Thanks

I have a bipap machine "Resmed curve vauto 10" and I've used the lowest pressure available for exhaling: 4cm pressure support of 2. I have played with PS with different values, 2, 3, 4, 5, up to 6. Inhaling is always a great feeling, but exhaling is so hard. I'm new, and I wonder if the mask is the problem? I'm using a brand new nose mask "Fisher & Paykel Brevida". Any ideas?

What they don’t tell you. Is you come out of pocket for the test and the machine

I supervise a sleep therapy dept and use a CPAP personally. This mask has been amazing since I started using it! Really lightweight and soft to the touch. Also, like you said, it seals so well even with some higher pressure settings!! Sometimes I wake up and get concerned briefly bc I don't think I'm wearing it till I come all the way to lol High marks all around from me.

Thank you for the info. I had a really hard time taking the screen off to see the filter. I notice in your video at 6:37 when you took the screen off , you broke the plastic cover. I managed using a screen driver for the first time.

Thank you sir! I recently bought this machine used for the other sleeping room and googled how to change these settings to adapt it for me and my mistake was to google it in German. All I could find was comments like „this is strictly forbidden“ and „go to your service partner“ and „you need experts to change the settings“. Again, thank you for making life a bit easier.

The headgear tightens up as soon as I get it on. Is that normal? Or is it supposed to lock in a position set by the user? You used words like "autofit headgear" and "pre-built tension level" which results in a white crease mark across the bottom of my nose (the "columella"?). My nose has a lot of structural cartilage separating the nostrils. Is there any way to adjust the tension?

Really helpful - much appreciated! I have SUBSCRIBED…

This mask is total crap!!!!!!!!!!!!!!!!!!!!!!!

Ooh I'd like to try this one!!! As a newbie I'm still getting used to wearing it to bed! Could this mask be used for a bipap too? My mom sleeps with a bipap and the masks are no bueno!

I use a ResMed S9 AutoSet, and I’ve removed the water tank, so the humidifying part is now empty. Benefits: I don’t need to refill the water every day. I don’t need to wash the water tank every other day. No more unpleasant smells from the water tank. I wake up without water on my face. Cons: None so far-everything’s been great! But I need scientific advise on how often should I clean the humidifying part. I just don't clean it now.

Thank you! I hope this helps my dry mouth

How do they recommend washing the fabric?

I am trying out the Resmed N30i after using the Philips Dreamwear for many years. The back head stretch is shifting up significantly causing leakage at the nose cradle. I am a man with short hair cut. Is there any other solution besides growing a pony tail for a couple of years? I have a big head, using the Philips L size frame. So, maybe the standard frame size of Resmed is too small? From Philips I currently use two different frames with different back head solutions. One is the hard plastic one shown in the video. The other one has a stretch similar to the Resmed one and with both I hardly have any creaping up issues. So, that does hint me a sizing issue. I did read about someone getting the hard plastic Philips one connected to the Resmed frame. But to be honest, as a huge sweating in bed man, the back head stretch is the main reason why I buy new masks couple of times a year. At a certain moment washing the stretch reguraly doesn't do the job anymore to get the smell out. Further the Resmed is a great mask. Very quiet compared to the Philips one. Better fitting nose cradle causing less leakage, if the back head stretch stays in place. Softe sides of the Resmed mask is easier than the softening fabrics Philips adds to the mask. The reliever of the elbow with the mask is good, but the Philips connection piece between the elbow and hose is easier to use wich makes that a bit easier for the Philips one at nights to go to the toilet. I do think the connection of the nose piece with the mask is better done at the Philips mask. But overall the quietness is the main difference in favor of the Resmed, if the back head creaping would not be a potential "deal braker" for me.

Concerned about maintenance, but willing to give it a shot

Well I used and still using the same memory foam mask for six months. Use mask wipes daily and once a week wash the mask in soapy water, no problems. I do see a small deterioration at the top of the mask with no problems of leaking. Headed for seven months.

Thank you very much for this excellent test. Made my choice easy.

The vitera full face cpap mask is great because of the breathable head gear

Thanks! Very helpful and informative! Just got my Resmed Airsense 11 today.

Thanks for your video. Very helpful!!

My dreamstation says it’s a good fit and keeps shutting off every 15 minutes.

I just received a replacement Dreamstation Go. I didn't get any kind of shipping notice it just showed up. I was using the airmini and frankly I can't wait to dump it.

Thank you so much. This video helped me fix my mom’s dream station in less than 10 seconds. You rock!

I liked the F30 features, but I could never get the leak below 20 no matter how I adjusted the straps. I switched to the F&P Evora Full. It seals quite well, but it's lacking in every other way. I'm tempted to try the F40.

I want that one. how much is the soap.

Great video thanks. I have very minor apnea but I snore so wife loves the A-11. Problem is, in auto mode it will randomly ramp to 20 and blow my friggin' sinuses out. Still want the auto, but needed a way to limit upper range (my typical quiet/healthy range being 6-8). Very appreciative.

You’re my hero

I can’t get on with this mask the vents at the front just leaks air all night long and drives me nuts

Wat should we adjust if our cpap is waking us up in night sweats?

Smart Start and Smart Stop does not appear on my Patient Menu. They do appear on the Clinical Menu and can be changed there.

Can I return it if I hate it and if my wife says it is too loud/noisy?

Great information and well explain,thanks

I keep waking up with blocked ears

How long does this cpap machine last? Does it start making noise after a while to let the user know that it is about to quit?

Does anyone have any negative comments about thr Transend micro? Where are the best prices?

Mine leaks a lot. It is comfortable and AHI scores are under 10.

Thanks for the helpful video! How can I see how many hours I slept with the cpap on during a night? I do see something that says "compliance" but no explanations of what this means (I assume it's a minimum) or how to access actual hours slept. Hoping I don't have to fiddle with the card/ or some reader/cell phone, etc. to find this info. The compliance always shows 7 hrs. This is not particularly useful to me.

I like the feel of this mask, but in spite of gradually increasing the pressure , I am having 10 or more events. The App says I have a good seal and leaks are 11 liters per minute

Zzzzzzz seriously i thought there was a secret menu

I've this mask for about 5 months. It is the first one I've ever worn. It is great and easy to maintain. I have been having issues operating the whole system just this week. At first I thought the problem was my settings on the machine. Then thinking about it, I starting looking at the mask for the issue, especially when breathing out and a lot of air noise. Thanks to your video I was able to fix the problem. It was the asphyxiation flap, which I did not know existed. It was pushed open and must have happened while I was cleaning the mask. Just realised this after you talking about the flap at 4:00 ... I can go back to having a good night sleep again. Thank you.

Do you actually feel the pressure I your nose with this mask?

My machine will not start blinking. Any suggestions?

Did they change the water chamber on the ResMed 10 because I see now they made with A metal circle at the bottom mine came with an Rectangle shape and I can’t find it anywhere?

Can you use this without using the water

I have a very large head and face- do you think this would fit me? AirFit P10 is too small for me

This is the mask I want. Is it good for side sleeper.

I just started CPAP about a week and a half ago, My wife started last year. I'm finding all your videos very helpful.. I'm probably going to be the designated CPAP cleaning person in our household. Thanks!

Does this work for the aircurve 10?

You could possibly tell people how to convert Phillips to ResMed such as nasal pillow to nasal pillow.