updated

[@jeszademafelis]

Thank you

[@cyberbeetarp1089]

goodmorning sir, tanong kulang po, ano pwd gawin kung matigas naho i push ang power button ng canon g1010? sakanat po

[@joysadi1234]

thanks kuya empty po si magenta sakin. mag aauto lock na po ba sya pag n close ko na lahat dun sa may ink nya and cartrigde? thanks. di na po ba ko magllock dun sa inunlock para maadjust ko po yung hose? g1010 po canon, tnx

[@carmelianbehagan689]

It's working thanks for this video

[@INKfinite]

You're welcome! Stay connected to our channel to get you updated ;)

[@MusicLoverForeverAllGenre]

hello.. can you help me please about my g1010 printer.. brand new xa .sinunonod ko nmn po ang manual ng maayos pero pag dating na po sa Preparing the ink system hndi po nag biblink ,,hndi xa nag poproceed.. kaya ayaw gmana ng printer ..

[@maryjeancepeda4589]

Im done thanks

[@eghtrading7484]

Salam! Thank u brother!

[@INKfinite]

Welcome!

[@amytran1584]

It sucked up when I used the syringe but when I run the printer it’s still not sucking up ink on its own. How do I fix this?

[@chinkyromero111]

Meron po ba kayo about sa G4010 error B202, B203 and B205?

[@atechengshai5630]

thanks po sir

[@andreijacquesarreola8568]

Hi ask lang po G3730 po ang printer ko ,ano po kaya ang posibleng problema kapag nag sstop ang pag xerox? I mean kapag naka 5-7pages ang xinerox nagsstop ang tagal bago ulit mag xerox.

[@williamportails7496]

Excellent video, but my Tagalog is ... NIL ;-) Plenty of useful visual info though. Kindly redo a shorter video in English or add subtitles, that would be really great. Thanks again

[@INKfinite]

Thank you! We'll try to edit the video and make it shorter. The reason the video is too long it's because we explain everything for beginner's to know

[@williamportails7496]

@@INKfinite With the new English subs you just added (very fast thanks) , no need to edit the video: it is perfectly clear and explanatory as it is. In fact, if everybody was as clear and patient as you are, KZbin would be a much better place ;-)

[@jessmorthiele]

Thank you!!!!!

[@INKfinite]

Welcome!

[@TubongBayombongBlogger]

Sir paano mgconvert ng Canon pixma MG4170 to continuous ink? At anu mga mga pyesa na bibili at San mabibili. Need help salamat po sir

[@jhayzone3716]

Ubra ba to sa bagong model g4770 .. Kakabili ko lang po

[@dominicarquelada1686]

Sir. San po mapupunta yung inks po na finaflush nia po?

[@adelortega1063]

Sir, pa video naman tungkol sa pag ang orange light nagbe-blink, printer ko ay canon iP2700, parang ayaw kumagat sa papel for printing. salamat po in advance. God bless.

[@cedisonzorapo9399]

Rhank you sir

[@INKfinite]

You're welcome! Consider subscribing to our channel to get you updated 😉

[@alexandremaximilian1135]

THX

[@angelonaval3908]

Pwede po ba yan tatlong syringe na lang gagamitin para isang angat na lang?

[@mafyeah]

Thank you!!!

[@INKfinite]

You're welcome! Consider subscribing to our channel to get you updated

[@LowSettings]

San po kaya nakakabili mura na absorber pad para sa canon g2000 ser

[@INKfinite]

Try po nila sa shopee or lazada sir pero not sure kung same quality po sila ng orginal from canon

[@roxanneb5112]

Hi. Ano po pinagkaiba nyan if mag ink flush nalang? Iba pa po ba yon? Thank you 😊

[@geronimolagos2362]

GOOD MORNING PO BOSS. May tanong po ako pag nag xerox po o nag print ng document bakit po kulang ng isang kulay. pro pag nag print sa photo paper maganda ang print nya,..

[@maxthirdy3434]

Sir, yung sa case po nung akin, naiInkflush ko po nung una. Dumaloy po yung cmy ink. pero yung black po hindi dumaloy. Pwede ko po bang gawin yung ganyang paghigop po kahit sa black lang? Thankyou po

[@INKfinite]

Yes pwede po since hiwalay naman yung ink tank ng black

[@maxthirdy3434]

@@INKfinite thankyou po sir

[@jameskimani1835]

how do you clear error 5b00 on canon G4400

[@INKfinite]

We also have a video on how to fix error 5b00 on Canon G4400. Just click the video link below kzbin.info/www/bejne/fYGpgZ6jbr6di5I