All in One Headstrap Add-on for Quest & Quest 2 (& ITS FREE...Kinda)

  Рет қаралды 89,249

SteveKnows

SteveKnows

Күн бұрын

Пікірлер: 1 200
@Echo--tz9wy
@Echo--tz9wy 4 жыл бұрын
I would like this and do not own a 3D printer. Trust me the demand will be there
@benbeyer65
@benbeyer65 4 жыл бұрын
Yup
@sk8maniac955
@sk8maniac955 4 жыл бұрын
SAME AF SOMEONE PLEASE PRINT AND SELL THIS TO ME
@ryanmalin
@ryanmalin 4 жыл бұрын
There are companies that will print stuff for you on etsy
@brewhog
@brewhog 4 жыл бұрын
@@ryanmalin A lot of local libraries have 3D printers as well (In the US). Not sure how prevalent this is across the entire country.
@mauriciorojas4914
@mauriciorojas4914 4 жыл бұрын
Same
@KawaiiRazorBlade
@KawaiiRazorBlade 4 жыл бұрын
ive never personally wanted the need for a head strap, but I would 100% buy this if it came into stock
@VoidPetsBack
@VoidPetsBack 4 жыл бұрын
Same.
@calkramerr
@calkramerr 4 жыл бұрын
I need this
@2124pooh
@2124pooh 4 жыл бұрын
Need it
@KawaiiRazorBlade
@KawaiiRazorBlade 4 жыл бұрын
@Ken Mettier he stopped it cuz there wasn’t enough supporters im pretty sure :(
@benjibun8189
@benjibun8189 4 жыл бұрын
The demand is def there, the creator could make some serious bank if they price it right (selling it with fitted pads and added electronics that is)
@benjibun8189
@benjibun8189 4 жыл бұрын
@Magica Fox probably, worlds better than the premium strap at the same price. Makes sense
@benjibun8189
@benjibun8189 4 жыл бұрын
@Sir Soma I’m sure it’s fine, it’s just 2-3 times overpriced. It’s the printer and toner business model in action.
@dankyducky3161
@dankyducky3161 4 жыл бұрын
@Magica Fox they’d make a loss wheb selling it for any lower than 70 bucks
@Sulu2U
@Sulu2U 4 жыл бұрын
@Sir Soma it's honestly pretty good! I actually think it's more comfortable than my deluxe audio strap
@d1v1s1onby0
@d1v1s1onby0 4 жыл бұрын
I've just taken a look at the files and it simply wouldn't be worth trying to produce this for sale - the problem is the print time it would take about 24 hours to produce one and mean you have to sell it for more than you could buy an elite headset for.
@Essex121514
@Essex121514 4 жыл бұрын
That has a very "retro" look to it. Feels like an 80's product. And I LOVE it.
@LemonOfLethargy
@LemonOfLethargy 3 жыл бұрын
yeah, ive noticed that some of boneworks has that vibe to it
@Lifeliver28
@Lifeliver28 4 жыл бұрын
Dude I don’t have a 3d printer and I would LOVE one of these
@office_desk
@office_desk 4 жыл бұрын
lucky I have one ;)
@daveyonthedaily9525
@daveyonthedaily9525 4 жыл бұрын
@@office_desk yooo can I buy one off you?
@office_desk
@office_desk 4 жыл бұрын
@@daveyonthedaily9525 Meh, I have two spools of the plastic so Im assuming thats going to make like idk two only or something but you also need like a cushion and it would take time but yeah sure maybe if I can and If I figure out to then sure.
@office_desk
@office_desk 4 жыл бұрын
no scratch that, idk how much it'll make
@The_oli4
@The_oli4 4 жыл бұрын
@@office_desk one spool of 1 kg would be enough for about 2 straps and it takes between 30 and 40 hours to print depending on your printer and print settings using custom supports makes it even better. (this is all acording to my slicer cura with the recomended settings on thingiverse didn't print it myself yet.)
@stevie552
@stevie552 4 жыл бұрын
Yeah... I need this, kinda sucks that I don’t have access to a 3d printer
@PoofsBloon
@PoofsBloon 4 жыл бұрын
everyone has access to a printer, there are online print services.
@PoofsBloon
@PoofsBloon 4 жыл бұрын
@Ball Cat you clearly didn't understand me. there are online printing services that will print the parts for you. So, yes 3D printers are $200+ and be expensive to own one. It doesn't mean you have to own one to have it printed.
@stevie552
@stevie552 4 жыл бұрын
Well thanks I didn’t know that was a thing.
@oreomodz5197
@oreomodz5197 4 жыл бұрын
@@PoofsBloon you have to own money
@The_oli4
@The_oli4 4 жыл бұрын
Big tip in my country almost all libararys have 3d printers now a days that you can use fairly cheap also there are a few online services etchy is a good place to find them.
@jgkling855
@jgkling855 4 жыл бұрын
Please convince them to sell this! I don’t have a 3D printer but I’d love this
@WhiteRaven___
@WhiteRaven___ 4 жыл бұрын
Just download the stl files and then go to a website or shop that will print the files for you. Not that difficult
@The_oli4
@The_oli4 4 жыл бұрын
@SkullyTheCreator yes easiest place is etsy and then search for 3d printing, but there are other places around the web.
@hern2416
@hern2416 4 жыл бұрын
Don't have a 3d printer and this looks like an amazing add on!
@office_desk
@office_desk 4 жыл бұрын
I have one...
@Mistiguss
@Mistiguss 4 жыл бұрын
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@Gavin-oq5nl
@Gavin-oq5nl 4 жыл бұрын
@@Mistiguss I’m interested. Don’t scam me
@xGhostLink
@xGhostLink 2 жыл бұрын
@@Mistiguss Hey! Did you ever make one of these for yourself? I'm here like a year late and the file has since been taken down so I'm wondering if you'd happen to have it
@chaser1956
@chaser1956 4 жыл бұрын
I just finished printing this Headset, it took 2 1/2 days. It is pretty cool and fits the Quest and Quest 2 really well. The sound is increased incredibly well .
@isabellecruz7021
@isabellecruz7021 3 жыл бұрын
Hey! Do you mind sharing the stl files to me?
@chaser1956
@chaser1956 3 жыл бұрын
@@isabellecruz7021 You can download it from Thingaverse...
@diamondx224
@diamondx224 Жыл бұрын
Please share the file!
@NiqHowie
@NiqHowie 4 жыл бұрын
I need one!!! The fact they’re offering the print files for free makes me want to buy it from them! Let’s bless this genius
@Mistiguss
@Mistiguss 4 жыл бұрын
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@lionsden9945
@lionsden9945 4 жыл бұрын
yes i need one too
@Taijifufu
@Taijifufu 4 жыл бұрын
Even the antenna isn't just for show, it's for cleaning the lenses. Ugh this thing is so awesome.
@Motorboot-Hoedan
@Motorboot-Hoedan 4 жыл бұрын
Gonna print this now. About 20 hours of printing time for the headstrap itself. Can't wait to see it all finished tomorrow ;)
@Michael-The-Composer
@Michael-The-Composer 4 жыл бұрын
Just got here. Have u finished printing it yet?
@Mr.camaron8
@Mr.camaron8 4 жыл бұрын
It failed didn't it?
@Motorboot-Hoedan
@Motorboot-Hoedan 4 жыл бұрын
The print failed because it was a hair to large for my Ender 3Pro. But, I splitted the maze in 2, and printed it in 2 pieces. Left half is ready, right half is printing now. Should be ready in 5 hours ! If somebody knows a place where I can put pictures of it, let me know.
@Michael-The-Composer
@Michael-The-Composer 4 жыл бұрын
@@Motorboot-Hoedan yeah put a picture on r/OculusQuest, on Reddit. Then reply to this with the link.
@Mr.camaron8
@Mr.camaron8 4 жыл бұрын
@@Motorboot-Hoedan Ender 3 gr8 machine. Imgur and post the link
@paudiaz4660
@paudiaz4660 4 жыл бұрын
I have a small 3d printing business so I'll definitelly print one of these for my quest 2.
@leongregorio
@leongregorio 4 жыл бұрын
How much will you charge one fr? I’m interested
@paudiaz4660
@paudiaz4660 4 жыл бұрын
@@leongregorio well I put the files in the software out of curiosity and it would be expensive. It's like 10€ in material plus 20€ for the printing time, and that doesn't include any post process like sanding or painting (which is not really necessary tbh). I still have to actually print and see how it really is.
@Motorboot-Hoedan
@Motorboot-Hoedan 4 жыл бұрын
@@paudiaz4660 I am printing one at this moment. Had to split it in two (Ender 3Pro) because it was a bit to big for my buildplate. Materialcost .. about 2 dollar. Time .. 23 hours (but, it's not like you have to hold the printer when it is printing .. just go to bed, and when you wake up it's ready)
@michaelramos4482
@michaelramos4482 4 жыл бұрын
@@Motorboot-Hoedan I actually have the same printer and was able to print it in one piece, I did however have to adjust where it sat quite a few times before it was actually centered properly to be able to print. After I did however, it came out great
@paudiaz4660
@paudiaz4660 4 жыл бұрын
@@Motorboot-Hoedan 2 dollars? How many grams of material do you use? Also, It's 13 hours for me, are using the settings that the creator suggests?
@GridDweller77
@GridDweller77 4 жыл бұрын
FINALLY! *SLAPS TABLE AGRESSIVELY* THANK YOU! I have been waiting for somebody to design something like this so I don't have to spend a stupid amount on the elite strap.
@martinomovies
@martinomovies 4 жыл бұрын
Ear muffs! Last night I was watching the Cirque du Soleil and I cupped my hands around my ears and the sound was so much better!
@BaritoneUkeBeast4Life
@BaritoneUkeBeast4Life 4 жыл бұрын
SteveKnows, thanks for being the 1st VR content provider on KZbin to finally address the HUGE frustrating power bank issue. There doesn’t seem to currently be any power bank/usb-c to usb-c or usb-c to usb-a cables combinations that work to allow charging while you play on the Quest 2. No one on Reddit or elsewhere online has a solution yet. Hopefully this is something Oculus/ Facebook fixes in an update very soon. Being limited to only 2.5 hours at a time in VR is extremely disappointing after being used to staying in VR for well over 6 hours using the same 20000 power bank you show here in your video.
@benjaminmv5950
@benjaminmv5950 4 жыл бұрын
I defintly would want one of those but i don’t have a 3D printer Edit: didn’t expect that many likes (50 at the time)
@imanangelO7
@imanangelO7 4 жыл бұрын
Same
@azred9618
@azred9618 4 жыл бұрын
Same
@VincentBourbeau
@VincentBourbeau 4 жыл бұрын
Same here
@Angelifox
@Angelifox 4 жыл бұрын
same
@SeekMVS
@SeekMVS 4 жыл бұрын
Same
@PeterDenTV
@PeterDenTV 4 жыл бұрын
Wow this thing is cool!!! It's always nice to see my name in the patreon section! Good video, Steve!
@SteveKnows
@SteveKnows 4 жыл бұрын
@PeterDenTV
@PeterDenTV 4 жыл бұрын
@@SteveKnows your content is getting better in each video, totally worth it 👍
@greg5756
@greg5756 4 жыл бұрын
Man I would love this for my new quest 2 I would for sure buy it if it was available. It has great aesthetic and practicality!
@Cloudman572
@Cloudman572 4 жыл бұрын
You would surely buy it without knowing the price?
@greg5756
@greg5756 4 жыл бұрын
@@Cloudman572 Cmon man if it was something ridiculous like 20 thousand dollars of course I wouldn't buy it but if was reasonably priced, sure.
@Mrhighguy206
@Mrhighguy206 4 жыл бұрын
I haven't had a problem with the Oculus Quest 2 charging from my power banks. I use Anker power banks and wires that are double threaded . My power banks are the 20100 and the 26800. They work awesome and have always kept my headsets charged without either of them running down while playing. Even when I only have 4% battery life on either headset. Thanks for your great work work Steve, keep it up and happy gaming.
@RyoCanCan
@RyoCanCan 3 жыл бұрын
The quest 2 is such a hit that getting a company to make these using injection molding might actually be viable. Maybe even insert some koss porta pro nubs on the inside of the discs
@paulsrivet
@paulsrivet 4 жыл бұрын
@SteveKnows I bought a 2pack Miady 10000mAh batteries on Amazon and they charge my Quest 2. The power cord they come with also has a magnetic usb-c plug, so it makes for a very handy device. Also make sure you're using the correct plug out as some come with 2 USB plugs but one is a lower output. I would also purchase a 3D printed headstrap if it were reasonably priced (maybe they can find an ebayer who will print it for them) - much thanks
@kry3s
@kry3s 4 жыл бұрын
Add one more to the “I want this to be in production”
@FEBRIZIOtv
@FEBRIZIOtv 4 жыл бұрын
I bought a 3d printer because of this. It is printing as we speak. 24 hours... 20 dollar spindle of filament, and entirely worth it to me.
@domherrera5026
@domherrera5026 4 жыл бұрын
Steve how did it compare to the elite strap? Would like to see an add on that incorporates the elite strap as well for those who have already purchased it.
@PoofsBloon
@PoofsBloon 4 жыл бұрын
it is only held on with velcro and is not as comfortable.
@oreomodz5197
@oreomodz5197 4 жыл бұрын
@@PoofsBloon I have both way better
@PoofsBloon
@PoofsBloon 4 жыл бұрын
@@oreomodz5197 I guess it depends on the head shape for comfort. For me the print digs into my neck sometimes.
@MrOsmodeus
@MrOsmodeus 4 жыл бұрын
My power brick didn't seem to work on the usbc output but the usb3 port was fine. Romoss 18w 30000. Catch is its over half a kilo of power
@vrbird5538
@vrbird5538 4 жыл бұрын
If more comfortable the strap would be awesome but if you get the elite strap so there is comfortably then switch to elite charging strap when it is dyeing I plan on testing this
@halomaster6275
@halomaster6275 4 жыл бұрын
Set the store up man right now! No joke Steve the hype is even more real now!!
@brendanashton-collins580
@brendanashton-collins580 4 жыл бұрын
"I would like this and do not own a 3D printer. Trust me the demand will be there" *Echo-5555 * I agree with this man!!!!!!!!!!!
@garrettpike7850
@garrettpike7850 4 жыл бұрын
I've been seeing posts of the Elite Headstrap breaking and this was the first thing I saw as an alternative.. TAKE MY MONEY! I'LL BUY 2 JUST TO SUPPORT THE DUDE THAT MADE IT. There is plenty of opportunity for him here.
@Xeylo
@Xeylo 4 жыл бұрын
i dont have a 3d printer and a quest 2, nor the interest to buy one if ill ever have a quest 2, because im cheap, but it looks really good and cool so i hope it goes on market :D
@stefanheston3785
@stefanheston3785 4 жыл бұрын
Regarding cabling, there's an Anker cable mentioned on the Oculus Link support page that's USBC to USB3 A. I saw a review mentioning it from Mike on VR Oasis (there's also an extender if you want to use it for Link, can get a 26ft total length combining them for cheaper than the official Link cable, which is USBC direct) and it does charge the headset, albeit slower than the official cable according to the review. I picked the cable and extender via Amazon and can get roughly 3 hrs play via Oculus Link with my Quest 2 using them. They have 3ft, 6ft, and 10ft options. You should be able to find it on Amazon by searching for Anker Powerline Oculus for the main cable and CableCreation Active USB extension for the extender if you wanted to have the extra length for Oculus Link use.
@BlessedBread
@BlessedBread 4 жыл бұрын
Darn, I got my quest 2 not too long ago and see this but I don't have a 3d printer. It just looks futuristic, I need to get this this somehow.
@Anipixelz
@Anipixelz 4 жыл бұрын
Just to vouch for the ear muffs incase people think they are meaningless, take your rift s, quest 1, quest 2 and while listening to music put your hands over the speaker and cup it. That improvement is just from your hands, muffs like this will improve audio lots.
@Disatiere
@Disatiere 4 жыл бұрын
"but you cant really see what you are doing" Passthrough.
@dickymain8604
@dickymain8604 4 жыл бұрын
Honestly the hardest part about selling is printing and putting together the headstraps in a timely manner. I printed 3 off so far for my friends and I and not only was it costly but it took 2 days to get them ready since we have other things to do as well. We're tweaking the design to make it fit nicer and print faster, but I'd hate to sell the original makers product without his permission. If people are interested comment and I'll make a list to see about using my friend's printer farm to make these instead of the VR gun adapters! :) P.s- I have contacted the original designer and he has given me permission to do this!
@csporto2332
@csporto2332 4 жыл бұрын
plz. You could do this and headset adapters for like halo straps. Id buy the hell out of this.
@dickymain8604
@dickymain8604 4 жыл бұрын
@@csporto2332 well currently we print and sell those other adapters locally, but are looking to expand. Once I have enough responses I can look into starting up, and on top of that I have permission from the Original designer!
@Ygnkamii
@Ygnkamii 4 жыл бұрын
The person that’s going to 3D print these and sell them, HIT ME UP!!
@Mistiguss
@Mistiguss 4 жыл бұрын
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@Metalbetrayal
@Metalbetrayal 4 жыл бұрын
@@Mistiguss I want one, let me know
@andrewrodrigue14
@andrewrodrigue14 3 жыл бұрын
@@Mistiguss I would be interested
@JoesZone
@JoesZone 4 жыл бұрын
Such a cool mod, well thought out. It's crazy how imaginative the VR/Quest community is. I love the cyberpunk aesthetic. Definitely looks better on the OG Quest
@lassehl
@lassehl 4 жыл бұрын
DAMN! This thing is so soo much better then I expected WOW! Im really sad dmthi because: 1. I don't have a 3d printet 2. I live in Denmark so it would probably be very very VERY expensive for me to buy. So yeah if you could reach out for them to start doing it again please do it
@drew899
@drew899 4 жыл бұрын
Hey dude I’ve got a printer. If you are interested in buying one I’d be willing to sell you the 3D printed shell.
@williamknight2433
@williamknight2433 3 жыл бұрын
If you don't have a 3d printer at home, look for a nearby fab lab, it's basically a workshop that has 3d printers, lazers etc. They can vary in prices (the one I've been to is about 10 bucks for a 1 hour print) You'll be shocked at how many their are. I found one in my town and I live in a lost place in the middle of nowhere.
@Greeny5051
@Greeny5051 4 жыл бұрын
I love how it brings a kind of retro vibe to the Quest
@SeageSpeaks
@SeageSpeaks 4 жыл бұрын
I noticed when i have my headset on, it stops charging with my battery pack, but when i put it up and it pauses, then it begins to charge. Which is total bullshit, btw. I feel like this is a "feature" to incentivize people to buy the official battery pack/elite strap, that needs to be sideloaded away.
@bazookasniper5167
@bazookasniper5167 4 жыл бұрын
I bought a brand new power bank and the quest 2 rarely recognises it. Idk why
@SeageSpeaks
@SeageSpeaks 4 жыл бұрын
@@bazookasniper5167 same. The one with usbc and 3.0. I also tried my old one And if doesn't work.
@andyveale
@andyveale 4 жыл бұрын
@Jenn Ro What power bank do you have success with? I'm just about to order one for my Quest2.
@andyveale
@andyveale 4 жыл бұрын
@Jenn Ro Thank you
@grasshoppergoat
@grasshoppergoat 4 жыл бұрын
Have you made sure the battery pack pushes enough power to keep it charging under higher load?
@williamknight2433
@williamknight2433 3 жыл бұрын
If you don't have a 3d printer at home, look for a nearby fab lab, it's basically a workshop that has 3d printers, lazers etc. They can vary in prices (the one I've been to is about 10 bucks for a 1 hour print) You'll be shocked at how many their are. I found one in my town and I live in a lost place in the middle of nowhere.
@BootlegHuman
@BootlegHuman 3 жыл бұрын
the files are gone but after researching i found a reddit post by someone who had split the files to print on smaller printers this also includes the original files too drive.google.com/drive/folders/148pTwyLZrzAQnBExGxqTjYCEbqyMCleU www.reddit.com/r/OculusQuest/comments/ji28eg/boneworks_oculus_quest_2_strap_split_in_3_parts/
@BootlegHuman
@BootlegHuman 3 жыл бұрын
and yes i did like my own comment to try and help boost it to get to the top so other users will see this and not have to search the internet like i did
@BootlegHuman
@BootlegHuman 3 жыл бұрын
if you see this comment give it a thumbs up to help other users who check the comments see it without having to filter to new
@BootlegHuman
@BootlegHuman 3 жыл бұрын
you will need 3d builder (free on microsoft store)to split the side files for printers with a smaller bed size like the ender 3 as the side files seem to be put together rather than split into left and right, this is easy to do and takes less than 5 minutes to split into two separate files (the back panel is fine) the rest of the files such as the antenna and battery pack are in the original files folder
@The_oli4
@The_oli4 3 жыл бұрын
Thanks you sir are a legend mine broke and i deleted the files now i can reprint it
@BootlegHuman
@BootlegHuman 3 жыл бұрын
@@The_oli4 👆👉
@Mistiguss
@Mistiguss 4 жыл бұрын
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@AndyLeeVlogs
@AndyLeeVlogs 4 жыл бұрын
If you don't own a 3D printer, send the files to a 3D printing company to do it for you, then they will ship it to you
@WxckyPenguin
@WxckyPenguin 3 жыл бұрын
How?
@AndyLeeVlogs
@AndyLeeVlogs 3 жыл бұрын
@@WxckyPenguin when the company gets the files they just print it out on their printing beds, then they will pack it and ship it to you
@MadMaxBLD
@MadMaxBLD 4 жыл бұрын
"Do you guys not have 3D printers?" :D It looks pretty cool, kinda like a Swiss Army Headstrap.
@eamonnmcmahon9005
@eamonnmcmahon9005 4 жыл бұрын
I would love one I hope that he decides to sell them again but could I get one for the original quest
@Mistiguss
@Mistiguss 4 жыл бұрын
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@Kiltem
@Kiltem 4 жыл бұрын
I'm using a power bank in my back pocket on the Oculus Quest 2, and I've noticed that it won't charge, but it will discharge exponentially slower. Where without, 1% is 1%, with the battery its more like 5% is 1%. So, just a bigger battery and place to power from, but not charge off of. It will charge when not playing off of the bank, however. But during play, it just 'expands' the size of your current battery, in a way.
@Iteration_Ashton
@Iteration_Ashton 3 жыл бұрын
I tried the link and it takes you to a 404 page. Does anyone know what ever happened to this? Is there still an stl for it (or something similar) around? I tried a few sites (thingverse, yeggi, cults) and none of them had anything like this. If he took it down to start selling them, where can I get one?
@Hacker-cw9lc
@Hacker-cw9lc 3 жыл бұрын
i have a link a reupload, if you still want it lmk
@raybang9891
@raybang9891 3 жыл бұрын
@@Hacker-cw9lc Hi! thanks for proposing! can you provide me the link, please?
@musicvr3368
@musicvr3368 3 жыл бұрын
@@Hacker-cw9lc Send pls
@muaythaiswe
@muaythaiswe 3 жыл бұрын
I would also like a link, this looks perfect 🙂
@Iteration_Ashton
@Iteration_Ashton 3 жыл бұрын
@@Hacker-cw9lc sorry for the late reply, I seem to have missed the notification. If you are willing to share the link that would be very much appreciated!
@Ben-xw2ei
@Ben-xw2ei 4 жыл бұрын
I game with a powerbank USB C to USB C (15W as max output), using the included USB C cable with the headset. Works perfect (charging more then what the headset consumes) :)
@crazywyvern4704
@crazywyvern4704 4 жыл бұрын
I want one but don’t have a 3D printer
@Mistiguss
@Mistiguss 4 жыл бұрын
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@edenlee5396
@edenlee5396 4 жыл бұрын
I would really love to have this, but I don’t have a 3D printer. THE DEMAND IS HERE.
@dastandardgaming2948
@dastandardgaming2948 4 жыл бұрын
I need one! Make them for sale!
@Cloudman572
@Cloudman572 4 жыл бұрын
So you would definitely buy this without any idea how much it costs?
@dastandardgaming2948
@dastandardgaming2948 4 жыл бұрын
@@Cloudman572 100%
@Cloudman572
@Cloudman572 4 жыл бұрын
@@dastandardgaming2948 Twat.
@dastandardgaming2948
@dastandardgaming2948 4 жыл бұрын
@@Cloudman572 lol
@kurisu7885
@kurisu7885 4 жыл бұрын
I do have a 3D printer but it's down and my brother is taking his sweet time fixing it, but this looks like a great addon for the Quest. Makes it look even more cyberpunky.
@Mistiguss
@Mistiguss 4 жыл бұрын
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@Eman0807
@Eman0807 4 жыл бұрын
First lets go!!!!
@kvxpe0
@kvxpe0 4 жыл бұрын
nobody cares
@ilan_kayesar
@ilan_kayesar 4 жыл бұрын
shush
@smore8671
@smore8671 4 жыл бұрын
Ayyyyyyy lets go i found the first useless comment of the day
@Eman0807
@Eman0807 4 жыл бұрын
@@kvxpe0 Nobody Asked
@kvxpe0
@kvxpe0 4 жыл бұрын
@@Eman0807 thats right, nobody asked about that u are first
@jackattack1630
@jackattack1630 4 жыл бұрын
It looks better then the elite strap in my opinion. Definitely going to find a friend with a 3D printer
@mri3079
@mri3079 4 жыл бұрын
BRUH WHY WOULD U STOP MAKING IT THE AVERAGE PERSON DOES NOT HAVE A 3D PRINTER ON TOP OF THAT THE CREATOR WOULD BE RICH ASF
@Cloudman572
@Cloudman572 4 жыл бұрын
How much are you willing to pay- with postage it would probably be same price as elite strap- do you still want it then? The creator would not make much money as they would have to buy a 3D printer farm or print only about 5 a week. 3D printing is poor on price for large quantites vs mass production- its only really good for prototyping where the price is less important than getting a test piece or for premium price items that individuals really want. Take a look at Shapeways prices.
@DiamondDepthYT
@DiamondDepthYT 3 жыл бұрын
just fond someone on etsy who will 3d print stuff for me! Can't wait to 3d print this and use it, this will be a life changer (and yes, i do still have the files). If I get this 3d printed, and use it with the Quest 2 Grey Silicone VR Cover, I'll probably end up paying like $60-$70 and get the absolute best outta my headset. Thanks Steve!!
@pyroblaze13
@pyroblaze13 4 жыл бұрын
Steve, Videos Of 3D Printed Accessories Such as this Strap are Always Great. Thank You for Informing us
@HowHigh_Juana
@HowHigh_Juana 4 жыл бұрын
Definitely would want to buy. And a battery compartment would be cool because I can change my batteries blindfold now since having the quest.
@rickburk8441
@rickburk8441 4 жыл бұрын
I would absolutely purchase several of these! It honestly looks sooo much better than anything I've looked at before. Function + form for the win!
@speedyMaldo
@speedyMaldo 4 жыл бұрын
I have an off brand 20000 MaH backup battery with PD and I used a random USB C to USB C cable. It charged my headset while I played. It may be that the A to C transition isn't working, or that the battery bank needs to support Power Delivery. Either way, it works for me.
@Unclaimed_Username
@Unclaimed_Username 4 жыл бұрын
Don't have a 3d Printer but I both would like a strap enhancement as well as more bulky technology.
@chasz3776
@chasz3776 4 жыл бұрын
For people that don't have a 3d printer, check your public library or art gallery... some of them have Makerspaces now and will have one or more printers you can use for a minimal fee.
@FEBRIZIOtv
@FEBRIZIOtv 4 жыл бұрын
If anyone wants to purchase one, I will print a select few for sale. But, it costs an entire 20 dollar spindle of filament and then you have to pay for the effort and the shipping, so I am not certain it would be feasible for anyone on a budget.
@pubplays368
@pubplays368 4 жыл бұрын
How many are you making? Would $60+ shipping work?
@iiianydayiii
@iiianydayiii 4 жыл бұрын
I own a fairly well dialed in Ender 3 and this barely (but does) fits in the build area if oriented vertically. The problem is, the head strap body alone would take more than two days to print. I just loaded this into Prusaslicer to verify.
@NappyWayz
@NappyWayz 4 жыл бұрын
That head strap is AWESOME!
@wolveraza9896
@wolveraza9896 4 жыл бұрын
PLEASE MAKE MORE !!!!!!!! It has EVERYTHING that is missing form all the others in ONE STRAP!!!!! PLEASE GET HIM TO MAKE MORE !!!!
@RhysDaKingVR
@RhysDaKingVR 4 жыл бұрын
haha that's kinda awesome man not sure i'd use it on the daily but still very cool. grate video Steve
@lucasvanmessem9486
@lucasvanmessem9486 4 жыл бұрын
I DEFINATLY WOULD BUY THIS. I think the demand will be there
@Cloudman572
@Cloudman572 4 жыл бұрын
So you would definitely buy this without any idea how much it costs? Guess that is true of the mentality of people with no idea where the caps lock key is.
@lucasvanmessem9486
@lucasvanmessem9486 4 жыл бұрын
@@Cloudman572 ... i don't need your opinion thanks also i of course would consider the price but i don't think someone who judge people on youtube based on if they use capslock would understand.
@Cloudman572
@Cloudman572 4 жыл бұрын
@@lucasvanmessem9486 Twat
@ghost23smith91
@ghost23smith91 4 жыл бұрын
Definitely need this, I think the demand is definitely here
@patrick8414
@patrick8414 4 жыл бұрын
Use an anchor usb A to usb C oculus cord. Idk if that’s the exact name but Ik they make them because I own one of them and it works flawlessly. It’s about 10 feet long I think
@gordyguyworld7164
@gordyguyworld7164 4 жыл бұрын
I don’t have a 3D printer and would like one too. I really hope they would start making these Quests caps
@doge8676
@doge8676 3 жыл бұрын
Pretty cool. I like the sound enhancers.
@abdullahabohana9068
@abdullahabohana9068 4 жыл бұрын
I don't have access to a 3d printer and I would absolutely LOVE this
@drewby4701
@drewby4701 4 жыл бұрын
This is so righteous!!!! Big motivation for me to finish building my 3D printer
@MickeyDee420
@MickeyDee420 4 жыл бұрын
All the support that people are giving Facebook and the lack of competition preventing the company checking themselves ethically is actually scary
@vyatranto
@vyatranto 4 жыл бұрын
I put it in Cura and the head strap (only, exclude antennae, battery holder, and clip) will take about 260g of PLA and 1d 4hr of printing time. Tarantula Pro, 20% infill, 0.2mm layer height, 0.5mm brim, 50mm/s speed (could be faster), 235x235x250. Material itself cost about A$13. Electricity cost A$0.262026/kWh in Western Australia (Synergy). Let's say average 3d printer electricity consumption is about 50W/h. it will take 50W x 28hr : 1000 = 1.4kWh xA$0.262026 = A$0.3668364 (less than A$1). Total cost will be about A$14 per print. Exclude effort for cleaning up the support materials and finishing touch. The 3D model needs to be adjusted to 45deg angle (diagonally) so it will fit the printing bed. I will try to print it and see how it goes. Be back in few days.
@vyatranto
@vyatranto 4 жыл бұрын
I did it in one go! 28 hours! Despite of the support materials to clean up and some finishing jobs (sanding, painting, etc), it works!
@EKUL34
@EKUL34 4 жыл бұрын
@@vyatranto Did you try it on a quest 1 or quest 2? comments on thingiverse had people printing it and saying the angle of the connectors needed to be changed to fit the quest 2
@pengiiwin3502
@pengiiwin3502 3 жыл бұрын
i think everyone would like one, the demand is definitely there
@thepsgamers963
@thepsgamers963 4 жыл бұрын
I don’t know how expensive is to make something on a 3D printer but if it’s cheap enough I would like to buy one for sure, pretty cool!
@no_name9165
@no_name9165 4 жыл бұрын
O man I'm going to get home and print this thing! Good find and thanks for talking about it!
@jacoblefebvre6411
@jacoblefebvre6411 4 жыл бұрын
i would LOVE this headstrap, ive been looking for one for my occulus 2 but i dont have a 3d printer to make it, and it would be AMAZING to have one of these
@Grimtton
@Grimtton 4 жыл бұрын
I would 100% buy this for my quest 1
@FEBRIZIOtv
@FEBRIZIOtv 4 жыл бұрын
I printed this and it's not snug. It's a bit loose on the quest 2. Next one I make I will scale down 3%
@malenskii2641
@malenskii2641 4 жыл бұрын
If adjustments are made for quest 2 I will buy one
@chrisgmdy
@chrisgmdy 2 жыл бұрын
This actually looks awesome!
@cykagaming365
@cykagaming365 4 жыл бұрын
I don't own a 3D printer and this invention intrigues me
@cmnidit4444
@cmnidit4444 4 жыл бұрын
My solution woth the battery pack was using the official cable that came with the headset since the one i bought can use usb c
@skylerrussell645
@skylerrussell645 4 жыл бұрын
The demand is definitely there, I would absolutely get one
@Mistiguss
@Mistiguss 4 жыл бұрын
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@The_Jomonge
@The_Jomonge 4 жыл бұрын
So glad this works with the quest1 too and the strap to hold a battery bank is just what I need, but I don't have a 3d printer...hmmmm?🤔
@asherbotvin3122
@asherbotvin3122 4 жыл бұрын
These are AMAZING! I’ve been wanting the built in headphones and this would be great.
@corrtteezz
@corrtteezz 3 жыл бұрын
The demand is definitely gonna be there
@HenryWoods
@HenryWoods 4 жыл бұрын
Yes please!!! I am definitely interested in purchasing this for my Quest 2!!
@Mistiguss
@Mistiguss 4 жыл бұрын
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@Shamoun2
@Shamoun2 4 жыл бұрын
I don’t have a 3D printer and would really like that. Cause that just looks insane
@bluedevil678
@bluedevil678 4 жыл бұрын
Great video! Would love to see more 3D printed items for the Quest 1& 2
@flufnug
@flufnug 4 жыл бұрын
Yes I would definitely want one for my quest 2! This is awesome!!
@Mistiguss
@Mistiguss 4 жыл бұрын
FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!
@supercat82b20
@supercat82b20 4 жыл бұрын
Yes please get him back in business I would 100 percent buy this for my quest 2
@calebblake1294
@calebblake1294 4 жыл бұрын
I would definately buy it. I havent bought a quest headstrap yet because i find its just not worth it, but this does waaay more than any other strap. I'd say the demand is definately there, if people find out about it
@CarloBerroa
@CarloBerroa 4 жыл бұрын
hell yeah the the demand is there! I don't want have to go out and get a 3d printer just to make this.
@Joseph-oo7pp
@Joseph-oo7pp 4 жыл бұрын
Man, if they decide to start selling this, I will get one, especially if it is close to, or cheaper than the elite headstrap
@valient_wolf8484
@valient_wolf8484 4 жыл бұрын
I would definitely like this. But don’t have a 3D printer but really this would be amazing
@Gavin-oq5nl
@Gavin-oq5nl 4 жыл бұрын
If anyone wants to make the charging cable look sleek look up “usb c make to female elbow” something like that it’s a 90 degree elbow and it makes it feel way better.
The Best Oculus Quest 2 Headstrap & it won't BREAK!
10:57
SteveKnows
Рет қаралды 108 М.
GearHead Strap
17:20
Adam & Evil
Рет қаралды 21 М.
amazing#devil #lilith #funny #shorts
00:15
Devil Lilith
Рет қаралды 18 МЛН
PRANK😂 rate Mark’s kick 1-10 🤕
00:14
Diana Belitskay
Рет қаралды 8 МЛН
小路飞还不知道他把路飞给擦没有了 #路飞#海贼王
00:32
路飞与唐舞桐
Рет қаралды 76 МЛН
You Can Now Bring Your Real Keyboard In VR & It's Awesome!
14:25
Cas and Chary XR
Рет қаралды 315 М.
VR Newbie Tries EVERY OCULUS QUEST 2 Head Strap
12:40
JayBratt
Рет қаралды 363 М.
Adicop Oculus Quest 2 Head Strap + Battery | REVIEW
7:36
Nicktechno
Рет қаралды 1,3 М.
NO Quest 2 Strap will Beat this. So I'm DONE Reviewing them!
7:14
Oculus Quest 2 Tips & Tricks You NEED To Know
15:10
Virtual Reality Oasis
Рет қаралды 1,8 МЛН
Halo Strap for Oculus Quest - Is it worth Buying?
9:19
WIll Habit
Рет қаралды 12 М.