All New DreamStation 2 Auto CPAP - Review and Demo

[@barrymonteiro8893]

Excellent video. Thank you very much. I received my new DS2 after using a Dreamstation 1 for 5 years. I was plesantly surprised by the performance of the Dreamstation 2. The design of the reservoir and the fact that you can't open the reservoir without removing it is a big step backwards. Other than that it's ok. Wish they had just sent out Dreamstation 1 replacements without the foam though.

[@CPAPmyway]

I am glad that the experience has been good on the DreamStation 2 so far. Thank you for the input.

[@joancopman6102]

Agree, opening that reservoir is a annoying. Have to turn machine completely around so as not to break it.

[@Stardustparadise418]

I received the revised version of DreamStation 1. So happy I didn’t get the new one. Love the 1, also looks like a proper medical machine.

[@barrymonteiro8893]

@@Stardustparadise418 I agree. I'm still planning on replacing my 1's chamber with a foamless one so I can start using it again. 👍🏻

[@RN-hx1rs]

Yeah I don't get why people are complaining, I find it easier to use during sleep than the old DS.

[@ephy1973]

Looks like a cheap piece of junk. Also, the touchscreen does not look very responsive. Another big problem, if you opt not to use the humidifier, you still have the footprint of the humidifier making your machine unnecessarily larger. Other than the removal of toxic foam, this looks like a downgrade on DS1.🤨

[@CPAPmyway]

Thanks for the input.

[@andrewberry6546]

Your a barrel of laughs arn't you 😂

[@LayneBurroughs]

I prefer the Dreamstation 1 (DS1). The humidifier tank design is harder to use on the DS2. Harder to get out and more flimsy. Overall the DS2 appears to be more cheaply made. The tube connection angle is fixed. It could be rotated on the DS1. The button is harder to press from your sleeping position. Sometimes it spits water out through the tube (when you fill it up to the line). It often runs out of water by morning (The DS1 also has this problem). It is a little quieter than the DS1. But overall I like the DS1 better. Looks like they rushed the design of the DS2.

[@CPAPmyway]

Thank you for the great input.

[@donnac2420]

I have a VERY hard time getting the water tank in and out of the DS2 😢

[@steveking8548]

And the DS1 allows you to adjust the menus. This video gives the impression it can't be done.

[@dr.pickle5842]

Very unhappy with the DS2, as it is not nearly the machine the DS1 is. Glad that I followed the foam removal instructions on KZbin about 7 months ago, so I could continue using my DS1. After waiting for just over a year for a new one to arrive, a DS2 came. I have tried it & I am going to sell the DS2 on Craigslist. I won't be sending my old DS1 back to Phillips, as they inconvenienced me & Phillips Respironics jeopardized my health by making me wait an unacceptable length of time for a replacement.

[@CPAPmyway]

Sorry to hear that. Thanks for watching.

[@breathingstuff7168]

The system one was designed much better! What were they thinking??? The filters are INSIDE so now there will be dust build up at the intake holes. The touch screen is HORRIBLE, not very responsive at all. Humidifier design is awful, and the machine can’t be operated without it. The tubing connection is on the front and fixed in place unlike the system one which was on top and swiveled. I’m very disappointed

[@glgl1472]

It's really loud this is my first unit I've never used it before it's very loud

[@laurenwade9756]

Agree with your points. I liked being able to NOT use the humidifier if I did not want it and often traveled without it. Now for travelling it is more bulky! There are some better features like the heated tubing, but I am disappointed as well!

[@janicewypasek1371]

Agree with everything. Also, the snap-on lid to the humidifier cannot be separated for cleaning. There is a spring mechanism inside so possibly it's not meant to be separated. But, will bacteria grow on the underside of the lid?

[@barbiekaz4786]

I hate this "upgrade". Waited so long for it, but it

[@incrediblenonsense]

Better than cancer though!

[@randyledbetter3408]

I like the Dreamstation 1. On Dreamstation 2, every breath you take can be heard, the air coming in through the filter holes is not quiet. I like viewing the graph on version 1 to see how much rest that I got when I shut it off. No pre-heat function on version 2. Although it looks nicer, it’s not an upgrade in my opinion! I was forced to take this one due to the recall on the older one. I’m not very happy with this one. Resmed Airsense 10 would be a better choice, outside of the Dreamstation 1.

[@CPAPmyway]

Thank you for the DreamStation 2 cpap feedback.

[@Stardustparadise418]

I’m so glad I received the revised version of the dreamstation 1. It’s so much better and I love the old water tank system.

[@randyledbetter3408]

@@Stardustparadise418 What is the revised version?

[@nancyrenfro1355]

I feel the same way. Not impressed

[@v6monza535]

The Dreamstation 2 just feels like a cheaply made machine.I just got mines and I don't like it

[@robertorosa3531]

Received my DreamStation 2 a few weeks ago. I like the fact that it is smaller and quieter. But...there are a few flaws in its design. The water chamber is a pain in the ass...First of all, it is smaller and after about 7 hours of sleep, it's empty. Filling the chamber is alleyways a mess as water spills always. My biggest disappointment is that with this new machine, I can't use my SoClean (unless there is a way and I haven't figured it out). The previous DreamStation, had the water chamber just below the hose attachment, so the adapter for the SoClean with its small hose could fit right in and do its job, every morning....Now...there is no way that I can see, for the SoClean to be hooked up. Anyway...not really thrilled with it but it works I suppose. Roberto

[@CPAPmyway]

Thanks for the DreamStation 2 input.

[@LayneBurroughs]

The water chamber is not as good as the DS1.

[@alibarron7558]

Basically the Dream Station 2 (black) CPAP Machine is just a cheap made model Phillips is replacing the white Dream Station 1 models with to alleviate judgments against them. The Dream Station 1 machine was robust and hearty and one didn't have to worry about it falling off your bedside table at night. It held a full nights water reserve and had a swivel attached from Phillips. The air volume could be set up to 16 for large and needy people. It was easy to fill and clean. The Dream Station 1 seems to be far superior to the new model but has the toxic foam problem. Here are some of my first impressions of getting the new Dream Station 2 that this commentator is making good comments about. Different people have different needs and wants so really think this over before making your choice. And I hadn't fired the Dream Station 2 before writing the following comments: The biggest problem they did not state is that Phillips new replacement machine, i.e. Dream Station 2, is a much cheaper made machine and any filters and etc. you have will not fit on the new machine. The hoses are smaller diameter and will not be sufficient for large people. The water tank is smaller, so requires frequent filling. There is no swivel fitting so your hose goes straight out, instead of being able to swivel towards your bed. The machine is all black and difficult for us elderly to see in the night. A couple of the hoses and attachments did not come with the new machine.

[@CPAPmyway]

Thanks for the input.

[@stephenbryson7720]

Any recommendations for cleaning. You mentioned in the video top shelf dishwasher safe?

[@jaybarr3307]

I have one of these machines and am brand new to CPAP. Never thought I could tolerate one. At the hospital during an overnight titration test, I felt like I was being waterboarded with air, like I was drowning in it. Thanks to the ramp settings, that is over. Just had my first night with it and went smoothly. My AHI was super low whereas before it was very high, so I guess it's working. Soooo quiet. Wife is delighted. Of the reviews I watched, yours is quite good at explaining various elements. Thanks for that. Was looking for that Flex setting info. Man, the comments are unkind but much of 'em seem very nitpicky. How hard is it to pull out the reservoir? Seemed awfully easy to me but maybe if someone is laden with arthritis it would be a concern. I had no trouble and can put a 16oz bottle of distilled water in the nightstand drawer. The small size means I can take it with me for work travel. Anyway, I just needed a good starter machine and, since I just got thru my first night with success, I'm quite pleased to say the least.

[@CPAPmyway]

Thank you for the feedback. Great to hear that you are doing well on the DreamStation 2. We really like this CPAP.

[@esotericslayer6004]

Any update

[@sandrasharon7415]

Where can you get a 16oz bottle of DISTILLED water?

[@samandahalliburton1809]

It’s almost too light!!! To easy to pull off of nightstand.

[@mxycraig]

Thank you for a very informative video, much more useful than what Philips provides. We just received my husband's recall replacement DS2 a few days ago and have been working through all the instructions etc in order to try it out for the first time tonight. I understand the chief complaint of so many people about the inconvenient humidifier, but am hopeful we can live with that. However, I am wondering about a couple of things related to cleaning the machine, which is my part of the operation. Someone asked about how to clean (or should we be concerned about) the passageway that runs back through the machine from the humidifier to the air outlet port for the tubing. It is indeed much longer than the "passage" on the original Dreamstation. Is there any better answer than "well, if you just clean all the rest of the machine daily as Philips recommends you won't have a problem"? Frankly, we never cleaned the old DS humidifier daily, just weekly with vinegar and distilled water, and never had a problem. I am willing to wash the darn humidifier every day or every other day if necessary. However, this longer passageway does concern me. Any thoughts? Also, the Philips instructions just tell you to wipe off the "humidifier air inlet/outlet seal" daily with a cloth dampened with a little mild cleaning solution. I've tried that already and it's pretty hard to get into the nooks and crannies of that seal while it's in place, so I'm a little worried about how sanitary it will be. I saw one other review on the internet that mentioned removing it to wash but it didn't show how to remove. Do you have any insight on whether this is possible or a good idea? Thanks again for this video, and any thoughts about my questions.

[@CPAPmyway]

Thanks for watching. The only thing that I could potentially recommend would be a tube brush. Link below. But, you still should use any chemicals inside there. The only other option would be a CPAP Ozone Cleaner, but you should use your own judgement to decide if that is a good plan for you. Links to everything below to help. cpapmyway.com/store/cpap-tube-brush cpapmyway.com/blog/use-soclean-cpap

[@OPSteel97]

The only thing I don’t like is that if you don’t use the humidifier, you can’t omit the tank and enjoy the benefit of having a much smaller unit on the nightstand and also the ease of traveling….or am I missing something? Will it work without the tank attached?

[@CPAPmyway]

The Humidifier on the DreamStation 2 is integrated so you must have the chamber in there for now. I am sure that there will be a bypass for it, but it will not change the dimensions at all.

[@debramccord7707]

With the humidifier attached it’s the size of a Buick. I don’t use the humidifier and I want to remove it.

[@cebruthius]

1) It's a fingerprint magnet 2) Can't use it without the bulky reservoir, not travel-friendly 3) Can't open the reservoir without removing it (you also noticed it) 4) Can't re-orient the air port 5) Can't take the SD card out without removing the reservoir 6) More complicated reservoir which is harder to clean 7) Humidifier latch is based on flexing plastic, will crack and snap off at some point 8) Modem cannot be removed / disabled Summary: cost optimized design intended for growth markets (developing economies a.k.a. the third world), not the US or Europe in particular

[@CPAPmyway]

Thanks for the input.

[@breaker1685]

Very good points Ceb - but the presenter said that you could disable the modem via programing (who's right?). In the Dreamstation 1, I just took the modem physically out (don't want radiation going on regular). Hope the new Resmed is an improvement, not a plus and minus features scenario like the new DS2. Truly is a shame Philips as your previous System One and Dreamstation 1 unit were very good and solid anmd looked good - two steps forward and one back

[@gigglybeast]

This does look like a cheap, poorly designed unit - definitely a step backwards from the Dreamstation I, but maybe it won’t give you lung cancer. My next unit won’t be a Philips.

[@aaronh305]

This! Who cares about a smaller hose. So many quality of life steps backwards. I'll wait until my cancerstation 1 is replaced with a Resmed. Good channel but this review was way to kind to PR.

[@Keeper0fmyHEART]

9. Hose is not heated which is a huge step back from modern cough cpaps. 10. DEAL BREAKER, not ADA compliant for the visually impaired/blind. The touch menu is completely inecessable denying privacy for the patient as nothing can be changed or confirmed as correct making the patient dependant to others. 11. DEAL BREAKER, not compatible with OSCAR due to the encryption on the SD card. No idea known if this encryption will be cracked for OSCAR usage. 12. Speaking of the SD card, machine won't work without that original card, the encryption key is on that card, think UEFI from Intell chips, so don't lose it. I'm going to try to see if I can get a refund as this machine is a nogo for me.

[@SamFreedom]

Always wondered why these huge companies didn't have a person like me to tell then what idiots they were BEFORE they ruined their products. I mean seriously, except for the cancer causing foam the DreamStation was pretty cool.

[@breaker1685]

Hi CPAPmw - can u tell me where the air intake area is (I know where the filters are but how does the air get in to the filters?)- it did not seem obvious in your video? Is there another filter on the air intake area also? What new material are they now using for sound abatement material, especially considering it appears much quieter?

[@TheDriver21122001]

On the side...all the little holes.

[@SamFreedom]

Anyone figure out that the black shit around the rubber gasket on the Dreamstation 1 humidifier door was not black mold but the black foam crap that was going into your lungs

[@bmerfy]

Very valuable info, well presented. I appreciate the DreamStation 2 much more after watching your presentation. I agree with the comments that say the unit seems kind of cheaply made. As you mentioned, it would be easy to break off a plastic tab trying to open the reservoir without detaching it. Even the latch on the reservoir lid seems almost designed to be broken.

[@CPAPmyway]

Thanks for the input.

[@debtessier6853]

can the dream station 2 advanced be run without attaching the water tank, also, my SD card from dream station 1 does not seem to fit in the 2 advanced model, by that I mean, when it is inserted in 2 model, it does not seem to stop but continues to go in more than it should and than can hardly be removed

[@CPAPmyway]

The tank will have to be in there, but you can leave it empty and turn the humidity off. As for the SD card. They should be the same size.

[@FenderGibsonWashburn]

Just got mine this week due to the recall. So far it works ok. I like the sleek look but I didn't mind the medical equipment look of the first model, because it is a medical device. Takes up less room on my nightstand. The replacement filters I bought are now useless and the new ones are more expensive. I liked the previous removable water tank. This one is kind of a pain to remove and install. It feels fragile, I'm concerned I'll break it. The touchscreen is somewhat frustrating to use but once you have it set up it's not an issue. It doesn't really matter if I like this one better or not as long as it works.

[@CPAPmyway]

Thank you for the feedback on the DreamStation 2.

[@jonathanparra9082]

Did your dream station 2 have all the features he talked about? I got mine due to the recall as well, but it didn’t come with a lot of the available settings like the ramp, humidity, and flex setting

[@FenderGibsonWashburn]

@@jonathanparra9082 Yes, they are there. It's not obvious where and how to change the settings. Some have sub menus or can only be changed from a certain screen. I had to watch several videos. It doesn't help that the "touch screen" is finicky at best.

[@wiredspeaker5658]

I feel the pressure is inadequate on the 2.

[@RajaniIsa]

@@jonathanparra9082 The Humidity and Heating, at least, are on the screen that pops up when you start therapy.

[@tonybanner2982]

I dont like it, I have the old Philips Respironics. system one 60 series, I thought the Water Chamber was a Bad design hard to clean with the system one 60 then 1st Dream Station it looked like they made Improvements with this vs 2 Dream Station Ill pass they made this machine way to hard to clean and the plastic looks cheap

[@CPAPmyway]

Thanks for the feedback.

[@dh2602]

Thank you. I would be very interested to know how many hours of usage is it until the "reached capacity hours alert/warning indicator comes on? Thank you for the video. I received my DreamStation 2 yesterday and became overwhelmed at trying to set it up. You made it soooo easy. Cannot thank you enough. I almost got frustrated and sent it back. Sooooooo glad I found this video. Having to disassemble the machine to fill up the chamber does not make sense as the little pins in the back are so small and I'm thinking got to be extremely cautious when removing the water chamber and replacing it.

[@CPAPmyway]

Youa re very welcome for the DreamStation 2 Video. Glad that you found it helpful. The usage hours is not something that I have any info on unfortunately. The DreamStation 2 is supposed to last at least 5 years. So hopefully that helps.

[@CyrusLi]

did you have to send back the old CPAP machine?

[@dh2602]

@@CyrusLi yes

[@oldarkie3880]

I don't need the humidifier. i liked the dream station 1 better because you can use it without the water chamber. (much smaller then). I also don't like that the new machine display faces the ceiling. I now must tilt it to see from bed.

[@CPAPmyway]

We have heard that feedback from a number of DreamStation 2 users. Thanks for the input.

[@monicaperez2843]

Fear that it is so light that it could be easily knocked off the nightstand.

[@CPAPmyway]

Good point. I should have pointed out the rubber non skid on the bottom. Definitely not sliding.

[@monicaperez2843]

@@CPAPmyway Thank you for the update!

[@laurareeves11]

One thing that is a pain in the butt on this thing is you have to make sure you pour the water on one side or the other not in the center or else at it’ll end over your counter.

[@CPAPmyway]

Thank for the input.

[@gosman949]

I'll wait for the new ResMed to come out! Anyone know when?

[@julianosterhaus4694]

Resmed provided me with the only CPAP that failed after 3 years of use. Never again!

[@timsparks7049]

I travel extensively and don't use the water chamber or heater. Is there a way to remove the tank from my unit to reduce the footprint? If I take the water tank off it just blows out the back side. The last CPAP would operate without the water tank attached thus making it more compact and easily transportable. Other than lighter weight my old unit had a smaller footprint.

[@CPAPmyway]

You can not remove the humidifier on the DreamStation 2.

[@trob9100]

My first CPap! Right on time🙂 It's super quiet. Still getting to know it.

[@CPAPmyway]

Nice!

[@braddull5376]

After 18 years of C-PAPS, I can actually sleep at night due to how quiet it is. No rushing air sounds. None!

[@CPAPmyway]

Glad to hear that.

[@icedancer64]

I was so pleased at the quieter DS2!

[@davidthilk6762]

Thanks for the video, very helpful. I just got this replacement for my partner. It's my responsibility to set it up. I love the way it looks and the size is great, but filling it with water is a little infuriating (I need to turn on the bright lights and throw on a pair of reading glasses). Yours seems very quiet. Ours is very loud, much louder than the old one.

[@CPAPmyway]

Yeh the humidifier system on that DreamStation 2 is not an upgrade. If it s loud, you may want to double check all the new connections and humidifier seal. We have not had feedback to indicate that the DreamStation 2 is loud at all. You are welcome for the videos. Good Luck.

[@shawnstoll8489]

@@CPAPmyway If the sound is due to the humidifier seal can the seal be replaced?

[@taldozer]

I hate it. It is so inconvenient on every level. Just to fill the reservoir is a project... EVERY SINGLE NIGHT. I got this junk due to the recall of Dreamstation 1 which I absolutely loved. I used DS1 for 5+ years and it was a pleasure. This unit is horrible.

[@CPAPmyway]

I am sorry that you haven't had a good experience with the DreamStation 2. Thank you for the input though.

[@125southernnh2]

Just set mine up as a replacement to my Cancerstation 1. Seems like a pretty decent machine.

[@CPAPmyway]

Glad that you like the DreamStation 2 so far. Did you receive in as part of the recall with Philips?

[@lilybond6485]

Ha ! “Cancerstation”.

[@constancemcadam9423]

Is SoClean compatible with Dreamstation 2?

[@cartercarlson2422]

Nice video. However, with the air passing through the machine from the reservoir, how do you clean the air passageway from the reservoir to the tube attachment site on the front of the machine?

[@CPAPmyway]

That might be the best question so far. I am going to speak with Respironics today and get their recommendation. I've got my ideas on that, but let me get you the official answer before my opinion.

[@CPAPmyway]

So according to Respironics that passageway does not need regular cleaning as long as you keep the water reservoir clean. That means emptying the chamber and cleaning it daily, as well as a weekly deep clean that can be done in the top rack of the dishwasher. My opinion is similar. If you empty the chamber daily and allow it to air dry, you should have very little issue. This is a similar setup to the airsense cpap from resmed, and we haven't had any issues with the cleanliness of that CPAP passageway over the years.

[@hulk2406]

The dreamstation 1 that was recalled was much better designed. How did they manage to make the newer model worse?!

[@CPAPmyway]

Thanks for the input!

[@andreouellette2327]

Will be gettingDreamStation2 delivered tomorrow, as a replacement for recalled DreamStation1. Fantastic presentation and thank you excellent presentation. I think I will like this updated model.

[@CPAPmyway]

You are more than welcome. Glad that we could help you out with that new DreamStation 2 CPAP.

[@jackrandom4893]

Does you DS 1 tubing work?

[@CPAPmyway]

@@jackrandom4893 Yes the DreamStation 1 Tubing will connect to the DreamStation 2 CPAP.

[@robinmarande2751]

Can I use my soclean machine with the new unit?

[@stephicohu]

The only problem is the touch screen. It is a pain in the but to push the buttons.

[@CPAPmyway]

We have heard that the touchscreen on the new DreamStation 2 is not super responsive. I am not sure if that is purposeful or not, but we have heard that feedback. Thank you!

[@stephicohu]

@@CPAPmyway: so far it is working great!

[@gabrielgbayisomore5749]

What I do when the CPAP machine is switched on and "service required" immediately appears and the machine stops functioning?

[@CPAPmyway]

You have to contact your CPAP supplier to request a repair or replacement.

[@dmmd1949]

I recently received my replacement DreamStation 2. I am quite impressed with the new design and features. My question is what is the advantage of the heated tubing over the regular tubing. Thanks for your informative video.

[@CPAPmyway]

Glad that you are enjoying the DreamStation 2 CPAP. The heated tube will allow you to add the maximum amount of humidity without having condensation issues inside the tubing.

[@teddiane]

Terrific video to help me get started w/Dream Station 2. I have had the Dream Station before, and the instructions I got for DS 2 were lacking, like how to take off and wash the tank. Thanks for the great instructions!

[@CPAPmyway]

Glad it helped!

[@dw2898]

I just used my new DreamStation 2 last night. At first, I thought I wasn't getting as much airflow as I'm used to having and not knowing how to adjust it, I just left all the settings as is. I really did not notice any difference between this and the other DreamStation that was recalled. I see what you mean about the reservoir being a pain to handle vs. the other one. But I like that it takes up less space and the tote bag is smaller and the whole thing lighter and so I prefer that.

[@CPAPmyway]

Thank you so much for the feedback on the DreamStation 2 CPAP.

[@arpegioster]

Two questions: can the humidifier bw turned off? Can the the machine be set to turn off automatically? Thanks for your reply

[@CPAPmyway]

Yes on both. The Humidifier adjustment is in the Patient level menu and can be turned off. The Auto Off function is in the Clinical Menu level. The DreamStation 2 has an Auto on and an Auto off feature available there.

[@arpegioster]

@@CPAPmyway thanks. I was able to turn the humidifier off but I cannot find where in the clinical settings you enable auto off. Can you provide guidance? Thanks again

[@arpegioster]

@@CPAPmyway Clay, According to Philips the only way to turn auto on or off is through Philips Care Orchestrator to which user don't have access. Perhaps you do and can offer accurate advice.

[@arlenemurphy804]

Thank you so much for a wonderful video. I just got my new DS2 today and have it set up thanks to you. Will be anxious to try it and compare to DS1. One thing I’m not happy about already is the water reservoir..very awkward and inconvenient.. read out is very techy…could have been a larger format for us older folks… touch screen not great for big fingers and older people. But I will give it a try and hope for the best.

[@CPAPmyway]

Thank you for the feedback. Good Luck with your new DreamStation 2 CPAP!

[@viccolombia]

@@CPAPmyway Do you have used the water reservoir? I never used my humidifier

[@CPAPmyway]

@@viccolombia You should use distilled water in the DreamStation 2.

[@viccolombia]

@@CPAPmyway yes but do I need to used the humidifier ? I removed this container part on my old respironics.

[@CPAPmyway]

@@viccolombia Unfortunately you have to keep the humidifier portion attached to the DreamStation 2 CPAP. It is integrated now.

[@incrediblenonsense]

Just got my DS2, biggest complaint is how loud it gets on inhalation. Much louder than DS1 I believe. Everything else is okay, the humidifier really was absolutely terribly thought out. Such a pain in the arse to take it off and fill it up.

[@CPAPmyway]

Thanks for the input.

[@AuntieNina68]

Thank You! I just got mine because of the recall and I was dreading reading the directions. You made it pleasurable. Good Job!

[@CPAPmyway]

I am very glad that we could help.

[@treswatts]

Did the company cover the cost?

[@AuntieNina68]

@@treswatts Yes they did. It was replaced with no cost to me at all.

[@mikemcdonald4566]

Informative video. Can you use SoClean with the Dreamstation 2 and if so how do you hook it up?

[@michellehohlt1971]

Great question 🤔...I am hooking my husband's up right now and can't seem to figure out how I would connect them?

[@dongottlieb9134]

@@michellehohlt1971 I have a so clean also. Hmmm. Let me know thanks.

[@shiamel1]

Yes, I can’t figure it out

[@marcbooker6403]

I can use my SoClean just fine with my DreamStation 2. It connects to the front port of the CPAP.

[@pamwooten2003]

Is a So Clean machine compatible with the Dream Station 2? If so, how is it connected? I found your demonstration of the new C-Pap very helpful. Thank you!

[@CPAPmyway]

Glad the demo was helpful. To use the SoClean with the DreamStation 2 you would need to use a standard soclean adapter and standard CPAP tubing. Ill put a link to the adapter below for you. cpapmyway.com/store/soclean-2-humidifier-adapter

[@GlitteranGold]

I’ll probably end up buying this sleep apnea machine it’s cheaper then the other ones I’m seeing and it’s small so it’s not a hassle to take travelling or things like that.

[@CPAPmyway]

Thanks for the input.

[@rocadepoder7328]

Amazon la tiene

[@bettysmith1631]

Easier for m husband to use than the old one. The video was very helpful and easy to follow. Thanks 👍🏼

[@CPAPmyway]

Glad it was helpful!

[@saundrasealy9284]

How long is the wait time to receive the new machine . I registered my machine in July, 2021. I stopped using the old recalled machine last week . I was getting sick, several sinus infections. Thank you the video was informative .

[@CPAPmyway]

We have seen customers of ours receive theirs about 3 months after registration. I do not know if that will be typical or if everyone will vary. But they are moving. Philips told us last week that they are moving 50k CPAPs per week in the recall effort.

[@alhamric]

@@CPAPmyway That agrees with my experience, registered in June and got the device today. Only found out from the FedEx notification of something from Respironics coming two days ago.

[@CPAPmyway]

@@alhamric Thanks for the feedback. I hope that you are enjoying that new DreamStation 2 CPAP.

[@annettehare9548]

Can you do a video on how to package and send your old clap back to the company

[@CPAPmyway]

I will reach out to Philips and see if they can provide me some best practice details on that.

[@lindamariani6921]

great video. It would of been nice if the manufacture would of sent me a CD as I am a visual learner. I just got my replacement now dream station 2, not as bulky and heavy as my last one. Easy to operate and light weight.

[@CPAPmyway]

Thanks for the input.

[@jhurst25]

I feel like I'm not getting the best rest with mine. All my numbers and settings are good but I don't wake up feeling refreshed like with the first one. Yes, it's quiet but I also have accidentally left it running a few times. So far I'm not too impressed. Glad to not be breathing particulates though!

[@CPAPmyway]

Thank you for the feedback on the DreamStation 2.

[@shelbyfife3937]

This design is a complete failure. The touch screen on top is not useful unless you get vertical. ( the DS 1 was much more functional in that you could make adjustments while lying down) this machine is so damn loud, sounds like the flight deck on an aircraft carrier. If your going to review a product, I suggest you use the product for a while, otherwise you are promoting something you know little about. The old DS 1 was quiet and easy to use. This thing is a POS!

[@randystetson4036]

Is there a short demo video on how to pack the dream station 2 into the carry case?

[@CPAPmyway]

No, but we can sure make one in the future. Thanks for watching.

[@lawrencealberts898]

I just received this device due to the Phillips recall. I found your video very helpful in terms of the options available while using it. I have been using it now for a few weeks with pretty good results. Setting-up the Bluetooth was a bit of an issue, as the instructions to add the information on the card from the older device, didn’t transfer to DreamMapper. The DreamMapper will only use certain masks to record the data, so I have had to try several to find something I am comfortable with. That has been a good thing as I just watched your other video about discontinued masks. I have been wearing the same mask brand/style for 20 years, and it’s now history. My device came with the smaller heated tubing, and found I needed to increase the pressure to make it feel consistent with what I was experiencing before. Thank you for the information as it’s good to know a place where I can get answers quickly.

[@CPAPmyway]

Thanks for watching!

[@daphnewest911]

On my Dreamstation 1, I would remove the back, attach my hose and turn it on to dry my washed hose quickly. I also liked when traveling that I could leave the tank and just carry the smaller portion of the unit when tight on space. Can I do either of these with this newer unit? Thank you for your videos and help. Must appreciated.

[@CPAPmyway]

You are very welcome.

[@Eaton_Beavers247]

Does this one give you cancer like the dream station 1?

[@CPAPmyway]

Different foam for sure.

[@myradolan5312]

Loved your video. I have a dream station 2 and somehow the option to change the PSI disappeared, and went down to 5, when I needed 10 PSI. I was thrilled that I could find in your video how to change the setting, I didn't have to bring my machine into town to my lung Dr and have him change the PSI back up.. I was happy that I could fix it, and not to have to call my daughter to fix it. Thank you for your video.

[@CPAPmyway]

Happy to help. Thanks for watching.

[@ledee2337]

If you don't want to use the water can just use it without the back portion like the old dreamstation. The old one has a detachable humidifier so you can use it with or without the whole detachable back portion. Is it the same with dreamstation 2?

[@CPAPmyway]

The Humidifier is not detachable on the DreamStation 2. You would simply leave the water chamber empty and turn the humidifier to 0.

[@ledee2337]

Thanks!

[@kathrynheim7845]

Is the foam guaranteed safe? I saw another video in which they took the replacement cpap apart and the foam crumbled. I noticed breathing issues after using DS1 and I’m concerned.

[@CPAPmyway]

From my understanding, the new DreamStation 2 design is completely different. So there should be no foam issue on this model.

[@beechlvr7192]

How do you make the light go off after turning off the machine? My husband used the new Dreamstation 2 last night, and turned it off while it was still dark this morning. The light never shut off -- so just wondering how to fix that. Also, he tried to use the new smaller tubing, but it didn't connect to his mask, even with the adaptor. Is there another adaptor that might work? Thank you!

[@MsVormes]

You have to unplug it which is a pain. So my husband got a Wireless Remote Control for indoors. Lowes sells them. Mine is a Prime #0141479. So far it is working great. It cost $20.98.

[@tonybanner2982]

Tell the designers its not a cell phone its Cheap Plastic and much harder to clean

[@CPAPmyway]

We will pass that along.

[@davidrobertson398]

When does Philips plan to issue a new Dreamstation Go (after fixing the recall issue.) The Dreamstation 2 with its required humidifier does not look travel friendly.

[@CPAPmyway]

Unfortunately we are not real clear on the DreamStation Go. It seems like that may be repaired.

[@Joepipsquiggle]

The physical design of the DS-1 is far far better. The best solution is to Fine-tune the DS-1 electronics And Totally Eliminate the FOAM inside.

[@CPAPmyway]

There are customers that are receiving revamped DreamStation 1 CPAPs with the updated foam from what I hear.

[@FumiTheKitten]

I’ll never use another Phillips product again. How they’re handling the recall on they’re cancerous foam is despicable!

[@youtubedavidprice]

I just got my replacement today. Looks nice but haven't tried it yet.

[@bobcarter4343]

got my replacement today... life is good.

[@alhamric]

I have to say, the communication from Philips has been pretty slow. But to be fair, I think they have over 1M units replace and appear to be trying to get them out the door ASAP.

[@albert9302]

Great video. Just received and set up my DS2. I am unable to get to the settings you illustrate on your video. I press settings and I get device, but no comfort settings to adjust. Is it a defect or am I doing something wrong?

[@sanjaymishra1791]

If you have used the old DS, which comes with an SD card, and must have your data and settings stored. Once you put your SD card into your new device, it will repopulate your settings machine.

[@302mick]

Am having issues with DreamMapper application, syncing up my machine to the bluetooth

[@katystirman3482]

How do you correct the "adjust fit"?

[@CPAPmyway]

You would need to adjust your mask until the leak is accounted for. Might need to try a different mask if that is not possible.

[@CyrusLi]

I believe replacing all these machines as part of marketing technic and nothing else I have tones of supplies left from the old machine I have to discard them in the garbage they make a lot of money from this decision.

[@CPAPmyway]

Not a fun situation for anyone that is for sure.

[@jackets1001]

As others stated, this was a replacement for the recalled DS1. As Phillips did not include a manual, this video answered every question I had. thanks so much

[@CPAPmyway]

I am super glad that we could help you on the DreamStation 2 CPAP.

[@shirleygeorge7486]

@@CPAPmyway do I have to use Bluetooth

[@stephenbryson7720]

I have been sleeping with a cpap since 2001. My Dream Station is now on a recall, I'm getting my new Dream Station 2 tomorrow... can't wait

[@justinmickatavage7838]

How? Ive registered and called many times.. and its chaos over there.. They have no clue and I was told it could be up to a year. =)

[@scottparis6355]

@@justinmickatavage7838 My supplier said they don't expect new machines until September, at the earliest.

[@martinsanna5002]

Same here in Australia too Justin. Retail outlets washing their hands. No notifications to consumers. Have registered my Dreamstation but no confirmation via email that device recall registration has been received. Also this Dreamstation 2 is not affected by this recall as a different sound deadening component is used. So my question is how long have Philips Respironics known of this issue? Given the time to develop and have a new CPAP device approved, I have serious misgivings. I found out about the recall on a TV current affairs investigative program! Pathetic treatment of consumers!

[@danieldisanti8497]

Guess again

[@breaker1685]

Sounded super quiet - thats what you want! Wish the humidifier was easier to take out and in. Do not like the bland display!

[@CPAPmyway]

Thank you for the feedback. Have a great day!

[@lilybond6485]

Obviously a very cheap machine. Cheap plastic. IT’S NOT QUIET ! It makes noise with every breath which is totally annoying. CAN’T LIFT THE WATER CHAMBER LID. YOU HAVE TO REMOVE THE WATER CHAMBER FROM THE MACHINE. Are they not that bright at Phillips ? I run out of water - wake up - need to pull the chamber out of the machine to put water in it - then - I am totally awake with no chance of going back to sleep. Thanks Phillips.

[@CPAPmyway]

Thanks for the input.

[@theslimshadyist]

My supplier has most of the patient menu options disabled so I wanted to know if there is a way to hack into the DS2 so I can adjust the settings?

[@CPAPmyway]

You can, but that is usually done by your Dr or at least under the Drs supervision. Accessing the clinical menu is something that can be done at home. Just check with your Dr first on what to adjust and how to do it.

[@chartx11]

What is your opinion with regards to durability side by side to the dreamstation 1? While it looks smaller and lighter, looks like a cheap flimsy plastic (lid tabs etc...) concerned about holding up long term.

[@CPAPmyway]

Unfortunately I would have to say that time will tell. It is designed to last about 5 years. Philips makes quality products. So I don’t expect that there will be any durability issues. There are fewer moving parts on this model than the last (ie: door hinges and humidifier hinges). So it may be better on those little tacky parts that break.

[@cebruthius]

@@CPAPmyway In no way the real hinges on the DS humidifier (they are never stressed) are less durable than the tiny tabs on the DS2 humidifier that get flexed all the time.

[@halseytaylor9522]

The video is very well done...the Dreamstation 2 not so much. Got it courtesy of the recall. Humidifier is very difficult for someone with tremors. Adjustments for airflow are problematic, but better now thanks to your video. Screen is ridiculously difficult to read and the DS2 has no portability whatsoever. I'm dumping the Dreamstation 2 and getting a ResMed AirSense 10 or 11.

[@CPAPmyway]

Thank you for the kind comment. We do have airsense 10 and 11 in stock if you are really interested. Links below for reference. cpapmyway.com/store/cpap-machines/auto-cpap-machines/airsense-11-auto-cpap cpapmyway.com/store/cpap-machines/auto-cpap-machines/resmed-airsense-10-autoset-cpap-1

[@johnbrown6189]

I just got my new DS2. It took all most 3 years. And now the DS2 is under investigation by the FDA so it's going in the closet and l'm buying another brand. The only way l will use a Phillips product is if have no other choice.

[@CPAPmyway]

Thanks for the input.

[@willyspanker]

Received my recall unit. It worked for 2 days at one hour and 49 minutes each night. Will not power up. Have to call Philipps with the unit near a phone to walk me through the solution. Man was not meant to sleep with a mask on. Receiving this defective " new and improved " unit solidifies my reason for disliking cpap machines.

[@CPAPmyway]

That sounds like terrible luck. Might be a good idea to go with a different CPAP manufacturer.

[@benjarrell1122]

I really dislike the Dreamstation 2 compared to the Dreamstation 1. To remove the tank, I have to pick up and remove the unit from my nightstand. Because the power cord runs under the unit, it gets loose. Then I have to try to wrangle a reservoir full of water back into it without spilling, and place it back into the nightstand. I basically never use the humidity any more because of this. On the Dreamstation 1, the reservoir just popped up and you could remove/replace the reservoir without ever having to pick up the machine. The Dreamstation 1 seemed much more solidly made, whereas the Dreamstation 2 seems cheap and lightweight. I received the 2 as a replacement for my 1 which was recalled, but It seems like a downgrade all around.

[@CPAPmyway]

Thanks for the input.

[@danielgoupil9464]

I had a recall on my old CPAP machine that I never could adapt to. Philips replaced it with a DreamStation 2. I have never used it. My question: I want to sell the DreamStation 2 unit and would like to know what would be a reasonable asking price. Thank you for your informative video.

[@CPAPmyway]

I am really not sure about selling it to someone else. Everyone settings are different. You can email us directly for a purchase quote from us. [e-mail]

[@cjs4300]

Just got my ds2 due to the recall of the ds1..........what a flimsy, cheap feeling POS this thing is. Touch screen is TERRIBLE! And the humidifier is an absolute cheap piece of junk that is a huge pain in the ass. So disapointed! I feel we all got ripped off. Obviously they just slapped this thing together to get all the recalled machines back quickly. ds1 was way worth the money. The ds2 I wouldn't part half what I paid for the ds1 if I had the choice.

[@CPAPmyway]

Thanks for the input.

[@danhara7120]

Just bought dreamstation 2. This review really skips over all the bad parts, particularly the filling and handling of the humidifier. Much better and more accurate (negative reviews) available on youtube. I am going to buy the competitor today, even though this dreamstation 2 is new. The dreamstation 1 was better designed, but recalled for foam deterioriation and health issues. the replacment was the dreamstation 2, which they had to give away as replacements and appears to be built cheaply as a result. Many dreamstation 1 features are absent despite the new tech. The touch screen is also very poor, probably for similar reasons. new tech executed badly.

[@CPAPmyway]

Thanks for the input.

[@davejmw]

The Dreamstation 2 is a piece of garbage. Got my replacement for the Philips product that causes cancer only to find the machine makes whistling noises when breathing in. I then returned it and got a new one. Guess what!? Same problem. NEVER buying a Philips CPAP ever again.

[@CPAPmyway]

Geesh. That does not sound good. Thanks for the input.

[@mikefishermagic]

I received one of these due to the recall on the DS1. I have to refill the reservoir on the DS1 once or twice nightly (I live in AZ) Having to disconnect, open, refill, and replace the lid/unit insures that I'll be fully awake again. This design gets an F from me - if I could return it I would. DO NOT BUY ONE.

[@CPAPmyway]

Thanks for the input.

[@mariettahaywood121]

I received mine from the recall. Your video is nice. Thank you for doing it. The machine is not good. I can’t just add water from the top. I have to remove the humidifier, then open a top that completely detaches, and then put everything back together. Just inconvenient. The black color is probably intentional so we don’t see the black pieces of insulation falling apart like we could see on the white previous model. The tube on the front don’t swivel like the previous. It is stuck facing forward. Another inconvenience. It does not feel like having the same pressure. I will have to buff it up. The humidifier is also very small. Won’t allow 10 hrs of sleep on the weekends. So far, I don’t like it.

[@CPAPmyway]

Thanks for watching and for the input.

[@phatakraja]

Nice simple presentation, thanks. I have been using the old DreamStation for a few years. Now I have a new DreamStation 2. I want to start using the new machine. In your presentation, you did not mention anything about what to so with chip. Do I take the chip from the old machine out and insert in the new machine? Would it adjust all the parameters automatically, or do I need to note down the settings from my old machine and manually set those on the new machine? Also, it would be helpful if you provide instructions on how to set up and use the App. I am assuming it is necessary to use the App.

[@CPAPmyway]

Thanks for watching! The new machine should come with the settings preset for you. You can put the SD card in the new unit, but it will overwrite all the old data with your new data from the new CPAP. The SD card is just there to manually move the data if your internal cell modem is not working. App is not necessary, but most find it useful.

[@dgjunior5190]

Hi, does it also have a ramp button? Like the Dream Station one?

[@CPAPmyway]

It does have a ramp on the DreamStation 2, but it does not have that button like the DreamStation original.

[@Raysonet]

I have a DS2 and have used it before a couple of years ago due to recall. I stopped using it due to Kaiser not being able to monitor this machine so they gave me a new Resmed. The Resmed wont heat and I am going back to the DS2. I dont have anyone monotoring this nachine. I was just wondering if I can just use it on my own with the previous settings programed by the RT.

[@CPAPmyway]

I would think that you can use it just fine as long as your settings haven't changed.

[@cathybuis9439]

Machine is fine, but Philips customer service/questions is pitiful. Can't reach out by email, and they don't answer the phones. Took me 72 hours of calling to finally reach them. Anyway, just curios as to whether the machine has an audible alarm if my breathing stops for a long period of time? Thanks for the video it was very nice!

[@CPAPmyway]

Glad you enjoyed the DreamStation 2 video. There is not an alarm to my knowledge for apnea. However if yours is an Auto it should adjust the pressure to account for the apnea.

[@mattbaker833]

This dude lost ALL credibility when he said it was user friendly. Not only is the need to remove the tank from the humidifier to fill it a real pain in the @$$, you can't fill to the max level, or any jiggling when putting it back together will spill water out those tubes and down on the heater. This misleading review just guaranteed that I will NOT buy anything from cpapmyway.

[@CPAPmyway]

HAHA!! Thanks for the feedback.

[@maureenshibley47]

Hi. I'm trying to sync my DreamStation 2 to the DreamMapper app. It says to turn off the blower. How do I do that? There doesn't seem to be anything in the manual that explains how to do that

[@CPAPmyway]

You should be able to just hit the On/Off big round button to turn the blower off.

[@brianlewke9692]

have watched you videos on the dream station 2 and every time i watch them find more information , thank you

[@CPAPmyway]

Glad you like them!

[@bettychrispatterson9314]

I received this as a replacement for Dreamstaion 1 recall. I am having an issue with the SD memory card. This machine did not come with one. I bought a Phillips Respironics replacement. When I try to access the information for compliance , the Dream mapper software keeps saying the card is corrupt. I have replaced it with another memory card from the company, and with a SanDisc, same corruption notice. Anyone else with this problem? I need to have printed compliance records.

[@CPAPmyway]

You can use a generic SD card on that unit. You must get a pretty large capacity one though.

[@wiredspeaker5658]

Every 2-4 weeks...crap. They really should have a setting that reminds folks to change the filter. Do you think it's drop proof? I've yanked it off the night stand multiple times and now wonder if it even functions correctly.

[@CPAPmyway]

You can enable a reminder on the CPAP I think. If it is turning on and running then it survived. No error codes on screen = good to go.

[@p.b.edwards7287]

I can't believe you aren't a paid promoter. I received mine today and it is absolutely the worst machine I have ever used and considering I've been using one since the turn of the century, that's saying something. The deal breaker is the fact that it is horribly noisy when breathing in - completely unacceptable in this era. T he mandatory and awkward tank assembly is just ridiculous - I don't feel like playing Jenga in the dark at midnight! Who would design something like this when ergonomics is the hallmark of modern design? The display is tiny and hard to hit cleanly and I can't see the screen while lying prone as with DS 1. It feels cheap and I can see several points where plastic pins are likely to break. This machine is going back. So disappointed after waiting a year for the recall to be completed.

[@CPAPmyway]

Thanks for the input.

[@Garrettisonfire]

The dream station 2 sucks. With my DS1 I would get more air and it worked. I wake up feeling like I didn’t get any sleep now. The touch screen is garbage, the old one was higher quality and I could edit everything especially in admin mode. The old one is more user friendly. This new one is a piece of junk. The only positive is it is more quiet.

[@CPAPmyway]

Thanks for the feedback on the DreamStation 2 CPAP.

[@joycekelley6362]

I just got this replacement CPAP. It is certainly a downgrade. I can’t even use it until I take it clear across town…according to them to set up. I am so sad that my new CPAP is such a downgrade. It is cheap hard plastic. I saw another video in which the gentleman took the new machine apart and the white filter inside the machine fell apart just by him rubbing his fingers on it. Are we going to discover this filter breaks down and causes cancer too? Ugh…I hope this machine works as I start to use it but right now…I am very disappointed in his machine.

[@CPAPmyway]

Thanks for the input.

[@richarddamico5639]

Help!! We just got ours after waiting a full year!! Where is the mask?? It says there is one included but we can’t find a mask in the packing. How does this go over the face?? So confused….any help?

[@CPAPmyway]

Is this a new setup or a recall machine situation?

[@peterallard2755]

I just received my replacement CPAP Dreamstation 2. But it’s asking me to return my original recalled unit. That unit caused me medical issues that required me to discontinue use even prior to the recall notice. Should I have to return that unit, since I paid for it and own it…with the potential of it causing me possible permanently medical issues, or should I hold on to it foe evidence of defective material for litigation should I be diagnosed with serious effects from using it.

[@CPAPmyway]

That is up to you for sure.

[@weld3z]

Used system one from 2015 until today because of recall they will replace it with this unit and to be honest not happy to remove the whole thing to add water feeling bad now I'll try to find another brand.

[@CPAPmyway]

Thanks for the input.